Structure, wrinkling, and reversibility of Langmuir monolayers of gold nanoparticles

The assembly of nanoparticles into large, two-dimensional structures provides a route for the exploration of collective phenomena among mesoscopic building blocks. We characterize the structure of Langmuir monolayers of dodecanethiol-ligated gold nanoparticles with in situ optical microscopy and X-ray scattering. The interparticle spacing increases with thiol concentration and does not depend on surface pressure. The correlation lengths of the Langmuir monolayer crystalline domains are on the order of five to six particle diameters. Further compression of the monolayers causes wrinkling; however, we find that wrinkled monolayers with excess thiol can relax to an unwrinkled state following a reduction of surface pressure. A theoretical model based on van der Waals attraction and tunable steric repulsion is adopted to explain this reversibility.     

The tuneable complexation of gold nanoparticles

Mixed monolayer protected gold nanoparticles have been fabricated incorporating 1,5-dialkyloxynaphthalene moieties that are capable of forming complexes with the tetracationic cyclophane cyclobis(paraquat-p-phenylene); electrochemical reduction of the cyclophane or the addition of tetrathiafulvalene results in disassembly of the complexes.     

Features of the complexation of octadecane-2,4-dione and lanthanide ions in Langmuir monolayers

Monolayers of octadecane-2,4-dione on the surfaces of EuCl₃ and TbCl₃ solutions in the concentration range of 1 × 10^–4 to 5 × 10^–3 M at pH 5.8 are studied. It is found that the limiting area of octadecane-2,4-dione molecule in a monolayer dependence on Eu³⁺ and Tb³⁺ concentration is of extreme nature. The formation of complex compounds in the ligand monolayer is postulated, and structures are proposed for these compounds at different concentrations of metal ions.     

Langmuir monolayers of Co nanoparticles and their patterning by microcontact printing

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.     

One-step synthesis of monodisperse silver nanoparticles beneath vitamin E Langmuir monolayers

The monodisperse silver nanoparticles were synthesized by one-step reduction of silver ions in the alkaline subphase beneath vitamin E (VE) Langmuir monolayers. The monolayers and silver nanocomposite LB films were characterized by surface pressure-area (pi-A) isotherms, transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), selected area electron diffraction (SAED), Fourier transform infrared transmission spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the limiting area/VE molecule on different subphases varied. The phenolic groups in the VE molecules were converted to a quinone structure, and the silver ions were mainly reduced to ellipsoidal and spherical nanoparticles. The arrangement of the nanoparticles changed from sparseness to compactness with reaction time. The electron diffraction pattern indicated that the silver nanoparticles were face-centered cubic (fcc) polycrystalline. Silver nanocomposite LB films with excellent quality could be formed on different substrates, indicating that the transfer ratio of monolayer containing silver nanoparticles is close to unity. The dynamic process of reduction of silver ions by VE LB films was also studied through monitoring the conductivity of an Ag2SO4 alkaline solution.     

The complexation mode of metal ions with Langmuir monolayers of nitrogen-containing flavonoid glycoside-based surfactants derived from rutin

The nanofibrillar feature of native type I collagen is of great importance in maintaining its functions in vivo. In the field of engineering collagen-based materials in vitro, different fabrications may yield differences in collagen organization and thus affect the nanofibrous structure. Two approaches of fabricating collagen-chitosan (Col-Chi) scaffolds were presented in this study to investigate the respective impacts especially on nanostructures. Compared with glutaraldehyde cross-linking fabrications, thermally triggered cofibrillogenesis showed a preferred capability in fabricating favorable porous scaffolds and preserving uniform and orderly assembled nanofibrils. A detailed kinetic study of the cofibrillogenesis in thermally triggered approach was then carried out to reveal the possible factors affecting the final fibrillar structures. Zeta potential measurements in different Col-Chi blends with varying Chi/Col ratios indicated the influences of electrostatic interactions on the subsequent cofibrillogenesis process. The native D-periodicity of ～64 nm was found on collagen fibrils in the presence of different amounts of chitosan by atomic force microscopy observation. The relevance of nanofibrillar structures to the overall performances of Col-Chi scaffolds was also revealed by assessing swelling behaviors and tensile measurements. The maximum tensile strength obtained in the thermally triggered scaffolds was up to ～361.2 ± 32.3 kPa, emphasizing the significance of preserving biomimetic nanofibrillar structures in reconstruction of Col-Chi scaffolds.     

