Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

On the effects of uniform high suction on the rotationally symmetric flow of a conducting liquid near a stationary disc in the presence of a transverse magnetic field

In the present paper an attempt has been made to find out effects of uniform high suction in the presence of a transverse magnetic field, on the motion near a stationary plate when the fluid at a large distance above it rotates with a constant angular velocity. Series solutions for velocity components, displacement thickness and momentum thickness are obtained in the descending powers of the suction parameter a. The solutions obtained are valid for small values of the non-dimensional magnetic parameter m (= 4 _e ² H ₀ ² /) and large values of a (a2).Nomenclature a suction parameter - E electric field - E _r , E , E _z radial, azimuthal and axial components of electric field - F, G, H reduced radial, azimuthal and axial velocity components - H magnetic field - H _r , H , H _z radial, azimuthal and axial components of magnetic field - H ₀ uniform magnetic field - H* displacement thickness and momentum thickness ratio, */ - h induced magnetic field - h _r , h , h _z radial, azimuthal and axial components of induced magnetic field - J current density - m nondimensional magnetic parameter - p pressure - P reduced pressure - R Reynolds number - U ₀ representative velocity - V velocity - V _r , V , V _z radial, azimuthal and axial velocity components - w ₀ uniform suction through the disc. - density - electrical conductivity - kinematic viscosity - _e magnetic permeability - a parameter, (/)^1/2 z - a parameter, a - * displacement thickness - momentum thickness - angular velocity     

Chaos and integrability in a nonlinear wave equation

We consider the parametrized family of equations _tt ,u- _xx u-au+u ₂ ² u=O,x(0,L), with Dirichlet boundary conditions. This equation has finite-dimensional invariant manifolds of solutions. Studying the reduced equation to a four-dimensional manifold, we prove the existence of transversal homoclinic orbits to periodic solutions and of invariant sets with chaotic dynamics, provided that =2, 3, 4,.... For =1 we prove the existence of infinitely many first integrals pairwise in involution.     

Experimental analysis of scaling laws in low Re λgrid-generated turbulence

An experimental investigation of scaling laws in turbulence generated by a biplane grid for low Reynolds numbers (Re ) is presented. The present study covers a wide range of flow field conditions (from Re 2.5 to Re 36) that have not been analyzed from this point of view. It is shown that following the Kolmogorov theory a scaling range can not be observed since the separation between the energy production scales and the dissipative scales is too short. On the other hand, an extended form of scaling, the Extended Self-Similarity (ESS), permits the identification of a range of scales characterized by the same scaling exponent much wider than the one previously examined. Thus the scaling laws for the first six moments of the velocity structure function are accurately calculated by means of the ESS and an anomalous scaling with respect to the Kolmogorov theory is observed for Re down to the order of 10. As a matter of fact the scaling exponents are in good agreement with the ones that were determined at higher Re by previous experimental and numerical investigations. For Re 6 a regularization of the scaling exponents is observed as an effect of the dissipation. We also present an analysis of the universality properties of the ESS form of scaling by means of the form function and an analysis of the sensitivity of the scaling range to the Re .     

The secondary flow induced around a sphere in an oscillating stream of elastico-viscous liquid

The present paper is devoted to the theoretical study of the secondary flow induced around a sphere in an oscillating stream of an elastico-viscous liquid. The boundary layer equations are derived following Wang's method and solved by the method of successive approximations. The effect of elasticity of the liquid is to produce a reverse flow in the region close to the surface of the sphere and to shift the entire flow pattern towards the main flow. The resistance on the surface of the sphere and the steady secondary inflow increase with the elasticity of the liquid.Nomenclature a radius of the sphere - b ^ik contravariant components of a tensor - e contravariant components of the rate of strain tensor - F() see (47) - G total nondimensional resistance on the surface of the sphere - g _ik covariant components of the metric tensor - f, g, h secondary flow components introduced in (34) - k ₀ measure of relaxation time minus retardation time (elastico-viscous parameter) - K =k ₀ ²/V ₀ ² , nondimensional parameter characterizing the elasticity of the liquid - n measure of the ratio of the boundary layer thickness and the oscillation amplitude - N, T defined in (44) - p arbitrary isotropic pressure - p _ik covariant components of the stress tensor - p ^ik contravariant components of the stress tensor associated with the change of shape of the material - R =V ₀ a/v, the Reynolds number - S =a/V ₀, the Strouhall number - r, , spherical polar coordinates - u, v, w r, , component of velocity - t time - V(, t) potential velocity distribution around the sphere - V ₀ characteristic velocity - u, v, t, y, P nondimensional quantities defined in (15) - reciprocal of s - density - defined in (32) - defined in (42) - ₀ limiting viscosity for very small changes in deformation velocity - complex conjugate of - oscillation frequency - = ₀/, the kinematic coefficient of viscosity - , defined in (52) - (, y) stream function defined in (45) - =(NT/2n)^1/2 y - /t convective time derivative (1) _ik      

Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions

In this work we consider transport in ordered and disordered porous media using singlephase flow in rigid porous mediaas an example. We defineorder anddisorder in terms of geometrical integrals that arise naturally in the method of volume averaging, and we show that dependent variables for ordered media must generally be defined in terms of thecellular average. The cellular average can be constructed by means of a weighting function, thus transport processes in both ordered and disordered media can be treated with a single theory based on weighted averages. Part I provides some basic ideas associated with ordered and disordered media, weighted averages, and the theory of distributions. In Part II a generalized averaging procedure is presented and in Part III the closure problem is developed and the theory is compared with experiment. Parts IV and V provide some geometrical results for computer generated porous media.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A_e area of entrances and exits for the-phase contained within the macroscopic system, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor, m² - L general characteristic length for volume averaged quantities, m - characteristic length (pore scale) for the-phase - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - N unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p0 reference pressure in the-phase, N/m² - p traditional intrinsic volume averaged pressure, N/m² - r0 radius of a spherical averaging volume, m - r position vector, m - r position vector locating points in the-phase, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v traditional superficial volume averaged velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V/V, volume average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

Time averaged temperature distribution in a cylindrical resistor with alternating current

The non-uniform heat generation in a cylindrical resistor crossed by an alternating electric current is considered. The time averaged and dimensionless temperature distribution in the resistor is analytically evaluated. Two dimensionless functions are reported in tables which allow one to determine the time averaged temperature field for arbitrarily chosen values of the physical properties and of the radius of the resistor, of the electric current frequency, of the Biot number and of either the power generated per unit length or the effective electric current.

---

Zeitliche Temperaturverteilung in einem zylinderförmigen Wechselstromwiderstand

Zusammenfassung Es wird ungleichförmige Wärmeerzeugung in einem mit Wechselstrom belasteten Widerstand unterstellt, woraus sich die darin einstellende, zeitlich gemittelte, dimensionslose Temperaturverteilung analytisch berechnen läßt. Zwei tabellierte dimensionslose Funktionen gestatten die Bestimmung dieser Temperaturverteilung für beliebige Werte der Stoff- und Feldparameter, des Widerstandhalbmessers, der elektrischen Frequenz, der Biot-Zahl, sowie der erzeugten Leistung pro Längeneinheit oder des effektiven Stroms.

---

Nomenclature A intregration constant introduced in Eq. (15) - Bi Biot numberhr ₀/ - c speed of light in empty space - c _p specific heat at constant pressure - E electric field - E _z component ofE alongz - E amplitude of the electric field oscillations - electric permittivity - f function ofs and defined in Eq. (22) - function of defined in Eq. (45) - g function ofs and defined in Eq. (34) - h convection heat transfer coefficient - H magnetic field - i imaginary uniti=–1 - I electric current - I _eff effective electric currentI _eff=I/2 - Im imaginary part of a complex number - J current density - J _n Bessel function of first kind and ordern - thermal conductivity - magnetic permeability - ₀ magnetic permeability of free space - q _g power generated per unit volume - time average of the power generated per unit volume - Q time averaged power per unit length - r radial coordinate - R electric resistance per unit length - r ₀ radius of the cylinder - Re real part of a complex number - mass density - s dimensionless radial coordinates=r/r ₀ - s,s integration variables - electric conductivity - t time - T temperature - time averaged temperature - T _f fluid temperature outside the boundary layer - time average of the surface temperature of the cylinder - dimensionless temperature defined in Eq. (27) - x position vector - x arbitrary real variable - x integration variable - Y ₀ Bessel function of second kind and order 0 - z axial coordinate - z unit vector parallel to the axis of the cylinder - angular frequency - dimensionless parameter =r₀ - · modulus of a complex number - equal by definition     

On the closure problem for Darcy's law

In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the averaging volume, m² - B second-order tensor used to respresent the velocity deviation - b vector used to represent the pressure deviation, m^–1 - C second-order tensor related to the permeability tensor, m^–2 - D second-order tensor used to represent the velocity deviation, m² - d vector used to represent the pressure deviation, m - g gravity vector, m/s² - I unit tensor - K C ^–1,–D, Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - l _i i=1, 2, 3, lattice vectors, m - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - p pressure in the-phase, N/m ² - p intrinsic phase average pressure, N/m² - p –p , spatial deviation of the pressure in the-phase, N/m² - r position vector locating points in the-phase, m - r ₀ radius of the averaging volume, m - t time, s - v velocity vector in the-phase, m/s - v intrinsic phase average velocity in the-phase, m/s - v phase average or Darcy velocity in the \-phase, m/s - v –v , spatial deviation of the velocity in the-phase m/s - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ Greek Letters V /V volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m²     

