Activation of gold on titania: adsorption and reaction of SO(2) on Au/TiO(2)(110)

Synchrotron-based high-resolution photoemission and first-principles density-functional slab calculations were used to study the interaction of gold with titania and the chemistry of SO(2) on Au/TiO(2)(110) surfaces. The deposition of Au nanoparticles on TiO(2)(110) produces a system with an extraordinary ability to adsorb and dissociate SO(2). In this respect, Au/TiO(2) is much more chemically active than metallic gold or stoichiometric titania. On Au(111) and rough polycrystalline surfaces of gold, SO(2) bonds weakly and desorbs intact at temperatures below 200 K. For the adsorption of SO(2) on TiO(2)(110) at 300 K, SO(4) is the only product (SO(2) + O(oxide) --> SO(4,ads)). In contrast, Au/TiO(2)(110) surfaces (theta;(Au) < or = 0.5 ML) fully dissociate the SO(2) molecule under identical reaction conditions. Interactions with titania electronically perturb gold, making it more chemically active. Furthermore, our experimental and theoretical results show quite clearly that not only gold is perturbed when gold and titania interact. The adsorbed gold, on its part, enhances the reactivity of titania by facilitating the migration of O vacancies from the bulk to the surface of the oxide. In general, the complex coupling of these phenomena must be taken into consideration when trying to explain the unusual chemical and catalytic activity of Au/TiO(2). In many situations, the oxide support can be much more than a simple spectator.     

Slow release of NO by microporous titanosilicate ETS-4

A novel approach to designing nitric oxide (NO) storage and releasing microporous agents based on very stable, zeolite-type silicates possessing framework unsaturated transition-metal centers has been proposed. This idea has been illustrated with ETS-4 [Na(9)Si(12)Ti(5)O(38)(OH)·xH(2)O], a titanosilicate that displays excellent NO adsorption capacity and a slow releasing kinetics. The performance of these materials has been compared to the performance of titanosilicate ETS-10, [(Na,K)(2)Si(5)TiO(13)·xH(2)O], of benchmark zeolites mordenite and CaA, and of natural and pillared clays. DFT periodic calculations have shown that the presence of water in the pores of ETS-4 promotes the NO adsorption at the unsaturated (pentacoordinated) Ti(4+) framework ions.     

Experimental and theoretical studies of surface nitrate species on Ag/Al2O3 using DRIFTS and DFT

Surface nitrate (NO3(-)) species on the Ag/Al2O3 play an important role in the selective catalytic reduction (SCR) of NOx. In this study, the formation and configuration of surface nitrate NO3(-)(ads) species on Ag/Al2O3 and Al2O3 in the oxidation of NO have been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations. Different nitrates species (bridging, bidentate and monodentate) were observed by in situ DRIFTS and validated by DFT calculations results. Attention was especially focused on the proposal of two different bidentate nitrates species (a normal bidentate and an isolated bidentate). In addition, the thermal stability of different surface nitrate species was discussed based on the adsorption energies calculations, DRIFTS, and temperature-programmed desorption (TPD) results. It was suggested that the decomposition and desorption of the surface nitrate species could be controlled by kinetics.     

Adsorption of NO on the M/c-ZrO2(110) (M = Ru,Rh) Surface: A Density Functional Theory Study

<正>The adsorption of NO on the M/c-ZrO_2(110)(M=Ru,Rh)surface has been studied with periodic slab model by PW91 approach of GGA within the framework of density functional theory.The results of geometry optimization indicated that the hollow site is energetically stable for Ru and Rh atoms' adsorption on the c-ZrO_2(110)surface with adsorption energies of 207.4 and 106.3 kJ/mol,respectively.When NO is adsorbed on the M/ZrO_2(110)surface,the N-down adsorption is the most stable.We also studied the adsorption of double NO on the M/c-ZrO_2(110)surface.Complete linear synchronous transit and quadratic synchronous transit approaches were used to search the transition state for dissociation reaction.NO has two possible dissociation passways:(1)2NO→N_2(g)+20(ads),(2)2NO→N_2O(g)+O(ads),and the former is easier than the latter based on the calculation results.     

