Enhanced electrical and mass transfer characteristics of acid-treated carbon nanotubes for capacitive deionization

Capacitive deionization (CDI) has attracted significant attention for the next generation water treatment due to its low energy consumption and environment friendly properties in comparison to widely established methods. For CDI technology to move forward, however, the development of carbon electrodes having superb electrosorption behavior is essential. In this study, we demonstrate the functionalization of carbon nanotubes (CNTs) via acid treatment shows enhanced electrochemical characteristics and effectively improves the wettability of the acid-treated CNTs (a-CNTs) via the addition of oxygen functional groups, leading to a higher electric double layer capacitance. Furthermore, defect formation in a-CNTs increases the conductivity and decreases the mass transfer resistance during CDI operation. CDI measurements confirmed a 270% increase in performance of a-CNTs in contrast to pristine CNTs (p-CNTs), attributable to the improved characteristics outlined above.     

Synthesis of multi-walled carbon nanotubes for NH3 gas detection

It has been recently demonstrated that carbon nanotubes (CNTs) represent a new type of chemical sensor capable of detecting a small concentration of molecules such as CO, NO₂, NH₃.In this work, CNTs were synthesized by chemical vapor deposition (CVD) on the SiO₂/Si substrate by decomposition of acetylene (C₂H₂) on sputtered Ni catalyst nanoparticles. Their structural properties are studied by atomic force microscopy, high-resolution scanning electron microscopy (HRSEM) and Raman spectroscopy. The CNTs grown at 700 °C exhibit a low dispersion in size, are about 1 μm long and their average diameter varies in the range 25–60 nm as a function of the deposition time. We have shown that their diameter can be reduced either by annealing in oxygen environment or by growing at lower temperature (less than 600 °C).We developed a test device with interdigital Pt electrodes on an Al₂O₃ substrate in order to evaluate the CNTs-based gas sensor capabilities. We performed room temperature current–voltage measurements for various gas concentrations. The CNT films are found to exhibit a fast response and a high sensitivity to NH₃ gas.     

Area-selectively sputtering the RuO2 nanorods array

The RuO₂ nanorods array is grown selectively on the SiO₂-patterned sapphire (SA) wafers using reactive sputtering. The area-selectivity is attributed to an early nucleation of RuO₂ and its fast surface coverage on SA (1 0 0) and (0 1 2), in contrast to the sluggish nucleation on glassy SiO₂ in the initial sputtering period. The growth domain is explored by investigating the temperature windows at sputtering power 40, 50, and 60 W. The low-temperature bound is limited by the mobility of precursors on SiO₂ surface, which enables the precursors to depart before aggregating into a large size to smear the non-growth region. The high-temperature bound is set by the horizontal growth which enlarges the rod width and deteriorates its one-dimensional feature. The temperature window shrinks with increasing sputtering power. The X-ray photoelectron spectra indicate the as-sputtered rod surface is ruthenium rich. The X-ray diffraction analysis shows that RuO₂ growth on SA (1 0 0) and (0 1 2) follows the epitaxial relations between RuO₂ and SA crystals.     

The influence of treatment duration on multi-walled carbon nanotubes functionalized by H2SO4/HNO3 oxidation

Variation in the nature of multi-walled carbon nanotubes (MWCNTs) subjected to different degrees of oxidation was investigated. The microstructure was determined by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) methods, and the surface chemistry was evaluated in terms of the functional groups determined by X-ray photoelectron spectroscopy (XPS) and thermal analysis-mass spectroscopy (TA-MS). In addition, TGA was used to indicate the thermal stability of the nanotubes. Results demonstrate that the graphitic structure of nanotubes oxidized with a mild mixture of H₂SO₄/HNO₃ was preserved. Decrease in the degree of crystallinity started with widening of the C(0 0 2) XRD diffraction peak, followed by this peak shifting towards lower angles. The oxygen content increased with increasing treatment time. A defect peak incorporated in deconvolution of XPS C1s spectra was helpful for detecting the generation of defect sites. The predominant surface functionalities of the nanotubes have been changed from basic to acidic groups after treatment for one day. The samples oxidized for two days had the most abundant surface -COOH and the highest oxidation resistance. The oxidation mechanism of MWCNTs in mild H₂SO₄/HNO₃ mixture was proposed, which was a successive and iterative process, including the initial attack on active sites, and next the hexagon electrophilic attack generating new defects and introducing more oxygen, and then the tubes becoming thinner and shorter.     

