Schizophrenic active neutrinos and exotic sterile neutrinos

We implement a schizophrenic scenario for the active neutrinos in a model in which there are also exotic right-handed neutrinos making a model with a local U_(1)B−L$U{(1)}_{B-L}$ anomaly free. Two of right-handed neutrinos carry B−L=−4$B-L=-4$ while the third one carries B−L=5$B-L=5$. Unlike the non-exotic version of the model, in which all right-handed neutrinos carry the same B−L=−1$B-L=-1$ charge, in this case the neutrinos have their own scalar sector and no hierarchy in the Yukawa coupling in the Dirac mass term is necessary.     

The method of increments—a wavefunction-based ab initio correlation method for solids

An overview of wavefunction-based correlation methods generalised for the application to solids is presented. Those methods based on a preceding Hartree–Fock treatment explicitly calculate the many-body wavefunction in contrast to the density-functional theory which relies on the ground-state density of the system. This review focus on the so-called method of increments where the correlation energy of the solid is expanded in terms of localised orbitals or of a group of localised orbitals. The method of increments is applied to a great variety of materials, from covalent semiconductors to ionic insulators, from large band-gap materials like diamond to the half-metal α$\alpha$-tin, from large molecules like fullerenes over polymers, graphite to three-dimensional solids. Rare-gas crystals where the binding is van der Waals like are treated as well as solid mercury, where the metallic binding is entirely due to correlation. Strongly correlated systems are examined and the correlation driven metal–insulator transition is described at an ab initio level.     

Measurements of magnetostriction of paramagnetic Fe–Mo–Cu–B metallic glasses

Magnetostriction of amorphous Fe₇₉Mo₈Cu₁B₁₂, (Fe₁₂Co₁)₇₉Mo₈Cu₁B₁₂ and (Fe₉Co₁)₇₉Mo₈Cu₁B₁₂ prepared by planar flow casting was measured using a direct method. The results indicate that magnetostriction in parallel (_λ∥)$({\lambda }_{\parallel })$ and perpendicular (_λ⊥)$({\lambda }_{\perp })$ directions of applied magnetic field is linearly dependent on magnetic field. In order to determine the influences of chemical composition and the conditions of sample preparation the magnetostriction of pure BCC-Fe, Cu and Mo were also measured. Samples containing Co with Curie temperatures slightly above room temperatures were shown to exhibit a hybrid magnetostriction behaviour with both ferromagnetic and paramagnetic features.     

Massive neutrinos and cosmology

The present experimental results on neutrino flavour oscillations provide evidence for non-zero neutrino masses, but give no hint on their absolute mass scale, which is the target of beta decay and neutrinoless double-beta decay experiments. Crucial complementary information on neutrino masses can be obtained from the analysis of data on cosmological observables, such as the anisotropies of the cosmic microwave background or the distribution of large-scale structure. In this review we describe in detail how free-streaming massive neutrinos affect the evolution of cosmological perturbations. We summarize the current bounds on the sum of neutrino masses that can be derived from various combinations of cosmological data, including the most recent analysis by the WMAP team. We also discuss how future cosmological experiments are expected to be sensitive to neutrino masses well into the sub-eV range.     

The phenomenology of Dvali–Gabadadze–Porrati cosmologies

Cosmologists today are confronted with the perplexing reality that the universe is currently accelerating in its expansion. Nevertheless, the nature of the fuel that drives today's cosmic acceleration is an open and tantalizing mystery. There exists the intriguing possibility that the acceleration is not the manifestation of yet another mysterious ingredient in the cosmic gas tank (dark energy), but rather our first real lack of understanding of gravity itself, and even possibly a signal that there might exist dimensions beyond that which we can currently observe. The braneworld model of Dvali, Gabadadze and Porrati (DGP) is a theory where gravity is altered at immense distances by the excruciatingly slow leakage of gravity off our three-dimensional Universe and, as a modified-gravity theory, has pioneered this line of investigation. I review the underlying structure of DGP gravity and those phenomenological developments relevant to cosmologists interested in a pedagogical treatment of this intriguing model.     

