SiO2-PbF2-CdF2 glasses and glass ceramics

Lead-Cadmium fluorosilicate stable glasses were prepared and the vitreous domain region determined in the composition diagram. Characteristic temperatures were obtained from thermal analysis and the structural studies performed illustrate clearly the role played by lead atoms in the glasses crystallization behavior and the glass-forming ability of cadmium atoms. The occurrence of either a cubic lead fluoride or a lead-cadmium fluoride solid solution in crystallizing samples was found to be dependent on Er³⁺ doping. The optically active ions were found to concentrate in the crystalline phase and in fact play the role of nucleating agent as suggested from X-ray diffraction and EXAFS measurements.     

Spectroscopic investigation of Tm:TeO2-WO3 glass

We studied the spectroscopic characteristics of telluride glass with the host composition (0.85)TeO₂-(0.15)WO₃, containing 0.25 and 1.0 mol% thulium oxide (Tm₂O₃). By analyzing the absorption spectra with the Judd-Ofelt theory, the average radiative lifetimes of 305±7.5 μs and 1.95±0.02 ms were determined for the ³F₄ and ³H₄ levels, respectively. Measured fluorescence lifetime of the ³F₄ level decreased from 218 to 51 μs for the 0.25 and 1.0 mol% Tm₂O₃ doped samples, respectively, indicating the effect of boosted non-radiative decay at higher doping concentrations. A similar trend was observed for the ³H₄ level, where the fluorescence lifetime decreased from 1.86 ms to 350 μs at these concentrations. The quenching of the 1460 nm (³F₄→³H₄) emission in favor of the 1800 nm (³H₄→³H₆) emission due to cross relaxation was further evident in the fluorescence spectra of the samples. The calculated stimulated emission cross sections (3.73±0.1×10⁻²¹ cm² at 1460 nm and 6.57±0.07×10⁻²¹ cm² at 1808 nm) reveal the potential importance of the Tm³⁺:(0.85)TeO₂-(0.15)WO₃ glass for applications in fiber-optic amplifiers and fiber lasers.     

X-ray and neutron powder diffraction study of the monoclinic perovskites Sr2MSbO6 (M=In, Y)

The structures of the perovskites Sr₂InSbO₆ and Sr₂YSbO₆ have been investigated by X-ray and neutron powder diffraction. Both compounds are of monoclinic distortion, space group P2₁/n, with the lattice parameters related to that of the ideal cubic-perovskite (a_p) by a_p, c≈2a_p and β≈90°. The distortions that occur in Sr₂InSbO₆ and Sr₂YSbO₆ can be viewed as due to the octahedral tilts around both the two-fold [110]_p- and the four-fold [001]_p-axis of the cubic aristotype with the oxygen's shifted away from the In/Y(III) ions towards the Sb(V) ions, creating an ordered arrangement of the alternating InO₆/YO₆ and SbO₆ octahedra.     

Confined acoustic modes and spectral determination of network connectivity: Raman signatures of nanometric structure in g-GexSe1−x

Low-temperature Raman scattering results are presented on three glass compositions of Ge_xSe_1−x (15, 20, and 27 At. Ge%), and conciled with their reported structural data. The acoustic range is marked by the absence of Boson peak, and features discrete modes corresponding to nanometric dynamic aggregates. First sharp diffraction peak (FSDP) in structure factor S(k), due to Ge-Ge correlations brought about by shared Ge[Se_1/2]₄ tetrahedra medium-range structures, signifies 3D networking of Se-chains. A measure of volume-fraction of these entities determined from the FSDP area, and their number density ρ_MRS∝(k³Area)_FSDP is found to relate directly to the network connectivity, defined from optical Raman spectra in terms of the degree of cross-linking of Se-chains.     

Cooperative emission study in ytterbium-doped Y2SiO5

Ytterbium ions infrared and visible cooperative luminescences, resulting from YAG laser and selective site excitations, in (6%) Yb-doped Y₂SiO₅ thin film are analyzed. Magnetically coupled Yb-Yb ion pairs seem to play a major role in energy transfer and cooperative emission, confirming the prevalence of superexchange mechanisms.     

Effect of SnO2 coating on the magnetic properties of nanocrystalline CuFe2O4

Nanocrystalline CuFe₂O₄ and CuFe₂O₄/xSnO₂ nanocomposites (x=0, 1, 5 wt%) have been successfully synthesized by one-pot reaction of urea-nitrate combustion method. The transmission electron microscope study reveals that the particle size of the as synthesized CuFe₂O₄ and CuFe₂O₄/5 wt%SnO₂ are 10 and 20 nm, respectively. The SnO₂ coating on the nanocrystalline CuFe₂O₄ was confirmed from HRTEM studies. The resultant products were sintered at 1100 °C and characterized by XRD and SQUID for compound formation and magnetic studies, respectively. The X-ray diffraction pattern shows the well-defined sharp peak that confirms the phase pure compound formation of tetragonal CuFe₂O₄. The zero field cooled (ZFC) and field cooled (FC) magnetization was performed using SQUID magnetometer from 2 to 350 K and the magnetic hysteresis measurement was carried out to study the magnetic properties of nanocomposites.     

