Electrodeposition and magnetic properties of Ni nanowire arrays on anodic aluminum oxide/Ti/Si substrate

Ni nanowire arrays with different diameters have now been extended to directly fabricate in porous anodic alumina oxide (AAO) templates on Ti/Si substrate by direct current (DC) electrodeposition. An aluminum film is firstly sputter-deposited on a silicon substrate coated with a 300 nm Ti film. AAO/Ti/Si substrate is synthesized by a two-step electrochemical anodization of the aluminum film on the Ti/Si substrate and then used as template to grow Ni nanowire arrays with different diameters. The coercivity and the squareness in parallel direction of Ni nanowires with about 10 nm diameters are 664 Oe and 0.90, respectively. The Ni nanowire arrays fabricated on AAO/Ti/Si substrates should lead to practical applications in ultrahigh-density magnetic storage devices because of the excellent properties.     

Fabrication and magnetic properties of ordered 20 nm Co-Pb nanowire arrays

Ordered Co-Pb nanowire arrays embedded in anodic alumina template were successfully fabricated by electrodeposition. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) observations revealed that the Co-Pb nanowires were polycrystalline with uniform diameters around 20 nm and lengths up to several micrometers. Magnetic measurements showed that the coercivity and remanence of the as-deposited Co-Pb nanowires decreased with the increase of the Pb content. After annealing the Co-Pb nanowires present higher coercivities (2.4-2.5 kOe) than that of pure Co nanowires (2.1 kOe) and the dependence of coercivity and remanence on the Pb content is inconspicuous. A phase separation of Co and Pb occurred after annealing. The familiar pinning model was employed to explain the above experimental results.     

Fabrication and magnetic properties of Fe-Pd nanowire arrays

Ordered 20 nm Fe-Pd nanowire arrays with different compositions have been fabricated by alternating current electrodeposition into nanoporous anodic alumina. The structural and magnetic properties of the arrays were investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). When Fe content is lower than 46 at.%, Fe-Pd alloy phase with fcc structure forms for the as-deposited. After annealing the alloy structure remains unchanged, but the coercivity (H_C) and squareness (M_r/M_s) increase. When Fe content is up to 60 at.%, α-Fe and Fe-Pd phases with fcc structure coexist for the as-deposited. After annealing the nanowires consist of a uniform Fe-Pd phase with fcc structure and the coercivity and squareness decrease. The change of the structure and magnetic properties with the alloy composition and annealing are explained reasonably.     

Fabrication and magnetic properties of ordered Fe60Pb40 nanowire arrays electrodeposited in AAO templates

Ordered ferromagnetic-nonmagnetic heterogeneous Fe₆₀Pb₄₀ nanowire arrays were successfully fabricated by alternating current (AC) electrodeposition into nanoporous alumina templates. Transmission electron microscopy (TEM) image and selected-area diffraction (SAED) pattern analysis showed that the Fe₆₀Pb₄₀ nanowires are polycrystalline with an average diameter of 22 nm and lengths up to several micrometers. X-ray diffraction (XRD) observations indicated that α-Fe and fcc Pb phase coexist and do not form metastable alloy phase. The as-deposited samples were annealed at 200, 300, 400 and 500 ^°C, respectively. Magnetic measurements showed that nanowires have high magnetic anisotropy with their easy axis parallel to the nanowire arrays, and the coercivity of the samples increased with the annealing temperature up to 400 ^°C and reached a maximum (2650 Oe). The change of magnetic properties associated with the microstructure was discussed.     

