Photodissociation of vanadium, niobium, and tantalum oxide cluster cations

Transition-metal oxide clusters of the form M(n)O(m) (+)(M=V,Nb,Ta) are produced by laser vaporization in a pulsed nozzle cluster source and detected with time-of-flight mass spectrometry. Consistent with earlier work, cluster oxides for each value of n produce only a limited number of stoichiometries, where m>n. The cluster cations are mass selected and photodissociated using the second (532 nm) or third (355 nm) harmonic of a Nd:YAG (yttrium aluminum garnet) laser. All of these clusters require multiphoton conditions for dissociation, consistent with their expected strong bonding. Dissociation occurs by either elimination of oxygen or by fission, repeatedly producing clusters having the same specific stoichiometries. In oxygen elimination, vanadium species tend to lose units of O(2), whereas niobium and tantalum lose O atoms. For each metal increment n, oxygen elimination proceeds until a terminal stoichiometry is reached. Clusters having this stoichiometry do not eliminate more oxygen, but rather undergo fission, producing smaller M(n)O(m) (+) species. The smaller clusters produced as fission products represent the corresponding terminal stoichiometries for those smaller n values. The terminal stoichiometries identified are the same for V, Nb, and Ta oxide cluster cations. This behavior suggests that these clusters have stable bonding networks at their core, but additional excess oxygen at their periphery. These combined results determine that M(2)O(4) (+), M(3)O(7) (+), M(4)O(9) (+), M(5)O(12) (+), M(6)O(14) (+), and M(7)O(17) (+) have the greatest stability for V, Nb, and Ta oxide clusters.     

Photodissociation of iron oxide cluster cations

Iron oxide cluster cations, Fe(n)O(m)(+), are produced by laser vaporization in a pulsed nozzle cluster source and detected with time-of-flight mass spectrometry. The mass spectrum exhibits a limited number of stoichiometries for each value of n, where m > or = n. The cluster cations are mass selected and photodissociated using the second (532 nm) or third (355 nm) harmonic of a Nd:YAG laser. At either wavelength, multiple photon absorption is required to dissociate these clusters, which is consistent with their expected strong bonding. Cluster dissociation occurs via elimination of molecular oxygen, or by fission processes producing stable cation species. For clusters with n < 6, oxygen elimination proceeds until a terminal stoichiometry of n = m is reached. Clusters with this 1:1 stoichiometry do not eliminate oxygen, but rather undergo fission, producing smaller (FeO)n(+) species. The decomposition of larger clusters produces a variety of product cations, but those with the 1:1 stoichiometry are always the most prominent and these same species are produced repeatedly from different parent ions. These combined results establish that species of the form (FeO)n(+) have the greatest stability throughout these small iron oxide clusters.     

Photodissociation of chromium oxide cluster cations

Chromium oxide cluster cations, Cr(n)O(m)+, are produced by laser vaporization in a pulsed nozzle cluster source and detected with time-of-flight mass spectrometry. The mass spectrum exhibits a limited number of stoichiometries for each value of n, where m > n. The cluster cations are mass selected and photodissociated using the second (532 nm) or third (355 nm) harmonic output of a Nd:YAG laser. At either wavelength, multiphoton absorption is required to dissociate these clusters, which is consistent with their expected strong bonding. Cluster dissociation occurs via elimination of molecular oxygen, or by fission processes producing stable cation species and/or eliminating stable neutrals such as CrO3, Cr(2)O(5), or Cr(4)O(10). Specific cation clusters identified to be stable because they are produced repeatedly in the decomposition of larger clusters include Cr(2)O(4)+, Cr(3)O(6)+, Cr(3)O(7)+, Cr(4)O(9)+, and Cr(4)O(10)+.     

