Cationic assembly of metal complex aggregates: structural diversity,solution stability,and magnetic properties

The tetradentate imino-carboxylate ligand [L](2)(-) chelates the equatorial sites of Ni(II) to give the complex [Ni(L)(MeOH)(2)] in which a Ni(II) center is bound in an octahedral coordination environment with MeOH ligands occupying the axial sites. Lanthanide (Ln) and Group II metal ions (M) template the aggregation of six [Ni(L)] fragments into the octahedral cage aggregates (M[Ni(L)](6))(x)(+) (1: M = Sr(II); x = 2,2: M = Ba(II); x = 2, 3: M = La(III); x = 3, 4: M = Ce(III); x = 3, 5: M = Pr(III); x = 3, and 6: M = Nd(III); x = 3). In the presence of Group I cations, however, aggregates composed of the alkali metal-oxide cations template various cage compounds. Thus, Na(+) forms the trigonal bipyramidal [Na(5)O](3+) core within a tricapped trigonal prismatic [Ni(L)](9) aggregate to give ((Na(5)O) subset [Ni(L)](9)(MeOH)(3))(BF(4))(2).OH.CH(3)OH, 7. Li(+) and Na(+) together form a mixed Li(+)/Na(+) core comprising distorted trigonal bipyramidal [Na(3)Li(2)O](3+) within an approximately anti-square prismatic [Ni(L)](8) cage in ((Na(3)Li(2)O) subset [Ni(L)](8)(CH(3)OH)(1.3)(BF(4))(0.7))(BF(4))(2.3).(CH(3)OH)(2.75).(C(4)H(10)O)(0.5), 8, while in the presence of Li(+), a tetrahedral [Li(4)O](2+) core within a hexanuclear open cage [Ni(L)](6) in ((Li(4)O) subset [Ni(L)](6)(CH(3)OH)(3))2ClO(4).1.85CH(3)OH, 9, is produced. In the presence of H(2)O, the Cs(+) cation induces the aggregation of the [Ni(L)(H(2)O)(2)] monomer to give the cluster Cs(2)[Ni(L)(H(2)O)(2)](6).2I.4CH(3)OH.5.25H(2)O, 10. Analysis by electronic spectroscopy and mass spectrometry indicates that in solution the trend in stability follows the order 1-6 > 7 > 8 approximately 9. Magnetic susceptibility data indicate that there is net antiferromagnetic exchange between magnetic centers within the cages.     

Thorium(IV)-selenate clusters containing an octanuclear Th(IV) hydroxide/oxide core

Four Th(IV) hydroxide/oxide clusters have been synthesized from aqueous solution. The structures of [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(15)(SeO(4))(8)·7.5H(2)O] (1), [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(17)(SeO(4))(8)·nH(2)O] (2), [Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)] (3), and Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)·nH(2)O (4) were determined using single crystal X-ray diffraction. Each structure consists of an octanuclear core, [Th(8)O(4)(OH)(8)](16+), that is built from eight Th(IV) atoms (four Th in a plane and two up and two down) linked by four "inner" μ(3)-O and eight "outer" μ(2)-OH groups. Compounds 3 and 4 additionally contain mononuclear [Th(H(2)O)(5)(SeO(4))(4)](4-) units that link the octamers into an extended structure. The octanuclear units are invariably complexed by two selenate anions that sit in two cavities formed by four planar Th(IV) and four extra-planar Th(IV) atoms, thus making [Th(8)O(4)(OH)(8)(SeO(4))(2)](12+) a common building block in 1-4. However, changes in hydration as well selenate coordination give rise to structural differences that are observed in the extended structures of 1-4. The compounds were also characterized by Raman spectroscopy. Density functional theory calculations were performed to predict the geometries, vibrational frequencies, and relative energies of different structures. Details of the calculated structures are in good agreement with experimental results, and the calculated frequencies were used to assign the experimental Raman spectra. On the basis of an analysis of the DFT results, the compound Th(8)O(8)(OH)(4)(SeO(4))(6) was predicted to be a strong gas phase acid but is reduced to a weak acid in aqueous solution. Of the species studied computationally, the dication Th(8)O(6)(OH)(6)(SeO(6))(6)(2+) is predicted to be the most stable in aqueous solution at 298 K followed by the monocation Th(8)O(7)(OH)(5)(SeO(6))(6)(+).     