First principles analysis of H2O adsorption on the (110) surfaces of SnO2, TiO2 and their solid solutions

Both associative and dissociative H(2)O adsorption on SnO(2)(110), TiO(2)(110), and Ti-enriched Sn(1-x)Ti(x)O(2)(110) surfaces have been investigated at low ((1)/(12) monolayer (ML)) and high coverage (1 ML) by density functional theory calculations using the Gaussian and plane waves formalism. The use of a large supercell allowed the simulation at low symmetry levels. On SnO(2)(110), dissociative adsorption was favored at all coverages and was accompanied by stable associative H(2)O configurations. Increasing the coverage from (1)/(12) to 1 ML stabilized the (associatively or dissociatively) adsorbed H(2)O on SnO(2)(110) because of the formation of intermolecular H bonds. In contrast, on TiO(2)(110), the adsorption of isolated H(2)O groups ((1)/(12) ML) was more stable than at high coverage, and the favored adsorption changed from dissociative to associative with increasing coverage. For dissociative H(2)O adsorption on Ti-enriched Sn(1-x)Ti(x)O(2)(110) surfaces with Ti atoms preferably located on 6-fold-coordinated surface sites, the analysis of the Wannier centers showed a polarization of electrons surrounding bridging O atoms that were bound simultaneously to 6-fold-coordinated Sn and Ti surface atoms. This polarization suggested the formation of an additional bond between the 6-fold-coordinated Ti(6c) and bridging O atoms that had to be broken upon H(2)O adsorption. As a result, the H(2)O adsorption energy initially decreased, with increasing surface Ti content reaching a minimum at 25% Ti for (1)/(12) ML. This behavior was even more accentuated at high H(2)O coverage (1 ML) with the adsorption energy decreasing rapidly from 145.2 to 101.6 kJ/mol with the surface Ti content increasing from 0 to 33%. A global minimum of binding energies at both low and high coverage was found between 25 and 33% surface Ti content, which may explain the minimal cross-sensitivity to humidity previously reported for Sn(1-x)Ti(x)O(2) gas sensors. Above 12.5% surface Ti content, the binding energy decreased with increasing coverage, suggesting that the partial desorption of H(2)O is facilitated at a high fractional coverage.     

用分子轨道理论研究NO气体在TiO2表面吸附

根据一氧化氮(NO)气体在二氧化钛(TiO)表面吸附和脱附的实验结果,揭示了气体脱附量的变化规律．利用MOPAC和GAUSSIAN分子轨道理论计算了在TiO2(110)表面上吸附NO分子的原子簇模型,电荷分布以及原子簇的能级,推断了NO在TiO(110)表面吸附的稳定性．     

Role of Zr4+ cations in NO2 adsorption on Ce(1-x)Zr(x)O2 mixed oxides at ambient conditions

Mixed oxides Ce(1-x)Zr(x)O(2) prepared by slow coprecipitation in NaOH were tested for NO(2) adsorption in dynamic conditions at room temperature. The samples were characterized before and after exposure to NO(2) by XRD, N(2)-adsorption, thermal analysis, potentiometric titration, and FT-IR. Mixed oxides show a better NO(2) adsorption capacity than the parent materials (CeO(2) and Zr(OH)(4)). This effect is linked to the presence of reduced cerium and oxygen vacancies induced by the addition of Zr(4+) cations to the structure. The results indicate that NO(2) reacts with Ce(3+) to form nitrite and nitrate species on the surface. The NO retention increases with an increase in the Zr(OH)(4) content. A decrease in the density of -OH groups on the surface after the exposure to NO(2), suggests their involvement in reactive adsorption of NO and/or NO(2). From the structural point of view, no real difference was observed on the Ce(1-x)Zr(x)O(2) materials before and after exposure to NO(2).     

The Ab Initio Studies of NO Chemisorption on TiO2(110) Surface

１ＩＮＴＲＯＤＵＣＴＩＯＮＴｉｔａｎｉｕｍｄｉｏｘｉｄｅｉｓａｔｒａｎｓｉｔｉｏｎ ｍｅｔａｌｏｘｉｄｅｔｈａｔｈａｓｐｒｏｖｅｄｉｔｓｕｓｅｆｕｌｎｅｓｉｎａｗｉｄｅｒａｎｇｅｏｆｃａｔａｌｙｔｉｃａｎｄｅｌｅｃｔｒｏｃｈｅｍｉｃａｌａｐｐｌｉｃａ...     