Formation and distribution of neutral vanadium, niobium, and tantalum oxide clusters: single photon ionization at 26.5 eV

Neutral vanadium, niobium, and tantalum oxide clusters are studied by single photon ionization employing a 26.5 eV/photon soft x-ray laser. During the ionization process the metal oxide clusters are almost free of fragmentation. The most stable neutral clusters of vanadium, niobium, and tantalum oxides are of the general form (MO2)0,1(M2O5)y. M2O5 is identified as a basic building unit for these three neutral metal oxide species. Each cluster family (Mm, m=1,...,9) displays at least one oxygen deficient and/or oxygen rich cluster stoichiometry in addition to the above most stable species. For tantalum and niobium families with even m, oxygen deficient clusters have the general formula (MO2)2(M2O5)y. For vanadium oxide clusters, oxygen deficient clusters are detected for all cluster families Vm (m=1,[ellipsis (horizontal)],9), with stable structures (VO2)x(V2O5)y. Oxygen rich metal oxide clusters with high ionization energies (IE>10.5 eV, 118 nm photon) are detected with general formulas expressed as (MO2)2 (M2O5)y O1,2,3. Oxygen rich clusters, in general, have up to three attached hydrogen atoms, such as VO3H1,2, V2O5H1,2, Nb2O5H1,2, etc.     

Catalytic oxidation of H2 by N2O in the gas phase: O-atom transport with atomic metal cations

Twenty-five atomic cations, M (+), that lie within the thermodynamic window for O-atom transport catalysis of the oxidation of hydrogen by nitrous oxide, have been checked for catalytic activity at room temperature with kinetic measurements using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Only 4 of these 25 atomic cations were seen to be catalytic: Fe (+), Os (+), Ir (+), and Pt (+). Two of these, Ir (+) and Pt (+), are efficient catalysts, while Fe (+) and Os (+) are not. Eighteen atomic cations (Cr (+), Mn (+), Co (+), Ni (+), Cu (+), Ge (+), Se (+), Mo (+), Ru (+), Rh (+), Sn (+), Te (+), Re (+), Pb (+), Bi (+), Eu (+), Tm (+), and Yb (+)) react too slowly at room temperature either in their oxidation with N 2O to form MO (+) or in the reduction of MO (+) by H 2. Many of these reactions are known to be spin forbidden and a few actually may lie outside the thermodynamic window. Three alkaline-earth metal monoxide cations, CaO (+), SrO (+), and BaO (+), were observed to favor MOH (+) formation in their reactions with H 2. A potential-energy landscape is computed for the oxidation of H 2 with N 2O catalyzed by Fe (+)( (6)D) that vividly illustrates the operation of an ionic catalyst and qualitatively accounts for the relative inefficiency of this catalyst.     

Photodissociation of cobalt and nickel oxide cluster cations

Cobalt and nickel oxide cluster cations, Co(x)O(y)(+) and Ni(x)O(y)(+), are produced by laser vaporization of metal rods in a pulsed nozzle cluster source and detected using time-of-flight mass spectrometry. The mass spectra show prominent stoichiometries of x = y for Co(x)O(y)(+) along with x = y and x = y - 1 for Ni(x)O(y)(+). The cluster cations are mass selected and multiphoton photodissociated using the third harmonic (355 nm) of a Nd:YAG laser. Although various channels are observed, photofragmentation exhibits two main forms of dissociation processes in each system. Co(x)O(y)(+) dissociates preferentially through the loss of O(2) and the formation of cobalt oxide clusters with a 1:1 stoichiometry. The Co(4)O(4)(+) cluster seems to be particularly stable. Ni(x)O(y)(+) fragments reveal a similar loss of O(2), although they are found to favor metal-rich fragments with stoichiometries of Ni(x)O(x-1). The Ni(2)O(+) fragment is produced from many parent ions. The patterns in fragmentation here are not nearly as strong as those seen for early or mid-period transition-metal oxides studied previously.     

