Protection of iron corrosion by stearic acid and stearic imidazoline self-assembled monolayers

A type of stearic imidazoline (IM) inhibitor was prepared using stearic acid (SA) and diethylenetriamine (DETA) as raw materials. The monolayers of IM and SA were assembled on the iron surface. The electrochemical characterization of stearic acid (SA) and stearic imidazoline (IM) on an oxide free iron surface had been studied. The monolayers of IM inhibitor were characterized by electrochemical impedance spectroscopy (EIS), electrochemical polarization curves, double layer capacitance, X-ray photoelectron spectroscopy (XPS) and molecular simulation. The results of electrochemical studies had illustrated that the inhibition efficiency of IM was higher than SA. XPS showed that the IM molecules adsorbed on the iron surface. The molecular simulation calculations showed that the IM molecules were tilted at an angle on the iron surface.     

Integrity of functional self-assembled monolayers on hydrogen-terminated silicon-on-insulator wafers

Silicon-on-insulator (SOI) wafers are commonly used to design microelectronics, energy conversion, and sensing devices. Thin solid films on the surfaces of SOI wafers have been a subject of numerous studies. However, SOI wafers modified by self-assembled monolayers (SAMs) that can also be used as functional device platforms have been investigated to a much lesser extent. In the present work, tert-butoxycarbonyl (t-boc, (CH₃)₃-C-O-C(O)-)-protected 1-amino-10-undecene monolayers were covalently attached to a H-terminated SOI (1 0 0) surface. The modified wafers were characterized by X-ray photoelectron spectroscopy to confirm the stability of the SAM/Si interface and the integrity of the secondary amine in the SAM. The transmission electron microscopy investigation suggested that this t-boc-protected 1-amino-10-undecene SAM produces atomically flat interface with the 2 μm single crystalline silicon of the SOI wafer, that the SiO_x and both available Si/SiO_x interfaces are preserved, and that the organic monolayers are stable, with apparent thickness of 1.7 nm, which is consistent with the result of the density functional theory modeling of the molecular features within a SAM.     

Interfacial kinetic enhancement of metal ion adsorption on binary mixed self-assembled monolayers

The adsorption of metal ions, a type of surface reaction on binary mixed self-assembled monolayers (SAMs) on a gold surface composed of 1,6-hexanedithiol (HDT) with 11-mercaptoundecanoic acid (MUA), was monitored by in situ surface plasmon resonance (SPR) measurements. The differential SPR reflectance (ΔR) enables the kinetics of adsorption of Pt²⁺ on the mixed SAMs to be investigated. Unlike single HDT SAM, kinetic analyses of the mixed SAMs showed that the rate of adsorption of Pt²⁺ was enhanced and that it was highly dependent on the fraction of MUA present. These SPR measurements suggest that the adsorption rate of metal ions can be readily manipulated simply by using mixed SAMs.     

Au(111)上烷烃硫醇SAMs表面应力的理论研究

应用已建立的关于金属表面吸附层中表面应力的统计热力学理论 ,计算了Au(111)上烷烃硫醇SAMs的表面应力及其与烷烃硫醇链长、吸附覆盖度的定量关系 .计算结果与实验相符 ,较好地解释了Berger等人的实验结果 ,特别是解决了在表面应力符号性质上理论与实验的矛盾 .在表面吸附层应力的多种物理起源中 ,通过底物的分子间作用力有着决定性的贡献 ,揭示了分子的吸附能间接地起着重要作用 .这与阴离子化学吸附体系Cl-/Au(111)的有关研究结果相同 .     

Step-wise decomposition process of azobenzene self-assembled monolayers

The step-wise decomposition of 4-(12-(dodecyldithio)dodecyloxy)azobenzene (AzoC24) in self-assembled monolayer (SAMs) on Au(1 1 1) was observed by thermal desorption spectroscopy (TDS) and X-ray photoelectron spectroscopy (XPS) under the ultra-high vacuum (UHV) condition. This decomposition process only occurred after the formation of the SAM.The TD spectra clearly showed two steps of thermal decomposition of the azobenzene moiety. At approximately 450 K, fragments of m/e = 77 and 105 were clearly observed. These fragments were decomposed species obtained by the breakage of the C-N bonds of the azobenzene moiety. At about 490 K, other fragment of m/e = 93 assigned to the phenoxy ion was detected. In order to examine the decomposition process, we measured the S 2p and N 1s XPS of the SAM at various temperatures. The results suggest that diazonium moiety is the first to be decomposed and the remaining structure is desorbed together with breakage of C-O bond between the phenoxy moiety and alkyl chain with increasing temperature.     

