含联苯结构侧链液晶聚合物的合成及相行为的研究

液晶聚合物从结构上可分为3种:侧链型、主链型和主侧链型。侧链型液晶聚合物主要是聚丙烯酸酯类、聚硅氧烷类以及磷腈聚合物类。Gray等对聚丙烯酸酯类含不同取代基的联苯结构液晶聚合物进行了研究,结果表明无间隔基且取代基为氰基和饱和脂肪基时,该聚合物呈现近晶型液晶行为。为了增加介晶单元的长径比及刚性,本文在聚甲基丙烯酸酯侧链     

一种西佛碱侧链型液晶高分子的合成及表征

一种西佛碱侧链型液晶高分子的合成及表征邹友思，林国良，姚青青，戴李宗，潘容华（厦门大学化学系厦门３６１００５）关键词联苯，西佛碱，侧链型，液晶高分子，基团转移聚合Ｆｉｎｋｅｌｌｎａｎｎ等提出的柔性基去偶合概念’］已在侧链型液晶高分子的研究中得到了证实...     

手征性侧链液晶高分子取向结构的研究

用偏光显微镜,红外二色性和Ｘ 射线衍射研究了一种手征性侧链液晶高分子的相态织构和弛豫行为．偏光显微镜观察这种侧链液晶高分子冻结取向液晶态薄膜时,可观察到与剪切方向垂直的明暗相间的条带织构．红外二向色性的结果表明,取向态中侧链上的介晶基元倾向于与剪切方向垂直排列．取向和非取向膜的Ｘ射线衍射揭示了该侧链液晶高分子具有反铁电性液晶的两套反相螺旋结构．取向薄膜在液晶态的弛豫行为表明,取向作用能促进侧链高分子近晶相层状结构的生长,而且介晶基元的取向在弛豫过程中能保持下来．     

侧链聚硅氧烷液晶高分子的合成与表征及应用研究

液晶高分子既具有独特的液晶性 ,又具有高分子的良好材料性能 ,引起了人们的广泛注意[1～ 9] .侧链液晶高分子大多可以作为功能材料 ,对它们的研究有很大的理论与现实意义 .以往报道的此类化合物的介晶基元大多是通过烷氧基与间隔基相连[10 ] .我们以催化活性很高的铂络和物为催化剂 ,通过硅氢加成反应制备了间隔基与介晶基元通过酰氧基相连的两种侧链聚硅氧烷液晶高分子 ,并对它们的性质进行了初步表征 .发现它们具有很好的液晶性 .已有研究表明侧链聚硅氧烷液晶在气相色谱分离结构近似的物质方面 ,具有易涂渍、选择性及热稳定性优于低分子…     

刚性链侧链型液晶高分子（甲壳型液晶高分子）研究进展

普通的侧链型液晶高分子属柔性链高分子,而“甲壳型液晶高分子”虽从化学结构着属于侧链型液晶高分子,其性质却和典型的眩链型液晶高分子相似,具有很大的分子链刚性。本文介绍了“甲型液晶高分子”这一科学概念及其研究进展,并对尚待解决的问题进行了探讨。     

含1,3,4-噁二唑甲壳型液晶聚合物的合成与表征

甲壳型液晶聚合物（mesogen-jacketed liquid crystal polymer,MJLCP）是1987年由周其凤教授[1]首先提出的概念.从化学结构看,甲壳型液晶聚合物属于侧链型,由烯类单体经链式聚合制得,容易得到高分子量的产物,具有一般柔性侧链型液晶聚合物的一些优点.但是与柔性侧链型液晶聚合物不同的是,MJLCP分子中的刚性液晶基元是通过腰部或重心位置与主链相联结的,在主链与刚性液晶基元的侧基之间只有很短或者没有柔性间隔基.由于在这类液晶聚合物的分子主链周围空间内刚性液晶基元的密度很高,分子主链被由液晶基元形成的外壳所包裹并被迫采取相对伸直的刚性链构象.因此,这类液晶聚合物又和主链型刚性链液晶聚合物相似,具有较明显的链刚性.近年来,周其凤课题组围绕甲壳型液晶聚合物深入开展了分子设计与合成、分子结构与性能等多方面的研究.其中,设计合成具有特定功能的甲壳型液晶聚合物是在以往研究工作和学科交叉融合的基础上发展起来的一项新的研究工作.将一些有特殊功能的基团引入到甲壳型液晶聚合物中会使其具有崭新的特性.     