Gas-phase reactions of carbon dioxide with atomic transition-metal and main-group cations: room-temperature kinetics and periodicities in reactivity

The chemistry of carbon dioxide has been surveyed systematically with 46 atomic cations at room temperature using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. The atomic cations were produced at ca. 5500 K in an ICP source and allowed to cool radiatively and to thermalize by collisions with Ar and He atoms prior to reaction downstream in a flow tube in helium buffer gas at 0.35 +/- 0.01 Torr and 295 +/- 2 K. Rate coefficients and products were measured for the reactions of first-row atomic ions from K(+) to Se(+), of second-row atomic ions from Rb(+) to Te(+) (excluding Tc(+)), and of third-row atomic ions from Cs(+) to Bi(+). CO(2) was found to react in a bimolecular fashion by O atom transfer only with 9 early transition-metal cations: the group 3 cations Sc(+), Y(+), and La(+), the group 4 cations Ti(+), Zr(+), and Hf(+), the group 5 cations Nb(+) and Ta(+), and the group 6 cation W(+). Electron spin conservation was observed to control the kinetics of O atom transfer. Addition of CO(2) was observed for the remaining 37 cations. While the rate of addition was not measurable some insight was obtained into the standard free energy change, DeltaG(o), for CO(2) ligation from equilibrium constant measurements. A periodic variation in DeltaG(o) was observed for first row cations that is consistent with previous calculations of bond energies D(0)(M(+)-CO(2)). The observed trends in D(0) and DeltaG(o) are expected from the variation in electrostatic attraction between M(+) and CO(2) which follows the trend in atomic-ion size and the trend in repulsion between the orbitals of the atomic cations and the occupied orbitals of CO(2). Higher-order CO(2) cluster ions with up to four CO(2) ligands also were observed for 24 of the atomic cations while MO(2)(+) dioxide formation by sequential O atom transfer was seen only with Hf(+), Nb(+), Ta(+), and W(+).     

Infrared spectroscopy of Cu+(H2O)(n) and Ag+(H2O)(n): coordination and solvation of noble-metal ions

M(+)(H(2)O)(n) and M(+)(H(2)O)(n)Ar ions (M=Cu and Ag) are studied for exploring coordination and solvation structures of noble-metal ions. These species are produced in a laser-vaporization cluster source and probed with infrared (IR) photodissociation spectroscopy in the OH-stretch region using a triple quadrupole mass spectrometer. Density functional theory calculations are also carried out for analyzing the experimental IR spectra. Partially resolved rotational structure observed in the spectrum of Ag(+)(H(2)O)(1) x Ar indicates that the complex is quasilinear in an Ar-Ag(+)-O configuration with the H atoms symmetrically displaced off axis. The spectra of the Ar-tagged M(+)(H(2)O)(2) are consistent with twofold coordination with a linear O-M(+)-O arrangement for these ions, which is stabilized by the s-d hybridization in M(+). Hydrogen bonding between H(2)O molecules is absent in Ag(+)(H(2)O)(3) x Ar but detected in Cu(+)(H(2)O)(3) x Ar through characteristic changes in the position and intensity of the OH-stretch transitions. The third H(2)O attaches directly to Ag(+) in a tricoordinated form, while it occupies a hydrogen-bonding site in the second shell of the dicoordinated Cu(+). The preference of the tricoordination is attributable to the inefficient 5s-4d hybridization in Ag(+), in contrast to the extensive 4s-3d hybridization in Cu(+) which retains the dicoordination. This is most likely because the s-d energy gap of Ag(+) is much larger than that of Cu(+). The fourth H(2)O occupies the second shells of the tricoordinated Ag(+) and the dicoordinated Cu(+), as extensive hydrogen bonding is observed in M(+)(H(2)O)(4) x Ar. Interestingly, the Ag(+)(H(2)O)(4) x Ar ions adopt not only the tricoordinated form but also the dicoordinated forms, which are absent in Ag(+)(H(2)O)(3) x Ar but revived at n=4. Size dependent variations in the spectra of Cu(+)(H(2)O)(n) for n=5-7 provide evidence for the completion of the second shell at n=6, where the dicoordinated Cu(+)(H(2)O)(2) subunit is surrounded by four H(2)O molecules. The gas-phase coordination number of Cu(+) is 2 and the resulting linearly coordinated structure acts as the core of further solvation processes.     

Gas-phase transuranium chemistry: reactions of actinide ions with alcohols and thiols.

