Mössbauer study of CoFeRhO4

CoFeRhO₄ has been studied by Mössbauer spectroscopy and X-ray diffraction. The crystal is found to have a cubic spinel structure with the lattice constant a₀=8.451±0.005 Å. The iron ions are in ferric states. The temperature dependence of the magnetic hyperfine field is analyzed by the Néel theory of ferrimagnetism. The intersublattice superexchange interaction is antiferromagnetic and strong with a strength of J_AB=−12.39k_B while the intrasublattice superexchange interactions are weak with strengths of J_AA=−4.96k_B and J_BB=6.20k_B. As the temperature increases toward the Néel temperature T_N, a systematic line broadening effect in the Mössbauer spectrum is observed and interpreted to originate from different temperature dependences of the magnetic hyperfine fields at various iron sites.     

Mössbauer spectroscopic study of the thermal spin crossover in [Fe(II)(isoxazole)6](ClO4)2

The ⁵⁷Fe Mössbauer spectroscopy of mononuclear [Fe(II)(isoxazole)₆](ClO₄)₂ has been studied to reveal the thermal spin crossover of Fe(II) between low-spin (S=0) and high-spin (S=2) states. Temperature-dependent spin transition curves have been constructed with the least-square fitted data obtained from the Mössbauer spectra measured at various temperatures between 84 and 270 K during a cooling and heating cycle. This compound exhibits an unusual temperature-dependent spin transition behaviour with T_C(↓)=223 and T_C(↑)=213 K occurring in the reverse order in comparison to those observed in SQUID observation and many other spin transition compounds. The compound has three high-spin Fe(II) sites at the highest temperature of study of which two undergo spin transitions. The compound seems to undergo a structural phase transition around the spin transition temperature, which plays a significant role in the spin crossover behaviour as well as the magnetic properties of the compound at temperatures below T_C. The present study reveals an increase in high-spin fraction upon heating in the temperature range below T_C, and an explanation is provided.     

Mössbauer study of Zn0.4Cu0.6Fe1.2Cr0.8O4

Zn_0.4Cu_0.6Fe_1.2Cr_0.8O₄ has been studied by Mössbauer spectroscopy, SQUID magnetometry, and X-ray diffraction. The crystal is found to have a cubic spinel structure with the lattice constant The iron ions are in ferric states and occupy both the tetrahedral (A) and octahedral (B) sites; the fractions of the iron ions at the A-sites and B-sites are 0.52 and 0.34, respectively. While spin orderings are collinear at higher temperatures, spin canting begins to appear around 25 K and increases with decreasing temperature; the canting angle at 4.7 K reaches up to 27°. Debye temperatures of the tetrahedral and octahedral sites are determined to be 339 and 335 K, respectively.     

Structural studies of nanocrystalline SnO2 doped with antimony: XRD and Mössbauer spectroscopy

A series of Sb-doped SnO₂ samples, with doping levels 0, 3.1, 6.2, 11.9 and 14.0 at% Sb, has been hydrothermally prepared and characterized by X-ray powder diffraction. Diffraction lines were broadened, the line broadening being anisotropic. Both the line broadening and line anisotropy were dependent on the Sb doping level. The samples are tetragonal, space group P4₂/mnm and isostructural with TiO₂(rutile). Sb doping of SnO₂ causes the increase of unit-cell parameters. The structure of pure SnO₂ and of samples containing 6.2 and 11.9 at% Sb has been refined by the Rietveld method. Crystal structure indicated that both Sb³⁺ and Sb⁵⁺ are substituted for Sn⁴⁺ in the SnO₂ structure, Sb³⁺ being dominant for the investigated doped samples. The samples were also examined by ¹¹⁹Sn- and ¹²¹Sb-Mössbauer spectroscopy. Mössbauer spectroscopy confirmed the XRD results. Also, the values of the isomer shifts and quadrupole coupling constants indicated that the configuration around the Sb³⁺ site includes the presence of the stereochemically active lone pair electrons.     

Mössbauer spectroscopic studies of the disintegration of hexavalent iron compounds (BaFeO4 and K2FeO4)