Purification of carbon nanotubes grown by thermal CVD

We show the results of a set of purifications on carbon nanotubes (CNT) by acid and basic treatments. CNTs were obtained by thermal decomposition of camphor at 850 °C in a CVD growth system, by means of a growth process catalyzed by iron clusters originating from the addition of ferrocene in the precursors mixture. The purification procedures involved HNO₃, H₂SO₄, HSO₃Cl and NaOH for different process temperatures.As-grown CNTs showed a consistent presence of metal catalyst (about 6 wt%), evidenced by TGA. The purification treatments led to a certain amount of opening of the CNT tips, with a consequent loss of metal catalyst encapsulated in tips. This is also confirmed by BET analysis, which showed an increase of the surface area density of CNT after the purification.FT-IR and XPS revealed the presence of carboxylic groups on the CNT surface chemically modified by the harsh environment of the purification process.Among the various treatments that have been tested, the 1:3 solution of nitric and sulphuric acid was the most effective in modifying the CNT surface and inducing the formation of functional groups.     

Surface modification of multi-walled carbon nanotubes by O2 plasma

The surface modification of multi-walled carbon nanotubes (MWCNTs) by O₂ plasma was carried out in this study. In order to achieve a relatively homogeneous treatment of MWCNTs powder, a rotating barrel fixed between the two discharge electrodes was used. The effect of plasma treatment parameters, such as power, time, and positions of samples (inside and outside the barrel), on the morphology and structure of MWCNTs surface was systematically analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The results showed that the direct discharge (outside the barrel) could result in not only a quick grafting of polar functional groups but also an easy damage of MWCNTs after longer time, particularly under intensive power. It was found that the surface of MWCNTs powder might be changed in three steps—expansion (loosed structure formed), peel off and oxidization with increasing of treatment time during the irradiation. In this way, a complete purification of MWCNTs powder could be finished within 30 min via plasma treatment. Our work suggested that plasma treatment could be a simple and nonpolluting method for a large scale purification of MWCNTs.     

Optical properties of TiO2 anatase - Carbon nanotubes composites studied by cathodoluminescence spectroscopy

Luminescence spectra obtained by electron bombardment (cathodoluminescence, CL) on TiO₂ (anatase)/carbon nanotubes (CNT) composite, show only one visible band at 498 nm, while the spectra taken from pure anatase samples show two bands at 498 and 545 nm. We demonstrate that the visible luminescence bands are originated by TiO₂ surface defects due to oxygen vacancies, and that this luminescence signal is independent of TiO₂ mineral form (anatase or rutile). Moreover we obtain that the 545 nm band quenching in TiO₂/CNT composites is caused by empty oxygen vacancies (OV) related to oxygen given from oxygen-rich pristine powder of carbon nanotubes. Our conclusions are also supported by X-ray photoelectron spectroscopy (XPS), SEM analysis and energy dispersed X-ray measurements (EDX). Furthermore we can confirm that the NIR TiO₂ luminescence emission is linked only to the presence of Ti rutile form as described in several works in literature.     

Fe掺杂CaCu3Ti4O12陶瓷的介电性能与弛豫特性研究

采用固相反应法制备了CaCu₃Ti_4-xFe_xO₁₂(0≤x≤0.2)陶瓷,通过X射线衍射、扫描电子显微镜、介电频谱和阻抗谱等手段研究了Fe对CaCu₃Ti₄O₁₂陶瓷的结构和介电性能的影响.研究发现：CaCu₃Ti_4-xFe_{x关键词： 巨介电常数 双阻挡层电容模型 界面极化}     

Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 nanotubes

A series of Nd-TiO₂ powders have been prepared by the sol-gel technique with neodymium nitrate and tetra-n-butyl titanium as raw materials, and then Nd-TiO₂ nanotubes were fabricated by the hydrothermal method with a 10 mol l⁻¹ NaOH solution. The as-prepared Nd-TiO₂ nanotubes were characterized by TEM, XRD, DRS, and XPS, and their photocatalytic activity was also tested in the case of the degradation of methyl orange in water. TEM photograph showed that Nd-TiO₂ nanotubes were about 10-20 nm in diameter, with the lengths range from 100 to 300 nm. TiO₂ nanotubes contained anatase and rutile crystallites. However, 0.3% Nd-TiO₂ nanotubes contained anatase crystallites, and only little rutile crystallites, so it is shown that neodymium doping hindered the phase transformation from anatase into rutile. Nd doping increased the visible-light absorption ability of Nd-TiO₂ nanotubes, and a red shift for Nd-TiO₂ nanotubes appeared when compared to TiO₂ nanotubes. XPS analysis showed that two types of oxygen existed on the photocatalyst surface, including metal-O and hydroxyl group, and more hydroxyl group was on the surface of 2% Nd-TiO₂ nanotubes than on the surface of TiO₂ nanotubes. Nd doping enhanced the photocatalytic activities of Nd-TiO₂ nanotubes, and 0.3% Nd-TiO₂ nanotubes exhibited the highest photocatalytic activity.     

