Adsorption of nitrogen-containing aromatic molecules on Si(1 1 1)-7 × 7

The adsorption configurations of pyrimidine and triazine on Si(1 1 1)-7 × 7 were investigated using high-resolution electron energy loss spectroscopy (HREELS) X-ray photoelectron spectroscopy and density functional theory calculations. The HREELS spectra of chemisorbed monolayer show the coexistence of the C(sp²)-H and C (sp³)-H stretching modes together with the observation of the unconjugated CN(C) vibrational feature suggesting that the carbon atom and its para-nitrogen atom of pyrimidine and triazine directly participate in binding with the surface to form Si-C and Si-N σ-linkages. The core levels of the C-atom and its opposite nitrogen atom directly binding with Si-atoms experience a down-shifting by 1.8-1.9 and 1.4-1.6 eV, respectively. These experimental findings are consistent with the density functional theory calculations indicating that the carbon atom and its para-nitrogen atom favorably link with the adjacent adatom and rest atom pair to form C-Si and N-Si linkages.     

Electronic properties of (3/2 × 3/2)-Na/Cu(1 1 1)

High-resolution electron energy loss spectroscopy was used to study the electronic properties of (3/2 × 3/2)-Na/Cu(1 1 1) at room temperature. Loss spectra showed two-well distinct losses at 114 and 180 meV assigned to not dispersive charge density waves. Mechanisms to explain their existence are proposed. Moreover, the expected 2D plasmon of the Na quantum well state was not observed. The strong influence of the underlying Cu substrate may be responsible for the absence of such mode.     

Surface phonons of clean, hydrogen- and deuterium-terminated Si(0 0 1) surfaces

We present a comprehensive vibrational study of the clean and hydrogen- or deuterium-terminated silicon (0 0 1) surface. The modes related to the clean as well as to the H:Si, D:Si, and 2H:Si, 2D:Si surfaces are studied by means of high resolution electron energy loss spectroscopy (HREELS). We pay special attention to the modification of the phonon modes by the surface treatments and compare the data with reported experimental and theoretical results. The analysis of the relative phonon intensities of the clean, mono- and dihydride surfaces yields the assignment of the modes related to the dimer bonds. The isotopic shifts of vibrons related to the Si-H and Si-D bonds and to the surface phonon are discussed and applied to the characterisation of the surface excitations.     

RT growth of acetonitrile and acrylonitrile on Si(0 0 1)-2 × 1 studied by XPS and LEED

In this work we show the adsorption of acetonitrile (CH₃CN) and acrylonitrile (CH₂CHCN) on Si(0 0 1)-2 × 1 at room temperature by increasing the molecular doses. Especially, by means of XPS and LEED data, we stress the action of these molecules on the silicon surface locating the dangling-bonds quasi-saturation within 10 L. The shortage of nitrogen XPS signal and some anomalies in carbon spectra point to an invading action from a traditional X-ray source (Al-K_α line) against chemisorbed molecules. In particular, we think that a long exposure to this radiation could break carbon-silicon bonds changing some adsorption geometries and making desorb molecular fragments.     

Ultra-thin Si overlayers on the TiO2 (1 1 0)-(1 × 2) surface: Growth mode and electronic properties

The growth of thin subnanometric silicon films on TiO₂ (1 1 0)-(1 × 2) reconstructed surfaces at room temperature (RT) has been studied in situ by X-ray and ultra-violet photoelectron spectroscopies (XPS and UPS), Auger electron and electron-energy-loss spectroscopies (AES and ELS), quantitative low energy electron diffraction (LEED-IV), and scanning tunneling microscopy (STM). For Si coverage up to one monolayer, a heterogeneous layer is formed. Its composition consists of a mixture of different suboxides SiO_x (1 < x ? 2) on top of a further reduced TiO₂ surface. Upon Si coverage, the characteristic (1 × 2) LEED pattern from the substrate is completely attenuated, indicating absence of long-range order. Annealing the SiO_x overlayer results in the formation of suboxides with different stoichiometry. The LEED pattern recovers the characteristic TiO₂ (1 1 0)-(1 × 2) diagram. LEED I-V curves from both, substrate and overlayer, indicate the formation of nanometric sized SiO_x clusters.     