The free energy of a macroscopic system

The statistical mechanics of classical and quantum mechanical systems interacting with many-body forces are investigated in the canonical and grand canonical ensembles. Under various general conditions on the attractive and repulsive parts of the potential energy and on the shapes of the domains _k confining the system, it is shown that the canonical free energy per particle and the grand canonical pressure have unique limits for infinite systems which are convex monotonie functions of the specific volume and chemical potential respectively, and satisfy the expected thermodynamic relations.For pure pair forces with potential (r) sufficient conditions are: (r)D ₁/r³⁺ as r0, |(r)|D ₂/r³⁺ as r (>0), and (r)-w₀ all r; the domains _k may be constructed from a finite set of bounded domains of arbitrary shape by any sequence of isotropic expansions such that the volume V(_k) approaches infinity with k.The work reported here was done while the author was on leave of absence from The Wheatstone Physics Laboratory, King's College, London W. C. 2, England.     

The theory of a vibrating-rod viscometer

The paper presents a complete theory for a viscometer based upon the principle of a circular-section rod, immersed in a fluid, performing transverse oscillations perpendicular to its axis. The theory is established as a result of a detailed analysis of the fluid flow around the rod and is subject to a number of criteria which subsequently constrain the design of an instrument. Using water as an example it is shown that a practical instrument can be designed so as to enable viscosity measurement with an accuracy of ±0.1%, although it is noted that many earlier instruments failed to satisfy one or more of the newly-established constraints.Nomenclature A, D constants in equation (46) - A _m , B _m , C _m , D _m constants in equations (50) and (51) - A _j , B _j constants in equation (14) - a _j ⁺ , a _j ^– wavenumbers given by equation (15) - C _f drag coefficient defined in equation (53) - c speed of sound - D _b drag force of fluid b - D ₀ coefficient of internal damping - E extensional modulus - f(z) initial deformation of rod - f(), F _m () functions of defined in equation (41) - F force in the rod - force per unit length near t=0 - F dimensionless force per unit length near t=0 - g _m amplitude of transient force - G modulus of rigidity - h, h* functions defined by equations (71) and (72) - H functions defined by equation (69) and (70) - I second moment of area - I _0,1, J _0,1, K _0,1 modified Bessel functions - k, k functions defined in equations (2) - L half-length of oscillator - Ma Mach number - m _b added mass per unit length of fluid b - m _s mass per unit length of solid - n _j eigenvalue defined in equations (15) and (16) - R radius of rod - R _c radius of container - r radial coordinate - T tension - T _visc temperature rise due to heat generation by viscous dissipation - t time - v _r , v radial and angular velocity components - y lateral displacement - y ₀ initial lateral displacement - y ₁, y ₂ successive maximum lateral displacement - z axial coordinate - dimensionless tension - dimensionless mass of fluid - dimensionless drag of fluid - amplification factor - logarithmic decrement in a fluid - _a , _b logarithmic decrement in fluids a and b - ₀ logarithmic decrement in vacuo - _j logarithmic decrement in mode j in a fluid - spatial resolution of amplitude - _v voltage resolution - r, , , _s, , increments in R, , , _s , , - dimensionless amplitude of oscillation - dimensionless axial coordinate - angular coordinate - _f thermal conductivity of fluid - viscosity of fluid - viscosity of fluid calculated on assumption that * - _a , _b viscosity of fluids a and b - _m constants in equation (10) - dimensionless displacement - _j j the component of - density of fluid - _a , _b density of fluids a and b - _s density of tube or rod material - dimensionless radial coordinate - * dimensionless radius of container - dimensionless times - spatial component of defined in equation (11) - _j , _tm jth, mth component of - dimensionless streamfunction - ⁰, ¹ components of in series expansion in powers of - streamfunction - dimensionless frequency (based on ) - angular frequency - ₀ angular frequency in absence of fluid and internal damping - _j angular frequency in mode j in a fluid - _a , _b frequencies in fluids a and b     

Extended Korn's inequalities and the associated best possible constants

We are concerned with the coerciveness of the strain energy E(u) (in linear elasticity) associated with a displacement vector u on the Sobolev space H¹ () or its subspaces, a domain in ⁿ representing an isotropic elastic body—certain specific cases are called Korn's inequalities. Sufficient (and necessary) conditions on the Lamé moduli for E(·) to be coercive (or uniformly positive) on such spaces are given, and the associated best possible constants are obtained for some cases.     

