Interactions of hydrogen with Pd and Pd/Ni alloy chain-functionalized single walled carbon nanotubes from density functional theory

Density functional theory is employed to study Pd and Pd/Ni alloy monatomic chain-functionalized metallic single walled carbon nanotubes (SWNT(6,6)) and semiconducting SWNT(10,0), and their interactions with hydrogen molecules. The stable geometries and binding energies have been determined for both isolated chains and chains on SWNT surfaces. We found that continuous Pd and Pd/Ni chains form on SWNTs with geometries close to stable geometries in the isolated chains. Ni alloying improves stability of the chains owing to a higher binding energy to both Pd and C atoms. The physical properties of SWNTs are significantly modified by chain functionalization. SWNT(10,0) is transformed to metal by either Pd or alloy chains, or to a smaller band gap semiconductor, depending on the Pd binding site. From calculations for H(2) interactions with the optimized chain-SWNT systems, the adsorption energy per H atom is found to be about 2.6 times larger for Pd/Ni chain-functionalized SWNTs than for pure Pd chain-functionalized SWNTs. Band structure calculations show that the SWNT(10,0) reverts back to semiconductor and SWNT(6,6) has reduced density of states at the Fermi level upon H(2) adsorption. This result is consistent with the experimentally observed increase of electrical resistance when Pd-coated SWNTs are used as H(2) sensing materials. Finally, our results suggest that Pd/Ni-SWNT materials are potentially good H(2)-sensing materials.     

Pd/SWNTs负载型催化剂的制备及其催化性能

利用单壁碳纳米管(SWNTs)自身的还原性, 将PdCl2溶液中的Pd2+直接还原成金属Pd负载在SWNTs表面上, 制备了具有良好催化性能的Pd/SWNTs负载型催化剂. 通过透射电镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和热重分析(TG)对Pd/SWNTs 进行了表征, 并利用Suzuki反应对Pd/SWNTs的催化性能进行了测试. 实验结果表明, 用SWNTs与12 mmol·L-1的PdCl2的水溶液直接作用, 得到Pd/SWNTs催化材料的Pd负载量达到14.13%(w, 质量分数), 颗粒分散均匀, 粒径小(2 nm左右), 与SWNTs结合紧密; 用经过H2还原的Pd/SWNTs作催化剂, 在90 ℃下进行Suzuki反应, 30 min后反应就基本完成, 其联苯的产率达到98.10%, 催化活性较高, 可望广泛用于有机合成反应.     

Immobilization of palladium nanoparticles on ionic liquid-triethylammonium chloride functionalized magnetic nanoparticles: As a magnetically separable,stable and recyclable catalyst for Suzuki-Miyaura cross-coupling reactions

A facile procedure was applied to successfully synthesize novel Pd nanoparticles immobilized on triethanolamine-functionalized magnetic nanoparticles [Fe₃O₄/IL/Pd]. Diverse characterizations (HR-TEM, XRD, FT-IR, TGA, EDX, FE-SEM, ICP, XPS and VSM) were carried out to identify intrinsic traits of the nanoparticles. At room temperature, Fe₃O₄/IL/Pd demonstrated high catalytic activity toward Suzuki-Miyaura cross-coupling reactions in aqueous solution. Based on the results, Fe₃O₄/IL/Pd acted as zwitterionic IL-type heterogeneous catalyst, which could be separated from the reaction mixture, conveniently. Moreover, it exhibited excellent recyclability for at least eight cycles without considerable loss of its activity.     

Electron promotion by surface functional groups of single wall carbon nanotubes to overlying metal particles in a fuel-cell catalyst

A remarkable promotion: Functional groups added onto single-wall carbon nanotubes (SWNTs) can significantly influence the activity of a noble metal for formic acid oxidation. Phenolate groups on SWNTs under alkaline conditions can double the activity of 20 % w/w Pd compared to unmodified SWNTs. This catalyst has 14 times higher activity than the commercial benchmark catalyst (10 % w/w Pd on Vulcan).     

