Controlling product selection in the photodissociation of formaldehyde: direct quantum dynamics from the S1 barrier

Controlling the selectivity between H(2)+CO and H+HCO in the S(1)/S(0) nonadiabatic photodissociation of formaldehyde has been investigated using direct quantum dynamics. Simulations started from the S(1) transition state have suggested that a key feature for controlling the branching ratio of ground-state products is the size of the momentum given to the wavepacket along the transition vector. Our results show that letting the wavepacket fall down from the barrier to the conical intersection with no initial momentum leads to H(2)+CO, while extra momentum toward products favors the formation of H+HCO through the same conical intersection. Quantum dynamics results are interpreted in semiclassical terms with the aid of a Mulliken-like analysis of the final population distribution among both products and the reactant on each electronic state.     

Vibrational distributions of the CO(v) products of the C2H2 + O(3P) and HCCO + O(3P) reactions studied by FTIR emission

The C2H2 + O(3P) and HCCO + O(3P) reactions are investigated using Fourier transform infrared (FTIR) emission spectroscopy. The O(3P) radicals are produced by 193 nm photolysis of an SO2 precursor or microwave discharge in O2. The HCCO radical is either formed in the first step of the C2H2 + O(3P) reaction or by 193 nm photodissociation of ethyl ethynyl ether. Vibrationally excited CO and CO2 products are observed. The microwave discharge experiment [C2H2 + O(3P)] shows a bimodal distribution of the CO(v) product, which is due to the sequential C2H2 + O(3P) and HCCO + O(3P) reactions. The vibrational distribution of CO(v) from the HCCO + O(3P) reaction also shows its own bimodal shape. The vibrational distribution of CO(v) from C2H2 + O(3P) can be characterized by a Boltzmann plot with a vibrational temperature of approximately 2400 +/- 100 K, in agreement with previous results. The CO distribution from the HCCO + O(3P) reaction, when studied under conditions to minimize other processes, shows very little contamination from other reactions, and the distribution can be characterized by a linear combination of Boltzmann plots with two vibrational temperatures: 2320 +/- 40 and 10 300 +/- 600 K. From the experimental results and previous theoretical work, the bimodal CO(v) distribution for the HCCO + O(3P) reaction suggests a sequential dissociation process of the HC(O)CO++ --> CO + HCO; HCO --> H + CO.     

The roaming atom pathway in formaldehyde decomposition

We present a detailed experimental and theoretical investigation of formaldehyde photodissociation to H(2) and CO following excitation to the 2(1)4(1) and 2(1)4(3) transitions in S(1). The CO velocity distributions were obtained using dc slice imaging of single CO rotational states (v=0, j(CO)=5-45). These high-resolution measurements reveal the correlated internal state distribution in the H(2) cofragments. The results show that rotationally hot CO (j(CO) approximately 45) is produced in conjunction with vibrationally "cold" H(2) fragments (v=0-5): these products are formed through the well-known skewed transition state and described in detail in the accompanying paper. After excitation of formaldehyde above the threshold for the radical channel (H(2)CO-->H+HCO) we also find formation of rotationally cold CO (j(CO)=5-28) correlated to highly vibrationally excited H(2) (v=6-8). These products are formed through a novel mechanism that involves near dissociation followed by intramolecular H abstraction [D. Townsend et al., Science 306, 1158 (2004)], and that avoids the region of the transition state entirely. The dynamics of this "roaming" mechanism are the focus of this paper. The correlations between the vibrational states of H(2) and rotational states of CO formed following excitation on the 2(1)4(3) transition allow us to determine the relative contribution to molecular products from the roaming atom channel versus the conventional molecular channel.     