Investigating the stability of the peroxide bridge in (mu-oxo)- and bis(mu-oxo)manganese clusters

The stability of the peroxide ligand bridging two manganese ions in the trinuclear oxomanganese complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(AcO)(2)(dien)(3)](2+), one of only two structurally characterized Mn clusters possessing a mu(1,2)-peroxo bridge, has been investigated using density functional theory. Although the peroxide O-O bond in the related bis(mu-oxo)-bridged complex [Mn(IV)(2)(mu-O)(2)(mu-O(2))(NH(3))(6)](2+) undergoes spontaneous cleavage upon two-electron reduction to the Mn(III)(2) dimer, calculations on the model complexes [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(8)](2+) and [Mn(III)(2)(mu-O)(mu-O(2))(NH(3))(6)(H(2)O)(2)](2+), which contain the same mu-oxo-,mu-peroxo-bridged core present in the trimer, indicate that the peroxide bridge remains intact, in agreement with experiment. Its stability can be attributed to a Jahn-Teller distortion resulting in elongation of the axial Mn-N bonds perpendicular to the Mn(2)(mu-O)(mu-O(2)) plane which in turn stabilizes the high-spin Mn(III) oxidation state. However, the difference in the energies of the bridged and cleaved peroxide structures is small (ca. 0.5 eV), the lowest energy structure depending on the nature of the terminal ligands. Calculations on the model trimer complex [Mn(III)(3)(mu(3)-O)(mu-O(2))(HCO(2))(2)(NH(3))(9)](2+) indicate that the energetic differences between the cleaved and uncleaved structures is even smaller (ca. 0.2 eV), and although the peroxo-bridge remains more or less intact, it is likely to be quite facile.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Aggregation control by homologous tripodal tetradentate amino acid ligands in oxo-bridged diiron(III) aquo complexes

Isoelectronic oxo-bridged diiron(III) aquo complexes of the homologous tripodal tetradentate amino acid ligands, N,N'-bis(2-pyridylmethyl)-3-aminoacetate (bpg(-)) and N,N'-bis(2-pyridylmethyl)-3-aminopropionate (bpp(-)), containing [(H(2)O)Fe(III)-(mu-O)-Fe(III)(H(2)O)](4+) cores, oligomerise, respectively, by dehydration and deprotonation, or by dehydration only, in reversible reactions. In the solid state, [Fe(2)(O)(bpp)(2)(H(2)O)(2)](ClO(4))(2) (1(ClO(4))(2)) exhibits stereochemistry identical to that of [Fe(2)(O)(bpg)(2)(H(2)O)(2)](ClO(4))(2) (2(ClO(4))(2)), with the ligand carboxylate donor oxygen atoms and the water molecules located cis to the oxo bridge and the tertiary amine group trans to it. Despite their structural similarity, 1(2+) and 2(2+) display markedly different aggregation behaviour in solution. In the absence of significant water, 1(2+) dehydrates and dimerises to give the tetranuclear complex, [Fe(4)(O)(2)(bpp)(4)](ClO(4))(4) (3(ClO(4))(4)), in which the carboxylate groups of the four bpp(-) ligands act as bridging groups between two [Fe(2)(O)(bpp)(2)](2+) units. Under similar conditions, 2(2+) dehydrates and deprotonates to form dinuclear and trinuclear oligomers, [Fe(2)(O)(OH)(bpg)(2)](ClO(4)) (4ClO(4)) and [Fe(3)(O)(2)(OH)(bpg)(3)](ClO(4)) (5(ClO(4))), related by addition of 'Fe(O)(bpg)' units. The trinuclear 5(ClO(4)), characterised crystallographically as two solvates 5(ClO(4)).3H(2)O and 5(ClO(4)).2MeOH, is based on a hexagonal [Fe(3)(O)(2)(OH)(bpg)(3)](+) unit, formally containing one hydroxo and two oxo bridges. The different aggregation behaviour of 1(ClO(4))(2) and 2(ClO(4))(2) results from the difference of one methylene group in the pendant carboxylate arms of the amino acid ligands.     