Ordered Mesoporous Organosilica with Ionic‐Liquid Framework: An Efficient and Reusable Support for the Palladium‐Catalyzed Suzuki–Miyaura Coupling Reaction in Water

The preparation of a novel palladium‐supported periodic mesoporous organosilica based on alkylimidazolium ionic liquid (Pd@PMO‐IL) in which imidazoilium ionic liquid is uniformly distributed in the silica mesoporous framework is described. Both Pd@PMO‐IL and the parent PMO‐IL were characterized by N₂‐adsorption–desorption, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), TEM, and solid‐state NMR spectroscopy. We have demonstrated that Pd@PMO‐IL is an efficient and reusable catalyst for the Suzuki–Miyaura coupling reaction of various types of iodo‐, bromo‐, and even deactivated aryl chlorides in water. It was also found that although the PMO‐IL nanostructure acts as reservoir for soluble Pd species, it can also operate as a nanoscaffold to recapture the Pd nanoparticles into the mesochannels thus preventing extensive agglomeration of Pd. This observation might be attributed to the isolated ionic liquid units that effectively control the reaction mechanism by preventing Pd agglomeration and releasing and recapturing Pd nanoparticles during the reaction process. The catalyst can be recovered and reused for at least four reaction cycles without significant loss of activity.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Ionic liquid-containing polyethylene supported palladium: a green,highly efficient and stable catalyst for Suzuki reaction

The Suzuki coupling was carried out using a new, efficient and reusable polymer-supported Pd/IL catalyst (PEt@IL/Pd) under aqueous conditions. This catalyst was prepared through coacervation approach followed by treatment with Pd(OAc)₂. The FT-IR, SEM, TGA, TEM, XPS, ICP and EDX techniques were employed to characterize the PEt@IL/Pd. This catalyst exhibited high activity in the Suzuki coupling reaction under green conditions. Moreover, the catalyst could be recycled and reapplied for six times with no appreciable loss in its activity. The leaching test also showed high stability of catalytic Pd species under applied conditions.     

Lithium storage in single-walled carbon nanotubes

Here, we investigated the lithium insertion/extraction mechanism in single-walled carbon nanotubes (SWNTs) based both on the empty SWNTs and filled SWNTs, including ferrocene-filled SWNTs (Fc@SWNTs) and C₆₀-filled SWNTs (C₆₀@SWNTs). SWNTs, C₆₀@SWNTs and Fc@SWNTs were systematically investigated as anode materials for Li-ion batteries. The electrochemical performance of the C₆₀@SWNT electrode was slightly better than that of the SWNTs, and the reversible capacity of Fc@SWNTs per unit weight was ～1.7 times greater than that of the empty SWNTs due to its special tube internal structure. It was proved that the dominant reversible sites for lithium storage in empty SWNTs are the trigonal interstitial channels. Meanwhile, lithium can reversibly insert or extract the inner channels of the tubes after doping with ferrocene; the reversible capacity presented in the inner channels of Fc@SWNTs is about Li_1.13C₆.     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Arenediazonium salts immobilized in imidazolium ionic liquids as electrophilic partners in the Pd(OAc)2-catalyzed Matsuda-Heck arylation

The utility of arenediazonium salts immobilized in imidazolium-ILs [BMIMPF₆ and BMIMBF₄] for facile, high yielding, synthesis of olefins via the Pd(OAc)₂-catalyzed Matsuda-Heck arylation reaction has been demonstrated. The reaction can also be performed as a two-step process in the IL starting from ArNH₂, by sequential in-situ diazotization-arylation. Simple product isolation and the recycling/re-use of the IL are additional advantages of this one-pot method.     

High dispersion and electrocatalytic properties of palladium nanoparticles on single-walled carbon nanotubes

Palladium (Pd) nanoparticles were electrochemically dispersed on single-walled carbon nanotubes (SWNTs) by electroreduction of octahedral Pd(IV) complex formed on the SWNT surface. The structure and nature of the resulting Pd-SWNT composites were characterized by transmission electron microscopy and X-ray diffraction. The electrocatalytic properties of the Pd/SWNT electrode for hydrazine oxidation have been investigated by cyclic voltammetry; high electrocatalytic activity of the Pd/SWNT electrode can be observed. This may be attributed to the high dispersion of palladium catalysts and the particular properties of SWNT supports. The results imply that the Pd-SWNT composite has good potential applications in fuel cells.     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Functionalization of Single‐Walled Carbon Nanotubes with Cubic Prussian Blue and Its Application for Amperometric Sensing