High pressure X-ray diffraction and electrical resistance study of the quasi-one-dimensional sulfide InV6S8

The ambient structural details and the results of room temperature high pressure angle dispersive X-ray diffraction and electrical resistance measurements on the quasi-one-dimensional sulfide, InV₆S₈, to a pressure of 25 GPa are reported. The material does not undergo a phase transition in this pressure range, though an anomaly in the c/a ratio has been observed around 10 Gpa. A fit of the Murnaghan equation of state to the V/V₀ versus pressure data, with the value of the derivative of B₀ with respect to pressure, B′₀, fixed at 4 has yielded a value of the bulk modulus, B₀, of 110 GPa. We also present data of the pressure dependence of the lattice constants, a and c, the ratio c/a, and the resistance at room temperature.     

Residual surface stress measurements in YBa2Cu3Ox superconductors

XRD and residual surface stress (sin² ψ) measurements were carried out on YBa₂Cu₃O_x superconductors with varying oxygen stoichiometry (6.3 < x < 7.0). Slopes of the surface strain versus sin² ψ were plotted against oxygen content for certain reflections. Compressional surface stress has been found along the c-axis, while a tensile surface stress has been observed along the ab-plane. Both surface stresses were found to vary slightly with oxygen content. These findings qualitatively agree with a very small hydrostatic pressure effect on T_c for fully oxygenated YBa₂Cu₃O_x (x = 7) compared to oxygen deficient material at the surface.     

Boson peak of AsxS1−x glasses and theoretical calculations of low frequencies clusters vibrations

The results of comparison of spectral position of the LF bands of g-As₂S₃ and g-As₂₂S₇₈ with theoretical calculations of vibrational spectra of different clusters (As₂S₄, As₂S₅, As₂S₆, AsS₃-As₃) in the LF region (10-85 cm⁻¹) are given. The torsion type vibrations of the small chain-like clusters are located in the same spectral region as Boson peak of As-S glasses system. They can make several contributions to the LF spectrum. The cluster lengths by weight distribution functions f(L)*L are from 5.5 to 10.1 Å and from 4.5 to 7.5 Å for g-As₂S₃ and g-As₂₂S₇₈, respectively. The lognormal fittings of the f(L)*L functions give the most probably values about the 7.6 Å (for g-As₂S₃) and 6.2 Å (for g-As₂₂S₇₈).     

Spectral analysis of Pr-, Sm- and Dy-doped transparent GeO2-BaO-TiO2 glass ceramics

In this paper, we present the photoluminescence properties of Pr³⁺-, Sm³⁺- and Dy³⁺-doped germanate glasses and glass ceramics. From the X-ray diffraction measurement, the host glass structure was determined. These glasses have shown strong absorption bands in the near-infrared (NIR) region. Compared to Pr³⁺-, Sm³⁺- and Dy³⁺-doped glasses, their respective glass ceramics have shown stronger emissions due to the Ba₂TiGe₂O₈ crystalline phase. For Pr³⁺-doped glass and glass ceramic, emission bands centered at 530 nm (³P₀→³H₅), 614 nm (³P₀→³H₆), 647 nm (³P₀→³F₂) and 686 nm (³P₀→³F₃) have been observed with 485 nm (³H₄→³P₀) excitation wavelength. Of them, 647 nm (³P₀→³F₂) has shown bright red emission. Emission bands of ⁴G_5/2→⁶H_5/2 (565 nm), ⁴G_5/2→⁶H_7/2 (602 nm) and ⁴G_5/2→⁶H_9/2 (648 nm) for the Sm³⁺:glass and glass ceramic, with excitation at ⁶H_5/2→⁴F_7/2 (405 nm) have been recorded. Of them, ⁴G_5/2→⁶H_7/2 (602 nm) has shown a bright orange emission. With regard to the Dy³⁺:glass and glass ceramic, a bright fluorescent yellow emission at 577 nm (⁴F_9/2→⁶H_13/2) has been observed, apart from ⁴F_9/2→⁶H_11/2 (667 nm) emission transition with an excitation at 454 nm (⁶H_15/2→⁴I_15/2) wavelength. The stimulated emission cross-sections of all the emission bands of Pr³⁺, Sm³⁺ and Dy³⁺:glasses and glass ceramics have been computed based on their measured full-width at half-maxima (FWHM, Δλ) and lifetimes (τ_m).     

Crystallization kinetics in new Sb14As29Se52Te5 amorphous glass

Differential scanning calorimetry (DSC) under non-isothermal conditions is used to study the crystallization kinetics of Sb₁₄As₂₉Se₅₂Te₅ chalcogenide glass. In addition, two approaches are used to analyze the dependence of glass transition temperature (T_g) on the heating rate (α). One is empirical linear relationship between (T_g) and ln(α). The second approach is the use of straight line vs. 1/T_g for the evaluation of the activation energy for glass transition. The phases at which the alloy crystallizes after the thermal treatment have been identified by using X-ray diffraction. The diffractogram of the transformed material shows the presence of some crystallites of As, Te, AsSb, As₂Se₃, Sb₂Se₃ and AsSe_.5Te_.5 in the residual amorphous matrix.     