Novel lanthanoid thioantimonates: the first coexistence of different types of thioantimonate anions in the same framework

Two novel lanthanoid thioantimonates [Sm(4)(tepa)(4)(μ-η(2),η(3)-Sb(3)S(7))(2)(μ-Sb(2)S(4))] (1, tepa = tetraethylenepentamine) and [Eu(2)(tepa)(2)(μ-SbS(3))(μ-OH)](2)(SbS(4))(OH)·H(2)O (2) were solvothermally synthesized. Compound 1 represents the only example of different types of [Sb(3)S(7)](5-) and [Sb(2)S(4)](2-) anions coexisting in the same lanthanoid thioantimonate framework, while 2 displays rare mixed-valent Sb(3+)/Sb(5+) character with the Sb(3+) in a noncondensed pyramid [Sb(III)S(3)](3-). The theoretical band structure and luminescence properties have also been investigated.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

1H NMR, electron paramagnetic resonance, and density functional theory study of dinuclear pentaammineruthenium dicyanamidobenzene complexes

Paramagnetic (1)H NMR and electron paramagnetic resonance (EPR) spectroscopies and density functional theory (DFT) spin density calculations were selectively performed on the [{(NH(3))(5)Ru}(2)(μ-L)](3+,?4+,?5+) complexes, where L is 2,3,5,6-tetrachloro-, 2,5-dichloro-, 2,5-dimethyl-, and unsubstituted 1,4-dicyanamidobenzene dianion, to characterize the electronic structure of these complexes. EPR spectra of the [{(NH(3))(5)Ru}(2)(μ-L)](3+) complexes in N,N'-dimethylformamide at 4 K showed a ruthenium axial signal, and thus the complexes are [Ru(II),L(2-), Ru(III)] mixed-valence systems. DFT spin density calculations of [{(NH(3))(5)Ru}(2)(μ-L)](3+) where L = 1,4-dicyanamidobenzene dianion gave mostly bridging-ligand centered spin distribution for both vacuum and implicit solvent calculations, in poor agreement with EPR, but more realistic results were obtained when explicit electrostatic interactions between solute and solvent were included in modeling. For the [{(NH(3))(5)Ru}(2)(μ-L)](4+) complexes, EPR spectroscopy showed no signal down to 4 K. Nevertheless, solvent-dependent (1)H NMR data and analysis support a [Ru(III),L(2-), Ru(III)] state. Hyperfine coupling constants (A(c)/h) of trans- and cis-ammine and phenyl hydrogens were determined to be 17.2, 3.8, and -1.5 MHz respectively. EPR studies of the [{(NH(3))(5)Ru}(2)(μ-L)](5+) complexes showed a metal-radical axial signal and based on previously published (1)H NMR data, a [Ru(IV),L(2-), Ru(III)] state is favored over a [Ru(III),L(-), Ru(III)] state.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

Polyoxoanions Derived from [gamma-SiO(4)W(10)O(32)](8-)-Containing Oxo-Centered Dinuclear Chromium(III) Carboxylato Complexes: Synthesis and Single-Crystal Structural Determination of [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)](5-)