Nanopatterned surface with adjustable area coverage and feature size fabricated by photocatalysis

We report an effective approach to fabricate nanopatterns of alkylsilane self-assembly monolayers (SAMs) with desirable coverage and feature size by gradient photocatalysis in TiO₂ aqueous suspension. Growth and photocatalytic degradation of octadecyltrichlorosilane (OTS) were combined to fabricate adjustable monolayered nanopatterns on mica sheet in this work. Systematic atomic force microscopy (AFM) analysis showed that OTS-SAMs that have similar area coverage with different feature sizes and similar feature size with different area coverages can be fabricated by this approach. Contact angle measurement was applied to confirm the gradually varied nanopatterns contributed to the gradient of UV light illumination. Since this approach is feasible for various organic SAMs and substrates, a versatile method was presented to prepare tunable nanopatterns with desirable area coverage and feature size in many applications, such as molecular and biomolecular recognition, sensor and electrode modification.     

Substrate effects on photophysical properties of fluorescent self‐assembled monolayers (SAMs)

Substrate materials play an important role to modulate the photophysical properties of fluorescent self‐assembled monolayers (SAMs) constructed on them. The substrate–fluorophore interactions in fluorescent SAMs can affect their fluorescence intensity. Hence, it is important to take into account such alteration of fluorescence properties and study the underlying mechanisms. In this brief overview, substrate effects on fluorescence properties of chemisorbed or physisorbed fluorescent SAMs on two‐dimensional (chips) and three‐dimensional (nanoparticles) surfaces are highlighted. Examples of fluorescence quenching and enhancement on various substrate materials by different factors are discussed and analyzed. Additionally, some strategies to limit metallic substrate–fluorophore interactions are discussed briefly. Copyright © 2016 John Wiley & Sons, Ltd.     

Oxidation protection of copper surfaces using self-assembled monolayers of octadecanethiol

Self-assembled monolayers (SAMs) of alkanethiols adsorbed onto clean surfaces of face centred cubic (fcc) metals have been studied extensively for their ability to control the chemical functionality of the surface and as a means of preventing the oxidation and corrosion of the substrate metal. However, in many cases it has been found that on reactive substrates such as copper, it is difficult to prepare SAMs without the incorporation of some oxygen into the structure. In this work, self-assembled monolayers of octadecanethiol (ODT) were formed on copper foil substrates using a series of etching treatments to remove the native oxide layer prior to deposition of the ODT coating from a modified solution. X-ray photoelectron spectroscopy was used to analyse the SAMs and showed that monolayers with no detectable oxygen content could be produced. The effect of exposing the samples to air at different temperatures was monitored to examine the rate of the oxidation process, which was found to vary strongly with temperature. Samples stored at room temperature were found to oxidise relatively quickly, while those kept in a refrigerator were slower. Storing samples in a freezer dramatically reduced the oxidation of the copper, such that samples kept for 10 weeks still did not show any clear evidence of oxygen incorporation.     

Computing surface dipoles and potentials of self-assembled monolayers from first principles

We discuss methodological aspects of first principles calculations of surface dipoles and potentials in general, and surface-adsorbed self-assembled monolayers in particular, using density functional theory with a slab/super-cell approach. We show that calculations involving asymmetric slabs may yield highly erroneous results for the surface dipole and demonstrated the efficacy of a simple dipole correction scheme. We explain the importance of the electrostatic dipole distribution, show how to compute it, and establish conditions for the equivalence of calculations for the dipole distribution and the electrostatic potential distribution.     

