一种性能稳定的新单元频率选择表面

通过对十字孔径单元的四个端点添加L形的孔径,给出了一种新单元的频率选择表面(FSS)设计,同时通过拆分,得到了相对应的拆分单元FSS.利用谱域法,对两种FSS结构从理论上进行了分析,在TE波入射时角度变化、大角度入射时极化变化对中心频率的影响以及通带带宽三个方面进行了研究,并采用镀膜和光刻技术制备了两种FSS结构的实验样件,在微波暗室中进行测试,得到的实验曲线与理论仿真曲线基本一致.结果表明：新单元的两种FSS结构的中心频率均能在TE波入射时实现角度稳定性和大角度入射时实现极化稳定性;拆分单元FSS的中心 关键词： 频率选择表面(FSS) 新单元 极化稳定性 角度稳定性     

频率选择表面天线罩研究现状与发展趋势

由于雷达天线系统自身工作的特点, 他必须保证自身雷达波的正常接收和发射, 常用的隐身措施无法简单地在雷达天线隐身中获得应用. 采用频率选择表面 (FSS) 技术与天线罩技术相结合形成FSS天线罩, 可以使天线罩获得频率选择的功能. 即FSS天线罩对雷达的工作频段提供带通的传输特性, 同时改变雷达工作频段以外的雷达散射截面 (RCS) 特性, 可以实现带外隐身. 本文分析了FSS天线罩制备的基本思路, 综述了国内外FSS天线罩在结构设计、制造工艺等方面的研究状况, 并从多频FSS天线罩、智能FSS天线罩、厚屏FSS天线罩、 微型化FSS天线罩以及各技术的组合等方面对FSS天线罩的发展进行了展望. 关键词： 频率选择表面(FSS) 多频FSS天线罩 智能FSS天线罩 厚屏FSS天线罩     

一种介质-金属加载圆孔单元厚屏频率选择表面

厚屏频率选择表面能较好地改善FSS带宽性能,是实现隐身雷达天线罩的有效手段.为了全面掌握厚屏FSS的传输特性,给FSS的工程应用提供可靠依据,本文设计了一种介质-金属加载圆孔单元的厚屏频率选择表面.采用矩量法对此结构进行分析计算,主要研究了加载金属直径、加载介质厚度、电磁波入射角等几个参数对厚屏FSS传输特性的影响规律.仿真实验结果表明:带宽、中心频率及其透过率都对填充介质直径、加载金属直径、加载介质厚度、电磁波入射角和不同排列方式有不同程度的敏感性,可以通过合理调整加载金属直径及加载介质厚度来获得较宽的通带和较高的透过率.这为实现厚屏FSS在曲面隐身雷达天线罩上的应用提供了一种有价值的借鉴.     

抗方阻波动的超宽带轻薄频率选择表面吸波体

满足宽带、极化和入射角度稳定、轻薄和强吸收等高性能要求的电阻膜频率选择表面(FSS)吸波体设计难度大,且易因加工中方阻波动导致吸波性能变化.为此,本文首先分析了方阻波动影响电阻膜FSS吸波体性能的机理,提出抗方阻波动的FSS吸波体设计方法.在此基础上,提出利用不同层FSS阻抗随频率变化互补的扩展带宽方法,结合弯折小型化设计,获得了超宽带、极化和角度稳定的轻薄型抗方阻波动FSS吸波体.该FSS吸波体在TE和TM极化下,90%吸波带宽为1.50—20.50 GHz (相对带宽173%),厚度仅为0.093λ_L.TE极化波80%吸波的角度稳定性可达45°,而TM极化波90%吸波的角度稳定性可达70°.当每层FSS方阻在12—30Ω/sq范围内波动时,吸波体的90%吸波带宽仍保持在167.0%.实验测试结果与仿真结果基本吻合,证明了所提方法的有效性.     

双屏频率选择表面结构的遗传算法优化

双屏频率选择表面能够更好地实现平顶效应和快速下降的边缘,是一种实现雷达舱对探测带外雷达波隐身的有效手段.本文针对双屏频率选择表面(FSS)在电磁波不同角度入射下的宽带通应用,采用遗传算法对FSS介质厚度、介电常数、单元图形、排列周期进行了整体优化,给出优化后的FSS结构和传输特性曲线;同时采用镀膜和光刻技术制备出相应的实验件,在微波暗室进行了测试.结果表明,优化后的结构在保证2 GHz的工作带宽下,对电磁波的入射角度有良好的传输稳定性,这为实现双屏FSS在曲面大角度下的应用奠定了基础. 关键词： 频率选择表面 遗传算法 优化     