一种通过分子间氢键自组装的侧链液晶聚合物

一种通过分子间氢键自组装的侧链液晶聚合物邢佩祥，赵英英，汤心颐，姜炳政（吉林大学化学系，长春，１３００２３）（中国科学院长春应用化学研究所高分子物理开放实验室）关键词氢键，侧链液晶聚合物，近晶相，自组装自Ｒｉｎｇｓｄｏｒｆ［１］等提出在介晶基团与主链...     

一种侧链液晶高分子的合成与表征

合成了一种主链为甲基丙烯酸酯 ,侧链是三个苯环以酯键相连的介晶基元 ,柔性间隔段为两个亚甲基的新的侧链液晶高分子 .聚合物和单体的化学结构、液晶相转变和液晶态织构采用红外光谱、核磁共振、偏光显微镜、差热分析和广角X光衍射进行了表征 .研究表明 ,单体呈现近晶相和向列相两个液晶相 ,聚合物在很宽的温度范围内呈向列相 .该单体和聚合物在一定条件下可形成固化诱导条带织构     

基于“多链超分子柱”的侧链液晶高分子柱状相

一些具有伸展构象的侧链液晶高分子,如甲壳型液晶高分子或树枝化高分子,可以经由分子链的平行排列而呈现柱状液晶相.一般认为,该类柱状相的基本结构单元是单根高分子链所形成的超分子柱.而以几根链组装形成的超分子柱,即"多链超分子柱",也可作为侧链液晶高分子柱状相的基本结构单元,但多年以来这一现象并未引起人们的重视.近期,我们以hemiphasmid型侧链液晶高分子为研究对象,阐明了"多链超分子柱"是侧链液晶高分子柱状相微相分离的一种重要形式.本文从hemiphasmid型侧链液晶高分子的柱状相结构分析、化学结构对"多链超分子柱"的影响、"多链超分子柱"模型的理论分析与预测、"多链超分子柱"的"柱内缠结"以及hemiphasmid型侧链液晶聚降冰片烯的功能性等若干方面,对基于"多链超分子柱"的侧链液晶高分子柱状相进行了介绍.我们认为,深入研究"多链超分子柱"性质,将拓展侧链液晶高分子的应用领域,加深对高分子物理基本问题的认识.     

一类新的刚性链侧链型液晶高分子的合成

以自由基聚合方法，合成了一系列含有三个苯环通过酯键相联的液晶性单体及其聚合物．在这类新的液晶高分子中，刚性液晶基元不通过柔性间隔基而直接竖挂在聚甲基丙烯酸酯大分子主链上．这些高分子有很高的玻璃化转变温度，表明其分子链刚性较大，因而代表了一类新的刚性链侧链型液晶高分子．它们的液晶行为用ＤＳＣ、偏光显微镜和Ｘ－光衍射进行了表征．发现所有单体和聚合物均为向列型热致性液晶．     

Stereospecific polymerization of methacrylonitrile. VI. Effect of esters as a complexing agent with diethylmagnesium catalyst

