Structure of zinc-borate low-melting glasses derived from IR spectroscopy data

The IR spectra of glasses of the ZnO—SrO—B₂O₃ system with constant additions of PbO, Al₂O₃, and Li₂O (20 mol. % in sum) were studied. It is established that on replacement of B₂O₃ by ZnO, the structure of the glasses is characterized by the presence of groupings with the bridge bonds B^III— O—B^III, B^III—O—B^IV, B^IV—O—B^IV and end groups B^III— O⁻; ZnO practically exerts no influence on the coordination transition [BO₃] → [BO₄]. At a high content of ZnO, zinc ions are present in both a six-and a four-coordinated state. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 6, pp. 778–781, November–December, 2005.     

Spectroscopic study of ZnO doped CeO2-PbO-B2O3 glasses

Glass samples of compositions xZnO-xCeO₂-(30−x)PbO-(70−x)B₂O₃ with x varying from 2% to 10% mole fraction are prepared by the melt quench technique. The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV-visible spectroscopic measurement techniques. The FTIR spectral analysis indicates that with the addition of ZnO contents in glass network, structural units of BO₃ are transformed into BO₄. It has been observed in our previous work that band gap decreases from 2.89 to 2.30 eV for CeO₂-PbO-B₂O₃ glasses with cerium content varying from 0% to 10% [Gurinder Pal Singh, Davinder Paul Singh, Physica B 406(3) (2011) 640-644]. With the incorporation of zinc in CeO₂-PbO-B₂O₃ glasses, the optical band gap energy decreases further from 2.38 to 2.03 eV. This causes more compaction of the borate network, which results in an increase of density (3.39-4.02 g/cm³). Transmittance shows that ZnO in glass samples acts as a reducing agent thathelps to convert Ce⁴⁺→Ce³⁺ ions.     

Charge order melting and magnetic transition in Nd0.5(1+x)Ca0.5(1−x)Mn(1−x)CrxO3 system

The magnetic property of double doped manganite Nd_0.5(1+x)Ca_0.5(1−x)Mn_(1−x)Cr_xO₃ with a fixed ratio of Mn³⁺:Mn⁴⁺=1:1 has been investigated. For the undoped sample, it undergoes one transition from charge disordering to charge ordering (CO) associated with paramagnetic (PM)-antiferromagnetic (AFM) phase transition at T<250 K. The long range AFM ordering seems to form at 35 K, rather than previously reported 150 K. At low temperature, an asymmetrical M-H hysteresis loop occurs due to weak AFM coupling. For the doped samples, the substitution of Cr³⁺ for Mn³⁺ ions causes the increase of magnetization and the rise of T_c. As the Cr³⁺ concentration increases, the CO domain gradually becomes smaller and the CO melting process emerges. At low temperature, the FM superexchange interaction between Mn³⁺ and Cr³⁺ ions causes a magnetic upturn, namely, the second FM phase transition.     

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3-δ

Crystal structure, thermogravimetry (TG), thermal expansion coefficient (TEC), electrical conductivity and AC impedance of (Ba_0.5Sr_0.5)_1-xLa_xCo_0.8Fe_0.2O_3-δ (BSLCF; 0.05?x?0.20) were studied in relation to their potential use as intermediate temperature solid oxide fuel cell (IT-SOFC) cathode. A single cubic pervoskite was observed by X-ray diffraction (XRD). The TEC of BSLCF was increasing slightly with the increasing content of La, and all the compounds showed abnormal expansion at high temperature. Proved by the TG result, it was associated with the loss of lattice oxygen. The electrical conductivity, which is the main defect of Ba_0.5Sr_0.5 Co_0.8Fe_0.2O_3-δ (BSCF), was improved by La doping, e.g., the compound of x=0.20 demonstrated a conductivity of σ=376 S cm⁻¹ at 392 °C. The increase of electrical conductivity resulted from the increased concentration of charge carrier induced by La doping. In addition, the AC impedance revealed the better electrochemical performance of BSLCF. For example, at 500 °C, the sample with composition x=0.15 yielded the resistance values of 2.12 Ω cm², which was only 46% of BSCF.     

Relaxor behavior in the (1−x)BaSnO3 - xPbTiO3 solid solution

The relaxor behavior was revealed in the solid solution (1−x)BaSnO₃-xPbTiO₃[(1−x)BSn-xPT] with compositions near x=0.50. The real permittivity (ε^′) and loss tangent (tanδ) exhibit diffuse and dispersive maxima, whose temperature shifts towards a higher temperature upon the increasing frequency. The frequency dependence of the temperature of the dielectric maximum (T_m) follows the Vogel-Fulcher law, as in the canonical relaxor. A deviation from the Curie-Weiss law was observed below the Burns temperature (T_B) and well above the Curie temperature (T_C). These phenomena are well consistent with typical relaxors, which explains the existence of the relaxor behavior in the (1−x)BSn-xPT solid solution.     