The previously unknown heteropolyoxometalates [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCR)(2)(OH(2))(2)](5-) (R = H, CH(3)) have been prepared by the reaction of [gamma-SiO(4)W(10)O(32)](8-) with [Cr(OH(2))(6)](3+) in formate or acetate buffer solution. Isolation of these new Cr(III)-substituted polyoxometalates was accomplished both as Cs(+) salts and as the Bu(4)N(+) salt for the acetate-containing anion. The compounds were characterized by elemental analysis, UV/vis, IR, and ESR spectroscopy, and cyclic voltammetry. The single-crystal X-ray structural analysis of (Bu(4)N)(3)H(2)[gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)].3H(2)O [P2(1)2(1)2(1); a = 17.608(12), b = 20.992(13), c = 24.464(11) ?; Z = 4; R = 0.057 for 6549 observed independent reflections] reveals that the two corner-linked CrO(6) octahedra are additionally bridged by two acetate groups, demonstrating the relationship to the well-studied oxo-centered trinuclear carboxylato complexes of Cr(III).     

Dimer-of-dimers model for the oxygen-evolving complex of photosystem II. Synthesis and properties of [MnIV4O5(terpy)4(H2O)2](ClO4)6

A dimer-of-dimers model compound for the oxygen-evolving complex of photosystem II, [[(H(2)O)(terpy)Mn(IV)(micro-O)(2)Mn(IV)(terpy)](2)(micro-O)](ClO(4))(6) (terpy = 2,2':6',2' '-terpyridine), has been prepared and characterized by X-ray crystallography and ESI-MS. Low pH was found to promote the disproportionation of [Mn(III/IV)(2)O(2)(terpy)(2)(OH(2))(2)](3+) to Mn(2+) and a Mn(IV/IV)(2)O(2)(terpy)(2) species; the latter complex slowly dimerizes to form the title complex. Protonation of a micro-oxo bridge is proposed to initiate the disproportionation, based on analogy with the [Mn(III/)(IV)(2)O(2)(bpy)(4)](3+) system.     

Syntheses and crystal structures of a series of alkaline earth vanadium selenites and tellurites

Six new novel alkaline-earth metal vanadium(V) or vanadium(IV) selenites and tellurites, namely, Sr(2)(VO)(3)(SeO(3))(5), Sr(V(2)O(5))(TeO(3)), Sr(2)(V(2)O(5))(2)(TeO(3))(2)(H(2)O), Ba(3)(VO(2))(2)(SeO(3))(4), Ba(2)(VO(3))Te(4)O(9)(OH), and Ba(2)V(2)O(5)(Te(2)O(6)), have been prepared and structurally characterized by single crystal X-ray diffraction analyses. These compounds exhibit six different anionic structures ranging from zero-dimensional (0D) cluster to three-dimensional (3D) network. Sr(2)(VO)(3)(SeO(3))(5) features a 3D anionic framework composed of VO(6) octahedra that are bridged by SeO(3) polyhedra. The oxidation state of the vanadium cation is +4 because of the partial reduction of V(2)O(5) by SeO(2) at high temperature. Ba(3)(VO(2))(2)(SeO(3))(4) features a 0D [(VO(2))(SeO(3))(2)](3-) anion. Sr(V(2)O(5))(TeO(3)) displays a unique 1D vanadium(V) tellurite chain composed of V(2)O(8) and V(2)O(7) units connected by tellurite groups, forming 4- and 10-MRs, whereas Sr(2)(V(2)O(5))(2)(TeO(3))(2)(H(2)O) exhibits a 2D layer consisting of [V(4)O(14)] tetramers interconnected by bridging TeO(3)(2-) anions with the Sr(2+) and water molecules located at the interlayer space. Ba(2)(VO(3))Te(4)O(9)(OH) exhibits a one-dimensional (1D) vanadium tellurite chain composed of a novel 1D [Te(4)O(9)(OH)](3-) chain further decorated by VO(4) tetrahedra. Ba(2)V(2)O(5)(Te(2)O(6)) also features a 1D vanadium(V) tellurites chain in which neighboring VO(4) tetrahedra are bridged by [Te(2)O(6)](4-) dimers. The existence of V(4+) ions in Sr(2)(VO)(3)(SeO(3))(5) is also confirmed by magnetic measurements. The results of optical diffuse-reflectance spectrum measurements and electronic structure calculations based on density functional theory (DFT) methods indicate that all six compounds are wide-band gap semiconductors.     