Photodissociation dynamics of formyl fluoride (HFCO) at 193 nm: branching ratios and distributions of kinetic energy

Following photodissociation of formyl fluoride (HFCO) at 193 nm, we detected products with fragmentation translational spectroscopy utilizing a tunable vacuum ultraviolet beam from a synchrotron for ionization. Among three primary dissociation channels observed in this work, the F-elimination channel HFCO-->HCO+F dominates, with a branching ratio approximately 0.66 and an average release of kinetic energy approximately 55 kJ mol(-1); about 17% of HCO further decomposes to H+CO. The H-elimination channel HFCO-->FCO+H has a branching ratio approximately 0.28 and an average release of kinetic energy approximately 99 kJ mol(-1); about 21% of FCO further decomposes to F+CO. The F-elimination channel likely proceeds via the S1 surface whereas the H-elimination channel proceeds via the T1 surface; both channels exhibit moderate barriers for dissociation. The molecular HF-elimination channel HFCO-->HF+CO, correlating with the ground electronic surface, has a branching ratio of only approximately 0.06; the average translational release of 93 kJ mol(-1), approximately 15% of available energy, implies that the fragments are highly internally excited. Detailed mechanisms of photodissociation are discussed.     

Photodissociation dynamics of gaseous CpCo(CO)2 and ligand exchange reactions of CpCoH2 with C3H4, C3H6, and NH3

The photodissociation dynamics of CpCo(CO)(2) was studied in a molecular beam using photofragment translational energy spectroscopy with 157 nm photoionization detection of the metallic products. At 532 and 355 nm excitation, the dominant one-photon channel involved loss of a single CO ligand producing CpCoCO. The product angular distributions were isotropic, and a large fraction of excess energy appeared as product vibrational excitation. Production of CpCO + 2CO resulted from two-photon absorption processes. The two-photon dissociation of mixtures containing CpCo(CO)(2) and H(2) at the orifice of a pulsed nozzle was used to produce a novel 16-electron unsaturated species, CpCoH(2). Transition metal ligand exchange reactions, CpCoH(2) + L → CpCoL + H(2) (L = propyne, propene, or ammonia), were studied under single-collision conditions for the first time. In all cases, ligand exchange occurred via 18-electron association complexes with lifetimes comparable to their rotational periods. Although ligand exchange reactions were not detected from CpCoH(2) collisions with methane or propane (L = CH(4) or C(3)H(8)), a molecular beam containing CpCoCH(4) was produced by photolysis of mixtures containing CpCo(CO)(2) and CH(4).     

Dynamics of CO formation in the photodissociation of HNCO and CH2CO at 193nm

The photodissociation of isocyanic acid (HNCO) and ketene (CH₂CO) at 193 nm was investigated using an ArF laser to dissociate the carbonyl compound and a CO laser to probe the resulting vibrationally excited CO. The dissociation of HNCO at 193 nm produces CO with an average vibrational energy of 4.6 ± 0.3 kcal/mol. The dissociation Gf CH₂CO at 193 nm produces CO with an average vibrational energy of 6.4 ± 0.8 kcal/mol. The observed CO vibrational energy distributions were found to be in close agreement with those predicted statistically assuming NH(a ¹Δ) + CO and CH₂(¹A₁) + CO were the photodissociation products.     

New insights on reaction dynamics from formaldehyde photodissociation

We review the photodissociation dynamics of formaldehyde with an emphasis on recent calculations that make use of a global ab initio-based potential energy surface for the S(0) state. These calculations together with recent experiments reveal striking departures from conventional transition state theory for the formation of the molecular products H(2) + CO. The evidence for this departure is reviewed in detail by examining properties of the new potential surface and results of quasiclassical trajectory dynamics calculations using this surface. We also review very recent work on the dynamics governing the formation of radical products, H + HCO. These products can be formed on the T(1) surface as well as the S(0) one, and we present some results contrasting the dynamics on these two surfaces. This work makes use of a new semi-global ab initio-based T(1) potential energy surface.     

Partial oxidation of propylene catalyzed by VO3 clusters: a density functional theory study