Tribological behaviors of lanthanum-based phosphonate 3-aminopropyltriethoxysilane self-assembled films

Lanthanum-based thin films deposited on the phosphonate 3-aminopropyltriethoxysilane (APTES) self-assembled monolayer (SAM) were prepared on the hydroxylated glass substrate by a self-assembling process from specially formulated solution. Chemical compositions of the films and chemical state of the elements were detected by X-ray photoelectron spectrometry (XPS). The thickness of the films was determined with an ellipsometer, while the morphologies of the original and worn surfaces of the samples were analyzed by means of atomic force microscopy (AFM) and scanning electron microscopy (SEM), respectively. The tribological properties of the films sliding against GCr15 steel ball were evaluated on a UMT-2MT reciprocating friction and wear tester. As the results, the target film was obtained and reaction may have taken place between the film and the glass substrate. The tribological results show that lanthanum-based thin films are superior in reducing friction and resisting wear compared with APTES-SAM and phosphorylated APTES-SAM. SEM observation of the morphologies of worn surfaces indicates that the wear of APTES-SAM and the phosphorylated APTES-SAM is characteristic of brittle fracture and severe abrasion. Differently, slight abrasion and micro-crack dominate the wear of lanthanum-based thin films. The superior friction reduction and wear resistance of lanthanum-based thin films are attributed to the enhanced load-carrying capacity of the inorganic lanthanum particles in the lanthanum-based thin films as well as good adhesion of the films to the substrate.     

Improved aging performance of vapor phase deposited hydrophobic self-assembled monolayers

A hydrophobic self-assembled monolayer (SAM) of fluoro-octyl-trichloro-silane (FOTS) was deposited on silicon using a vapor phase technique. The aging of the hydrophobic layer was examined using water contact angle measurements. It has been found that while such monolayer films suffer from a loss of hydrophobicity with time, pre-immersion nitrogen annealing can significantly improve the aging characteristics of these monolayers. The effect of nitrogen annealing on the improved aging properties of SAM coatings has been investigated by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The hydrolytic stability and the effect of nitrogen annealing were studied by morphological evolution during immersion. A spontaneous formation of silane mounds on the surface of the monolayers was found by AFM. These mounds have been irreversibly transformed from initially uniform hydrophobic surface layers. It is highly probable that the compliance of these mounds can reasonably allow hydrophilic sites to be located around the mounds. Interestingly, the density of these mounds formation is very less on the annealed samples. XPS reveals a higher level of coverage by the N₂-annealed film due to agglomeration. A relative abundance of CF₃ and CF₂ moieties in the annealed film may explain the enhancement of the hydrophobicity as revealed by higher level of water contact angle. This hydrophobicity was found to be significantly stable in water. This novel finding explains the improved hydrophobic stability of FOTS monolayers as primarily a morpho-chemical effect that originates from the densification of the monolayers upon annealing.     

Molecular self-assembly and passivation of GaAs (0 0 1) with alkanethiol monolayers: A view towards bio-functionalization

Properties of as prepared or nanoengineered III-V semiconductor surfaces provide attractive means for photonic detection of different adsorbants from surrounding gaseous or liquid environments. To be practical, this approach requires that the surface is made selectively sensitive (functionalized) to targeted species. In addition, such surface has also to stay stable over extended period of time to make it available for rapid testing. Numerous reports demonstrate attractive properties of GaAs for sensing applications. One of the most fundamental issues relevant to these applications concerns the ability to functionalize chemically, or biologically, the surface of GaAs. The most studied method of GaAs surface functionalization is based on formation of self-assembled monolayers (SAMs) of various n-alkanethiols, HS-(CH₂)_n-T (T = CH₃, COOH, NH₂, etc.). In spite of multi-year research concerning this issue, it has only been recently that a comprehensive picture of SAMs formation on GaAs and an understanding of the natural limitation of the SAM-GaAs interface in some bio-chemical sensing architectures has begun to emerge.     