Interaction of H2O with the RuO2(1 1 0) surface studied by HREELS and TDS

The adsorption of water on a RuO₂(1 1 0) surface was studied by using high-resolution electron energy loss spectroscopy (HREELS) and thermal desorption spectroscopy (TDS). The first thermal desorption peak observed between 350 and 425 K is attributed to molecular water adsorbed on fivefold coordinated Ru_cus sites. Higher coverages of water give rise to TDS peaks between 190 and 160 K, which we attribute to water in the second layer bound to bridge oxygen, and multilayers, respectively. HREELS shows that H₂O chemisorbs on Ru_cus sites through oxygen inducing a slight red shift of the vibrational frequency of O_bridge atoms. Molecular adsorption is also confirmed by the presence of both the scissor and the libration modes showing the expected isotopic shift for D₂O. The water adsorbed on the Ru_cus sites also forms hydrogen bonds with the bridge oxygen indicated by the broad intensity at the lower frequency side of the O-H stretch mode. HREELS and TDS results suggest that on the perfect RuO₂(1 1 0) surface water dissociation is almost negligible.     

Site selective atomic chlorine adsorption on the Si(1 1 1)7 × 7 surface

The spontaneous dissociation of trichloroethylene molecules on the Si(1 1 1)7 × 7 surface was investigated using STM. Chlorine atoms were identified by using voltage dependent imaging and by observing voltage dependent tip-induced diffusion. At low coverage, we identify one chlorine that dissociates and binds to an adatom, leaving a nearby chlorovinyl group as the other product bound to the surface. Chlorine atoms show strong site selectivity for corner adatoms and some preference for the faulted half of the unit cell. This result differs significantly from previous studies of chlorine on this surface and a site-selective mobile precursor model is used to explain this discrepancy. The observed site-selectivity is consistent with the high electronegativity value for chlorine.     

Electronic properties of self-assembled quantum dots of sodium on Cu(1 1 1) and their interaction with water

The electronic properties of thin films of Na on Cu(1 1 1) and their interaction with water have been investigated at room temperature by high resolution electron energy loss spectroscopy. The first Na layer is characterized by two features tentatively assigned to charge density waves. The second Na layer grows as small islands. The loss spectrum of this layer shows a feature at 3.0 eV identified as a Mie resonance. Increasing alkali coverage, Na islands form a continuous film, as indicated by the appearance of a Na surface plasmon and by the disappearance of the Mie resonance. Water vapour strongly interacts with Na layers as shown by the OH-Na vibration whose frequency shifts from 36 meV to 53 meV as a function of alkali coverage.     

Mechanism of GeH4 dissociation on Si(1 1 1)-(7 × 7)

Results of an STM study of dissociative GeH₄ adsorption on Si(1 1 1)-(7 × 7) at 300 K show that GeH₄ adsorbs under scission of two Ge-H bonds according to GeH₄(g) + 4db → GeH₂(ad) + 2H(ad). GeH₂ binds to two adatom dangling bonds in a bridged configuration, while the two released hydrogen atoms saturate two additional dangling bonds. The GeH₄ sticking coefficient under these conditions is 1.2 × 10⁻⁶, one order of magnitude smaller than for SiH₄.     