Flow-induced patterning of Langmuir monolayers

Insoluble monolayers on water have been patterned at the macroscopic scale (i.e., at the centimeter scale of the flow apparatus) as well as the mesoscopic scale (i.e., down to the micron scale resolvable via optical microscopy). The macroscopic patterning at the air/water interface results from a hydrodynamic instability leading to a steadily precessing flow pattern. The velocity field is measured, and the associated shear stress at the interface is shown to be locally amplified by the flow pattern. The resulting hydrodynamic effects on two different monolayer systems are explored: (1) the pattern in a model monolayer consisting of micron-size, surface-bound particles is visualized to show that the particles are concentrated into isolated regions of converging flow with high shear, and (2) Brewster angle microscopy of a Langmuir monolayer (vitamin K1) shows not only that the monolayer is patterned at the macroscopic scale but also that the localized high-shear flow further patterns the monolayer at the mesoscale.     

Langmuir monolayers of bent-core molecules

A systematic study of five different, symmetric bent-core liquid crystals in Langmuir thin films at the air/water interface is presented. Both the end chains (siloxane vs hydrocarbon) and the core (more or less amphiphilic) are varied, to allow an exploration of different possible layer structures at the interface. The characterization includes systematic surface pressure isotherms, Brewster angle microscopy, and surface potential measurements. The properties of these layers are strongly dependent on the individual type of molecule: the molecules with amphiphilic end chains lie quite flat on the surface, while the molecules with hydrophobic end chains construct multilayer structures. In both cases, the three-dimensional collapse structure is reversible.     

Pressure-area relations for Langmuir monolayers

Pressure-area relations are derived for quasi-static compression of a Langmuir monolayer in the regimes of expanded and partially compressed chains. A monolayer is treated as an ensemble of flexible chains anchored at a flat water-air interface. Formation of surface pressure is attributed to excluded-volume interactions between segments of hydrophobic tail-groups. Close-form expressions are derived for the energy of interactions. Based on this relations, strength of excluded-volume interactions is evaluated by fitting pressure-area isotherms on stearic, behenic and pentacosadiynoic acids. It is found that the dimensionless strength of excluded-volume interactions is weakly affected by chain length and its value is close to .     

Phase transition in Langmuir monolayers

The main features of several theoretical models which describe the main phase transition and correspondingly the non-horizontal shape of the Π-A isotherms of the Langmuir monolayers, are discussed. New equations of state are based on the generalised Volmer's equation and consider the coexistence monomers and large clusters as bimodal distribution. A further generalisation for the case of quasi-bimodal distribution allows the consideration of monomers with small aggregates on one side of the spectrum and large clusters on the other side. The new theoretical model is corroborated by the Π-A isotherms of various amphiphilic monolayers the condensed phases of which have various gradual differences in the crystalinity and packing density data. The large variety of shapes of the Π-A isotherms in the region A<A_c can be determined by a single general equation whose parameters, except A_c, correspond to the isotropic fluid-like monolayer region. The application of the generalised equation of state on the experimental Π-A isotherms indicates the formation of small aggregates in the region A>A_c.     

Light-induced inhibition of chymotrypsin using photocleavable monolayers on gold nanoparticles

Positively charged gold nanoparticles featuring photocleavable units within their surrounding monolayer are switched from non-interacting species to inhibitors of chymotrypsin through UV irradiation.     

Adsorption of carboxylate-modified gold nanoparticles on an octadecylamine monolayer at the air/liquid interface