A novel fullerene lipoic acid derivative: Synthesis and preparation of self-assembled monolayers on gold

Synthesis and preparation of self-assembled monolayers of a novel fullerene lipoic acid derivative on gold are reported. The presence of densely packed SAMs was confirmed by ellipsometry and cyclic voltammetry. The electrochemical response of the modified electrode in organic media exhibits the first two redox peaks characteristic of the extended π-electron system of fullerene. C₆₀ surface coverage (1.4 × 10⁻¹⁰ mol cm⁻²) has been electrochemically determined by the redox process of the adsorbed fullerene moiety and by reductive desorption of the SAM in strong alkaline solution. Electrochemical data indicate that all four sulphur atoms are involved in the self-assembly process, providing an increase of SAM stability in comparison to mono or di-thiolated appended molecules. Visualisation of discrete fullerene molecules by scanning tunnelling microscopy supplied further evidence for gold modification and molecular distribution on the surface. Mixed monolayers of hexanethiol and fullerene derivatives in a proportion of 1:2 have been also studied with the purpose of controlling the amount and distribution of fullerene units on the gold surface.     

Construction of self-assembled monolayer terminated with N-heterocyclic carbene-rhodium(I) complex moiety

Functionalization of self-assembled monolayer (SAM) of alkanethiolate with metal containing unit is one of the versatile methods to obtain functional surfaces such as heterogeneous catalysts. However, organic molecules that strongly bind to transition metals at SAM terminal are limited. Recently N-heterocyclic carbenes (NHCs) such as cyclic diaminocarbenes have emerged as strongly σ-donating ligands forming a robust bond with broad spectrum of transition metals. In the present study, for the purpose of establishment of a new robust basement for heterogeneous metal catalysts, a SAM of the alkanethiolate terminated with NHC-rhodium(I) complex moiety was prepared by utilizing a newly designed disulfide molecule bearing NHC-metal complex terminals. X-ray photoelectron spectroscopy (XPS) analysis and angle resolved XPS measurement revealed successful formation of the Rh-complex-terminated SAM on a gold substrate. Infrared reflection absorption spectroscopy (IRRAS) analysis suggested that the linker methylene chains connecting the rhodium complex moiety and the gold surface are in a loosely packed structure. This unique chemical species, NHC, would be a promising candidate as a basement for the construction of functional surface.     

Stability of Phosphonic Self Assembled Monolayers (SAMs) on Cobalt Chromium (Co-Cr) Alloy under Oxidative conditions

Cobalt chromium (Co-Cr) alloys have been widely used in the biomedical arena for cardiovascular, orthopedic and dental applications. Surface modification of the alloy allows us to tailor the interfacial properties to address critical challenges of Co-Cr alloy in medical applications. Self assembled monolayers (SAMs) of Octadecylphosphonic acid (ODPA) have been used to form thin films on the oxide layer of the Co-Cr alloy surface by solution deposition technique. The SAMs formed were investigated for their stability to oxidative conditions of ambient laboratory environment over periods of 1, 3, 7 and 14 days. The samples were then characterized for their stability using X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and contact angle measurements. Detailed high energy XPS elemental scans confirmed the presence of the phosphonic monolayer after oxidative exposure which suggested that the SAMs were firmly attached to the oxide layer of Co-Cr alloy. AFM images gave topographical data of the surface and showed islands of SAMs on Co-Cr alloy surface, before and after SAM formation and also over the duration of the oxidative exposure. Contact angle measurements confirmed the hydrophobicity of the surface over 14 days. Thus the SAMs were found to be stable for the duration of the study. These SAMs could be subsequently tailored by modifying the terminal functional groups and could be used for various potential biomedical applications such as drug delivery, biocompatibility and tissue integration.     

XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces

The chemical constitution of functionalized supports is an important parameter that determines their performance in a broad range of applications, e.g. for immobilization of biomolecules. Supports with amino functionalized surfaces are also often used for DNA microarray experiments. However, spectral data which have been reported for surfaces with amino functionalities suffer from some inconsistencies. In this article a detailed XPS (X-ray photoelectron spectroscopy) and NEXAFS (Near edge X-ray absorption fine structure) database for amino functionalized surfaces is presented. Amino-terminated surfaces prepared from aliphatic and aromatic aminosilanes or aminothiols and a field sample are considered. Effects of aging in air and damage by radiation are addressed as well.     