一种适用于雷达罩的频率选择表面新单元研究

从传统的频率选择选择表面(frequency selective surface,简称FSS)Y孔单元出发,提出了一种新单元.经优化设计,给出了Y孔单元和新单元的FSS结构参数,运用谱域Galerkin法对两种单元FSS的传输特性进行了数值计算.采用镀膜和光刻技术制作出相应的等效平板样件,在微波暗室对两种FSS等效平板在8—12GHz频段内的传输特性进行了测试,测试值与计算值基本一致.结果表明：与Y孔单元相比,新单元FSS在电磁波大角度(66°)入射时具有高的透过率,在电磁波大扫描角范围内(0°—66°)新单元FSS中心频率的漂移量更小.因此,所提出的新单元更适合于电磁波大角度入射下的应用,为FSS在曲面雷达罩上的应用提供了一种新单元. 关键词： 频率选择表面 中心频率 雷达罩     

微型化频率选择表面的设计研究

利用容性表面与感性表面之间的耦合机理能够制备微型化频率选择表面(MEFSS),周期单元尺寸将不受工作波长限制.为了提高MEFSS角度与极化的稳定性,展宽MEFSS的-3 dB带宽,文章结合传统频率选择表面"Y"形单元,利用"Y"图形构造容性表面的贴片单元与感性表面的网栅单元且以正三角形栅格拓展周期单元,采用矢量模匹配法对MEFSS栅格排布及其他结构参数变化进行精确计算.通过镀膜与光刻技术在0.15 mm厚聚酰亚胺膜两侧制备容性表面、感性表面并利用自由空间法测试.计算与实验结果均表明,采用正三角形栅格排布的MEFSS,-3 dB带宽达到7.6 GHz,不同极化下60°扫描时中心频点稳定在f₀,为MEFSS应用于曲面天线罩时提供理论与实验参考依据. 关键词： 天线罩 微型化频率选择表面 容性表面 感性表面     

基于离散粒子群算法的频率选择表面优化设计研究

为了解决大角度照射下的单侧介质加载的频率选择表面(frequency selective surfaces,FSS)通带高透过率和阻带高反射率要求之间的矛盾,本文采用离散粒子群算法(discrete particle swarm optimization,DPSO)优化设计FSS的周期间隔和图形几何尺寸等多个参数,在通带高透过率和阻带高反射率要求之间寻求一个最优的折衷的设计目标.仿真与试验表明:在TE电波70?照射下,采用DPSO优化出的一个半波壁厚电介质加载的密集型Y环孔径结构,其通带透过率达到80%,阻带透过率低于30%,从而为大角度照射下的天线罩提供一种优良FSS设计结果,并为解决FSS通带高透过率和阻带高反射率要求之间的矛盾提供理论指导.     

圆环单元FSS对吸波材料特性的影响研究

设计了圆环单元频率选择表面(FSS),利用谱域法对包含有圆环单元FSS的吸波材料进行了仿真研究.结果发现圆环单元FSS极大拓展了吸波材料带宽,降低了共振频率的反射率;并且吸波材料带宽随单元半径增加而增大,共振频率向低频漂移,为FSS在吸波材料中应用提供理论依据. 关键词： 频率选择表面 雷达吸波材料 带宽 谱域法     

具备多模式可切换功能的超材料结构

提出了一种新型的多功能超材料滤波器/屏蔽器,其具有双频段极化独立控制、多模式可切换等特点。与传统器件不同的是,所提出的设计能够独立控制横电（TE）或横磁（TM）极化波在不同频段的透射和反射,并且通过设置不同的二极管偏置电压,可以实现4种不同的工作模式。该结构基于等效电路模型,采用多层滤波结构设计,通过在顶层和底层加载PIN二极管实现TE和TM极化波在低频段和高频段的独立控制。在传输模式下,TE和TM波分别在3.6 GHz和4.6 GHz附近得以传输;在屏蔽模式下,该结构可以有效地阻挡入射极化波。每种模式都有非常稳定的工作状态,不会受到其他工作模式的影响。此外,该设计在0°～45°入射范围内具有良好的角度稳定性。这种多模式超材料结构可以应用于天线罩等领域,天线传输信号时能满足对特定极化信号的需求,待机时可以屏蔽信号以减少干扰。     

A novel four-legged loaded element thick-screen frequency selective surface with a stable performance

<正>A thick-screen frequency selective surface(FSS) has not only a broad bandwidth but also the advantages of overcoming the multilayer FSS shortcoming of complex structure and low transmittance of centre frequency due to the cascade of FSSs,and this means it could potentially be applied in a stealth curved streamlined radome.However,there is an unsteadiness of centre frequency in a wide range of incident angles and another unsteadiness of polarization in a big incident angle.In order to solve these problems,in this paper we provide a novel four-legged loaded element thick-screen FSS.The structure is analysed and simulated using the mode matching method and moment method.The centre frequency,the transmittance of centre frequency,and bandwidth of the structure are investigated when some parameters including the polarization at a big incident angle and the incident angles of TE & TM waves are changed. The novel four-legged loaded element thick-screen FSS has better transmission properties with a better steadiness of polarization and incident angle independence.The novel structure of the four-legged loaded element thick-screen FSS provides a valuable reference for their application in a stealth curved streamlined radome.     