Structural and magnetic properties of SmCo5.6Ti0.4 alloy

Three series of SmCo_5.6Ti_0.4 samples were prepared by quenching, melt spinning, and ball milling, respectively. Annealing at different temperatures was carried out for the three series. The influence of the processing routes on the structural and magnetic properties was systematically investigated for this alloy. The as-quenched bulk sample consisted of three phases with a rather coarse grain microstructure. Low intrinsic coercivity (_iH_c) of 0.12 T was obtained in this sample. While the as-spun ribbons and as-milled/annealed powders showed the CaCu₅-type phase (1:5) plus Th₂Zn₁₇-type phase (2:17), and the 1:5 phase plus TbCu₇-type phase (1:7), respectively, with nanograin microstructure. The _iH_c of as-spun ribbons and as-milled/annealed (700 °C for 2 h) powders was found to be 0.59 and 2.23 T, respectively. Coercivity mechanism of these as-spun ribbons is mainly of nucleation type. In the as-milled/annealed powders, the network of the nanograin boundaries is believed to provide strong pinning sites for the domain wall movement.     

Synthesis and magnetic properties of spinel CoFe2O4 nanowire arrays

Spinel CoFe₂O₄ nanowire arrays were synthesized in nanopores of anodic aluminum oxide (AAO) template using aqueous solution of cobalt and iron nitrates as precursor. The precursor was filled into the nanopores by vacuum impregnation. After heat treatment, it transformed to spinel CoFe₂O₄ nanowires. The structure, morphology and magnetic properties of the sample were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The results indicate that the nanowire arrays are compact. And the individual nanowires have a high aspect ratio, which are about 80 nm in diameter and 10 μm in length. The nanowires are polycrystalline spinel phase. Magnetic measurements indicate that the nanowire arrays are nearly magnetic isotropic. The reason is briefly discussed. Moreover, the temperature dependence of the coercive force of the nanowire arrays was studied.     

Structure and magnetic properties of SmCoxTi0.4-1:7 ribbons

SmCo_xTi_0.4 (x=6.6, 7.1, 7.6, 8.1) ribbons have been prepared by melt spinning at a wheel speed of 42 m/s, followed by annealing at 750 °C for 2 h. Both as-spun and as-annealed ribbons possess the disordered TbCu7-type (1:7) phase even when the Sm/(Co,Ti) atomic ratio deviates from 1/7. The c/a ratio increases with increasing Co concentration x, but the unit cell volume decreases. The Curie temperatures show above 700 °C, increasing from 707 °C for x=6.6 to 782 °C for x=8.1. The saturation magnetizations increase almost linearly with increasing Co content. The observed magnetic hardening is believed to arise from the high magnetocrystalline anisotropy of the 1:7 phase and the fine nanograin structure. The intrinsic coercivity of 9797 Oe has been obtained in the melt-spun SmCo_7.1Ti_0.4 ribbons.     

Structure and magnetic properties of CoxPb1−x nanowire arrays

Ordered Co_xPb_1−x nanowire arrays embedded in the porous anodic aluminum oxide (AAO) template have been fabricated by electrodeposition. XRD experiments prove that neither hexagonal-close-packed (hcp) nor face-centered-cubic (fcc) Co peaks are detected when the Co component (x) is below 0.91. The coercivity (H_c) and squareness (M_r/M_s) are found to increase with ferromagnetic Co component and the maximum value is at the position x=1 (pure Co nanowires). Annealing effects cause H_c and M_r/M_s increase, which surpasses the pure Co nanowires in the 0.2<x<0.6 at the annealing temperature of 700 °C. Microstructure change during annealing process is proposed to explain the magnetic properties change of samples.     

Structural and magnetic properties of SmCo7−xMox alloys

Phase structure and magnetic properties of the as-cast and as-milled/annealed SmCo_7−xMo_x (x=0, 0.1, 0.2, 0.3, 0.4) alloys have been systematically studied. It is found that all the as-cast series alloys are composed of the CaCu₅-type and Th₂Zn₁₇-type phases. Saturation magnetization of the samples decreases with the Mo content increasing. Intrinsic coercivities (_iH_c) of no more than 0.06 T are observed in these as-cast samples, due to their rather coarse grain microstructures with an average grain size of 50 μm. The as-milled/annealed SmCo_7−xMo_x powders crystallize in the disordered TbCu₇-type (1:7) structure with very fine nanograins, and a minor Co₃Mo phase appears in the samples with x=0.1-0.4. High _iH_c (?0.95 T) are achieved in these samples, with a maximum of 1.26 T located at x=0.2, which can be primarily attributed to strong pinning of the domain wall motion at the nanograin boundaries. The temperature coefficient (β) of the _iH_c is about −0.22%/°C in the temperature range of 25-400 °C for the as-milled/annealed samples.     

