用子域边界元法研究各向异性材料中的界面裂纹

用子域边界元法研究各向异性材料中的界面裂纹，在边界元公式中，采用了带特征根的基本解，以增量形式的边界积分方程为基础，通过二次等参元及国分之一面力奇异远离散化处理，可以得到各子域的代数方程组，依据凝集技术，可得到仅含有子域公共边界及裂纹边界未知量的求解方程组，通过迭代法，可以寻求到每种载荷作用下的裂纹所处的真实状态，然后，由文献「２」中的方法求解界面裂纹的应力强度因子。结果表明，子域边界方法是正确的     

复杂载荷三维裂纹分析双重边界元法

提出可用于高温、高转速状态下的热动力机械三维含裂构件热弹性分析方法——双重边界元法.首先建立了考虑温度及离心载荷的双重边界积分方程组,并对边界积分方程组的选取及适用范围进行了讨论。然后提出角非快调元模型离散技术。接着提出超奇异积分方程分析去除奇异性方法及数值积分技术.数值算例表明计算结果与有关权函数解十分吻合,说明了用双重边界元法计算复杂载荷条件下三维应力强度因子的有效性.还讨论了有关热应力强度因子权函数解的适用范围.     

虚边界元法的应用及其求解方法

由弹性力学问题的虚边界元方法出发，给出若干算例，对基在接触，塑性，蠕变等非线性问题中的应用，做了进一步探讨，提出了相应的求解方案。     

基于边界元法求解三维弹性摩擦接触问题

边界元法求解三维摩擦接触问题,其中一个关键点在于如何确定滑移方向。即当出现相对滑移时,滑移方向如何确定。当前常采用的方法是,粘结点利用切向面力得到滑移方向,滑移点利用切向相对位移得到滑移方向。不过该方法难以保证收敛性。针对这一问题,本文采用滑移方向预测技术得到滑移方向。即以后出现相对滑移时,滑移方向采用预测技术中得到的滑移方向。由于摩擦接触问题和历史加载相关,本文采用增量法求解。不同摩擦系数下的数值结果都证明了本文算法的有效性和收敛性及滑移方向预测技术的有效性。     

求解位势问题的虚边界元法

本文提出了求解位势问题的虚边界元法，建立了位势问题的虚边界元的离散方程式，推导了离散化求系数的积分解析式。该方法与传统边界元法相比具有不存在奇异积分和边界附近精度较高等优点，可用来计算真空静电场、稳定温度场、流体绕流、介质中的渗流等各类位势问题。大量算例均获得了满意的结果。     

求解位势问题的虚边界元法

本文提出了求解位势问题的虚边界元法，建立了位势问题的虚边界元的离散方程式，推导了离散化求系数的积分解析式。该方法与传统边界元法相比具有不存在奇异积分和边界附近精度较高等优点，可用来计算真空静电场，稳定温度场，流体绕流，介质中的渗流等各类位势问题，大量算例均获得了满意的结果。     

二维弹性接触问题中随机边界元法与可靠性分析

发展了二维弹性接触问题中的随机边界元法，推导并建立了相应的随机边界元基本方程，并将所发展的方法用于静强度的可靠性分析，讨论了其数值解技术。通过算例分析表明，本文发展的方法是可行的。     

考虑摩擦作用闭合裂纹应力强度因子计算的边界元分区算法

本文采用边界元分区算法研究考虑摩擦的闭合裂纹问题,简单裂纹系问题及非均匀介质中裂纹问题.在裂纹尖端采用了1/4面力奇异单元,并对相应的奇异积分给出了数值处理.对于复杂载荷下裂纹面计算给出了增量迭代算法,并采用方程减缩技术使迭代仅在裂纹上进行.计算实例表明方法是可行的.     

表面钝裂纹的计算模型及其边界元法模拟

研究了表面钝裂纹问题的边界元模拟方法。文中通过平面应变比拟，建立了三维钝型纹的计算模型和局部场结构；并由三维边界元程序计算了表面钝裂纹前沿附近的位移场和应力场；进而利用裂纹面前沿的“张开位移”推算应力强度因子的分布文中的钝裂纹模型的有效性和离散格式的收敛性进行了考核，应力强度因子计算针对含表面裂纹的平板进行。     

Study for 2D moving contact elastic body with closed crack using BEM

Using a sub-regional boundary element method, an algorithm for the two-dimensional elastic bodies with a closed crack loaded by a moving contact elastic body is proposed. Since the extent and status of the contact surface of two elastic bodies and the crack within the body are all not known in advance, a double iterative contact algorithm is used. The BEM program for solving the closed crack problems is developed, some numerical examples are calculated, and the results of the center crack cases are shown to be in good agreement with the analytical solution in the classical fracture mechanics. In the condition of friction and non-friction, some coupling computational results of the SIF for the closed crack, with different angles and loaded by a moving contact elastic body, are also obtained by a numerical computation. The project supported by the National Natural Science Foundation of China (10172053) and NJTU Foundation of China (PD-157)     

Boundary element method for moving and rolling contact of 2D elastic bodies with defects

A scheme of boundary element method for moving contact of two-dimensional elastic bodies using conforming discretization is presented. Both the displacement and the traction boundary conditions are satisfied on the contacting region in the sense of discretization. An algorithm to deal with the moving of the contact boundary on a larger possible contact region is presented. The algorithm is generalized to rolling contact problem as well. Some numerical examples of moving and rolling contact of 2D elastic bodies with or without friction, including the bodies with a hole-type defect, are given to show the effectiveness and the accuracy of the presented schemes. The project supported by the National Natural Science Foundation of China (19772025)     

BEM for simulation of a 2D elastic body with randomly distributed circular inclusions

Based on our 2D BEM software THBEM2 which can be applied to the simulation of an elastic body with randomly distributed identical circular holes, a scheme of BEM for the simulation of elastic bodies with randomly distributed circular inclusions is proposed. The numerical examples given show that the boundary element method is more accurate and more effective than the finite element method for such a problem. The scheme presented can also be successfully used to estimate the effective elastic properties of composite materials. Project supported by the National Natural Science Foundation of China (No. 19772025).     