The laser ablation with prompt reaction and detection method was employed to provide a survey of some gas-phase reactions of actinide (M = U, Np, Pu and Am) and lanthanide (M = Tb and Tm) ions, M(+) and MO(1,2)(+), with alcohols, thiols and ethers. Particular attention was given the changing behavior in progressing across the actinide series beyond uranium. With alcohols, ROH, major products included hydroxides and alkoxides, M(OH)(1,2)(+), M(OR)(1,2)(+), MO(OH)(+) and MO(OR)(+); these products are presumed to have resulted from RO&bond;H and R&bond;OH bond cleavage by ablated M(+) and MO(+). The abundance distributions for these elementary products reflected the decrease in stabilities of high oxidation states between U and Am. Other alcohol reaction products included electrostatically bonded adducts, such as HO&bond;Np(+)ellipsisC(3)H(7)OH, sigma-bonded organometallics, such as HO&bond;Pu(+)&bond;C(2)H(5), and pi-bonded organometallics, such as Np(+)&bond;eta(3)-?C(3)H(5)?. In view of the inability of actinide and lanthanide ions to dehydrogenate alkanes, the exhibition of dehydrogenation of the alkyl chain of alcohols, as in HO-Pu(+)-C(3)H(5)O from propanol, suggests a non-insertion mechanism involving complexation of the reactant ion to the alcohol. Whereas O abstraction products from ROH were obfuscated by directly ablated MO(1,2)(+), S abstraction from thiols, RSH, was manifested by the appearance of MS(+), MS(2)(+) and MOS(+). In analogy with OH abstraction from alcohols to produce metal hydroxides, SH abstraction from thiols resulted in hydrosulfides, including Am(SH)(+) and Np(SH)(2)(+). In addition to several other reaction pathways with the thiol reagents, products presumed to be thiolates included Am(C(3)H(7)S)(+) and NpO(C(3)H(7)S) from propanethiol. A primary product of reaction with dimethyl ether were methoxides resulting from C--O bond cleavage, including Am(OCH(3))(+) and Np(OCH(3))(2)(+). With methyl vinyl ether, more complex pathways were exhibited, most of which corresponded to the elimination of stable organic molecules. An ancillary result was the discovery of several small oxide clusters, Am(2)O(n)(+), Np(2)O(n)(+) and AmNpO(n)(+). The compositions and abundance distributions of these clusters reflected the propensity of Np to exist in higher oxidation states than Am; the dominant binary clusters were Am(2)O(2)(+) and Np(2)O(3)(+).     

Vacuum-ultraviolet (VUV) photoionization of small methanol and methanol-water clusters

In this work, we report on the vacuum-ultraviolet (VUV) photoionization of small methanol and methanol-water clusters. Clusters of methanol with water are generated via co-expansion of the gas phase constituents in a continuous supersonic jet expansion of methanol and water seeded in Ar. The resulting clusters are investigated by single photon ionization with tunable vacuum-ultraviolet synchrotron radiation and mass analyzed using reflectron mass spectrometry. Protonated methanol clusters of the form (CH3OH)nH(+) (n = 1-12) dominate the mass spectrum below the ionization energy of the methanol monomer. With an increase in water concentration, small amounts of mixed clusters of the form (CH3OH)n(H2O)H(+) (n = 2-11) are detected. The only unprotonated species observed in this work are the methanol monomer and dimer. Appearance energies are obtained from the photoionization efficiency (PIE) curves for CH3OH(+), (CH3OH)2(+), (CH3OH)nH(+) (n = 1-9), and (CH3OH)n(H2O)H(+) (n = 2-9) as a function of photon energy. With an increase in the water content in the molecular beam, there is an enhancement of photoionization intensity for the methanol dimer and protonated methanol monomer at threshold. These results are compared and contrasted to previous experimental observations.     