Growth and characterization of thin PTCDA films on 3C-SiC(0 0 1)c(2 × 2)

The growth of thin 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA) films on a 3C-SiC(0 0 1)c(2 × 2) substrate has been studied by means of photoelectron spectroscopy (PES) and atomic force microscopy (AFM). In the first monolayer the molecules interact with the substrate mainly through the O atoms in the end groups of the molecule. The O atoms have a higher binding energy in the first molecular layer compared to the following layers. No chemical shifts are observed in the Si 2p spectra or in the C 1s spectra from the perylene core of the molecules. From the VB spectra and LEED pattern we conclude that the substrate remains in the c(2 × 2) reconstruction after PTCDA deposition. For thicker films a Stranski-Krastanov film growth was observed with flat lying molecules relative to the substrate.     

Core level photoemission and STM characterization of Ta/Si(1 1 1)-7 × 7 interfaces

We present the results of scanning tunneling microscopy (STM) and photoemission spectroscopy (PES) of the Ta/Si(1 1 1)-7 × 7 system after deposition of Ta at substrate temperatures from 300 to 1250 K. The coverage of Ta varied from 0.05 up to 2.5 of a monolayer (ML). STM shows that at 300 K and coverage less than 1 ML, a disordered chemisorbed phase is formed. Deposition on a hot surface (above 500 K) produces round 3D clusters randomly distributed on the surface. Cluster height and their diameter are found to change drastically with annealing temperature and the Ta coverage. Analysis of photoemission data of the Si 2p core levels shows that at room temperature and at coverage ?1 ML core level binding energy shifts and intensity variations of Si surface related components are observed, which clearly indicate that the reaction starts already at 300 K. Shifts in the binding energy, changes of the peak shapes and intensity of the Ta 4f doublet at higher temperatures can be explained by the formation of stable silicide on the surface.     

Covalent binding of cyclohexene, 1,3-cyclohexadiene and 1,4-cyclohexadiene on Si(1 1 1)-7 × 7

The adsorption reactions and binding configurations of cyclohexene, 1,3-cyclohexadiene and 1,4-cyclohexadiene on Si(1 1 1)-7 × 7 were studied using high-resolution electron energy loss spectroscopy (HREELS), ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS) and DFT calculation. The covalent attachments of these unsaturated hydrocarbons to Si(1 1 1)-7 × 7 through the formation of Si–C linkages are clearly demonstrated by the observation of the Si–C stretching mode at 450–500 cm⁻¹ in their HREELS spectra. For chemisorbed cyclohexene, the involvement of π_C=C in binding is further supported by the absence of C=C stretching modes and the disappearance of the π_C=C photoemission. The chemisorption of both 1,3-cyclohexadiene and 1,4-cyclohexadiene leads to the formation of cyclohexene-like intermediates through di-σ bonding. The existence of one π_C=C bond in their chemisorbed states is confirmed by the observation of the C=C and (sp²)C---H stretching modes and the UPS and XPS results. DFT calculations show that [4 + 2]-like cycloaddition is thermodynamically preferred for 1,3-cyclohexadiene on Si(1 1 1)-7 × 7, but a [2 + 2]-like reaction mechanism is proposed for the covalent attachment of cyclohexene and 1,4-cyclohexadiene.     

Dynamics of copper atoms on Si(1 1 1)-7 × 7 surfaces

This study investigated the dynamics of copper atoms adsorbed on Si(1 1 1)-7 × 7 surfaces between 300 K and 623 K using a variable-temperature scanning tunneling microscope (STM). The diffusion behavior of copper clusters containing up to ∼6 atoms into a particular half unit cell of the 7 × 7 reconstructed Si(1 1 1) surface was considered. The movements and the formation of copper clusters were tracked in detail. The activation energies and pre-exponential factors for various diffusion paths were estimated. Finally, the Cu-etching-Si process and the quasi-5 × 5 incommensurated phase of Cu/Si islands were discussed.     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

Surface dynamics of Mo(1 1 0)–H and Mo(1 1 0)–Li

We compare the surface dynamics of the adsorbate systems Mo(1 1 0)–H and Mo(1 1 0)–Li. In both cases electron energy loss spectroscopy measurements revealed strong substrate surface phonon anomalies. Whereas the phonon anomaly of the hydrogen-covered surface was unequivocally assigned to be of the Kohn type, the anomalous behavior of the surface phonons of the lithium-covered surface remained obscure. In this paper we develop an experimental criterion based on the dispersion of adsorbate phonons, which allows to decide whether the observed substrate surface phonon anomaly is of the Kohn type or not. Employing this criterion we now definitely rule out that the anomaly on Mo(1 1 0)–Li is due to the Kohn effect.     