Electrochemical and SERS spectroscopic investigations of 4-methyl-4H-1,2,4-triazole-3-thiol monolayers self-assembled on copper surface

Electrochemically anticorrosive behaviors of 4-methyl-4H-1,2,4-triazole-3-thiol (4-MTTL) monolayers self-assembled on copper surface have been investigated by electrochemical impedance spectroscopy (EIS), electrochemical polarization measurement and surface-enhanced Raman scattering (SERS) spectroscopy. The EIS mechanism of the copper surface adsorbed with 4-MTTL monolayers was fitted with the mode of R(QR)(QR)(CR). The electrochemical polarization experimental results indicated the high inhibitive efficiency of about 81.1%. Potential dependent SERS result suggests that 4-MTTL molecule was anchored at the copper surface via S⁶ and N² atoms with a tilted orientation, which resulting in a strong interaction between the 4-MTTL molecule and copper surface. The molecule tended to experience a transition state of the adsorption at the copper surface via S⁶ atom only as the potential applied at −0.5 V vs. SCE.     

Organosilane self-assembled multilayer formation based on activation of methyl-terminated surface with reactive oxygen species generated by vacuum ultra-violet excitation of atmospheric oxygen molecules

A xenon excimer lamp which irradiates vacuum ultra-violet (VUV) light at 172 nm in wavelength was applied to the photochemical surface conversion of n-octadecyltrimethoxysilane self-assembled monolayer (ODS-SAM) in the presence of atmospheric oxygen and subsequent multilayer fabrication. The terminal functional groups of ODS-SAM, -CH₃ groups, were converted into polar functional groups, like -COOH, by the reaction with atomic oxygen species generated photochemically through VUV excitation of atmospheric oxygen molecules. The structure of the resulting organosilane multilayer with different numbers of superimposed monolayers (from 1 to 11), prepared on a smooth and hydrophilic silicon substrate by the layer-by-layer (LbL) approach, was examined in terms of molecular organization as well as the intra- or interlayer binding modes in such novel films. Ellipsometry and grazing angle X-ray reflectivity measurements revealed that multilayer films of up to 11 discrete monolayers were successfully obtained, indicating that the self-assembly is a viable technique for the construction of relatively thick (16 nm and above) multilayer films.     

Electronic structure of self-assembled (fluoro)methylthiol monolayers on the Au(1 1 1) surface: Impact of fluorination and coverage density

We report the results of a density-functional theory study on a series of metal/organic interfaces consisting of self-assembled monolayers (SAMs) of methylthiol and mono-, di-, and tri-fluoromethylthiols, chemisorbed on the Au(1 1 1) surface. The effects of coverage density and extent of fluorination are examined. Both are found to strongly impact: (i) the component of the SAM dipole moment perpendicular to the surface; (ii) the SAM-induced work-function modification of the gold surface; and (iii) the energy-level alignments of both the highest occupied molecular levels and the molecular-signature states of the SAM with respect to the Fermi level of gold and, as a result, the ionization potential of the SAM when deposited on gold. Saturations of the effects are observed at the higher levels of fluorination and coverage.     

Self‐assembled monolayers of mercaptosuccinic acid monolayers on silver and gold surfaces designed for protein binding. Part II: vibrational spectroscopy studies on cytochrome c immobilization

An attempt has been made for using MSA‐modified electrodes as linkage monolayers for electrostatic and covalent binding of cytochrome c (Cc). For MSA monolayers grown from an aqueous solution on Ag, attachment of Cc in its native state is proved in the case of covalent bonding. Electrostatic immobilization of Cc at pH 7 results in presence of at least some amount of Fe²⁺ high‐spin configuration and/or Fe³⁺ oxidation state. Native protein Fe²⁺ low‐spin state of Cc is observed after applying a negative potential to the Ag electrode. The influence of the solvent used for the preparation of the MSA monolayer and thiol surface coverage of the Ag surface was studied. It was shown that the key factor to obtain the native structure of Cc is the successful blocking of the metal surface by the MSA linking layer. IRRAS measurements of MSA on monocrystalline gold (111) at neutral pH confirm the successful electrostatic Cc immobilization, which preserves the Fe²⁺ oxidation state of the chromophore on this substrate. Copyright © 2007 John Wiley & Sons, Ltd.