Mössbauer spectroscopic studies of BaFeO₄ and K₂FeO₄ as prepared, then either sealed, or exposed to air, or exposed to moist air for a period up to more than one year, were performed at room temperature as a function of time. Some of the samples were studied as a function of temperature down to 4.2 K. K₂FeO₄ and BaFeO₄ after preparation, exhibit a pure Fe⁶⁺ spectrum. K₂FeO₄ shows low stability. After a period of 14 months in a sealed sample holder, the spectrum exhibits 83% noncrystalline Fe³⁺, as Fe₂O₃ nanoparticles, and only 17% of the original Fe⁶⁺. BaFeO₄ sealed, or exposed to dry air disintegrates slowly, exhibiting a spectrum composed of three subspectra. In addition to the original Fe⁶⁺ and final Fe³⁺ subspectra, a subspectrum, of an intermediate stage of a crystalline Fe⁴⁺ system, is present. In the first month the increase of the Fe³⁺ subspectrum is 15%, and that of the Fe⁴⁺ is 8%. BaFeO₄ exposed to moist air, disintegrates at a very fast rate. The Fe³⁺ subspectrum, due to Fe₂O₃ nanoparticles, increases in the first days at the rapid rate of ∼13%/day, and there is no evidence for Fe⁴⁺ in the spectrum. The Fe⁶⁺ in BaFeO₄, Fe³⁺ and Fe⁴⁺ in the disintegrated systems are all magnetically ordered at 4.2 K. Above 90 K the Fe³⁺ subspectra exhibit a superposition of a paramagnetic doublet and a diffuse magnetic sextet, with relative intensities changing with temperature, and changing from sample to sample according to their blocking temperatures, which are determined by the distribution in size of the nanoparticles.     

Spectroscopic and magnetic properties of Fe3Fe4(AsO4)6

The infrared (IR) and ⁵⁷Fe-Mössbauer spectra of Fe₃^IIFe₄^III(AsO₄)₆ were recorded and analyzed on the basis of its structural characteristics. The IR spectrum presents a high complexity, showing an important number of bands and splittings, as a consequence of the presence of three structurally independent AsO₄³⁻ groups. The analysis of the four quadrupole signals shown by the Mössbauer spectrum allowed to attain a detailed insight into the cation distribution over the available crystallographic sites. The alternating current susceptibility measurements indicate a paramagnetic to ferrimagnetic transition in the material at about 59 K.     

BiFeO3 ceramic matrix with Bi2O3 or PbO added: Mössbauer, Raman and dielectric spectroscopy studies

In this paper Mössbauer, Raman and dielectric spectroscopy studies of BiFeO₃ (BFO) ceramic matrix with 3 or 10 wt% of Bi₂O₃ or PbO added, obtained through a new procedure based on the solid-state method, are presented. Mössbauer spectroscopy shows the presence of a single magnetically ordered phase with a hyperfine magnetic field of 50 T. Raman spectra of BFO over the frequency range of 100-900 cm⁻¹ have been investigated, at room temperature, under the excitation of 632.8 nm wavelength in order to evaluate the effect of additives on the structure of the ceramic matrix. Detailed studies of the dielectric properties of BiFeO₃ ceramic matrix like capacitance (C), dielectric permittivity (ε) and dielectric loss (tan δ), were investigated in a wide frequency range (1 Hz-1 MHz), and in a temperature range (303-373 K). The complex impedance spectroscopy (CIS) technique, showed that these properties are strongly dependent on frequency, temperature and on the added level of impurity. The temperature coefficient of capacitance (TCC) of the samples was also evaluated. The study of the imaginary impedance (−Z″) and imaginary electric modulus (M″) as functions of frequency and temperature leads to the measurement of the activation energy (E_ac), which is directly linked to the relaxation process associated with the interfacial polarization effect in these samples.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Redox reactions of K3[Fe(CN)6] during mechanochemically stimulated phase transitions of AlOOH

Thermally induced redox reactions of K₃[Fe(CN)₆] (1) were investigated for a broad temperature range by thermal methods and structure analytical methods (ESR and Mößbauer spectroscopy, X-ray Powder diffraction and XANES). Based on the influence of the mechanically activated and transforming matrices 2 and 3, redox processes can be tuned to form doped Al₂O₃ systems which contain either isolated Fe³⁺ centres or redox active phases and precursors like (Al_1−xFe_x)₂O₃ (4), (Al_3−xFe_x)O₄ (5), Fe₃O₄, Fe₂O₃ and Fe⁰. The phase Fe₃C and the chemically reactive C-species were detected during the reaction of 1. The final composition of the doped products of α-Al₂O₃ is mainly influenced by the chemical nature of the Fe doping component, the applied temperature and time regime, and the composition of the gas phase (N₂, N₂/O₂ or N₂/H₂). From the solid state chemistry point of view it is interesting that the transforming matrix (2 and 3) possesses both oxidative and protective properties and that the incorporation of the Fe species can be performed systematically.     

Intermediate-temperature polymorphic phase transition in KH2PO4: A synchrotron X-ray diffraction study

We have used synchrotron X-ray diffraction to investigate the structural and chemical changes undergone by polycrystalline KH₂PO₄ (KDP) upon heating within the 30-250 °C temperature interval. Our data show evidence of a polymorphic transition at T∼190 °C from the room-temperature tetragonal KDP phase to a new intermediate-temperature monoclinic KDP modification (spacegroup P2₁/m and lattice parameters a=7.590, b=6.209, c=4.530 Å, and β=107.36°). The monoclinic RDP polymorph remains stable upon further heating to 235 °C, and is isomorphic to its RbH₂PO₄ and CsH₂PO₄ counterparts.     