The importance of bulk Ti3+ defects in the oxygen chemistry on titania surfaces

The role of bulk defects in the oxygen chemistry on reduced rutile TiO(2)(110)-(1 × 1) has been studied by means of temperature-programmed desorption spectroscopy and scanning tunneling microscopy measurements. Following O(2) adsorption at 130 K, the amount of O(2) desorbing at ～410 K initially increased with increasing density of surface oxygen vacancies but decreased after further reduction of the TiO(2)(110) crystal. We explain these results by withdrawal of excess charge (Ti(3+)) from the TiO(2)(110) lattice to oxygen species on the surface and by a reaction of Ti interstitials with O adatoms upon heating. Important consequences for the understanding of the O(2)-TiO(2) interaction are discussed.     

Competitive adsorption of NO, NO2, CO2, and H2O on BaO(100): a quantum chemical study

Density functional theory (DFT) quantum chemical calculations are used to determine adsorption energies and geometries of NO, NO(2), CO(2), and H(2)O on a barium oxide (100) surface. The study includes two adsorption geometries for NO(2). All species form thermodynamically stable adsorbates, and adsorption strength increases in the order NO(2) < H(2)O < NO 相似文献   

First-principles investigation of transition metal atom M (M = Cu, Ag, Au) adsorption on CeO2(110)

Transition metal atom M (M = Cu, Ag, Au) adsorption on CeO(2)(110), a technologically important catalytic support surface, is investigated with density-functional theory within the DFT+U formalism. A set of model configurations was generated by placing M at three surface sites, viz., on top of an O, an O bridge site, and a Ce bridge site. Prior to DFT optimization, small distortions in selected Ce-O distances were imposed to explore the energetics associated with reduction of Ce(4+) to Ce(3+) due to charge transfer to Ce during M adsorption. Charge redistribution is confirmed with spin density isosurfaces and site projected density of states. We demonstrate that Cu and Au atoms can be oxidized to Cu(2+) and Au(2+), although the adsorption energy, E(ads), of Au(2+) is less favorable and, unlike Cu(2+), it has not been experimentally observed. Oxidation of Ag always results in Ag(+). For M adsorption at an O bridge site, E(ads)(2NN) > E(ads)(3NN) > E(ads)(1NN) where NN denotes the nearest neighbor Ce(3+) site relative to M. Alternatively, for M adsorption at a Ce bridge site, E(ads)(3NN) > E(ads)(2NN) > E(ads)(1NN). The adsorption behavior of M on CeO(2) (110) is compared with M adsorption on CeO(2)(111).     

The role of surface and subsurface point defects for chemical model studies on TiO2: a first-principles theoretical study of formaldehyde bonding on rutile TiO2(110)

We report a systematic investigation of the effects of different surface and subsurface point defects on the adsorption of formaldehyde on rutile TiO(2)(110) surfaces using density functional theory (DFT). All point defects investigated--including surface bridging oxygen vacancies, titanium interstitials, and subsurface oxygen vacancies--stabilize the adsorption significantly by up to 56 kJ mol(-1) at a coverage of 0.1 monolayer (ML). The stabilization is due to a decrease of the coordination (covalent saturation) of the surface Ti adsorption sites adjacent to the defects, which leads to a stronger molecule-surface interaction. This change in the Ti is caused by the removal of a neighboring atom (oxygen vacancies) or substantial lattice relaxations induced by the subsurface defects. On the stoichiometric reference surface, the most stable adsorption geometry of formaldehyde is a tilted η(2)-dioxymethylene (with an adsorption energy E(ads)=-125 kJ mol(-1)), in which a bond forms to a nearby bridging O atom and the carbonyl-O atom in the formaldehyde binds to a Ti atom in the adjacent fivefold coordinated lattice site. The η(1)-top configuration on five-coordinate Ti(4+) is much less favorable (E(ads)=-69 kJ mol(-1)). The largest stabilization is exerted by subsurface Ti interstitials between the first and second layers. These defects stabilize the η(2)-dioxymethylene structure by nearly 40 kJ mol(-1) to an adsorption energy of -164 kJ mol(-1). Contrary to popular belief, adsorption in a bridging oxygen vacancy (E(ads)=-86 kJ mol(-1)) is much less favorable for formaldehyde compared to the η(2)-dioxymethylene structures. From these results we conclude that formaldehyde will bind in the η(2)-dioxymethylene structure on the stoichiometric surface as well as in the presence of Ti interstitials and bridging oxygen vacancies. In the light of these substantial effects, we conclude that it is essential to include all the types of point defects present in typical, reduced rutile samples used for model studies, at realistic concentrations to obtain correct adsorption sites, structures, energetic, and chemi-physical properties.     