Ferrimagnetic properties of Co/(Gd–Co) multilayers

Co/(Gd–Co) multilayers have been prepared by rf-sputtering and investigated by means of Transverse Magnetooptic Kerr Effect (TMOKE), SQUID and VSM magnetometry. The composition of amorphous _Gd0.36Co0.64${\mathrm{Gd}}_{0.36}{\mathrm{Co}}_{0.64}$ layers was chosen so that their saturation magnetization was dominated by Gd moments in all the temperature range. Co and Gd–Co layers formed a macroscopic ferrimagnetically coupled system displaying a compensation temperature. Complete magnetic moment compensation was found at such point. An inversion of TMOKE hysteresis loops and a divergent behaviour of coercivity were also observed. By changing the layers thickness it has been possible to control the magnetic characteristics of the Co/(Gd–Co) structures, in particular the compensation takes place at different temperatures.     

Voltage-induced modification in magnetic coercivity of patterned Co50Fe50 thin film on piezoelectric substrate

A controlled modulation of magnetic properties through the inverse piezoelectric (PE) effect was investigated by means of the magneto-optical Kerr effect magnetometry in a periodic array of ferromagnetic (FM) Co₅₀Fe₅₀ stripes patterned on a commercial PE substrate. The coercive field (_Hc)$(H_{\mathrm{c}})$ rise (up to 80% in virgin cycle and 25% in subsequent cycles) when a DC electric field (up to 75 kV/cm) is applied on the PE substrate manifests a magnetoelectric coupling between the PE substrate and adjacent FM layer. The electric field dependence of _Hc$H_{\mathrm{c}}$ resembles the shear strain response to electric field of the PE constituent. The differences in the hysteresis loops shape when the magnetic field is oriented parallel and perpendicular to the stripes, reveal the interplay of the shape and stress anisotropy of the ferromagnet. Besides the inherent difficulties on constructing, an epitaxial hybrid system is a promising candidate of future random access memories designation.     

Magnetism of Fe,Co, and Ni nanowires encapsulated in carbon nanotubes

We have investigated the electronic and magnetic properties of Fe, Co, and Ni nanowires encapsulated in carbon nanotubes (CNTs) using spin polarized ab initio calculation. The incorporated systems with hollow region between the nanowire and the C shell have the enhanced magnetic moments compared to the ferromagnetic nanowires tightly wrapped by CNTs. The Co nanowire encapsulated in CNTs is a strong ferromagnet and has high spin polarization regardless of the distance between the nanowire and the C shell. The results show that the Co-filled CNTs are useful for spin polarized transport nanodevice.     

Room-temperature ferromagnetic Mn-alloyed ZnO films obtained by pulsed laser deposition

Ferromagnetic, semi-insulating Mn-alloyed ZnO films with a Curie temperature above 375 K have been grown by pulsed laser deposition on c-plane sapphire substrates. Antiferromagnetic coupling is revealed by temperature-dependent magnetization measurements. The antiferromagnetic coupling would be compatible with the observed weak ferromagnetism by assuming that the magnetic moments order antiferromagnetically but nonparallel (canted). We find a clear correlation between coercivity and mosaicity of the ferromagnetic Mn-alloyed ZnO films and explain it on the basis of a coercivity mechanism known from soft magnetic materials.     

Needle-like domain structure in Co films deposited on Mo (1 1 0)

Magnetization reversal processes and domain structures have been studied in Mo(1 1 0)/Co(0 0 0 1)/Au(1 1 1) structures grown by molecular beam epitaxy on monocrystalline (11–20) sapphire substrates. Wedge-shaped samples with different Co thickness gradients relative to the Mo [0 0 1] direction were fabricated. Observation of the domain structure was performed at room temperature using Kerr microscopy in a Co thickness range varying from 5 to 50 nm, where the magnetization is oriented in the plane of the sample. A Co thickness-dependent coercivity field was determined through analysis of the domain wall position during the reversal process. A preferential orientation of magnetic domain walls was found, with the domains being needle-like. The orientation, as well as the size of the needles, depends on the Co thickness and the orientation of the magnetic field applied in the sample plane.     