Bi2O3-B2O3-BaO玻璃的制备及其近红外发光性能的研究

采用高温熔融法制备了xBi₂O₃-50B₂O₃-(50-x)BaO玻璃, 测定了样品玻璃的近红外光区的发射谱、荧光寿命以及Raman光谱. 在808 nm波长光的激发下, 50Bi₂O₃-50B₂O₃二元玻璃中未观察到近红外发光; 随体系中BaO的加入, 当x为40, 45以及49时, 玻璃样品中观察到了近红外宽带发光现象; BaO含量进一步增加, 当x=10–30时, 近红外发光现象消失; 而当玻璃中Bi浓度很低时, 在0.5Bi₂O₃-50B₂O₃-50BaO及1Bi₂O₃-50B₂O₃-50BaO玻璃中发现了近红外发光现象, 且存在多个发光峰. 对铋离子近红外发光机理进行了初步的探讨.     

Conversion of covalent to ionic character of V2O5–CeO2–PbO–B2O3 glasses for solid state ionic devices

xV₂O₅–xCeO₂–(30−x)PbO–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. The number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.20 to 1.78 eV and density increases from 3.49 to 4.25 g/cm³. FTIR spectroscopy reveals that incorporation of V₂O₅ in glass network helps to convert the structural units of [BO₃] into [BO₄]. At higher concentration of vanadium, VO vibration of [VO₅] structural units and V–O–V vibration are present. The bond ionicity of glasses increases with incorporation of V₂O₅ contents.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Role of WO3 in structural and optical properties of WO3-Al2O3-PbO-B2O3 glasses

Glass samples of composition xAl₂O₃-20PbO-(80−x)B₂O₃ and xWO₃-xAl₂O₃-20PbO-(80−2x)B₂O₃ with x varying from 0% to 10% mole fraction are prepared by melt quench technique. The optical band gap decreases (from 3.21 to 2.37 eV) more for WO₃-Al₂O₃-PbO-B₂O₃ glasses with an addition of WO₃ content. The FTIR spectral studies have pointed out the conversion of structural units of BO₃ to BO₄ and WO₄ to WO₆ in these glasses. The increase in density from 4.51 to 5.80 g cm⁻³ for WO₃-Al₂O₃-PbO-B₂O₃ glasses is observed with an increase in WO₃ content. This is observed that the atomic structure changes more with the incorporation of WO₃. This is due to the formation of WO₆, WO₄ and BO₄ units.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.7A0.3(Mn1−xbx)O3 (A=Sr; B=Ti and Al; x=0.0 and 0.05) compounds

The critical parameters provide important information concerning the interaction mechanisms near the paramagnetic-to-ferromagnetic transition. In this paper, we present a thorough study for the critical behavior of La_0.7A_0.3(Mn_1−xB_x)O₃ (A=Sr; B=Ti and Al; x=0.0 and 0.05) polycrystalline samples near ferromagnetic-paramagnetic phase transition temperature by analyzing isothermal magnetization data. We have analyzed our dc-magnetization data near the transition temperature with the help of the modified Arrot plot, Kouvel-Fisher method. We have determined the critical temperature T_C and the critical parameters β, γ and δ. With the values of T_C, β and γ, we plot M×(1−T/T_C)^−β vs. H×(1−T/T_C)^−γ. All the data collapse on one of the two curves. This suggests that the data below and above T_C obey scaling, following a single equation of state. Critical parameters for x=0 and x_Ti=0.05 samples are between those predicted for a 3D-Heisenberg model and mean-field theory and for x_Al=0.05 samples the values obtained for the critical parameters are close to those predicted by the mean-field theory.     

Study of potassium-zinc borophosphate glasses

Potassium-zinc borophosphate glasses were prepared and studied in two compositional series xK₂O-(50−x)ZnO-10B₂O₃-40P₂O₅ and xK₂O-(50−x)ZnO-20B₂O₃-30P₂O₅ with x=0, 10, 20, 30, 40 and 50 mol% K₂O. The replacement of zinc by potassium decreases the density and increases the molar volume of these glasses, whereas glass transition temperature and chemical durability decrease with increasing potassium content. Structural changes were studied by ¹¹B and ³¹P MAS NMR and Raman spectroscopy. The observed changes in the spectra and the properties of the studied glasses can be ascribed to several reasons and namely to the differences in the space occupied by cations Zn²⁺ and 2K⁺, the differences in the electronegativity of zinc and potassium and a large difference in the field strength of Zn²⁺ and K⁺ cations and thus higher ionicity of K-O bonds in comparison with Zn-O bonds.     