SiO adsorption on a p(2 × 2) reconstructed Si(1 0 0) surface

We have investigated the adsorption mechanism of SiO molecule incident on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. Stable adsorption geometries of SiO on Si surface, as well as their corresponding activation and adsorption energies are identified. We found that the SiO molecule is adsorbed on the Si(1 0 0) surface with almost no activation energy. An adsorption configuration where the SiO binds on the channel separating the dimer rows, forming a Si-O-Si bridge on the surface, is the energetically most favourable geometry found. A substantial red-shift in the calculated vibrational frequencies of the adsorbed SiO molecule in the bridging configurations is observed. Comparison of adsorption energies shows that SiO adsorption on a Si(1 0 0) surface is energetically less favourable than the comparable O₂ adsorption. However, the role of SiO in the growth of silicon sub-oxides during reactive magnetron plasma deposition is expected to be significant due to the relatively large amount of SiO molecules incident on the deposition surface and its considerable sticking probability. The stable adsorption geometries found here exhibit structural properties similar to the Si/SiO₂ interface and may be used for studying SiO_x growth.     

Electronic properties of metallic bilayers deposited on Cu(1 1 1): A comparative study

The nature and the dispersion of the electronic collective excitations in different metal bilayers (Na, Ca, Ag) deposited onto the Cu(1 1 1) surface were investigated by angle-resolved electron energy loss spectroscopy. We found a nearly-flat behavior of the surface plasmon energy (absence of dispersion) in Ca and Ag bilayers, characterized by the presence of d electrons, in good agreement with theoretical predictions within the framework of the s-d polarization model. On the contrary, an initial negative dispersion was observed in the Na bilayer. The intensity of the surface plasmon was vanishing in the long-wavelength limit in all cases.     

CO adsorption on the reduced RuO2(1 1 0) surface

The O-bridge atoms on a stoichiometric RuO₂(1 1 0) surface were removed by reaction with CO. The resulting reduced surface was then further exposed to CO. By means of thermal desorption spectroscopy and high-resolution electron energy-loss spectroscopy three adsorbed CO states were identified on bridge sites and assigned to double-bonded, single-bonded, and single-bonded species in the vicinity of O-bridge residues, respectively.     

Effect of Pb adatom flux rate on adlayer coverage for Stranski-Krastanov growth mode on Si(1 1 1)7 × 7 surface

Lead (Pb) has been a prototypical system to study diffusion and reconstruction of silicon surfaces. However, there is a discrepancy in literature regarding the critical coverage at which island formation takes place in the Stranski-Krastanov (S-K) mode. We address this issue by studying the initial stages of evolution of the Pb/Si(1 1 1)7 × 7 system by careful experiments in ultra-high vacuum with in situ characterization by auger electron spectroscopy, electron energy loss spectroscopy and low-energy electron diffraction. We have adsorbed Pb onto clean Si(1 1 1 )7 × 7 surface with sub-monolayer control at different flux rates of 0.05 ML/min, 0.14 ML/min and 0.22 ML/min, at room temperature. The results clearly show that the coverage of the Pb adlayer before the onset of 3D Pb islands in the S-K mode depends on the flux rates. LEED results show the persistence of the (7 × 7) substrate reconstruction until the onset of the island formation, while EELS results do not show any intermixing at the interface. This suggests that the flux rates influence the kinetics of growth and the passivation of dangling bonds to result in the observed rate-dependent adlayer coverages.