The stereospecific polymerizations of methacrylonitrile with diethylmagnesium were carefully studied by using various ethers as complexing agents. The complexed ethers exhibit a beneficial effect on the stereoregularity of the resulting polymer, namely, the crystallinity increased by using ethers as a complexing agent. The polymerization rate and the molecular weight of the polymer also increased by using ether-complexed catalysts. The polymerization behavior was studied with the dioxane–diethylmagnesium complex as a typical complexed catalyst. The behavior was mostly similar to that of the diethymagnesium alone, that is, the rate of the polymerization increased in proportion to monomer concentration, and the solubility index increased with increasing monomer concentration. Interestingly, the viscosity of the acetone-insoluble fraction increased with increasing monomer concentration, while that of the acetone-soluble fraction was independent of monomer concentration. This is explained by considering that the catalyst has at least two kinds of catalytic species, one being the species that produces the crystalline polymer by a coordinated anionic polymerization, another being the one from which an amorphous polymer is obtained by a conventional anionic mechanism. The fact that the viscosity of the polymer decreased with increasing the initiator concentration is explained in terms of chain trasfer to the initiator. In case of diethylmagnesium alone, the viscosity of the polymer is independent of the initiator concentration.     

Copper‐mediated initiators for continuous activator regeneration atom transfer radical polymerization of acrylonitrile

Initiators for continuous activator regeneration atom transfer radical polymerization technique was first accessed to acrylonitrile by using CuBr₂/2,2′‐bipyridine as the catalyst, ethyl 2‐bromoisobutyrate as the halogen initiator, and azobis(isobutyronitrile) as the free radical initiator. The key to success is ascribed to the facile achievement of the rapid equilibrium between active species and dormant species. Effects of ligand, catalyst concentration, free radical initiator concentration, and reaction temperature on the polymerization reaction and molecular weight (MW) as well as polydispersity index (PDI) were investigated in detail. The polymerization proceeded in a controlled/living fashion even though the concentration of copper catalyst decreased to 50 ppm, which is evident in pseudo first‐order kinetics of polymerization, linear increase of molecular weight, low PDI, and high chain‐end functionality of the generated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Low-temperature polymerization of lactams by using as catalyst the salt derived from NaAlEt4 and monomer and with several compounds as initiator

Low-temperature polymerization of α-pyrrolidone, α-piperidone, and ?-caprolactam was examined by using the salts derived from NaAlEt₄ and monomer, sodium lactamates, or the salt derived from AlEt₃ and monomer as catalyst and with N-acetyl lactams, ethyl acetate, or lactones as initiator. Sodium lactamate catalyst gave unsatisfactory results in the cases of ethyl acetate or lactones initiators, and gave the following order for the relative efficiency of initiators: N-acetyl lactam > ?-caprolactone ≥ ethyl acetate > β-propiolactone. The polymerization results obtained by the salt from NaAlEt₄ catalyst–ethyl acetate initiator system were nearly the same as those with N-acetyl lactam. The increases in the degree of polymerization and in the yield of polymer were observed in case of the salt from NaAlEt₄ catalyst-lactone initiator system, particularly in the cases of α-piperidone and ?-caprolactam. Also an incorporation of initiator into polymer chain was observed.     

(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

水溶液中单电子转移活性自由基聚合法制备新型阳离子共聚丙烯酰胺/丙烯酸酯

以咪唑、丙烯腈和溴辛烷等为原料,合成了新型阳离子型可聚合离子液体表面活性剂单体：氯化-1-正辛基-3-（4-丙烯酸丁酯基）咪唑（PMOIH8）。 以2-氯丙酰胺为引发剂,Cu0粉/三-（2-二甲氨基乙基）-Me-6-TREN为催化体系,采用单电子转移活性自由基聚合法对丙烯酰胺（AM）、PMOIH8进行了二元共聚合反应,合成了一种新型阳离子共聚丙烯酰胺/丙烯酸酯P（AM/PMOIH）。 FT-IR、MS和1H NMR分析表明,所得聚合物为目标产物,采用GPC测得聚合物的相对分子质量为2×103~14×103,相对分子质量分布Mw/Mn在1.21~1.75之间。 考察了催化剂、引发剂等因素对聚合的影响。 结果表明,降低催化剂用量,聚合反应速率变慢,链增长速率常数kappp由0.0168 min-1降低至0.0065 min-1,Mw/Mn由1.25~1.71增加至1.32~1.75,引发效率Ieff=90.24%;增加引发剂用量,Mw/Mn由1.25~1.71减小至1.21~1.68,kappp由0.0168 min-1增加至0.0201 min-1,Ieff增加至93.17%。     