Gold nanoparticles (Au NPs) were prepared and surface-modified by mercaptosuccinic acid (MSA) to render a surface with carboxylic acid groups (MSA-Au). Octadecylamine (ODA) was used as a template monolayer to adsorb the Au NPs dispersed in the subphase. The effect of MSA concentration on the incorporation of Au NPs on the ODA monolayer and the relevant behavior of the mixed monolayer were studied using the pressure-area (pi-A) isotherm and transmission electron microscopy (TEM) observations. The experimental results showed that the adsorbed density of Au NPs is low without the surface modification by MSA. When MSA was added into the Au NP-containing subphase, the incorporation amount of Au NPs increased with increasing MSA concentration up to approximately 1 x 10-5 M for the particle density of 1.3 x 1011 particles/mL. With a further increase in the MSA concentration, the adsorbed particle density decreases due to competitive adsorption between the free MSA molecules and the MSA-Au NPs. It is inferred that free MSA molecules adsorb more easily than the MSA-Au NPs on the ODA monolayer. Therefore, an excess amount of MSA present in the subphase is detrimental to the incorporation of gold particles. The study on the monolayer behavior also shows that the pi-A isotherm of the ODA monolayer shifts right when small amounts of Au NPs or free MSA molecules are incorporated. However, when larger amounts of particles are adsorbed at the air/liquid interface, a left shift of the pi-A isotherm appears, probably due to the adsorption of ODA molecules onto the particle surface and the transferring of the particles from beneath the ODA monolayer to the air/water interface. According to the present method, it is possible to prepare uniform particulate films of controlled densities by controlling the particle concentration in the subphase, the MSA concentration, and the surface pressure of a mixed monolayer.     

Langmuir-Blodgett monolayers of gold nanoparticles with amphiphilic shells from V-shaped binary polymer arms

Gold nanoparticles functionalized with amphiphilic polybutadiene-poly(ethylene glycol) (PB-PEG) V-shaped arms formed stable Langmuir monolayers at the air-water and the air-solid interfaces. At these interfaces, the binary arms vertically segregated into a dense polymer corona, which surrounded the gold nanoparticles, preventing their large-scale agglomeration and keeping individual nanoparticles well-separated from each other and forming flattened, pancake nanostructures. The presence of both PEG and PB chains in the close proximity to the gold core was confirmed by surface enhanced Raman spectroscopy, whereas the AFM phase contrast images revealed the presence of 2 nm gold cores surrounded by the polymer shell with the diameter of 11 nm. We suggest that the amphiphilic shell drives their spontaneous organization into discrete 2D pancake-like hybrid structures that measured up to 10 microm in diameter and had a high packing density of gold clusters.     

Langmuir monolayers from perfluorobutyl-n-eicosane

Perfluorobutyl-n-eicosane (abbreviated as F4H20) was spread at the air/water as Langmuir monolayers and studied under different experimental conditions, such as spreading volume, subphase temperature and compression speed. The Langmuir monolayer experiments (π-A isotherms) have been complemented with Brewster angle microscopy results, which enabled direct visualization of the monolayers’ structure and estimation of the film thickness at different stages of compression. It has been found that the molecules are oriented almost vertically (with respect to the interface) in the vicinity of film collapse. The negative sign of the measured surface potential, ΔV, is evidence for the orientation of F4H20 molecules with their perfluorinated parts exposed towards the air. In the case of F4H20 a limited fluorination relative to perfluoroeicosane also results in monolayer formation, in contrast to eicosane itself, which forms lenses.     

The structure of gold nanoparticles and Au based thiol self-organized monolayers

Spatial and electronic structure of gold nanoparticles (AuNPs) and AuNPs with thiol base self-assambled monolayers (SAMs) are reviewed. Theoretical and experimental data on the symmetry, bond lengths, band gaps and binding energies are presented. Coordination of sulfur and its compounds to Au structures and AuS bond length emphasized especially. The works on synthesis of thiol based SAMs on AuNPs are reviewed. The applications of EXAFS and photoelectron spectroscopy for the investigated SAMs on AuNPs are considered.     

Langmuir monolayers as unique physical models

Physico-chemical processes at air/liquid interfaces are of paramount importance in nature. The Langmuir technique offers the possibility of forming a well-defined monolayer of amphiphilic molecules under study at the air/liquid interface, with a unique control of the area per molecule and other experimental conditions. Despite being a traditional technique in Colloid and Interface science, there is an ever growing interest in Langmuir studies. Herein, recent developing fields of research currently taking advantage of the Langmuir technique are reviewed, comprising the interfacial structure of: water, biomolecules and inorganic/organic hybrids. The good state of the Langmuir technique at present and the foreseeable increase of its usage are discussed.     