A novel carbon nanotubes/Fe3O4 inorganic hybrid material: Synthesis, characterization and microwave electromagnetic properties

Magnetite particles with nanoscale sizes were self-assembled along multiwalled carbon nanotubes through a simple, effective and reproducible solvothermal method. The morphology, composition and phase structure of as-prepared hybrid materials were characterized by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results showed that denseness, size and crystallinity of magnetite can be altered by controlling the reaction parameters. Magnetization measurement indicated that both coercivity and saturation magnetization increased linearly with increasing magnetite concentration in the hybrid materials. Electromagnetic properties of the carbon nanotubes/magnetite inorganic hybrid materials were measured at 1∼18 GHz. The magnetic loss was caused mainly by ferromagnetic natural resonance, which is in agreement with the Kittel equation. The as-prepared inorganic hybrid materials are believed to have potential applications in the microwave absorbing area.     

Molecular origins of surface poisoning during CO oxidation over RuO2(1 1 0)

Metal oxides are of interest as environmental oxidation catalysts, but practical applications are often limited by poorly understood surface poisoning processes. RuO₂ is active for CO oxidation under UHV conditions but is deactivated by some surface poisoning processes at ambient pressures. In this work, we report kinetic models of surface poisoning during CO oxidation over RuO₂(1 1 0), based on data obtained from plane-wave, supercell DFT calculations. While a surface carbonate is stable at low O₂ pressures and high CO₂ exposures, it is not stable under catalytic conditions. A surface bicarbonate is more stable and deactivates the RuO₂ surface over a wide range of CO and oxygen pressures in the presence of trace amounts of water.     

Oxidation of H2/CO2 mixtures and effect of hydrogen initial concentration on the combustion of CH4 and CH4/CO2 mixtures: Experiments and modeling

An experimental investigation of the oxidation of hydrogen diluted by nitrogen in presence of CO₂ was performed in a fused silica jet-stirred reactor (JSR) over the temperature range 800-1050 K, from fuel-lean to fuel-rich conditions and at atmospheric pressure. The mean residence time was kept constant in the experiments: 120 ms at 1 atm and 250 ms at 10 atm. The effect of variable initial concentrations of hydrogen on the combustion of methane and methane/carbon dioxide mixtures diluted by nitrogen was also experimentally studied. Concentration profiles for O₂, H₂, H₂O, CO, CO₂, CH₂O, CH₄, C₂H₆, C₂H₄, and C₂H₂ were measured by sonic probe sampling followed by chemical analyses (FT-IR, gas chromatography). A detailed chemical kinetic modeling of the present experiments and of the literature data (flame speed and ignition delays) was performed using a recently proposed kinetic scheme showing good agreement between the data and this modeling, and providing further validation of the kinetic model (128 species and 924 reversible reactions). Sensitivity and reaction paths analyses were used to delineate the important reactions influencing the kinetic of oxidation of the fuels in absence and in presence of additives (CO₂ and H₂). The kinetic reaction scheme proposed helps understanding the inhibiting effect of CO₂ on the oxidation of hydrogen and methane and should be useful for gas turbine modeling.     

A comparative study of thermionic emission from vertically grown carbon nanotubes and tungsten cathodes

Thermionic emission from vertically grown carbon nanotubes (CNTs) by water-assisted chemical vapor deposition (WA-CVD) is investigated. I-V characteristics of WA-CNT samples exhibit strong Schottky effect leading to field proportionality factor β ∼ 10⁴ cm⁻¹in contrast to β ∼ 200 cm⁻¹ for the bare tungsten substrate. Non-contact atomic force microscopy imaging of CNT samples show propensity of nanoasperities over a scale of micron size over which the tungsten surface is seen to be atomically smooth. The values of root mean-square roughness for CNTs and W were found to be 24.2 nm and 0.44 nm respectively. The Richardson-Dushman plots yield work function values of Φ_CNT ? 4.5 and Φ_W ? 4.3 eV. Current versus time data shows that CNT cathodes are fifteen times noisier than tungsten cathode presumably due to increased importance of individual atomic events on the sharp CNT tips of bristle like structures. Power spectral density of current exhibited 1/f^ξ behavior with ξ ? 1.5, and 2 for W and CNTs. The former suggests surface diffusion whereas the latter indicates adsorption/desorption of atomic/molecular species as a dominant mechanism of noise generation.     