C-H activation by a mononuclear manganese(III) hydroxide complex: synthesis and characterization of a manganese-lipoxygenase mimic?

Lipoxygenases are mononuclear non-heme metalloenzymes that regio- and stereospecifically convert 1,4-pentadiene subunit-containing fatty acids into alkyl peroxides. The rate-determining step is generally accepted to be hydrogen atom abstraction from the pentadiene subunit of the substrate by an active metal(III)-hydroxide species to give a metal(II)-water species and an organic radical. All known plant and animal lipoxygenases contain iron as the active metal; recently, however, manganese was found to be the active metal in a fungal lipoxygenase. Reported here are the synthesis and characterization of a mononuclear Mn(III) complex, [Mn(III)(PY5)(OH)](CF(3)SO(3))(2) (PY5 = 2,6-bis(bis(2-pyridyl)methoxymethane)pyridine), that reacts with hydrocarbon substrates in a manner most consistent with hydrogen atom abstraction and provides chemical precedence for the proposed reaction mechanism. The neutral penta-pyridyl ligation of PY5 endows a strong Lewis acidic character to the metal center allowing the Mn(III) compound to perform this oxidation chemistry. Thermodynamic analysis of [Mn(III)(PY5)(OH)](2+) and the reduced product, [Mn(II)(PY5)(H(2)O)](2+), estimates the strength of the O-H bond in the metal-bound water in the Mn(II) complex to be 82 (+/-2) kcal mol(-)(1), slightly less than that of the O-H bond in the related reduced iron complex, [Fe(II)(PY5)(MeOH)](2+). [Mn(III)(PY5)(OH)](2+) reacts with hydrocarbon substrates at rates comparable to those of the analogous [Fe(III)(PY5)(OMe)](2+) at 323 K. The crystal structure of [Mn(III)(PY5)(OH)](2+) displays Jahn-Teller distortions that are absent in [Mn(II)(PY5)(H(2)O)](2+), notably a compression along the Mn(III)-OH axis. Consequently, a large internal structural reorganization is anticipated for hydrogen atom transfer, which may be correlated to the lessened dependence of the rate of substrate oxidation on the substrate bond dissociation energy as compared to other metal complexes. The results presented here suggest that manganese is a viable metal for lipoxygenase activity and that, with similar coordination spheres, iron and manganese can oxidize substrates through a similar mechanism.     

Role of the uranyl oxo group as a hydrogen bond acceptor

Density functional theory calculations have been used to evaluate the geometries and energetics of interactions between a number of uranyl complexes and hydrogen bond donor groups. The results reveal that although traditional hydrogen bond donors are repelled by the oxo group in the [UO(2)(OH(2))(5)](2+) species, they are attracted to the oxo groups in [UO(2)(OH(2))(2)(NO(3))(2)](0), [UO(2)(NO(3))(3)](-), and [UO(2)Cl(4)](2-) species. Hydrogen bond strength depends on the equatorial ligation and can exceed 15 kcal mol(-1). The results also reveal the existence of directionality at the uranyl oxo acceptor, with a weak preference for linear U═O---H angles.     