Density functional theory (DFT) calculations are carried out to investigate partial oxidation of propylene over neutral VO 3 clusters. C=C bond cleavage products CH 3CHO + VO 2CH 2 and HCHO + VO 2CHCH 3 can be formed overall barrierlessly from the reaction of propylene with VO 3 at room temperature. Formation of hydrogen transfer products H 2O + VO 2C 3H 4, CH 2=CHCHO + VO 2H 2, CH 3CH 2CHO + VO 2, and (CH 3) 2CO + VO 2 is subject to tiny (0.01 eV) or small (0.06 eV, 0.19 eV) overall free energy barriers, although their formation is thermodynamically more favorable than the formation of C=C bond cleavage products. These DFT results are in agreement with recent experimental observations. VO 3 regeneration processes at room temperature are also investigated through reaction of O 2 with the CC bond cleavage products VO 2CH 2 and VO 2CHCH 3. The following barrierless reaction channels are identified: VO 2CH 2 + O 2 --> VO 3 + CH 2O; VO 2CH 2 + O 2 --> VO 3C + H 2O, VO 3C + O 2 --> VO 3 + CO 2; VO 2CHCH 3 + O 2 --> VO 3 + CH 3CHO; and VO 2CHCH 3 + O 2 --> VO 3C + CH 3OH, VO 3C + O 2 --> VO 3 + CO 2. The kinetically most favorable reaction products are CH 3CHO, H 2O, and CO 2 in the gas phase model catalytic cycles. The results parallel similar behavior in the selective oxidation of propylene over condensed phase V 2O 5/SiO 2 catalysts.     

"Roaming" dynamics in CH3CHO photodissociation revealed on a global potential energy surface

We present a quasiclassical trajectory study of the photodissociation of CH3CHO to molecular and radical products, CH4 + CO and CH3 + HCO, respectively, using global ab initio-based potentials energy surfaces. The molecular products have a well-defined potential barrier transition state (TS) but the dynamics exhibit strong deviations from the TS pathway to these products. The radical products are formed via a variational TS. Calculations are reported at total energies corresponding to photolysis wavelengths of 308, 282, 264, 248 and 233 nm. The results at 308 nm focus on a comparison with experiment [Houston, P. L.; Kable, S. H. Proc. Natl. Acad. Sci. U.S.A. 2006, 103, 16079] and the elucidation of the nature and extent of non-TS reaction dynamics to form the molecular products, CH4 + CO. At the other wavelengths the focus is the branching ratio of these products and the radical products, CH3 + HCO.     

二溴代烷烃的紫外光解动力学研究

利用飞行时间质谱装置研究了234和267nm激光作用下二溴甲烷、二溴乙烷、二溴丙烷和二溴丁烷分子的光解离过程．研究表明二溴代烷烃分子在紫外激光的作用下主要是断裂C—Br键解离出一个Br原子,并且存在两种可能的布居：基态Br(^2P3/2^0)和激发态Br^*(^2P1／2^0)．通过共振增强多光子电离技术探测两种光解产物布居的分支比．对比得到了分子构型对称性不同的二溴代烷烃的分支比,提出了两种假设的光解离模型．     

Formaldehyde photodissociation: dependence on total angular momentum and rotational alignment of the CO product

Quasiclassical trajectory calculations are reported to investigate the effects of rotational excitation of formaldehyde on the branching ratios of the fragmentation products, H2+CO and H+HCO. The results of tens of thousands of trajectories show that increased rotational excitation causes suppression of the radical channel and enhancement of the molecular channel. Decomposing the molecular channel into "direct" and "roaming" channels shows that increased rotation switches from suppressing to enhancing the roaming products across our chosen energy range. However, decomposition into these pathways is difficult because the difference between them does not appear to have a distinct boundary. A vector correlation investigation of the CO rotation shows different characteristics in the roaming versus direct channels and this difference is a potentially useful signature of the roaming mechanism, as first speculated by Kable and Houston in their experimental study of photodissociation of acetaldehyde [P. L. Houston and S. H. Kable, Proc. Nat. Acad. Sci. 103, 16079 (2006)].     