Interaction of molecular nitrogen and oxygen with extraframework cations in zeolites with double six-membered rings of oxygen-bridged silicon and aluminum atoms: a DFT study

The interaction of N(2) and O(2) with extraframework cations of zeolite frameworks was studied by DFT, using the B3LYP method. The extraframework cation sites located in the vicinity of the double six-member rings (D6R) of FAU zeolites (SI, SI', SIII') were considered and clusters with composition (M(n)(+))(2/)(n)()H(12)Si(10)Al(2)O(18), M = Li(+), Na(+), K(+), Ca(2+), were selected to represent the adsorption centers. The cation sites SII in the center of single six-membered rings (S6R) were modeled by [M(I)H(12)Si(4)Al(2)O(6)](-) and M(II)H(12)Si(4)Al(2)O(6) clusters. The adsorption energy of N(2) and O(2) is the highest for Li(+) cations at the SIII' cation sites, while for the SI' and SII sites the adsorption energies decrease in the order Ca(2+) > Na(+) > Li(+). The calculated small N(2) adsorption energy for Li(+) cations at SII sites suggests that these sites do not take part in the sorption process in agreement with results of NMR studies and Monte Carlo simulations. The N(2) adsorption complexes with the extraframework cations are linear, while those of O(2) are bent regardless of the extraframework cation location. The SIII' cation sites are the most favorable ones with respect to N(2) adsorption capacity and N(2)/O(2) selectivity; the SII sites are less selective and the SI sites are not accessible.     

Influence of d orbital occupation on the binding of metal ions to adenine

Threshold collision-induced dissociation of M(+)(adenine) with xenon is studied using guided ion beam mass spectrometry. M(+) includes all 10 first-row transition metal ions: Sc(+), Ti(+), V(+), Cr(+), Mn(+), Fe(+), Co(+), Ni(+), Cu(+), and Zn(+). For the systems involving the late metal ions, Cr(+) through Cu(+), the primary product corresponds to endothermic loss of the intact adenine molecule, whereas for Zn(+), this process occurs but to form Zn + adenine(+). For the complexes to the early metal ions, Sc(+), Ti(+), and V(+), intact ligand loss competes with endothermic elimination of purine and of HCN to form MNH(+) and M(+)(C(4)H(4)N(4)), respectively, as the primary ionic products. For Sc(+), loss of ammonia is also a prominent process at low energies. Several minor channels corresponding to formation of M(+)(C(x)H(x)N(x)), x = 1-3, are also observed for these three systems at elevated energies. The energy-dependent collision-induced dissociation cross sections for M(+)(adenine), where M(+) = V(+) through Zn(+), are modeled to yield thresholds that are directly related to 0 and 298 K bond dissociation energies for M(+)-adenine after accounting for the effects of multiple ion-molecule collisions, kinetic and internal energy distributions of the reactants, and dissociation lifetimes. The measured bond energies are compared to those previously studied for simple nitrogen donor ligands, NH(3) and pyrimidine, and to results for alkali metal cations bound to adenine. Trends in these results and theoretical calculations on Cu(+)(adenine) suggest distinct differences in the binding site propensities of adenine to the alkali vs transition metal ions, a consequence of s-dsigma hybridization on the latter.     

Experimental and theoretical studies of reactions of neutral vanadium and tantalum oxide clusters with NO and NH3

Reactions of neutral vanadium and tantalum oxide clusters with NO, NH(3), and an NO/NH(3) mixture in a fast flow reactor are investigated by time of flight mass spectrometry and density functional theory (DFT) calculations. Single photon ionization through a 46.9 nm (26.5 eV) extreme ultraviolet (EUV) laser is employed to detect both neutral cluster distributions and reaction products. Association products VO(3)NO and V(2)O(5)NO are detected for V(m)O(n) clusters reacting with pure NO, and reaction products, TaO(3,4)(NO)(1,2), Ta(2)O(5)NO, Ta(2)O(6)(NO)(1-3), and Ta(3)O(8)(NO)(1,2) are generated for Ta(m)O(n) clusters reacting with NO. In both instances, oxygen-rich clusters are the active metal oxide species for the reaction M(m)O(n)+NO→M(m)O(n)(NO)(x). Both V(m)O(n) and Ta(m)O(n) cluster systems are very active with NH(3). The main products of the reactions with NH(3) result from the adsorption of one or two NH(3) molecules on the respective clusters. A gas mixture of NO:NH(3) (9:1) is also added into the fast flow reactor: the V(m)O(n) cluster system forms stable, observable clusters with only NH(3) and no V(m)O(n)(NO)(x)(NH(3))(y) species are detected; the Ta(m)O(n) cluster system forms stable, observable mixed clusters, Ta(m)O(n)(NO)(x)(NH(3))(y), as well as Ta(m)O(n)(NO)(x) and Ta(m)O(n)(NH(3))(y) individual clusters, under similar conditions. The mechanisms for the reactions of neutral V(m)O(n) and Ta(m)O(n) clusters with NO/NH(3) are explored via DFT calculations. Ta(m)O(n) clusters form stable complexes based on the coadsorption of NO and NH(3). V(m)O(n) clusters form weakly bound complexes following the reaction pathway toward end products N(2)+H(2)O without barrier. The calculations give an interpretation of the experimental data that is consistent with the condensed phase reactivity of V(m)O(n) catalyst and suggest the formation of intermediates in the catalytic chemistry.     