Spin excitations in a K0.84Fe1.99Se2 superconductor as studied by Mössbauer spectroscopy

Mössbauer spectroscopy was used to probe the site-specific information of a K_0.84Fe_1.99Se₂ superconductor. A spin excitation gap, ΔE ≈5.5 meV, is observed by analyzing the temperature dependence of the hyperfine magnetic field (HMF) at the iron site within the spin wave theory. Using the simple model suggested in the literature, the temperature dependence of the HMF is well reproduced, suggesting that, below room temperature, the alkali metal intercalated iron-selenide superconductors can be regarded as ferromagnetically coupled spin blocks that interact with each other antiferromagnetically to form the observed checkerboard-like magnetic structure.     

A new isomorph of ferrous chloride tetrahydrate: A Fe Mössbauer and X-ray crystallography study

This paper outlines the discovery of a newly characterised isomorph of ferrous chloride tetrahydrate, Fe(H₂O)₆·FeCl₄(H₂O)₂, which was initially identified by X-ray crystallography and confirmed by Mössbauer spectroscopy. The X-ray analysis identified the space group as P2₁/c with essentially the same unit cell dimensions as the well-known isomorph, FeCl₂·4H₂O, except that one edge is doubled due to two discrete [Fe(H₂O)₆]²⁺ and [FeCl₄(H₂O)₂]²⁻ species per unit cell. Time-series Mössbauer studies revealed this new isomorph to be unstable upon atmospheric exposure, decaying to the well-known structure over a period of days. Density functional theory calculations support an energetically favourable catalytic interconversion involving adsorbed water. A high-precision redetermination on the FeCl₂·4H₂O crystal structure, which is also in space group P2₁/c, is also reported, providing the unit cell parameters: a=5.8765(3) Å, b=7.1100(3) Å, c=8.4892(5) Å and β=111.096(1)°.     

α-Fe2O3-In2O3 mixed oxide nanoparticles synthesized under hydrothermal supercritical conditions

α-Fe₂O₃-In₂O₃ mixed oxide nanoparticles system has been synthesized by hydrothermal supercritical and postannealing route, starting with (1−x)Fe(NO₃)₃·9H₂O·xIn(NO₃)₃·5H₂O aqueous solution (x=0-1). X-ray diffraction and Mössbauer spectroscopy have been used to study the phase structure and substitutions in the nanosized samples. The concentration regions for the existence of the solid solutions in the α-Fe₂O₃-In₂O₃ nanoparticle system together with the solubility limits of In³⁺ ions in the hematite lattice and of Fe³⁺ ions in the cubic In₂O₃ structure have been evidenced. In general, the substitution level is considerably lower than the nominal concentration x. A justification of the processes leading to the formation of iron and indium phases in the investigated supercritical hydrothermal system has been given.     

Vibrational and Fe-Mössbauer spectra of LaFeGe2O7 and NdFeGe2O7

The infrared, Raman and ⁵⁷Fe-Mössbauer spectra of LaFeGe₂O₇ and NdFeGe₂O₇ were recorded and analysed on the basis of their structural characteristics. Some comparisons with the stoichiometrically related materials containing the heavier lanthanides are made, showing that it is possible to differentiate spectroscopically both groups of materials. The Mössbauer parameters clearly reflect the small structural differences in the FeO₅-polyhedra present in these compounds.     

Synthesis of high tap density Li3V2(PO4)3 cathode materials using mixed lithium precursors

High tap density Li₃V₂(PO₄)₃ cathode materials were synthesized using mixed LiF and LiNO₃ as lithium precursors, LiNO₃ was used as the sintering agent. Rietveld refinement results show that no impurities phases are detected in products. Particle size distribution and tap density measurement results show that particle size and tap density of products can be increased by the addition of LiNO₃. Electrochemical characterization results show that electrochemical performance of products is declined with the increase in contents of LiNO₃ in the lithium precursors. Only a small amount of LiNO₃ added in the lithium precursors (mole ratio of LiNO₃ to LiF is 1:9) can increase the tap density and also retain the good performance of products. Scanning electron microscopy (SEM) images indicate that the samples prepared by mixed lithium precursors present particles agglomerate, and the particle size increased with increase in contents of LiNO₃. Large amount of LiNO₃ added in the lithium precursors induces the particles to become spheric and smooth, which worsens the performance. The particles obtained with the mole ratio of LiNO₃ to LiF in 1:9 show a flake-like shape with a high specific surface area, which leads to good electrochemical performance.     