Synthesis and characterization of a new monophosphate [2,5-(CH3)2C6H3NH3]H2PO4

Chemical preparation, calorimetric studies, crystal structure and spectroscopic investigations are given for a new noncentrosymmetric organic cation monophosphate [2,5-(CH₃)₂C₆H₃NH₃]H₂PO₄. This compound is orthorhombic P2₁2₁2₁ with the following unit-cell parameters: a=5.872(4), b=20.984(3), c=8.465(1) Å, Z=4, V=1043.0(5) Å³ and D_x=1.396 g cm⁻³. Crystal structure has been solved and refined to R=0.048 using 2526 independent reflections. Structure can be described as an inorganic layer parallel to (a,b) planes between which organic groups [2,5-(CH₃)₂C₆H₃NH₃]⁺ are located. Multiple hydrogen bonds connecting the different entities of compound thrust upon three-dimensional network a noncentrosymmetric configuration.     

Spin-glass-like behaviour and magnetic order in Mn[Cr0.5Ga1.5]S4 spinels

Magnetization and susceptibility were investigated as a function of temperature and magnetic field in polycrystalline Mn[Cr_0.5Ga_1.5]S₄ spinel. The dc susceptibility measurements at 919 Oe showed a disordered ferrimagnetic behaviour with a Curie-Weiss temperature θ_CW=−55 K and an effective magnetic moment of 5.96 μ_B close to the spin-only value of 6.52 μ_B for Cr³⁺ and Mn²⁺ ions in the 3d³ and 3d⁵ configurations, respectively. The magnetization measured at 100 Oe revealed the multiple magnetic transitions with a sharp maximum at the Néel temperature T_N=3.9 K, a minimum at the Yafet-Kittel temperature T_YK=5 K, a broad maximum at the freezing temperature T_f=7.9 K, and an inflection point at the Curie temperature T_C=48 K indicating a transition to paramagnetic phase. A large splitting between the zero-field-cooled (ZFC) and field-cooled (FC) magnetizations at a temperature smaller than T_C suggests the presence of spin-glass-like behaviour. This behaviour is considered in a framework of competing interactions between the antiferromagnetic ordering of the A(Mn) sublattice and the ferromagnetic ordering of the B(Cr) sublattice.     

The glassy state of the amorphous V2O5–NiO–TeO2 samples

The glass transition temperature dependence to heating rate and therefore the activation energy (ΔH^?) of the glass transition of (60-x)V₂O₅–xNiO–40TeO₂ oxide glasses with 0≤x≤20 (in mol%) were investigated at heating rates φ (=3 6, 9, 10 and 12 K/min) using differential scanning calorimetry (DSC). The heating rate dependence of T_g was used to investigate the applicability of different theoretical models describing the glass transition. Using the application of Moynihan and Kissinger et al. models to the present data, different values of (ΔH^?) at each different heating-rate regions were obtained. The fragility parameter (m=ΔH^?/R T_g) was ∼24.98 for x=10 mol%, suggesting that this glass may be considered as a rather strong glass (fragility index m∼>20 is an indication of fragile glass). Also the compositional dependence of T_g and ΔH^? was investigated.     

Role of copper ions in dielectric and structural investigations of lead– borate glasses

Glasses in the system 0.1CuO-(x-0.1)PbO-(1-x)B₂O₃ (0.3≤ x ≤ 0.7) were synthesized by using the melt quench technique. A number of studies such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), fourier-transform infrared (FTIR) and Raman spectroscopy, electron paramagnetic resonance (EPR) and dielectric properties (viz., dielectric constant ??, dielectric loss and ac conductivity σ_ac) are employed to characterize the glasses. The amorphous nature of the glasses was confirmed using XRD while the glass transition temperature (T_g) of glass samples have been estimated from DSC investigation and found that the T_g decreases with increasing PbO content. Raman and FTIR spectroscopy reveals that when increasing lead ions, the tetrahedral [BO₄] units are gradually replaced by trigonal [BO₃] units. The EPR study leads to determine the local site of Cu²⁺ ions and its transformation with the Pb content in the studied glasses.     