Reactions of methyl fluoride with atomic transition-metal and main-group cations: gas-phase room-temperature kinetics and periodicities in reactivity

Reactions of CH(3)F have been surveyed systematically at room temperature with 46 different atomic cations using an inductively coupled plasma/selected-ion flow tube tandem mass spectrometer. Rate coefficients and product distributions were measured for the reactions of fourth-period atomic ions from K(+) to Se(+), of fifth-period atomic ions from Rb(+) to Te(+) (excluding Tc(+)), and of sixth-period atomic ions from Cs(+) to Bi(+). Primary reaction channels were observed corresponding to F atom transfer, CH(3)F addition, HF elimination, and H(2) elimination. The early-transition-metal cations exhibit a much more active chemistry than the late-transition-metal cations, and there are periodic features in the chemical activity and reaction efficiency that maximize with Ti(+), As(+), Y(+), Hf(+), and Pt(+). F atom transfer appears to be thermodynamically controlled, although a periodic variation in efficiency is observed within the early-transition-metal cations which maximizes with Ti(+), Y(+), and Hf(+). Addition of CH(3)F was observed exclusively (>99%) with the late-fourth-period cations from Mn(+) to Ga(+), the fifth-period cations from Ru(+) to Te(+), and the sixth-period cations from Hg(+) to Bi(+) as well as Re(+). Periodic trends are observed in the effective bimolecular rate coefficient for CH(3)F addition, and these are consistent with expected trends in the electrostatic binding energies of the adduct ions and measured trends in the standard free energy of addition. HF elimination is the major reaction channel with As(+), while dehydrogenation dominates the reactions of W(+), Os(+), Ir(+), and Pt(+). Sequential F atom transfer is observed with the early-transition-metal cations, with the number of F atoms transferred increasing across the periodic table from two to four, maximizing at four for the group 5 cations Nb(+)(d(4)) and Ta(+)(d(3)s(1)), and stopping at two with V(+)(d(4)). Sequential CH(3)F addition was observed with many atomic cations and all of the metal mono- and multifluoride cations that were formed.     

Rational synthesis and characterization of the mixed-metal organometallic polyoxometalates [Cp*Mo(x)W(6-x)O18]- (x = 0, 1, 5, 6)

The reaction between the oxometallic complexes Cp*(2)M(2)O(5) and Na(2)M'O(4) (M, M' = Mo, W) in a 1:10 molar ratio in an acidic aqueous medium constitutes a mild and selective entry into the anionic Lindqvist-type hexametallic organometallic mixed oxides [Cp*Mo(x)W(6-x)O(18)](-) [x = 6 (1), 5 (2), 1 (3), 0 (4)]. All of these compounds have been isolated as salts of nBu(4)N(+) (a), nBu(4)P(+) (b), and Ph(4)P(+) (c) cations and two of them (1 and 3) also with the n-butylpyridinium (nBuPyr(+), d) cation. The compounds have been characterized by elemental analyses, thermogravimetric analyses, electrospray mass spectrometry, and IR spectroscopy. The molecular identity and geometry of compounds 1c, 2a, and 2c have been confirmed by single-crystal X-ray diffraction. Density functional theory calculations on models obtained by replacing Cp* with Cp (I-IV) have provided information on the assignment of the terminal M═O and bridging M-O-M vibrations.     