NO2在Ag/Pt(110)双金属表面上的吸附和分解

利用俄歇电子能谱(AES)和程序升温脱附谱(TDS)研究了NO₂在Ag/Pt(110)双金属表面的吸附和分解.室温下NO₂ 在Ag/Pt(110)双金属表面发生解离吸附, 生成NO(ads)和O(ads)表面吸附物种. 在升温过程中NO(ads)物种发生脱附或者进一步分解. 500 K时NO₂在Ag/Pt(110)双金属表面发生解离吸附生成O(ads)表面吸附物种. Pt 向Ag传递电子, 从而削弱Pt－O键的强度, 降低O(ads)从Pt 表面的并合脱附温度. 发现能够形成具有稳定组成的Ag/Pt(110)合金结构, 其表现出与Pt(110)-(1×2)相似的解离吸附NO₂能力, 但与O(ads)的结合明显弱于Pt(110)-(1×2). 该AgPt(110)合金结构是可能的低温催化直接分解氮氧化物活性结构.     

Theoretical study of adsorption of O((3)P) and H(2)O on the rutile TiO(2)(110) surface

The adsorption of oxygen atoms O(3P) on both ideal and hydrated rutile TiO(2)(110) surfaces is investigated by periodic density functional theory (DFT) calculations within the revised Perdew-Burke-Ernzerhof (RPBE) generalized gradient approximation and a four Ti-layer slab, with (2 x 1) and (3 x 1) surface unit cells. It is shown that upon adsorption on the TiO(2) surface the spin of the O atom is completely lost, leading to stable surface peroxide species on both in-plane and bridging oxygen sites with O-binding energies of about 1.0-1.5 eV, rather than to the kinetically unstable terminal Ti-O and terminal O-O species with smaller binding energies of 0.1-0.7 eV. Changes in O-atom coverage ratios between 1/3 and 1 molecular layer (ML) and coadsorption of H(2)O have only minor effects on the O-binding energies of the stable peroxide configurations. High O-atom diffusion barriers of about 1 eV are found, suggesting a slow recombination rate of adsorbed O atoms on TiO(2)(110). Our results suggest that the TiOOTi peroxide intermediate experimentally observed in photoelectrolysis of water should be interpreted as a single spinless O adatom on TiO(2) surface rather than as two Ti-O* radicals coupled together.     

Enhanced adsorption energy of Au1 and O2 on the stoichiometric TiO2(110) surface by coadsorption with other molecules

During heterogeneous catalysis the surface is simultaneously covered by several adsorbed molecules. The manner in which the presence of one kind of molecule affects the adsorption of a molecule of another kind has been of interest for a long time. In most cases the presence of one adsorbate does not change substantially the binding energy of another adsorbate. The calculations presented here show that the stoichiometric rutile TiO(2)(110) surface, on which one of the compounds -OH, Au(3), Au(5), Au(7), Na, K, or Cs or two different gold strips was preadsorbed, behaves differently: the binding energy of Au(1) or O(2) to such a surface is much stronger than the binding to the clean stoichiometric TiO(2)(110) surface. Moreover, the binding energy of Au(1) or O(2) and the amount of charge they take from the surface when they adsorb are the same, regardless of which of the above species is preadsorbed. The preadsorbed species donate electrons to the conduction band of the oxide, and these electrons are used by Au(1) or O(2) to make stronger bonds with the surface. This suggests that adding an electron to the conduction band of the clean stoichiometric TiO(2)(110) slab used in the calculation will affect similarly the adsorption energy of Au(1) or O(2). Our calculations show that it does. We have also studied how the preadsorption of Au(4) or Au(6) affects the binding of Au(1) or O(2) to the surface. These two gold clusters do not donate electrons to the surface when they bind to it and therefore should not influence substantially the binding energy of Au(1) or O(2) to the surface. However, adsorbing O(2) or Au(1) on the surface forces the clusters to change their structure into that of isomers that donate charge to the oxide. This charge is used by Au(1) or O(2) to bind to the surface and the energy of this bond exceeds the isomerization energy. As a result the surface with the isomerized cluster is the lowest energy state of the system. We believe that these results can be generalized as follows. The molecules that we coadsorbed with Au(1) or O(2) donate electrons to the oxide and are Lewis bases. By giving the surface high energy electrons, they turn it into a Lewis base and this increases its ability to bind strong Lewis acids such as Au(1) and O(2). We speculate that this kind of interaction is general and may be observed for other oxides and for other coadsorbed Lewis base-Lewis acid pairs.     