Zur Variationsformulierung nichtlinearer Randwertprobleme

Übersicht Es werden verschiedene Bedingungen aufgestellt, die es erlauben, die durch die beiden (Systeme von) nichtlinearen DifferentialgleichungenA (u, ) = q, B (u, ) = und Randbedingungen zusammen mit den nichtlinearen algebraischen Relationenq = C(u, ), = D(u, ) beschriebene Aufgabe durch äquivalente Variationsprobleme zu ersetzen. Dabei zeigt sich ein enger Zusammenhang mit den in der Festkörpermechanik wohlbekannten Prinzipien der virtuellen Verschiebungen und der virtuellen Kräfte. Die auf systematischem Weg konstruierten Variationsfunktionale enthalten viele in der Physik bekannte Funktionale als Sonderfälle, insbesondere jene, die in der Elastomechanik nach Green, Castigliano, Hellinger, Reißner, Hu und Washizu benannt werden.

---

Summary In this paper there are established various conditions which allow a variational formulation of the problem described by the two (systems of) nonlinear differential equationsA(u, ) = q, B(u, ) = and boundary conditions together with the nonlinear algebraic relationsq = C(u, ), = D(u, ). Besides a close relationship is revealed to the principles of virtual displacements and virtual forces which are wellknown in solid mechanics. The systematically constructed variational functional contain many functionals in physics as special cases, mainly those of Green, Castigliano, Hellinger, Reißner, Hu and Washizu in elastomechanics.

     

Representation of the rheological properties of polymer melts in terms of complex fluidity

In dynamic rheological experiments melt behavior is usually expressed in terms of complex viscosity ^* () or complex modulusG ^* (). In contrast, we attempted to use the complex fluidity ^* () = 1/µ ^* () to represent this behavior. The main interest is to simplify the complex-plane diagram and to simplify the determination of fundamental parameters such as the Newtonian viscosity or the parameter of relaxation-time distribution when a Cole-Cole type distribution can be applied. ^* () complex shear viscosity - () real part of the complex viscosity - () imaginary part of the complex viscosity - G ^* () complex shear modulus - G() storage modulus in shear - G() loss modulus in shear - J ^* () complex shear compliance - J() storage compliance in shear - J() loss compliance in shear - shear strain - rate of strain - angular frequency (rad/s) - shear stress - loss angle - ^* () complex shear fluidity - () real part of the complex fluidity - () imaginary part of the complex fluidity - ₀ zero-viscosity - ₀ average relaxation time - h parameter of relaxation-time distribution     

Existence of fast traveling waves for some parabolic equations: A dynamical systems approach

We study semilinear elliptic equationsu + cu _x =f(u,u) and ² u + cu _x =f(u,u, ² u) in infinite cylinders (x,y) × ⁿ⁺¹ using methods from dynamical systems theory. We construct invariant manifolds, which contain the set of bounded solutions and then study a singular limitc, where the equations change type from elliptic to parabolic. In particular we show that on the invariant manifolds, the elliptic equation generates a smooth dynamical system, which converges to the dynamical system generated by the parabolic limit equation. Our results imply the existence of fast traveling waves for equations like a viscous reactive 2d-Burgers equation or the Cahn-Hillard equation in infinite strips.     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

On the effects of a periodic, spanwise variation of suction upon asymptotic suction flow

Summary The effects of superposing streamwise vorticity, periodic in the lateral direction, upon two-dimensional asymptotic suction flow are analyzed. Such vorticity, generated by prescribing a spanwise variation in the suction velocity, is known to play an important role in unstable and turbulent boundary layers. The flow induced by the variation has been obtained for a freestream velocity which (i) is steady, (ii) oscillates periodically in time, (iii) changes impulsively from rest. For the oscillatory case it is shown that a frequency can exist which maximizes the induced, unsteady wall shear stress for a given spanwise period. For steady flow the heat transfer to, or from a wall at constant temperature has also been computed.Nomenclature (x, y, z) spatial coordinates - (u, v, w) corresponding components of velocity - (, , ) corresponding components of vorticity - t time - stream function for v and w - v _w mean wall suction velocity - nondimensional amplitude of variation in wall suction velocity - characteristic wavenumber for variation in direction of z - T temperature - P pressure - density - coefficient of kinematic viscosity - coefficient of thermal diffusivity - (/v _w)² - frequency of oscillation of freestream velocity - nondimensional amplitude of freestream oscillation - /v _w ² - z z - y –v _w y/ - v _w ² t/4 - /v _w - U ₀ characteristic freestream velocity - u/U ₀ - coefficient of viscosity - _w wall shear stress - Prandtl number (/) - q heat transfer to wall - T _w wall temperature - T (T _w–T)/(T _w–)     