Writing of two-dimensional crystal curved lines at the surface of Sm2O3-Bi2O3-B2O3 glass by samarium atom heat processing

Two-dimensional crystal curved lines consisting of the nonlinear optical Sm_xBi_1−xBO₃ phase are fabricated at the surface of 8Sm₂O₃·37Bi₂O₃·55B₂O₃ glass by continuous wave Nd:YAG laser (wavelength: 1064 nm) irradiation (samarium atom heat processing) with a power of ∼0.9 W and a laser scanning speed of 5 μm/s. The curved lines with bending angles of 0-90° or with sine-shapes are written by just changing the laser scanning direction. The polarized micro-Raman scattering spectra for the line after bending are the same as those for the line before bending, indicating that the crystal plane of Sm_xBi_1−xBO₃ crystals to the crystal growth direction might be maintained even after the change in the laser scanning direction. It is found from laser scanning microscope observations that the crystal lines at the surface are swelled out smoothly, giving a height of about 10 μm.     

Synthesis and structure of the monolayer hydrate K0.3CoO2·0.4H2O

The monolayer hydrate (MLH) K_0.3CoO₂·0.4H₂O was synthesized from K_0.6CoO₂ by extracting K⁺ cations using K₂S₂O₈ as an oxidant and the subsequent intercalation of water between the layers of edge-sharing CoO₆ octahedra. A hexagonal structure (space group P6₃/mmc) with lattice parameters a=2.8262(1) Å, c=13.8269(6) Å similar to the MLH Na_0.36CoO₂·0.7H₂O was established using high-resolution synchrotron X-ray powder diffraction data. The K/H₂O layer in the K-MLH is disordered, which is in contrast to the Na-MLH. At low temperatures metallic and paramagnetic behavior was found.     

Charge and lattice dynamics of ordered state in La1/2Ca1/2MnO3: infrared reflection spectroscopy study

We report an infrared reflection spectroscopy study of La_1/2Ca_1/2MnO₃ over a broad frequency range and temperature interval which covers the transitions from the high temperature paramagnetic to ferromagnetic and, upon further cooling, to antiferromagnetic phase. The structural phase transition, accompanied by a ferromagnetic ordering at T_C=234 K, leads to enrichment of the phonon spectrum. A charge ordered antiferromagnetic insulating ground state develops below the Néel transition temperature T_N=163 K. This is evidenced by the formation of charge density waves and opening of a gap with the magnitude of 2Δ₀=(320±15) cm⁻¹ in the excitation spectrum. Several of the infrared active phonons are found to exhibit anomalous frequency softening. The experimental data suggest coexistence of ferromagnetic and antiferromangetic phases at low temperatures.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Synthesis of PEO/4Hb-TaS2 layered nanocomposite

Single-phase layered nanocomposite containing 4Hb-TaS₂ and poly(ethylene oxide) [PEO] has been first synthesized by using the exfoliation-adsorption technique. It has been characterized by powder X-ray diffraction (XRD) and electrical dc resistivity measurements. As the product exhibited lattice expansions along the stacking direction, PEO was intercalated into 4Hb-TaS₂ galleries.     

Ab initio calculations and experimental determination of the structure of Cr2AlC

We have calculated the equilibrium volume and the density of states (DOS) of Cr₂AlC for antiferromagnetic (AFM), ferromagnetic (FM) and paramagnetic (PM) configurations by ab initio total energy calculations. Based on a comparison of the cohesive energies as well as the DOS for all three magnetic configurations we have identified the FM configuration to be metastable. Furthermore, we report the structural characterization of polycrystalline Cr₂AlC thin films grown by magnetron sputtering. Our calculated interplanar distances and equilibrium volume for the PM and AFM configurations are in good agreement with our experiment. The charge density distribution suggests that the chemical bonding between Cr and C in Cr₂AlC is very similar to the one in cubic CrC.     

Negative thermal expansion and phase transition behaviour in Ag2O

The structure of Ag₂O has been studied between 5 and 300 K using both high resolution synchrotron X-ray and neutron powder diffraction methods. Ag₂O exhibits strong negative thermal expansion below 200 K and the cell volume is only weakly temperature dependent between 200 and 300 K. There is evidence for a first order phase transition below 35 K in Ag₂O and this is apparently related to displacive disorder of the Ag cations. This disorder contributes to the observed NTE.     

Reverse Monte Carlo simulations and Raman scattering of an amorphous GeSe4 alloy produced by mechanical alloying

The short and intermediate range order of an amorphous GeSe₄ alloy produced by Mechanical Alloying were studied by Reverse Monte Carlo simulations of its X-ray total structure factor and Raman scattering. The simulations were used to compute the , and partial distribution functions and the , and partial structure factors. We calculated the coordination numbers and interatomic distances for the first and second neighbors. The data obtained indicate that the structure of the alloy has important differences when compared to alloys prepared by other techniques. There are a high number of Se-Se pairs in the first shell, and some of the tetrahedral units formed seemed to be connected by Se-Se bridges.