Hydrogenation of fragment cations produced by femtosecond laser ablation of boron nitride

Cations (positive ions) produced by laser ablation of boron nitride (BN) have been mass analyzed and the size-dependent hydrogenation reactivity is revealed for the first time. The main product cations determined by femtosecond laser ablation (fsLA) were a series of B(BN)(n)(+), with much lesser production of B(2)(BN)(k)(+) and N(BN)(m)O(+) series cations. Least-squares fitting of the relative yields of hydrogenated cations indicates that the yield of B(BN)(n)H(+) almost diminishes for n ≥ 5 and that of B(BN)(n)H(2)(+) increases as n increases. Based on the different n-dependence and electronic structures of B(BN)(n) and B(BN)(n)(+), B(BN)(n) is likely to be the precursor of B(BN)(n)H(+), and B(BN)(n)(+) that of B(BN)(n)H(2)(+). In contrast to fsLA, the production of H(+) by nanosecond laser ablation is not observed and the production of various cationic species makes it difficult to identify either the fragment species or their hydrogenated products. This observation highlights the significant efficiency of fsLA in producing H(+) (and presumably H) from the surface adsorbates.     

Carbon disulfide reactions with atomic transition-metal and main-group cations: gas-phase room-temperature kinetics and periodicities in reactivity

The reactions of 46 atomic-metal cations with CS2 have been investigated at room temperature using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and products were measured for the reactions of fourth-period atomic ions from K+ to Se+, of fifth-period atomic ions from Rb+ to Te+ (excluding Tc+), and of sixth-period atomic ions from Cs+ to Bi+. Primary reaction channels were observed leading to S-atom transfer, CS2 addition and, with Hg+, electron transfer. S-atom transfer appears to be thermodynamically controlled and occurs exclusively, and with unit efficiency, in the reactions with most early transition-metal cations (Sc+, Ti+, Y+, Zr+, Nb+, La+, Hf+, Ta+, and W+) and with several main-group cations (As+, Sb+) and less efficiently with Se+, Re+ and Os+. Other ions, including most late transition and main-group metal cations, react with CS2 with measurable rates mostly through CS2 addition or not at all (K+, Rb+, Cs+). Traces of excited states (< 10%) were seen from an inspection of the observed product ions to be involved in the reactions with Mo+, Te+, Ba+ and Au+ and possibly Pt+ and Ir+. The primary products YS+, ZrS+, NbS+, HfS+, TaS+, WS+, ReS+ and OsS+ react further by S-atom transfer to form MS2(+), and TaS2(+) reacts further to form TaS3(+). CS2 addition occurs with the cations MCS2(+), MS+, MS2(+), CS2(+), and TaS3(+) to form M+(CS2)(n) (n < or = 4), MS+(CS2)(n) (n < or = 4), MS2(+)(CS2)(n) (n < or = 3), (CS2)2(+) and TaS3(+)(CS2). Up to four CS2 molecules add sequentially to bare metal cations and monosulfide cations, and three to disulfide cations. Equilibrium constant measurements are reported that provide some insight into the standard free energy change for CS2 ligation. Periodic variations in deltaG degrees are as expected from the variation in electrostatic attraction, which follows the trend in atomic-ion size and the trend in repulsion between the orbitals of the atomic cations and the occupied orbitals of CS2.     

Theoretical study of Al(n) and Al(n)O (n = 2-10) clusters

The stable structures, energies, and electronic properties of neutral, cationic, and anionic clusters of Al(n) (n = 2-10) are studied systematically at the B3LYP/6-311G(2d) level. We find that our optimized structures of Al5(+), Al9(+), Al9(-), Al10, Al10(+), and Al10(-) clusters are more stable than the corresponding ones proposed in previous literature reports. For the studied neutral aluminum clusters, our results show that the stability has an odd/even alternation phenomenon. We also find that the Al3, Al7, Al7(+), and Al7(-) structures are more stable than their neighbors according to their binding energies. For Al7(+) with a special stability, the nucleus-independent chemical shifts and resonance energies are calculated to evaluate its aromaticity. In addition, we present results on hardness, ionization potential, and electron detachment energy. On the basis of the stable structures of the neutral Al(n) (n = 2-10) clusters, the Al(n)O (n = 2-10) clusters are further investigated at the B3LYP/6-311G(2d), and the lowest-energy structures are searched. The structures show that oxygen tends to either be absorbed at the surface of the aluminum clusters or be inserted between Al atoms to form an Al(n-1)OAl motif, of which the Al(n-1) part retains the stable structure of pure aluminum clusters.     