Translatory accelerating motion of a circular disk in a viscous fluid

The exact solution of the equation of motion of a circular disk accelerated along its axis of symmetry due to an arbitrarily applied force in an otherwise still, incompressible, viscous fluid of infinite extent is obtained. The fluid resistance considered in this paper is the Stokes-flow drag which consists of the added mass effect, steady state drag, and the effect of the history of the motion. The solutions for the velocity and displacement of the circular disk are presented in explicit forms for the cases of constant and impulsive forcing functions. The importance of the effect of the history of the motion is discussed.Nomenclature a radius of the circular disk - b one half of the thickness of the circular disk - C dimensionless form of C ₁ - C ₁ magnitude of the constant force - D fluid drag force - f(t) externally applied force - F() dimensionaless form of applied force - F ₀ initial value of F - g gravitational acceleration - H() Heaviside step function - k magnitude of impulsive force - K dimensionless form of k - M a dimensionless parameter equals to (1+37#x03C0;_s/4_f) - S displacement of disk - t time - t ₁ time of application of impulsive force - u velocity of the disk - V dimensionless velocity - V ₀ initial velocity of V - V _t terminal velocity - parameter in (13) - parameter in (13) - (t) Dirac delta function - ratio of b/a - () function given in (5) - dynamical viscosity of the fluid - kinematic viscosity of the fluid - _f fluid density - _s mass density of the circular disk - dimensionless time - _i dimensionless form of t _i - dummy variable - dummy variable     

Combined natural and forced convection in a laminar wall jet along a vertical plate with uniform surface heat flux

The steady state flow and heat transfer characteristics of the combined natural and forced convection in a two dimensional, laminar, incompressible wall jet over a vertical wall are obtained for constant wall heat flux boundary condition. The velocity and temperature distribution are assumed to be power series, where the zeroth term corresponds to that for a plane wall jet in the absence of buoyancy effects. Numerical results for the momentum and thermal series functions are presented for a Prandtl number of 0.73. Wall values of the momentum and thermal series functions are presented for Prandtl numbers ranging from 0.01 to 1000.Nomenclature Gr* modified Grashof number - k thermal conductivity - Nu Nusselt number - Pr Prandtl number - q _w heat flux at the wall - Re Reynolds number - T temperature - u velocity component in x-direction - v velocity component in y-direction - x co-ordinate along the plane wall - y co-ordinate normal to the wall - () gamma function - non-dimensional co-ordinate defined in (6) - non-dimensional temperature - dynamic viscosity - kinematic viscosity - non-dimensional co-ordinate defined in (6) - density - w values at the wall - values at large distances away from the wall     

Determination of water retention in stratified porous materials

Predicted and measured water-retention values,(), were compared for repacked, stratified core samples consisting of either a sand with a stone-bearing layer or a sand with a clay loam layer in various spatial orientations. Stratified core samples were packed in submersible pressure outflow cells, then water-retention measurements were performed between matric potentials,, of 0 to -100 kPa. Predictions of() were based on a simple volume-averaging model using estimates of the relative fraction and() values of each textural component within a stratified sample. In general, predicted() curves resembled measured curves well, except at higher saturations in a sample consisting of a clay loam layer over a sand layer. In this case, the model averaged the air-entry of both materials, while the air-entry of the sample was controlled by the clay loam in contact with the cell's air-pressure inlet. In situ, avenues for air-entry generally exist around clay layers, so that the model should adequately predict air-entry for stratified formations regardless of spatial orientation of fine versus coarse layers. Agreement between measured and predicted volumetric water contents,, was variable though encouraging, with mean differences between measured and predicted values in the range of 10%. Differences in of this magnitude are expected due to variability in pore structure between samples, and do not indicate inherent problems with the volume averaging model. This suggets that explicit modeling of stratified formations through detailed characterization of the stratigraphy has the potential of yielding accurate() values. However, hydraulic-equilibration times were distinctly different for each variation in spatial orientation of textural layering, indicating that transient behavior during drainage in stratified formations is highly sensitive to the stratigraphic sequence of textural components, as well as the volume fraction of each textural component in a formation. This indicates that prolonged residence times of water, nutrients, and pollutants are likely within finer-textured layers, when conditions have resulted in drainage of underlying coarser-textured strata.