Maximum entropy production principle in physics,chemistry and biology

The tendency of the entropy to a maximum as an isolated system is relaxed to the equilibrium (the second law of thermodynamics) has been known since the mid-19th century. However, independent theoretical and applied studies, which suggested the maximization of the entropy production during nonequilibrium processes (the so-called maximum entropy production principle, MEPP), appeared in the 20th century. Publications on this topic were fragmented and different research teams, which were concerned with this principle, were unaware of studies performed by other scientists. As a result, the recognition and the use of MEPP by a wider circle of researchers were considerably delayed. The objectives of the present review consist in summation and analysis of studies dealing with MEPP. The first part of the review is concerned with the thermodynamic and statistical basis of the principle (including the relationship of MEPP with the second law of thermodynamics and Prigogine's principle). Various existing applications of the principle to analysis of nonequilibrium systems will be discussed in the second part.     

Anisotropy and magnetization process in soft magnets: Principles,experiments, applications

Understanding and controlling the anisotropy energy and its effects has proved vital to the development of soft magnetic materials and their applications. Indeed, acting on composition and structure and working out specific annealing treatments, a large variety of anisotropy-governed behaviors under DC and AC excitation can be obtained. These are discussed in the present paper, together with special problems arising in the characterization of anisotropic soft magnets and a few significant applications. It is stressed how features like J$J$–H$H$ loop shape, energy losses, and magnetoresistance effects can be controlled, in crystalline and amorphous materials, by the methods of induced anisotropy. The high-frequency behavior of these materials can be strongly affected by the anisotropy field via resonant absorption of energy. This calls for tradeoff between the values of permeability and resonance frequency.     

Connection between microstructure and magnetic properties of soft magnetic materials

The magnetic behavior of soft magnetic materials is discussed with some emphasis on the connection between macroscopic properties and underlying micromagnetic energy aspects. It is shown that important conceptual gaps still exist in the interpretation of macroscopic magnetic properties in terms of the micromagnetic formulation. Different aspects of hysteresis modeling, power loss prediction and magnetic non-destructive evaluation are discussed in this perspective.     

Vibrational and rotational bound states in floppy triatomic systems: The distributed Gaussian functions approach

A variational method based on the use of bond coordinates and of a basis set expansion described by distributed Gaussian functions (DGF) is reviewed for its applications to the study of weakly bound triatomic clusters. This approach will be shown to be particularly well suited to treat very diffuse states as those presented by Noble gas (Ng) containing systems like the Ng₃, and Ng₂X, with X being also a very weakly bound atomic impurity. Several statistical properties such as radial distributions, sizes and dominance of triangular configurations for the corresponding bound states are shown to be directly obtained with this method over the whole spectrum of the floppy cluster bound states, in both the rotationless case and also when special care is taken to define rotational constants to yield rovibrational states and their energy levels.     

Fitting the flow curve of a plastically deformed silicon steel for the prediction of magnetic properties

We report measurements and modelling of magnetic effects due to plastic deformation in 2.2% Si steel, emphasizing new tensile deformation data. The modelling approach is to take the Ludwik law for the strain-hardening stress and use it to compute the dislocation density, which is then used in the computation of magnetic hysteresis. A nonlinear extrapolation is used across the discontinuous yield region to obtain the value of stress at the yield point that is used in fitting Ludwik's law to the mechanical data. The computed magnetic hysteresis exhibits sharp shearing of the loops at small deformation, in agreement with experimental behavior. Magnetic hysteresis loss is shown to follow a Ludwik-like dependence on the residual strain, but with a smaller Ludwik exponent than applies for the mechanical behavior.