Closely packed dense frequency selective surface

In order to realize wideband filtering properties of frequency selective surface （FSS）, FSS of closely packed elements is presented. The Y loop elements are chosen as the graphics elements. Based on the spectral domain method, the frequency response is analyzed for different incident angles and polarizations. The result of the numerical analysis shows that the dense FSS has wide passband with better independence of angle and polarization.     

Ku/Ka波段双通带频率选择表面设计研究

为了实现双通带频率选择表面(FSS)在较厚介质基底、 较大频带间隔和入射角度下的工程应用, 设计制备了一种性能优良的Ku/Ka波段双频FSS结构. 利用FSS栅瓣图分析了FSS具有稳定滤波特性的条件. 应用矢量模式匹配法计算了基于分形技术和复合图形技术的FSS的传输特性. 根据单元谐振模式和FSS传输特性归纳了厚介质基底、较远双通带FSS的设计原则, 最终优化出一种由方环复合“Y”环单元组成的FSS结构. 结果表明: 该结构在6.7 mm厚介质基底上0°-45°扫描范围内, 在Ku/Ka波段具有稳定的双频传输特性, 透过率均优于75%. 这为设计基底厚度较大、频带间隔较远、入射角度要求较高的双带FSS结构提供了理论参考与实验依据. 关键词： 频率选择表面 双通带 分形结构FSS 复合结构FSS     

The effect of a non-aligned unit on double-screen frequency-selective surface transmission characteristics

Double-screen frequency-selective surfaces (FSSs) can bring about a better flattened effect and a rapidly declining edge. They are therefore an effective means to achieve outer-zone stealth of the radar cabin to detect radar waves. In this article, a double-screen wide-bandpass FSS structure is designed and the transmission characteristics of the units under alignment and non-alignment are simulated by means of the spectral domain approach. Meanwhile, the experimental parts fabricated by vacuum evaporation and lithography are tested in a microwave chamber. The results show that the aligned unit structure has good incident angle stability and can achieve high transmittance when the bandwidth is 3.3 GHz, and the transmission loss is less than 1 dB. When the units have a non-aligned structure, the bandwidth decreases and transmission loss increases with increasing incident angle.     

Frequency selective surface with better polarization-independency for arbitrary incident angle

This paper investigates the frequency-selective property of a planar layer consisting of period arrays both theoretically and experimentally for different polarizations at arbitrary incident angle. The novel element is designed by loading the rectangular microstrip element with L-shaped conducting patch at its two ends. Based on the spectral-domain method, the frequency response including angle effect and polarization effect of the frequency selective surface (FSS) structure are analysed and the plots of the frequency versus transmission coefficient are obtained. As a result of the numerical analysis, it is shown that if the source polarization is changed, polarization-independence of previous FSS design can be achieved only for normal incidence, which limits most FSS applications. But in our proposed structure, the better polarization-independency for arbitrary incident angle can be achieved. It is observed that the simulated result comes very close to the experimental result.     

Frequency selective surface structure optimized by genetic algorithm

Frequency selective surface (FSS) is a two-dimensional periodic structure which has prominent characteristics of bandpass or bandblock when interacting with electromagnetic waves. In this paper, the thickness, the dielectric constant, the element graph and the arrangement periodicity of an FSS medium are investigated by Genetic Algorithm (GA) when an electromagnetic wave is incident on the FSS at a wide angle, and an optimized FSS structure and transmission characteristics are obtained. The results show that the optimized structure has better stability in relation to incident angle of electromagnetic wave and preserves the stability of centre frequency even at an incident angle as large as 80°, thereby laying the foundation for the application of FSS to curved surfaces at wide angles.     

Frequency selective surface with a flat topped passband

Two frequency selective surface (FSS) configurations with flat topped passband are presented in this paper.One configuration is single layer FSS with λ/4 thickness dielectric loaded on both sides, and the other is double layers FSS. Based on the modal matching method, the frequency response properties including angle effect and polarization effect of both FSS configurations are analyzed, and the plots of the frequency versus transmission coefficient are obtained for different incident angles and polarizations. It is shown that the structure with the single layer FSS embedded centrally in the λ/2 thickness dielectric has a wider flat top bandwidth of 6.8 GHz than that of the double layers FSS of 3 GHz. In addition, the fabrication of single layer is relatively easier than the double layers FSS.