Experimental study and BEM analysis of fatigue crack growth in a cracked heterogeneous body

A model for analysing a soft-hard heterogeneous body with a crack in the hard region is presented in this paper. The result of fatigue experiments shows that mechanical heterogeneity affects the rate of propagation of fatigue crack. Meanwhile the results computed by BEM for cracked heterogeneous bodies under cycling loading indicate that the smaller the distance between the crack and the interface of hard and soft regions is, the smaller the amplitude of crack opening displacement, COD and ofJ-integral as well at the same step during the fatigue crack growth will be. The effect of heterogeneity on the rate of fatigue crack propagation is shown by the variation of J. The smaller the distance of the crack to the interface is, the smaller the rate of fatigue crack growth will be.     

The effect of an elastic triangular inclusion on a crack

IntroductionWiththedevelopmentofparticleandfiberreinforcedcomposites,theinclusion_crackinteractionproblemisbecominganimportantfieldbeingstudied .Andasamodel,itisalsousedtostudytheeffectsofmaterialdefectsonthestrengthandfractureofengineeringstructure.TheinterationbetweencircularinclusionandcrackwasstudiedinRefs.[1 -6 ] ;InRefs.[7-1 2 ] ,theinterationbetweenlineinclusionandcrackswasdiscussed ;TheinterationbetweenellipticalinclusionandcrackwasstudiedinRefs.[1 3,1 4] .However,withthedevelopmento…     

Finite element methods for a class of continuum models for immiscible flows with moving contact lines

In this paper, we present a finite element method for two‐phase incompressible flows with moving contact lines. We use a sharp interface Navier–Stokes model for the bulk phase fluid dynamics. Surface tension forces, including Marangoni forces and viscous interfacial effects, are modeled. For describing the moving contact lines, we consider a class of continuum models that contains several special cases known from the literature. For the whole model, describing bulk fluid dynamics, surface tension forces, and contact line forces, we derive a variational formulation and a corresponding energy estimate. For handling the evolving interface numerically, the level‐set technique is applied. The discontinuous pressure is accurately approximated by using a stabilized extended finite element space. We apply a Nitsche technique to weakly impose the Navier slip conditions on the solid wall. A unified approach for discretization of the (different types of) surface tension forces and contact line forces is introduced. Results of numerical experiments are presented, which illustrate the performance of the solver. Copyright © 2016 John Wiley & Sons, Ltd.     

一种新型三角形裂尖单元及其在结构裂纹分析中的应用

构造了一种适合边界元分析裂纹问题的三角形单元,该单元中的形函数包含两部分,主要部分用于捕捉裂纹尖端上位移分布的陡峭特性(性质),另一部分为常规的拟合函数,体现裂纹尖端位置附近的物理量在其他方向上的连续分布。形函数主要部分的构造充分利用了已有理论研究获得的结论,在裂纹表面,随着距离远离尖端,位移分布与■函数保持同阶变化。在传统形函数的基础上,通过先乘以一项同阶于■的变量项,再在系数中将其在形函数所在点上的值除去,便得到新型的用于拟合裂纹尖端附近位移和面力分布的形函数。新的形函数能够满足形函数的delta性质,但归一性不再满足,因此,新的形函数只用于物理量的拟合,而几何量的拟合依然采用传统方案。通过对偶边界元方法计算裂纹尖端的张开位移后,利用一种位移外插方法计算获得应力强度因子。数值算例关注了一种无限域内的圆盘裂纹,应用新构造的三角形单元于对偶边界元中计算结构在受到斜拉力时裂纹尖端的三种应力强度因子。通过与参考解进行对比,验证了该插值方案用于对偶边界元分析裂纹问题时的正确性和高精度。     

Effect of contact interaction of the crack faces for a crack under harmonic loading

This paper is concerned with dynamic problems in fracture mechanics for elastic solids having cracks with contacting faces. The contact problem for a penny-shaped crack with a nonzero initial opening under normally incident harmonic wave is solved by the method of boundary integral equations. The solutions are compared with those that neglect the contact interaction of the crack faces. Results are presented for different values of the initial crack opening Presented at the 6th International Conference on Modern Practice in Stress and Vibration Analysis (Bath, United Kingdom, September 5–7, 2006). Published in Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 125–131, July 2007.     

A boundary element modeling of fatigue crack growth in a plane elastic plate

This paper presents an extension of a boundary element method to fatigue growth analysis of mixed-mode cracked plane elastic bodies. The method consists of the non-singular displacement discontinuity element presented by Crouch and Starfield and the crack-tip displacement discontinuity element due to the author. In the boundary element implementation the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the modified maximum strain energy density criterion. In numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the boundary element method. Crack growth is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented. Some numerical results of fatigue growth in a plane elastic plate with a center-inclined crack under uniaxial cyclic loading are given.