Hydration energies in the gas phase of select (MX)mM+ ions, where M+ = Na+, K+, Rb+, Cs+, NH4+ and X- = F-, Cl-, Br-, I-, NO2-, NO3-. Observed magic numbers of (MX)mM+ ions and their possible significance

The sequential hydration energies and entropies with up to four water molecules were obtained for MXM(+) = NaFNa(+), NaClNa(+), NaBrNa(+), NaINa(+), NaNO(2)Na(+), NaNO(3)Na(+), KFK(+), KBrK(+), KIK(+), RbIRb(+), CsICs(+), NH(4)BrNH(4)(+), and NH(4)INH(4)(+) from the hydration equilibria in the gas phase with a reaction chamber attached to a mass spectrometer. The MXM(+) ions as well as (MX)(m)M(+) and higher charged ions such as (MX)(m)M(2)(2+) were obtained with electrospray. The observed trends of the hydration energies of MXM(+) with changing positive ion M(+) or the negative ion X(-) could be rationalized on the basis of simple electrostatics. The most important contribution to the (MXM-OH(2))(+) bond is the interaction of the permanent and induced dipole of water with the positive charge of the nearest-neighbor M(+) ion. The repulsion due to the water dipole and the more distant X(-) has a much smaller effect. Therefore, the bonding in (MXM-OH(2))(+) for constant M and different X ions changes very little. Similarly, for constant X and different M, the bonding follows the hydration energy trends observed for the naked M(+) ions. The sequential hydration bond energies for MXM(H(2)O)(n)(+) decrease with n in pairs, where for n = 1 and n = 2 the values are almost equal, followed by a drop in the values for n = 3 and n = 4, that again are almost equal. The hydration energies of (MX)(m)M(+) decrease with m. The mass spectra with NaCl, obtained with electrospray and observed in the absence of water vapor, show peaks of unusually high intensities (magic numbers) at m = 4, 13, and 22. Experiments with variable electrical potentials in the mass spectrometer interface showed that some but not all of the ion intensity differentiation leading to magic numbers is due to collision-induced decomposition of higher mass M(MX)(m)(+) and M(2)(MX)(m)(2+) ions in the interface. However, considerable magic character is retained in the absence of excitation. This result indicates that the magic ions are present also in the saturated solution of the droplets produced by electrospray and are thus representative of particularly stable nanocrystals in the saturated solution. Hydration equilibrium determinations in the gas phase demonstrated weaker hydration of the magic ion (NaCl)(4)Na(+).     

Photodissociation of metal-silicon clusters: encapsulated versus surface-bound metal

Metal-silicon cluster cations of the form MSi(n)+ (M = Cu, Ag, Cr) are produced in a molecular beam with pulsed laser vaporization. These species are mass-selected in a reflectron time-of-flight spectrometer and studied with laser photodissociation at 532 and 355 nm. For the noble metals copper and silver, photodissociation of the n = 7 and 10 clusters proceeds primarily by the loss of metal atoms, indicating that the metal is not located within the interior of silicon cages, and that metal-silicon bonding is weaker than silicon-silicon bonding. Chromium-silicon clusters for n = 7 also lose primarily the metal atom, but at n = 15 and 16 these dissociate via the loss of silicon, producing smaller metal-silicon species. This behavior is consistent with stronger metal-silicon bonding and encapsulated metal structures, as suggested previously by theory. MSi6(+) cations are produced efficiently in all of these photodissociation processes, indicating that these species have enhanced stability compared to other small clusters. Improved values are obtained for the ionization potentials of Si7 and Si10.