Periodic density functional theory study of methane activation over La(2)O(3): activity of O(2-), O(-), O(2)(2-), oxygen point defect,and Sr(2+)-doped surface sites

Results of gradient-corrected periodic density functional theory calculations are reported for hydrogen abstraction from methane at O(s)(2-), O(s)(-), O(2)(s)(2-) point defect, and Sr(2+)-doped surface sites on La(2)O(3)(001). The results show that the anionic O(s)(-) species is the most active surface oxygen site. The overall reaction energy to activate methane at an O(s)(-) site to form a surface hydroxyl group and gas-phase (*)CH(3) radical is 8.2 kcal/mol, with an activation barrier of 10.1 kcal/mol. The binding energy of hydrogen at an site O(s)(-) is -102 kcal/mol. An oxygen site with similar activity can be generated by doping strontium into the oxide by a direct Sr(2+)/La(3+) exchange at the surface. The O(-)-like nature of the surface site is reflected in a calculated hydrogen binding energy of -109.7 kcal/mol. Calculations indicate that surface peroxide (O(2(s))(2-)) sites can be generated by adsorption of O(2) at surface oxygen vacancies, as well as by dissociative adsorption of O(2) across the closed-shell oxide surface of La(2)O(3)(001). The overall reaction energy and apparent activation barrier for the latter pathway are calculated to be only 12.1 and 33.0 kcal/mol, respectively. Irrespective of the route to peroxide formation, the O(2)(s)(2-) intermediate is characterized by a bent orientation with respect to the surface and an O-O bond length of 1.47 A; both attributes are consistent with structural features characteristic of classical peroxides. We found surface peroxide sites to be slightly less favorable for H-abstraction from methane than the O(s)(-) species, with DeltaE(rxn)(CH(4)) = 39.3 kcal/mol, E(act) = 47.3 kcal/mol, and DeltaE(ads)(H) = -71.5 kcal/mol. A possible mechanism for oxidative coupling of methane over La(2)O(3)(001) involving surface peroxides as the active oxygen source is suggested.     

Role of adsorbed NO in N2O decomposition over iron-containing ZSM-5 catalysts at low temperatures

Transient response and temperature-programmed desorption/reaction (TPD/TPR) methods were used to study the formation of adsorbed NO(x) from N2O and its effect during N2O decomposition to O2 and N2 over FeZSM-5 catalysts at temperatures below 653 K. The reaction proceeds via the atomic oxygen (O)(Fe) loading from N2O on extraframework active Fe(II) sites followed by its recombination/desorption as the rate-limiting step. The slow formation of surface NO(x,ads) species was observed from N2O catalyzing the N2O decomposition. This autocatalytic effect was assigned to the formation of NO(2,ads) species from NO(ads) and (O)(Fe) leading to facilitation of (O)(Fe) recombination/desorption. Mononitrosyl Fe2+(NO) and nitro (NO(2,ads)) species were found by diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) in situ at 603 K when N2O was introduced into NO-containing flow passing through the catalyst. The presence of NO(x,ads) does not inhibit the surface oxygen loading from N2O at 523 K as observed by transient response. However, the reactivity of (O)(Fe) toward CO oxidation at low temperatures (<523 K) is drastically diminished. Surface NO(x) species probably block the sites necessary for CO activation, which are in the vicinity of the loaded atomic oxygen.     