Product branching ratios in photodissociation of phenyl radical: a theoretical ab initio/Rice-Ramsperger-Kassel-Marcus study

Ab initio CCSD(T)/CBS//B3LYP/6-311G** calculations of the potential energy surface for possible dissociation channels of the phenyl radical are combined with microcanonical Rice-Ramsperger-Kassel-Marcus calculations of reaction rate constants in order to predict statistical product branching ratios in photodissociation of c-C(6)H(5) at various wavelengths. The results indicate that at 248 nm the photodissociation process is dominated by the production of ortho-benzyne via direct elimination of a hydrogen atom from the phenyl radical. At 193 nm, the statistical branching ratios are computed to be 63.4%, 21.1%, and 14.4% for the o-C(6)H(4) + H, l-C(6)H(4) ((Z)-hexa-3-ene-1,5-diyne) + H, and n-C(4)H(3) + C(2)H(2) products, respectively, in a contradiction with recent experimental measurements, which showed C(4)H(3) + C(2)H(2) as the major product. Although two lower energy pathways to the i-C(4)H(3) + C(2)H(2) products are identified, they appeared to be kinetically unfavorable and the computed statistical branching ratio of i-C(4)H(3) + C(2)H(2) does not exceed 1%. To explain the disagreement with experiment, we optimized conical intersections between the ground and the first excited electronic states of C(6)H(5) and, based on their structures and energies, suggested the following photodissociation mechanism at 193 nm: c-C(6)H(5) 1 → absorption of a photon → electronically excited 1 → internal conversion to the lowest excited state → conversion to the ground electronic state via conical intersections at CI-2 or CI-3 → non-statistical decay of the vibrationally excited radical favoring the formation of the n-C(4)H(3) + C(2)H(2) products. This scenario can be attained if the intramolecular vibrational redistribution in the CI-2 or CI-3 structures in the ground electronic state is slower than their dissociation to n-C(4)H(3) + C(2)H(2) driven by the dynamical preference.     

A complete look at the multi-channel dissociation of propenal photoexcited at 193 nm: branching ratios and distributions of kinetic energy

We observed fifteen photofragments upon photolysis of propenal (acrolein, CH(2)CHCHO) at 193 nm using photofragment translational spectroscopy and selective vacuum-ultraviolet (VUV) photoionization. All the photoproducts arise from nine primary and two secondary dissociation pathways. We measured distributions of kinetic energy of products and determined branching ratios of dissociation channels. Dissociation to CH(2)CHCO + H and CH(2)CH + HCO are two major primary channels with equivalent branching ratios of 33%. The CH(2)CHCO fragment spontaneously decomposes to CH(2)CH + CO. A proportion of primary products CH(2)CH from the fission of bond C-C of propenal further decompose to CHCH + H but secondary dissociation HCO → H + CO is negligibly small. Binary dissociation to CH(2)CH(2) (or CH(3)CH) + CO and concerted three-body dissociation to C(2)H(2) + CO + H(2) have equivalent branching ratios of 14%-15%. The other channels have individual branching ratios of ～1%. The production of HCCO + CH(3) indicates the formation of intermediate methyl ketene (CH(3)CHCO) and the production of CH(2)CCH + OH and CH(2)CC + H(2)O indicate the formation of intermediate hydroxyl propadiene (CH(2)CCHOH) from isomerization of propenal. Distributions of kinetic energy release and dissociation mechanisms are discussed. This work provides a complete look and profound insight into the multi-channel dissociation mechanisms of propenal. The combination of a molecular beam apparatus and synchrotron VUV ionization allowed us to untangle the complex mechanisms of nine primary and two secondary dissociation channels.     

Imaging CH3SH photodissociation at 204 nm: the SH + CH3 channel

The SH + CH(3) product channel for the photodissociation of CH(3)SH at 204 nm was investigated using the sliced velocity map ion imaging technique with the detection of CH(3) products using state selective (2+1) resonance enhanced multiphoton ionization (REMPI). Images were measured for CH(3) formed in the ground and excited vibrational states (v(2) = 0, 1, and 2) of the umbrella mode from which the correlated SH vibrational state distributions were determined. The vibrational distribution of the SH fragment in the SH + CH(3) channel at 204 nm is clearly inverted and peaks at v = 1. The highly negative anisotropy parameter of the CH(3) (v(2) = 0, 1, and 2) products is indicative of a fast dissociation process for C-S bond cleavage. Two kinds of slower CH(3) products were also observed (one of which was partly vibrationally resolved) that are assigned to a two-step photodissociation processes, in which the first step is the production of the CH(3)S (X(2)E) radical via cleavage of the S-H bond in CH(3)SH, followed by probe laser photodissociation of nascent CH(3)S radicals yielding CH(3)(X(2)A(1), v(2) = 0-2) + S((3)P(j)/(1)D) products.     