In this work, we synthesized electroactive cubic Prussian blue (PB) modified single‐walled carbon nanotubes (SWNTs) nanocomposites using the mixture solution of ferric‐(III) chloride and potassium ferricyanide under ambient conditions. The successful fabrication of the PB‐SWNTs nanocomposites was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV‐vis absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and cyclic voltammetry (CV). PB nanocrystallites are observed to be finely attached on the SWNTs sidewalls in which the SWNTs not only act as a carrier of PB nanocrystallites but also as Fe(III)‐reducer. The electrochemical properties of PB‐SWNTs nanocomposites were also investigated. Using the electrodeposition technique, a thin film of PB‐SWNTs/chitosan nanocomposites was prepared onto glassy carbon electrode (GCE) for the construction of a H₂O₂ sensor. PB‐SWNTs/chitosan nanocomposites film shows enhanced electrocatalytic activity towards the reduction of H₂O₂ and the amperometric responses show a linear dependence on the concentration of H₂O₂ in a range of 0.5–27.5 mM and a low detection limit of 10 nM at the signal‐to‐noise ratio of 3. The time required to reach the 95% steady state response was less than 2 s. CV studies demonstrate that the modified electrode has outstanding stability. In addition, a glucose biosensor is further developed through the simple one‐step electrodeposition method. The observed wide concentration range, high stability and high reproducibility of the PB‐SWNTs/chitosan nanocomposites film make them promising for the reliable and durable detection of H₂O₂ and glucose.     

Pd(OAc)2 catalyzed synthesis of 2-aryl- and 2-heteroaryl-benzoxazoles and benzothiazoles in imidazolium ionic liquids (ILs) without additives and with recycling/reuse of the IL

A facile, high yielding, method for the synthesis of a library of 2-aryl- and 2-heteroaryl-benzoxazoles and benzothiazoles from readily available Schiff bases is reported employing catalytic amounts of Pd(OAc)₂ in imidazolium ionic liquids (bmim)BF₄ and (bmim)PF₆ without ligands and/or additives. Simple product isolation and recycling/re-use of the IL are additional advantages of this method.     

Magnetic methylene-based mesoporous organosilica composite-supported IL/Pd: a powerful and highly recoverable catalyst for oxidative coupling of phenols and naphthols

A novel magnetic methylene-based mesoporous organosilica composite-supported IL/Pd complex (Fe₃O₄@MePMO-IL/Pd) was synthesized and characterized, and its catalytic performance was investigated. The preparation of the Fe₃O₄@MePMO composite was achieved through coating of Fe₃O₄ nanoparticles with a mixture of tetramethoxysilane, bis(triethoxysilyl)methane, and (3-chloropropyl)-trimethoxysilane in the presence of cetyltrimethylammonium bromide surfactant. The Fe₃O₄@MePMO was then modified with alkyl imidazolium ionic liquid and palladium species to deliver the Fe₃O₄@MePMO-IL/Pd nanocatalyst. This catalyst was characterized using Fourier transform infrared, thermal gravimetric, wide-angle powder X-ray diffraction, low-angle powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray, and nitrogen adsorption–desorption analyses. The Fe₃O₄@MePMO-IL/Pd was effectively used as a highly recoverable and durable catalyst for the selective oxidative coupling of phenols and 2-naphthols under aerobic conditions.     

Synthesis of Platinum and Tin Oxide Co‐functionalized Single‐walled Carbon Nanotubes (Pt/SnO2/SWNTs) and their Sensing Properties toward Carbon Monoxide

Pt and SnO₂ were co‐functionalized on single‐walled carbon nanotubes (SWNTs) assembled on microelectrodes by electrochemical deposition where Pt nanoparticle's morphology, size, and density were tuned by controlling the applied potential and time. The systematic study to obtain the optimum condition for Pt‐decorated SnO₂/SWNTs (Pt/SnO₂/SWNTs) were performed and also correlate with its CO sensing performance. Illumination‐dependent sensing performance was examined using red, green and UV LED as light sources at room temperature. Under UV illumination, the sensitivity of Pt/SnO₂/SWNTs was enhanced to 2.1 %/ppm_V of CO with the lower detection limit of 0.05 ppm_V.     