离子液体中单电子转移活性自由基聚合法制备星形聚丙烯酰胺

以季戊四醇为原料,合成了2,2-二溴甲基-1,3-二溴丙烷(PEBr4),并以此为四官能度引发剂,Cu0粉/三-(2-二甲氨基乙基)胺(Me6-TREN)为催化体系,在离子液体中实现了丙烯酰胺(AM)的单电子转移活性自由基聚合(SET-LRP),得到了窄分子量分布的星形聚丙烯酰胺(PAM),Mw/Mn约为1.26(MGPCn=14.1×103,转化率为43.4%)。 采用1H NMR对PAM结构进行表征确认,并采用GPC测定了PAM的分子量及分子量分布;考察了水、单体/催化剂(引发剂)配比对聚合反应的影响。 结果表明,少量水的加入能够加快聚合反应,使链增长速率常数由kappp=0.042 4 h-1增加至kappp=0.148 6 h-1;催化剂、引发剂用量越大,AM的SET-LRP的聚合反应速率越快,聚合反应的可控性越好,Mn随催化剂用量的增大及引发剂用量的减小而增大,且与理论分子量相近,分子量分布均呈下降趋势。     

基团转移聚合反应

本文介绍一种合成聚合物的新方法:基团转移聚合反应,它是以活性硅烷基化合物为引发剂在一定的催化剂存在下使α,β不饱和羰基化合物聚合成"活性聚合物",它可控制有一定分子量和较窄的分布。也可用于制备嵌段共聚物和遥爪聚合物。并介绍了新近的进展和它的应用。     

含偶氮聚四氢呋喃的合成及分解

<正> 本文以4,4′-偶氮二异氰基戊酰氯(ACVCl)与SbCl_5引发体系,低温下进行THF聚合,合成出主链中含有一个偶氮基的聚四氢呋喃(简称AZO-PTHF)。该聚合物中的AZO基和通常低分子偶氮化合物一样可在受热时发生分解反应,生成大分子游离基,因此可作为高分子引发剂引发乙烯基单体聚合。ESR波谱分析表明,该聚合物在40°C左右热分解产生游离基。     

Assessment of Microwave Effect on Polymerization Conducted under ARGET ATRP Conditions

A comprehensive kinetic model based on the method of moments is developed for understanding the kinetics of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) under microwave irradiation. Both the experimental data and the simulation results show that the polymerization under microwave irradiation is much faster than the thermal polymerization. Simulation results indicate that the acceleration of polymerization can be attributed to the increase of propagation rate coefficient and the radical generation by microwave irradiation. Kinetic behaviors, such as the effect of catalyst concentration and initial initiator, are investigated in detail. Results show that the catalyst concentration has negligible influence on polymerization rate while the initiator concentration can affect both the molecular weight and the reaction rate. In conclusion, this work thoroughly investigates the kinetic mechanism of ARGET ATRP under microwave irradiation, providing both theoretic and experimental supports to improve the product property of polymer materials.     

Light‐induced controlled free radical polymerization of methacrylates using iron‐based photocatalyst in visible light

A novel visible light mediated catalytic system based on low cost iron complex, that is, Fe(bpy)₃(PF)₆ photocatalyst that initiates and control the free radical polymerization of methacrylates using ethyl α‐bromoisobutyrate (EBriB) as an initiator and 20 watt LED as light source is developed. The polymerization is initiated with turning the light on and immediately terminated by turning the light off. In addition, the molecular weight of polymer can be varied by changing the ratio of monomer and initiator. The merits of the present methodology lie in the use of low cost less precious, highly abundant iron‐based photocatalyst, avoidance of sacrificial donor and need of lower catalyst amount under visible light. The optimum amount of catalyst and initiator were established and successful polymerization of various methacrylates was achieved under the optimized polymerization conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2739–2746