Structural, magnetotransport and morphological studies of Sb-doped La2/3Ba1/3MnO3 ceramic perovskites

We report here the structural, magnetotransport and morphological studies of Sb-doped La_2/3Ba_1/3Mn_1−xSb_xO₃ perovskite manganites. Pristine material La_2/3Ba_1/3MnO₃ (LBMO) shows two insulator-metal (I-M) transitions in the electrical resistivity-temperature (ρ-T) behavior. While the higher temperature transition (T_P1) at ∼340 K is reminiscent of the usual I-M transition in manganites, the lower temperature transition (T_P2) at ∼250 K has been ascribed to the grain boundary (GB) effects arising out of the ionic size mismatch between the ions present at the rare-earth site (La³⁺ and Ba²⁺). With Sb-doping T_P1 shifts to lower temperatures while T_P2 remains invariant up to 3% and shifts to lower temperature for 5%. Room temperature electrical resistivity and the peak values also increase successively with Sb-doping. Scanning electron micrographs of the samples exhibit a gradual increase in their grain sizes with Sb indicating a gradual decrease in the GB density. Shift of T_P1 with doping is explained on the basis of a competition between double-exchange and super-exchange mechanisms. The overall electrical resistivity increases and the shift in the electrical resistivity hump (T_P2) with Sb-doping is found related to be gradually decreasing GB density and the ensuing lattice strain increase at the GBs. The intrinsic magnetoresistance (MR) gets suppressed and extrinsic MR gets enhanced with Sb-doping. At T>T_P1, the electrical resistivity is found to follow the adiabatic polaron hopping model whereas the electron-magnon scattering is found to dominate in the metallic regime (T<T_P1).     

Low-field transport properties of (1−x)La0.7Ca0.2 Sr0.1MnO3+x(ZnO) composites

Composite samples (1−x)La_0.7Ca_0.2Sr_0.1MnO₃(LCSMO)+x(ZnO) with different ZnO doping levels x have been investigated systematically. The structure and morphology of the composites have been studied by the X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The XRD and SEM results indicate that no reaction occurs between LCSMO and ZnO grains, and that ZnO segregates mostly at the grain boundaries of LCSMO. The magnetic properties reveal that the ferromagnetic order of LCSMO is weakened by addition of ZnO. The results also show that ZnO has a direct effect on the resistance of LCSMO/ZnO composites, especially on the low-temperature resistance. With increase of the ZnO doping level, T_P shifts to a lower temperature and the resistance increases. It is interesting to note that an enhanced magnetoresisitance (MR) effect for the composites is found over a wide temperature range from low temperature to room temperature in an applied magnetic field of 3 kOe. The maximum MR appears at x=0.1. The low field magnetoresistance (LFMR) results from spin-polarized tunneling. However, around room temperature, the enhanced MR of the composites is caused by magnetic disorder.     

Structural investigation of xAg2O·(100−x)·[2B2O3·As2O3] glasses doped with manganese ions

Structural analysis of x[(100−y)Ag₂O·yMnO]·(100−x)[2B₂O₃·As₂O₃] glasses, with x=10 mol% and 0≤y≤10 mol%, was performed by means of FT-IR and FT-Raman spectroscopies. The purpose of this work is to investigate the structural changes that appear in the xAg₂O·(100−x)·[2B₂O₃·As₂O₃] glasses with the addition and increase in manganese ions content. FT-IR measurements revealed the presence of pyro-, ortho-, di-, tri-, tetra- and penta-borate groups and structural units characteristic to As₂O₃ in the structure of the studied glasses. FT-IR spectroscopy measurements also show that BO₃ units are the main structural units of the glass system. The presence of structural units characteristic to Ag₂O were not directly evidenced by FT-IR spectroscopy. In addtition, the FT-Raman analysis evidenced the presence of boroxol rings in the structure of the studied glasses.     

Carbon doping in MgB2: role of boron and carbon px(y) bands

We have studied the changes in the electronic structure and the superconducting transition temperature T_c of Mg(B_1−xC_x)₂ alloys as a function of x with 0≤x≤0.3. Our density-functional-based approach uses the coherent-potential approximation to describe the effects of disorder, the Gaspari-Gyorffy formalism to estimate the electron-phonon matrix elements and the Allen-Dynes equation to calculate T_c in these alloys. We find that the changes in the electronic structure of Mg(B_1−xC_x)₂ alloys, especially near the Fermi energy E_F, come mainly from the outward movement of E_F with increasing x, and the effects of disorder in the B plane are small. In particular, our results show a sharp decline in both B and C p_x(y) states for 0.2≤x≤0.3. Our calculated variation in T_c of Mg(B_1−xC_x)₂ alloys is in qualitative agreement with the experiments.