Reactive capture of gold nanoparticles by strongly physisorbed monolayers on graphite

Anthracene Diels Alder adducts (DAa) bearing two long side chains (H-(CH₂)₂₂O(CH₂)₆OCH₂-) at the 1- and 5-positions form self-assembled monolayers (SAMs) at the phenyloctane - highly oriented pyrolytic graphite (HOPG) interface. The long DAa side chains promote strong physisorption of the monolayer to HOPG and maintain the monolayer morphology upon rinsing or incubation in ethanol and air-drying of the substrate. Incorporating a carboxylic acid group on the DAa core enables capture of 1-4 nm diameter gold nanoparticles (AuNPs) provided (i) the monolayer containing DAa-carboxylic acids is treated with Cu²⁺ ions and (ii) the organic coating on the AuNP contains carboxylic acids (11-mercaptoundecanoic acid, MUA-AuNP). AuNP capture by the monolayer proceeds with formation of Cu²⁺ - carboxylate coordination complexes. The captured AuNP appear as mono- and multi-layered clusters at high coverage on HOPG. The surface density of the captured AuNPs can be adjusted from AuNP multi-layers to isolated AuNPs by varying incubation times, MUA-AuNP concentration, the number density of carboxylic acids in the monolayer, the number of MUA per AuNP, and post-incubation treatments.     

Modern physicochemical research on Langmuir monolayers

Recent developments in characterising Langmuir monolayers of a variety of film-forming materials and employing several physicochemical techniques are reviewed. The extension of the LB method to non-amphiphilic substances, especially macromolecular systems, has increased the need of a thorough understanding of Langmuir film properties, which requires characterising techniques that provide complementary information. Since there is vast literature in the subject, only selected examples are given of results that illustrate the potential of the techniques discussed.     

Microelectrodes with gold nanoparticles and self-assembled monolayers for in vivo recording of striatal dopamine

Electrochemical determination of in vivo dopamine (DA) using implantable microelectrodes is essential for monitoring the DA depletion of an animal model of Parkinson's disease (PD), but faces substantial interference from ascorbic acid (AA) in the brain area due to similar electroactive characteristics. This study utilizes gold nanoparticles (Au-NPs) and self-assembled monolayers (SAMs) to modify platinum microelectrodes for improving sensitivity and specificity to DA and alleviating AA interference. With appropriate choice of ω-mercaptoalkane carboxylic acid chain length, our results show that a platinum microelectrode coated with Au-NPs and 3-mercaptopropionic acid (MPA) has approximately an 881-fold specificity to AA. During amperometric measurements, Au-NP/MPA reveals that the responsive current is linearly dependent on DA over the range of 0.01-5 μM with a correlation coefficient of 0.99 and the sensitivity is 2.7-fold that of a conventional Nafion-coated electrode. Other important features observed include fast response time (below 2 s), resistance to albumin adhesion and low detection limit (7 nM) at a signal to noise ratio of 3. Feasibility of in vivo DA recording with the modified microelectrodes is verified by real-time monitoring of electrically stimulated DA release in the striatum of anesthetized rats with various stimulation parameters and administration of a DA uptake inhibitor. The developed microelectrodes present an attractive alternative to the traditional options for continuous electrochemical in vivo DA monitoring.     

Adsorption of DNA to octadecylamine monolayers at the air-water interface

In this work, surface properties of octadecylamine (ODA) monolayers in the presence of different concentrations of calf thymus DNA in the aqueous subphase covering a range of 2-8μM have been investigated. The increase of DNA concentration is accompanied by a marked increment in the expansion of the corresponding isotherms. In addition, there is a change in the profile of the isotherms ranging from an abrupt liquid-solid transition for the lipid monolayer on pure water to a slow condensation of the monolayer in a liquid state when DNA is added to the subphase, demonstrating the effective adsorption of the polynucleotide to the long chain amine monolayer. Additional phase transitions appear in the isotherms upon addition of sufficient amount of DNA, revealing the existence of specific processes such as folding or squeezing out of the DNA. This system is, however, highly reversible during compression-expansion cycles due to the strong interaction between the two components. These results are also supported by Brewster Angle Microscopy (BAM) images showing significant changes in the morphology of the film. Integral reflectivity of the BAM microscope has been used to study both isotherms themselves and the kinetic process of DNA inclusion into the lipid-like ODA monolayer. This parameter has been proven to be very effective for quantification of the monolayer processes showing high consistency with the compressibility and kinetics results.