Experimental and theoretical studies on the reaction of H(2) with NiO: role of O vacancies and mechanism for oxide reduction.

Reduction of an oxide in hydrogen is a method frequently employed in the preparation of active catalysts and electronic devices. Synchrotron-based time-resolved X-ray diffraction (XRD), X-ray absorption fine structure (NEXAFS/EXAFS), photoemission, and first-principles density-functional (DF) slab calculations were used to study the reaction of H(2) with nickel oxide. In experiments with a NiO(100) crystal and NiO powders, oxide reduction is observed at atmospheric pressures and elevated temperatures (250-350 degrees C), but only after an induction period. The results of in situ time-resolved XRD and NEXAFS/EXAFS show a direct NiO-->Ni transformation without accumulation of any intermediate phase. During the induction period, surface defect sites are created that provide a high efficiency for the dissociation of H(2). A perfect NiO(100) surface, the most common face of nickel oxide, exhibits a negligible reactivity toward H(2). The presence of O vacancies leads to an increase in the adsorption energy of H(2) and substantially lowers the energy barrier associated with the cleavage of the H-H bond. At the same time, adsorbed hydrogen can induce the migration of O vacancies from the bulk to the surface of the oxide. A correlation is observed between the concentration of vacancies in the NiO lattice and the rate of oxide reduction. These results illustrate the complex role played by O vacancies in the mechanism for reduction of an oxide. The kinetic models frequently used to explain the existence of an induction time during the reduction process can be important, but a more relevant aspect is the initial production of active sites for the rapid dissociation of H(2).     

SO2 on TiO2(110) and Ti2O3(102) nonpolar surfaces: a DFT study

Density functional molecular cluster calculations have been used to investigate the interaction of SO(2) with defect-free TiO(2)(110) and Ti(2)O(3)(102) surfaces. Adsorbate geometries and chemisorption enthalpies have been computed and discussed. Several local minima have been found for TiO(2)(110), but only one seems to be relevant for the catalytic conversion of SO(2) to S. In agreement with experiment, the bonding of SO(2) to Ti(2)O(3)(102) is much stronger than that on TiO(2)(110). Moreover, our results are consistent with the surface oxidation and the formation of strong Ti-O and Ti-S bonds. On both substrates, the bonding is characterized by a two-way electron flow involving a donation from the SO(2) HOMO into virtual orbitals of surface Lewis acid sites (), assisted by a back-donation from surface states into the SO(2) LUMO. However, the localization of surface states and the strength of back-donation are very different on the two surfaces. On TiO(2)(110), back-donation is weaker, and it involves unsaturated bridging O atoms, while on Ti(2)O(3)(102), it implies the -based valence band maximum and significantly weakens the S-O bond.     

Low-temperature reduction of NO(2) on oxidized Mo(110)

The reactions of nitrogen dioxide (NO(2)) were investigated on oxidized Mo(110) containing both chemisorbed oxygen and a thin film oxide. NO(2) reacts on both oxidized Mo(110) surfaces via a combination of reversible adsorption and reduction to NO, N(2), and trace amounts of N(2)O below 200 K. On the surface containing chemisorbed O, there is some complete dissociation of NO(2) to yield N(a) and O(a). N(2) forms at high temperatures through atom combination. On both surfaces, NO is the predominant product of NO(2) reduction. However, the chemisorbed layer which has a low oxidation state, and hence a greater capacity to accept oxygen, more effectively reduces NO(2). The selectivity for N(2) formation over N(2)O is greater for NO(2) as compared with NO on both surfaces studied. The selectivity changes are largely attributed to an increase in the concentration of Mo=O species and a change in the distribution of oxygen on the surface. Notably, more oxygen, in particular Mo=O moieties, is deposited by NO(2) reaction than by O(2) reaction, indicating that NO(2) is a stronger oxidant. The fact that there are several N-containing species on the surface at low temperatures may also affect the product distribution. On both surfaces, N(2)O(4), NO(2), and NO are identified by infrared spectroscopy upon adsorption at 100 K. All N(2)O(4) desorbs by 200 K, leaving only NO(2) and NO on the surface. Infrared spectroscopy of NO(2) on (18)O-labeled surfaces provides evidence for oxygen transfer or exchange between different types of sites even at low temperatures.