Thermally activated magnetization reversal process of self-assembled Fe55Co45 nanowire arrays

We have investigated the temperature dependence of the magnetic properties and the magnetic relaxation of the Fe₅₅Co₄₅ nanowire arrays electrodeposited into self-assembled porous alumina templates with the diameter about 10 nm. X-ray diffraction (XRD) pattern indicates that the nanowire arrays are BCC structure with [1 1 0] orientation along the nanowire axes. Owing to the strong shape anisotropy, the nanowire arrays exhibit uniaxial magnetic anisotropy with the easy magnetization direction along the nanowire axes. The coercivity at 5 K can be explained by the sphere chains of the symmetric fanning mechanism. The temperature dependence of coercivity can be interpreted by thermally activated reversal mechanism as being the localized nucleation reversal mechanism with the activation volume much smaller than the wire volume. Strong field and temperature-dependent magnetic viscosity effects were also observed.     

Study of magnetization process in ordered Fe nanowire arrays

Fe polycrystalline nanowires were electrodeposited in nanoporous anodized alumina membranes. Their magnetic properties were studied at 10 K. The behavior of the isothermal remanence _Mr$M_{\mathrm{r}}$ and the demagnetization remanence _Md$M_{\mathrm{d}}$ was determined. The corresponding ΔM$\mathrm{\Delta }M$ plot revealed the character demagnetizing of the dominant interactions. A simple analysis suggests that curling is the reversal magnetization mode in these samples. The forms of the _Mrev(_Mirr)Hi$M_{\mathrm{rev}}(M_{\mathrm{irr}}{)}_{H_{\mathrm{i}}}$ curves were different from those encountered until now, and it seems that these forms are associated with the curling reversal mode.     

Influence of partial rare-earth substitution for Sm in the giant intrinsic magnetic hardness compound SmCo2Ni3

The phenomenon of giant intrinsic magnetic hardness is investigated in compounds R_1−x Sm _x Co₂Ni₃ with R=Y, Pr, Gd, Tb, Er. Partial Er substitution for Sm actually increases magnetic hardness while all other substitutions decrease magnetic hardness. The strength of coercivity is thus dependent on both the sign and magnitude of the crystal field interaction. The temperature dependence of coercivity is complex in the case of Pr substitution as a result of competing effects from thermal activation and a decrease in anisotropy at low temperatures. This study has been supported by a grant from the National Science Foundation.     

Depth dependence of Néel wall pinning on amorphous CoxSi1−x films with diluted arrays of elliptical antidots

Diluted arrays of elliptical antidots have been fabricated by optical lithography, electron beam lithography and plasma etching on amorphous Co₇₄Si₂₆ magnetic films with a well-defined uniaxial anisotropy. The magnetic behavior of two identical antidot arrays but with different hole depth in comparison with film thickness has been studied by transverse magneto-optical Kerr effect. Significant differences appear in the coercivity depending on whether the magnetic film is completely perforated or not, indicating a much more effective domain wall pinning process when the depth of the holes is smaller than the magnetic film thickness.     

Fabrication and magnetic properties of Fe3O4 nanowire arrays in different diameters

Fe₃O₄ nanowire arrays with different diameters of D=50, 100, 150 and 200 nm were prepared in anodic aluminum oxide (AAO) templates by an electrodeposition method followed by heat-treating processes. A vibrating sample magnetometer (VSM) and a Quantum Design SQUID MPMS magnetometer were used to investigate the magnetic properties. At room temperature the nanowire arrays change from superparamagnetism to ferromagnetism as the diameter increases from 50 to 200 nm. The zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements show that the blocking temperature T_B increases with the diameter of nanowire. The ZFC curves of D=50 nm nanowire arrays under different applied fields (H) were measured and a power relationship between T_B and H were found. The temperature dependence of coercivity below T_B was also investigated. Mössbauer spectra and micromagnetic simulation were used to study the micro-magnetic structure of nanowire arrays and the static distribution of magnetic moments of D=200 nm nanowire arrays was investigated. The unique magnetic behaviors were interpreted by the competition of the demagnetization energy of quasi-one-dimensional nanostructures and the magnetocrystalline anisotropy energy of particles in nanowires.     