Nitrile hydration by thiolate- and alkoxide-ligated Co-NHase analogues. Isolation of Co(III)-amidate and Co(III)-iminol intermediates

Nitrile hydratases (NHases) are thiolate-ligated Fe(III)- or Co(III)-containing enzymes, which convert nitriles to the corresponding amide under mild conditions. Proposed NHase mechanisms involve M(III)-NCR, M(III)-OH, M(III)-iminol, and M(III)-amide intermediates. There have been no reported crystallographically characterized examples of these key intermediates. Spectroscopic and kinetic data support the involvement of a M(III)-NCR intermediate. A H-bonding network facilitates this enzymatic reaction. Herein we describe two biomimetic Co(III)-NHase analogues that hydrate MeCN, and four crystallographically characterized NHase intermediate analogues, [Co(III)(S(Me2)N(4)(tren))(MeCN)](2+) (1), [Co(III)(S(Me2)N(4)(tren))(OH)](+) (3), [Co(III)(S(Me2)N(4)(tren))(NHC(O)CH(3))](+) (2), and [Co(III)(O(Me2)N(4)(tren))(NHC(OH)CH(3))](2+) (5). Iminol-bound 5 represents the first example of a Co(III)-iminol compound in any ligand environment. Kinetic parameters (k(1)(298 K) = 2.98(5) M(-1) s(-1), ΔH(?) = 12.65(3) kcal/mol, ΔS(?) = -14(7) e.u.) for nitrile hydration by 1 are reported, and the activation energy E(a) = 13.2 kcal/mol is compared with that (E(a) = 5.5 kcal/mol) of the NHase enzyme. A mechanism involving initial exchange of the bound MeCN for OH- is ruled out by the fact that nitrile exchange from 1 (k(ex)(300 K) = 7.3(1) × 10(-3) s(-1)) is 2 orders of magnitude slower than nitrile hydration, and that hydroxide bound 3 does not promote nitrile hydration. Reactivity of an analogue that incorporates an alkoxide as a mimic of the highly conserved NHase serine residue shows that this moiety facilitates nitrile hydration under milder conditions. Hydrogen-bonding to the alkoxide stabilizes a Co(III)-iminol intermediate. Comparison of the thiolate versus alkoxide intermediate structures shows that C≡N bond activation and C═O bond formation proceed further along the reaction coordinate when a thiolate is incorporated into the coordination sphere.     

Synthesis, crystal structure and optical properties of [Ag(UO2)3(OAc)9][Zn(H2O)4(CH3CH2OH)2]: a novel compound containing closed-shell 3d10, 4d10 and 5d10 metal ions

[Ag(UO(2))(3) (OAc)(9)][Zn(H(2)O)(4)(CH(3)CH(2)OH)(2)] (, OAc = CH(3)COO(-)) crystallized from an ethanol solution and its structure was determined by IR spectroscopy, elemental analysis, (1)H NMR, (13)C NMR and X-ray crystallography; it is composed of [Zn(H(2)O)(4)(CH(3)CH(2)OH)(2)](2+) cations and [Ag(UO(2))(3)(OAc)(9)](2-) anions in which triuranyl [(UO(2))(OAc)(3)](3) clusters are linked by the Ag ion.     

Synthesis and structure of the pentacopper(II) substituted tungstosilicate [Cu5(OH)4(H2O)2(A-alpha-SiW9O33)2]10-

The dimeric, pentacopper(II) substituted tungstosilicate [Cu(5)(OH)(4)(H(2)O)(2)(A-alpha-SiW(9)O(33))(2)](10-) (1) has been synthesized in good yield using a one-pot procedure by reaction of Cu(2+) ions with the trilacunary precursor salt K(10)[A-alpha-SiW(9)O(34)]. The title polyanion represents the first polyoxotungstate substituted by 5 copper centers and the central copper-hydroxo-aqua fragment is completely unprecedented. In the course of the reaction, two [A-alpha-SiW(9)O(34)](10-) Keggin half-units have fused in an asymmetrical fashion resulting in the lacunary polyoxotungstate [Si(2)W(18)O(66)](16-). The vacancy in this species is stabilized by a magnetic cluster of five octahedrally coordinated Cu(2+) ions resulting in polyanion 1 with C(2v) symmetry.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

X-ray absorption spectroscopic studies of chromium nitroso complexes. Crystal and molecular structure of (Ph4P)3[Cr(NO)(NCS)5].2.4(CH3)2CO