Wavelength Dependent Photodissociation of OCS via F 31Π Rydberg State:CO(X1Σ+)+S(1D2)Product Channel

The vacuum ultraviolet photodissociation of OCS via the $F$ $3^1\Pi$ Rydberg states was investigated in the range of 134$-$140 nm by means of the time-sliced velocity map ion imaging technique. The images of S($^1$D$_2$) products from the CO($X^1\Sigma^+$)+S($^1$D$_2$) dissociation channel were acquired at five photolysis wavelengths, corresponding to a series of symmetric stretching vibrational excitations in OCS($F$ $3^1\Pi$, $v_1$=0$-$4). The total translational energy distributions, vibrational populations and angular distributions of CO($X^1\Sigma^+$, $v$) coproducts were derived. The analysis of experimental results suggests that the excited OCS molecules dissociate to CO($X^1\Sigma^+$) and S($^1$D$_2$) products via non-adiabatic couplings between the upper $F$ $3^1\Pi$ states and the lower-lying states both in the C$_{\infty \textrm{v}}$ and C$_{\rm{s}}$ symmetry. Furthermore, strong wavelength dependent behavior has been observed: the greatly distinct vibrational populations and angular distributions of CO($X^1\Sigma^+$, $v$) products from the lower ($v_1$=0$-$2) and higher ($v_1$=3, 4) vibrational states of the excited OCS($F$ $3^1\Pi$, $v_1$) demonstrate that very different mechanisms are involved in the dissociation processes. This study provides evidence for the possible contribution of vibronic coupling and the crucial role of vibronic coupling on the vacuum ultraviolet photodissociation dynamics.     

Photodissociation of ethylene sulfide at 193 nm: a photofragment translational spectroscopy study with VUV synchrotron radiation and ab initio calculations

Photodissociation of ethylene sulfide at 193 nm has been studied using photofragment translational spectroscopy and ab initio theoretical calculations. Tunable synchrotron radiation was used as a universal but selective probe of the reaction products to reveal new aspects of the photodissociation dynamics. The channel giving S + C2H4 was found to be dominated by production of ground-state sulfur atoms (S(3P):S(1D) = 1.44:1), mostly through a spin-forbidden process. The results also suggest the presence of a channel giving S(3P) in conjunction with triplet ethylene C2H4 (3B(1u)) and allow insight into the energy of the latter species near its equilibrium geometry, in which the two methylene groups occupy perpendicular planes. In addition, a channel leading to the production of H2S with C2H2 also has been observed. Our experimental results are supported and elaborated by theoretical calculations.     

Pathways and rate coefficients for the decomposition of vinoxy and acetyl radicals

The potential in the vicinity of the stationary points on the surface for the decomposition of ground-state vinoxy and acetyl radicals has been calculated using the RQCISD(T) method extrapolated to the infinite-basis set limit. Rate coefficients for the decomposition pathways of these two radicals were computed using the master equation and variational transition state theory. Agreement between our calculated rate coefficients for H + CH(2)CO <--> CH(3) + CO and experimental data is very good, without the need for empirical adjustments to the ab initio energy barriers. Multireference configuration-interaction calculations indicate two competitive channels for vinoxy decomposition, with the channel leading to H + CH(2)CO being preferred at photodissociation energies. However, at typical combustion conditions, vinoxy decomposes primarily to CO and methyl. In contrast, decomposition of acetyl shows only one decomposition channel, leading to CO and methyl. The implications of a low-lying exit channel for the calculation of theoretical rate coefficients are discussed briefly.     