Preparation and performance of photocatalytic TiO2 immobilized on palladium-doped carbon fibers

Pd-modified carbon fibers (CFs) are obtained by a facile oxidation-reduction method and then dip-coated in a sol-gel of titanium dioxide (TiO₂) to form supported TiO₂/Pd-CF photocatalysts. The morphology of the Pd-modified CFs and the amount Pd deposited are characterized by field emission scanning electron microscopy and atomic absorption spectrometry, respectively. X-ray diffraction is used to investigate the crystal structures of the TiO₂ photocatalyst. Acid orange II is used as a model contaminant to evaluate the photocatalytic properties of the photocatalyst under UV irradiation. TiO₂/Pd-CF exhibits higher catalytic activity than TiO₂/CF towards the degradation of acid orange II. Optimum photocatalytic performance and support properties are achieved when the Pd particle loading is about 10.8 mg/g.     

Synthesis of superconductor MgCNi3 with carbon nanotubes

MgCNi3, an intermetallic compound superconductor with a cubic perovskite crystal structure, has been synthesized using fine Mg and Ni powders and carbon nanotubes （CNTs） as starting materials by the conventional powder metallurgy method. The composition, microstructure and superconductivity are characterized using x-ray diffraction （XRD）, energy dispersive x-ray （EDX） analysis, scanning electron microscopy （SEM）, and superconducting quantum interference device （SQUID） magnetometer. The results indicate that the phases of the synthesized samples are MgCNi3 （major phase） and traces of C and MgO. The MgCNi3 particle sizes range from several hundreds of nanometres to several micrometres. The onset superconducting transition temperature Tc of the MgCNi3 sample is about 7.2 K. The critical current density Jc is about 3.44 × 10^4 A/cm^2 calculated according to the Bean model from the magnetization hysteresis loop of the slab MgCNi3 sample at 5 K and zero applied field.     

CO adsorption on the reduced RuO2(1 1 0) surface

The O-bridge atoms on a stoichiometric RuO₂(1 1 0) surface were removed by reaction with CO. The resulting reduced surface was then further exposed to CO. By means of thermal desorption spectroscopy and high-resolution electron energy-loss spectroscopy three adsorbed CO states were identified on bridge sites and assigned to double-bonded, single-bonded, and single-bonded species in the vicinity of O-bridge residues, respectively.     

Carbon nanotubes growth from C2H2 and C2H4/NH3 by catalytic LCVD on supported iron–carbon nanocomposites

We report about the synthesis of carbon nanotubes by catalytic LCVD (C-LCVD), using a CW CO₂ laser and alternatively, C₂H₂/C₂H₄/NH₃ and C₂H₂/C₂H₄-containing gas mixtures. Different core–shell Fe–C nanocomposites (as synthesized and toluene extracted) were used employed as catalysts. The nanotubes grown from Fe–C residue demonstrate the lowest mean diameters. Prevalent curled and coiled morphologies are obtained for the CNTs grown in the presence of ammonia.     

Coating curly carbon nanotubes with monocrystalline Zn(BO2)2 and the mechanism of straightening the tubes

We overgrew single-crystalline Zn(BO₂)₂ coatings on carbon nanotubes (CNTs) for the first time. Scanning electron microscopy and transmission electron microscopy analyses revealed that the carbon nanotube-zinc borate composite rods are from tens to hundreds of nm in diameter. It is notable that the original curly tubes were straightened by the monocrystalline coatings. In addition, the crystal nucleation and growth on the surface of CNT were explained. We set a two-dimensional model, which is based on our experimental result, to qualitatively explain the mechanism of straightening the curly tubes by coating them with single-crystals.     

Effects of total CH4/Ar gas pressure on the structures and field electron emission properties of carbon nanomaterials grown by plasma-enhanced chemical vapor deposition

The effects of total CH₄/Ar gas pressure on the growth of carbon nanomaterials on Si (1 0 0) substrate covered with CoO nanoparticles, using plasma-enhanced chemical vapor deposition (PECVD), were investigated. The structures of obtained products were correlated with the total gas pressure and changed from pure carbon nanotubes (CNTs) through hybrid CNTs/graphene sheets (GSs), to pure GSs as the total gas pressure changed from 20 to 4 Torr. The total gas pressure influenced the density of hydrogen radicals and Ar ions in chamber, which in turn determined the degree of how CoO nanoparticles were deoxidized and ion bombardment energy that governed the final carbon nanomaterials. Moreover, the obtained hybrid CNTs/GSs exhibited a lower turn-on field (1.4 V/μm) emission, compared to either 2.7 V/μm for pure CNTs or 2.2 V/μm for pure GSs, at current density of 10 μA/cm².