Microwave‐Assisted Functionalization of Carbon Nanostructures in Ionic Liquids

The effect of microwave (MW) irradiation and ionic liquids (IL) on the cycloaddition of azomethine ylides to [60]fullerene has been investigated by screening the reaction protocol with regard to the IL medium composition, the applied MW power, and the simultaneous cooling of the system. [60]Fullerene conversion up to 98 % is achieved in 2–10 min, by using a 1:3 mixture of the IL 1‐methyl‐3‐n‐octyl imidazolium tetrafluoroborate ([omim]BF₄) and o‐dichlorobenzene, and an applied power as low as 12 W. The mono‐ versus poly‐addition selectivity to [60]fullerene can be tuned as a function of fullerene concentration. The reaction scope includes aliphatic, aromatic, and fluorous‐tagged (FT) derivatives. MW irradiation of IL‐structured bucky gels is instrumental for the functionalization of single‐walled carbon nanotubes (SWNTs), yielding group coverages of up to one functional group per 60 carbon atoms of the SWNT network. An improved performance is obtained in low viscosity bucky gels, in the order [bmim]BF₄> [omim]BF₄> [hvim]TF₂N (bmim=1‐methyl‐3‐n‐butyl imidazolium; hvim=1‐vinyl‐3‐n‐hexadecyl imidazolium). With this protocol, the introduction of fluorous‐tagged pyrrolidine moieties onto the SWNT surface (1/108 functional coverage) yields novel FT‐CNS (carbon nanostructures) with high affinity for fluorinated phases.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

A greener electrochromic liquid crystal based on ionic liquid electrolytes

An electrochromic liquid crystal (ECLC) material composed of only liquid crystal (LC) and ionic liquid (IL) was developed. The LC containing the substituted diphenylacetylene serves as electrochromic (EC) material to realise transmittance and colour change under the direct current (DC) field, while the IL with the designable cation and anion served as electrolyte. Herein, a series of IL electrolytes was screened to investigate how IL tunes the electro-optic performance of the ECLC cell. By testing the electrochemistry window of ILs in EC cells, IL with the [NTf₂]^? anion shows adequate electrochemical stability when the EC material undergoes oxidation and reduction. The electro-optic performance of ECLC containing 1-ethoxy-4-[2-(4-pentylphenyl) ethynyl]-benzene (PEB) and IL was then evaluated by UV-vis spectrometry under the control of an electrochemical work station. Compared with other PEB-IL, PEB-[Bmim][NTf₂] with [Bmim][NTf₂] electrolyte shows a satisfactory transmittance at low operating voltage. Furthermore, Pd NPs in situ formed in [Bmim][NTf₂] reduced the EC potential and improved the light scattering of the ECLC cell. In this work, we also designed a bifunctional device based on polymer dispersed liquid crystal (PDLC) that hosts electrochromic guest molecules, and analysed the electro-optical and electrochromic properties of LC electrolyte mixtures, in order to gain control of the incident daylight and glare in building and automotive applications.     

Grafting of aldehyde structures to single‐walled carbon nanotubes for application in phenolic resin‐based composites

Grafting of aldehyde structures to single‐walled carbon nanotubes (SWNTs) has been carried out to endow the nanotubes with appropriate wettability. The results of Fourier transform infrared (FTIR) spectroscopy, ultraviolin‐visible‐near infrared (UV‐VIS‐NIR) spectroscopy, and Raman spectroscopy provide the supporting evidence of aldehyde structures covalently attached to SWNTs. The improved wettability of aldehyde‐functionalized SWNTs (f‐SWNTs) was demonstrated by their good dispersion in organic medium, namely, ethanol and phenolic resin. The prospective covalent bonding between aldehyde structures on the surfaces of f‐SWNTs and phenolic resin makes it possible to prepare an integrated composite with the enhanced‐interfacial adhesion. The f‐SWNT composites, therefore, show much higher average values of dσ/dW_CNT and dE/dW_CNT (i.e., tensile strength and Young's modulus per unit weight fraction) compared with the composites filled with pristine SWNTs or MWNTs. The respective maxima are 9680 MPa and 320 GPa. It is thus feasible for f‐SWNTs to prepare the moderately enhanced but lightweight phenolic composites. Furthermore, the incorporation of f‐SWNTs does not limit the application of phenolic resin as insulation material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6135–6144, 2009