Mode selective photodissociation dynamics in V+(OCO)

The electrostatic V+(OCO) complex has a vibrationally resolved photodissociation spectrum in the visible. Photodissociation produces V+ + CO2 (nonreactive pathway) and VO+ +CO (reactive pathway). Production of VO+ is energetically favored, but spin forbidden. One-photon dissociation studies confirm mode selectivity observed by Lessen et al. [J. Chem. Phys. 95, 1414 (1991)]: excitation of one quantum of rocking motion enhances VO+ production by >30%. Branching ratio measurements in one-photon dissociation are extended to higher energy. The effect of OCO antisymmetric stretch vibrations on reactivity is investigated using vibrationally mediated photodissociation, in which the OCO antisymmetric stretch is excited at 2390.9 cm(-1). Vibrationally excited molecules are then dissociated in the visible. Seven vibronic bands are investigated, involving the antisymmetric stretch alone and in combination with the CO2 bend, the V+(OCO) stretch and rock. Exciting the antisymmetric stretch leads to a approximately 15% increase in the reactive VO+ channel, compared to other states at similar energy. Combination bands involving the antisymmetric stretch all show slightly higher reactivity. Electronic structure calculations were performed to characterize the dissociation pathways and excited electronic states of V+(OCO). The geometries of reactants, products, and transition states and relative energies of quintet and triplet states were determined using hybrid density functional theory; energies were also calculated using the coupled cluster with single, double and perturbative triple excitations method. In addition, time-dependent density functional theory calculations were performed to predict the excited electronic states of quintet and triplet V+(OCO). Spin-orbit coupling of quintet states to triplet states was calculated and used to compute intersystem crossing rates, which reproduce many of the observed mode selective trends. The V+--OCO stretch and OCO antisymmetric stretch appear to enhance reactivity by increasing the intersystem crossing rate.     

Photodissociation dynamics of ketene at 157.6 nm

Photodissociation dynamics of ketene at 157.6 nm has been investigated using the photofragment translational spectroscopic technique based on photoionization detection using vacuum-ultraviolet synchrotron radiation. Three dissociation channels have been observed: CH2+CO, CH+HCO, and HCCO+H. The product translational energy distributions and angular anisotropy parameters were measured for all three observed dissociation channels, and the relative branching ratios for different channels were also estimated. The experimental results show that the direct C-C bond cleavage (CH2+CO) is the dominant channel, while H migration and elimination channels are very minor. The results in this work show that direct dissociation on excited electronic state is much more significant than the indirect dissociation via the ground state in the ketene photodissociation at 157.6 nm.     

Reactive quenching of OH A (2)Σ(+) by O(2) and CO: Experimental and nonadiabatic theoretical studies of H- and O-atom product channels

The outcomes following collisional quenching of electronically excited OH A (2)Σ(+) by O(2) and CO are examined in a combined experimental and theoretical study. The atomic products from reactive quenching are probed using two-photon laser-induced fluorescence to obtain H-atom Doppler profiles, O ((3)P(J)) atom fine structure distributions, and the relative yields of these products with H(2), O(2), and CO collision partners. The corresponding H-atom translational energy distributions are extracted for the H + O(3) and H + CO(2) product channels, in the latter case revealing that most of the available energy is funneled into internal excitation of CO(2). The experimental product branching ratios show that the O-atom producing pathways are the dominant outcomes of quenching: the OH A (2)Σ(+) + O(2) → O + HO(2) channel accounts for 48(3)% of products and the OH A (2)Σ(+) + CO → O + HCO channel yields 76(5)% of products. In addition, quenching of OH A (2)Σ(+) by O(2) generates H + O(3) products [12(3)%] and returns OH to its ground X (2)Π electronic state [40(1)%; L. P. Dempsey, T. D. Sechler, C. Murray, and M. I. Lester, J. Phys. Chem. A 113, 6851 (2009)]. Quenching of OH A (2)Σ(+) by CO also yields H + CO(2) reaction products [26(5)%]; however, OH X (2)Π (v(") = 0,1) products from nonreactive quenching are not observed. Theoretical studies characterize the properties of energy minimized conical intersections in four regions of strong nonadiabatic coupling accessible from the OH A (2)Σ(+) + CO asymptote. Three of these regions have the O-side of OH pointing toward CO, which lead to atomic H and vibrationally excited CO(2) products and∕or nonreactive quenching. In the fourth region, energy minimized points are located on a seam of conical intersection from the OH A (2)Σ(+) + CO asymptote to an energy minimized crossing with an extended OH bond length and the H-side of OH pointing toward CO in a bent configuration. This region, exoergic with respect to the reaction asymptote, is likely to be the origin of the dominant O + HCO product channel.