Structural and luminescence characterization of synthetic Cr-doped Ni3(PO4)2

Ni_3–xCr_2x/3(PO₄)₂ (x=0 and 0.02) microcrystalline powders were obtained as single phases via a modified sol–gel Pechini-type in situ polymerizable complex method. The samples were characterized using scanning electron microscopy, X-ray diffraction, cathodoluminescence (CL), and thermoluminescence (TL) techniques. We found that Cr³⁺ doping modified the average particle and distribution. The mean particle size was 0.441 μm for Ni₃(PO₄)₂ and 0.267 μm for Ni_2.98Cr_0.013(PO₄)₂. The results also reveal that Cr³⁺ doping notably enhanced the CL and TL UV-blue emission.     

Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route

NiFe₂O₄/NiO nanocomposite thin films have been successfully prepared through a facile route using nickel iron layered double hydroxide (NiFe-LDH) as a single-source precursor. This synthetic approach mainly involves the formation of NiFe-LDH film by casting the slurry of NiFe-LDH precursor on the α-Al₂O₃ substrate, followed by high-temperature calcination. The composition, microstructure and properties of the films were characterized in detail by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and vibrating sample magnetometer (VSM). The results indicate that NiFe₂O₄/NiO composite film was composed of granules with diameter less than 100 nm, and the thickness of the film was in the range 1-2 μm. The magnetization of the film can be tuned by alternating the Ni/Fe molar ratio of LDH precursor. In addition, the method developed should be easily extended to fabricate other MFe₂O₄/MO composite film systems with specific applications just by an appropriate combination of divalent/trivalent composition in the precursor of LDHs.     

Hyperfine interactions in metal extracted from ordinary chondrite Tsarev L5: A study using Mössbauer spectroscopy with high-velocity resolution

For the first time, a study of hyperfine interactions in metal grains extracted from ordinary chondrite Tsarev L5 was done using Mössbauer spectroscopy with high-velocity resolution. Three magnetic (sextets) and one paramagnetic (singlet) components were revealed in the Mössbauer spectrum of extracted metal. The evaluated values of the magnetic hyperfine field were 332.5, 335.4 and 347.2 kOe. On the basis of Mössbauer parameters and metallographic data, the magnetic components were related to the α-Fe(Ni, Co), α′-Fe(Ni, Co) and α₂-Fe(Ni, Co) phases of Fe(Ni, Co) alloy, while the paramagnetic singlet was related to the γ-Fe(Ni, Co) phase.     

Advanced electrochemical performance of LiMn1.4Cr0.2Ni0.4O4 as 5 V cathode material by citric-acid-assisted method

Spinel LiMn₂O₄ and LiMn_1.4Cr_0.2Ni_0.4O₄ cathode materials were successfully synthesized by the citric-acid-assisted sol-gel method with ultrasonic irradiation stirring. The structure and electrochemical performance of the as-prepared powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometer, cyclic voltamogram (CV) and the galvanostatic charge-discharge test in detail. XRD shows that all the samples have high phase purity, and the powders are well crystallized. SEM exhibits that LiMn_1.4Cr_0.2Ni_0.4O₄ has more uniform cubic-structure morphology than that of LiMn₂O₄. EDX reveals that a small amount of Mn³⁺ still exists in LiMn_1.4Cr_0.2Ni_0.4O₄. The galvanostatic charge-discharge test indicates that the initial discharge capacities for the LiMn_1.4Cr_0.2Ni_0.4O₄ and LiMn₂O₄ at 0.15 C discharge rates are 130.8 and 130.2 mAh g⁻¹, respectively. After 50 cycles, their capacity are 94.1% and 85.1%, respectively. The CV curve implies that Ni and Cr dual substitutions are beneficial to the reversible intercalation and deintercalation of Li⁺, and suppress Mn³⁺ generation at high temperatures and provide improved structural stability.     

Temperature-dependent Fe Mössbauer spectroscopy and local structure of the mullite-type Bi2(FexGa1−x)4O9 (0.1≤x≤1) solid solution

The Bi₂(Fe_xGa_1−x)₄O₉ oxide solid solution possessing a mullite-type structure has been investigated by ⁵⁷Fe Mössbauer spectroscopy in dependence of composition (0.1≤x≤1) and temperature (293≤T/K≤1073). The spectra have been fitted with two doublets for tetrahedrally and octahedrally coordinated high-spin Fe³⁺ ions, respectively. The experimental areas of the subspectra were used to determine the distribution of iron on the two inequivalent structural sites. The fraction of iron cations occupying the octahedral site is found to increase with decreasing Fe content and the cation distribution is almost independent of temperature. The unusual temperature dependence of the quadrupolar splitting, QS, observed for the octahedral site with dQS/dT>0 is discussed in connexion with structural data for Bi₂Fe₄O₉. The temperature dependence of Mössbauer isomer shifts and signal intensities is examined in the context of local vibrational properties of iron on the two inequivalent sites of the mullite-type lattice structure.