Angular distribution of magnetic particles in particulate tapes

The distribution functions of magnetic recording particulate tapes were studied by the measurements of magnetoremanence. For fitting distribution function, cosines series function such as Legendre polynomial has been popularly used, however, Gaussian function is found to be preferable for sharp or wide distributions. Audio metal tape has the sharpest distribution function among the seven tapes.     

EPR and magnetic properties of MgO-CaO-SiO2-P2O5-CaF2-Fe2O3 glass-ceramics

Glass-ceramics have been derived from 4.5MgO(45−x)CaO34SiO₂16P₂O₅0.5CaF₂xFe₂O₃ (x=5, 10, 15, 20 wt%) glasses by heat treatment. Room temperature electron paramagnetic resonance (EPR) spectra and temperature-dependent magnetic susceptibility (χ) of the glass-ceramics have been obtained. The EPR absorption line centered at g≈4.3 disappeared at higher concentrations of iron oxide. The intensity and line width of the EPR absorption line centered at g≈2.1 increased as the iron oxide concentration was increased. Temperature-dependent magnetization of samples with low iron oxide content revealed ferrimagnetic as well as paramagnetic contributions. Information about the structural changes involving iron ions, their valence state and the type of magnetic interactions between the Fe ions as a function of composition was obtained using EPR and χ studies.     

Magnetic coupling in Co1−xPtx (x>0.5) nanowires electrodeposited on an AAO template

Thirty nanometer diameter Co-Pt nanowires of different composition were fabricated by electrodepositing the Co and Pt atoms to nanoporous anodized aluminium oxide (AAO) templates. The structure and magnetic properties are studied by transmission electron microscopy (TEM), induction-coupled plasma spectrometer (ICP), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The as deposited nanowires with Pt content about 50 at.% present a single ferromagnetic phase of fcc CoPt. When the Pt content of the nanowires varies from about 55 to about 75 at.%, the nanowires include a soft phase of fcc CoPt₃ and a relatively hard phase of fcc CoPt and the two phases are separate as seen from the hysteresis loops. After annealing to 600 °C, the two phases coupled completely and the coupled phase has the same coercivity as the original hard one.     

Asymmetric Magnetization Reversal Probed by Recoil Loop Measurements inan Exchange Biased La0.67Sr0.33MnO3/La0.33Ca0.67MnO3 Bilayer Film

We exploit the recoil loop measurements to study La0.07 Sr0.33 Mn O3/La0.33 Ca0.67 Mn O3 bilayer film. the asymmetric magnetization reversal in an exchange-biased It is found that the recoil curve encloses a marked area only in the second quadrant of the hysteresis loop, and the recoil susceptibility in the descending branch of the major loop is evidently higher than that in the ascending branch. The study indicates that the exchange anisotropy of a unidirectional nature and an orientation deviated from the easy axis of the ferromagnetic layer plays a crucial role in creating the reversal asymmetry.     

Magnetic anisotropy-induced spin-reorientation in spinel FeCr2S4

In this paper, the low-field magnetic behavior of polycrystalline FeCr₂S₄ was investigated by thermal circling the sample from 5 to 200 K at a constant magnetic field. We show that, upon cooling the sample at 50 Oe to a temperature below the Curie temperature then warming back, the magnetization displays irreversibility between cooling and warming sequence. The irreversible behavior was suppressed gradually with increasing magnetic field. By considering spin-reorientation due to the increase of magnetic anisotropy upon cooling, the irreversible behavior has been explained qualitatively.