X-ray absorption spectroscopy (XAS) provides a direct means of solving the controversy on Cr oxidation states in nitroso complexes. The first XAS studies of four known Cr-NO complexes, [Cr(NO)(OH(2))(5)](2+), [Cr(NO)(acac)(2)(OH(2))], [Cr(NO)(CN)(5)](3)(-), and [Cr(NO)(NCS)(5)](3)(-), have been performed, in comparison with the related Cr(III) complexes, [Cr(OH(2))(6)](3+), [Cr(acac)(3)], [Cr(CN)(6)](3)(-), and [Cr(NCS)(6)](3)(-). The X-ray absorption near-edge structure (XANES) spectra of the Cr-NO complexes are distinguished from those of the corresponding Cr(III) complexes by increased intensities of pre-edge absorbancies due to the 1s --> 3d transition, as well as with slight shifts (by 0.2-1.0 eV) of the edge positions to lower energies, with no major changes in the edge shape. These features, together with the available structural data on Cr-NO complexes, show that the effective Cr oxidation states in such complexes are close to Cr(III), due to the pi-back-bonding within the Cr-NO moiety. Multiple-scattering fitting of X-ray absorption fine structure (XAFS) spectra of [Cr(NO)(acac)(2)(OH(2))] supported the assignment of this complex as a trans-isomer (Keller, A.; Jezovska-Trzebiatowska, B. Polyhedron 1985, 4, 1847-1852). The first crystal structure of a Cr nitroso-isothiocyanato complex, (Ph(4)P)(3)[Cr(NO)(NCS)(5)].2.4(CH(3))(2)CO, has been determined.     

Reaction of (mu-oxo)diiron(III) core with CO2 in N-methylimidazole: formation of mono(mu-carboxylato)(mu-oxo)diiron(III) complexes with N-methylimidazole as ligands

Several iron(III) complexes with N-methylimidazole (N-MeIm) as the ligand have been synthesized by using N-MeIm as the solvent. Under anaerobic conditions, [Fe(N-MeIm)(6)](ClO(4))(3) (1) reacts with stoichiometric amounts of water in N-MeIm to afford the (mu-oxo)diiron(III) complex, [Fe(2)(mu-O)(N-MeIm)(10)](ClO(4))(4) (3). Exposure of a solution of 3 in N-MeIm to stoichiometric and excess CO(2) gives rise to the (mu-oxo)(mu-carboxylato)diiron(III) species [Fe(2)(mu-O)(mu-HCO(2))(N-MeIm)(8)](ClO(4))(3) (4) and the methyl carbonate complex [Fe(2)(mu-O)(mu-CH(3)OCO(2))(N-MeIm)(8)](ClO(4))(3) (5), respectively. Formation of the formato-bridged complex 4 upon fixation of CO(2) by 3 in N-MeIm is unprecedentated. Methyl transfer from N-MeIm to a bicarbonato-bridged (mu-oxo)diiron(III) intermediate appears to give rise to 5. Complex 3 is a good starting material for the synthesis of (mu-oxo)mono(mu-carboxylato)diiron(III) species [Fe(2)(mu-O)(mu-RCO(2))(N-MeIm)(8)](ClO(4))(3) (where R = H (4), CH(3) (6), or C(6)H(5) (7)); addition of the respective carboxylate ligand in stoichiometric amount to a solution of 3 in N-MeIm affords these complexes in high yields. Attempts to add a third bridge to complexes 4, 6, and 7 to form the (mu-oxo)bis(mu-carboxylato)diiron(III) species result in the isolation of the previously known triiron(III) mu-eta(3)-oxo clusters [[Fe(mu-RCO(2))(2)(N-MeIm)](3)O](ClO(4)) (8). The structures of 3, 4, 6, and 7 allow one, for the first time, to inspect the various features of the [Fe(2)(mu-O)(mu-RCO(2))](3+) moiety with no strain from the ligand framework.