Enzyme-functionalized gold nanowires for the fabrication of biosensors

Gold nanowires were prepared by an electrodeposition strategy using nanopore polycarbonate (PC) membrane, with the average diameter of the nanowires about 250 nm and length about 10 microm. The nanowires prepared were dispersed into chitosan (CHIT) solution and stably immobilized onto glassy carbon electrode (GCE) surface. The electrochemical behavior of gold nanowire modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H(2)O(2)) were investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. Moreover, the good biocompatibility of nanometer-sized gold, the vast surface area of the nanowire-structure make it ideal for adsorption of enzymes for the fabrication of biosensors. Glucose oxidase was adsorbed onto the nanowire surface to fabricate glucose biosensor as an application example. The detection of glucose was performed in phosphate buffer (pH 6.98) at -0.2 V. The resulting glucose biosensor exhibited sensitive response, with a short response time (<8 s), a linear range of 10(-5)-2 x 10(-2) M and detection limit of 5 x 10(-6) M.     

An atomistic model and key parameters for devising single molecular nanowire sensors

Based on one impurity model Hamiltonian describing a nanowire upon adsorption of a molecule, we obtain an analytical formula of the conductance which is governed clearly by modulating key parameters. The formula shows that the conductance change in nanowire upon adsorption of a molecule is mainly controlled by three factors, electron hopping between adsorbed molecule and nanowire, chemical potential, and the change of atomic configurations of the nanowires near the adsorption site. Conductance is very sensitive to the choice of these key parameters; therefore, a proper nanowire system that renders matched chemical potential as well as hopping strength between the nanowire and the adsorbed molecule should be devised for the sensor applications. Our model calculations give similar conductance features to the conductance obtained by the first principle calculations for a singe-molecule-adsorbed molecular wire. It is worthy of note that the system can be in antiresonance, which is characterized by a quick drop in conductance when a molecule is adsorbed on the nanowires.     

Symmetry controlled spin polarized conductance in au nanowires

The fact that the resistance of propagating electrons in solids depends on their spin orientation has led to a new field called spintronics. With the parallel advances in nanoscience, it is now possible to talk about nanospintronics. Many works have focused on the study of charge transport along nanosystems, such as carbon nanotubes, graphene nanoribbons, or metallic nanowires, and spin dependent transport properties at this scale may lead to new behaviors due to the manipulation of a small number of spins. Metal nanowires have been studied as electric contacts where atomic and molecular insertions can be constructed. Here we describe what might be considered the ultimate spin device, namely, a Au thin nanowire with one Co atom bridging its two sides. We show that this system has strong spin dependent transport properties and that its local symmetry can dramatically change them, leading to a significant spin polarized conductance.     

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.     

Characterization and Application of Surface Plasmon-Enhanced Optical Diffraction from Electrodeposited Gold Nanowire Arrays

Arrays of gold nanowires formed by the process of lithographically patterned nanowire electrodeposition (LPNE) were characterized by a combination of SEM, polarized UV-visible absorption spectroscopy and optical diffraction measurements. A transverse localized surface plasmon resonance (LSPR) was observed for gold nanowire arrays with an absorption maximum (λ(max)) that varied with nanowire width. Transmission optical diffraction measurements were measured with the even and odd diffraction orders creating an alternating, out of phase sinusoidal intensity pattern characteristic of the LPNE nanowire arrays. The intensities of the even diffraction order maxima were the strongest for nanowires with a width of 115 ± 10 nm; nanowires of this width exhibit a λ(max) of 635 ± 10 nm, verifying that the transverse LSPR has enhanced the optical diffraction signal. Real time total internal reflection diffraction intensity measurements were used to monitor in situ the electrodeposition of silver monolayers onto the gold nanowire arrays.     

金纳米线阵列制备及其光谱特性

利用电化学沉积方法在重离子径迹模板中制备出直径从45 nm到200 nm, 长径比达700的金纳米线阵列, 利用扫描电子显微镜(SEM)和X射线衍射(XRD)对所制备金纳米线的形貌及晶体结构进行分析, 结果表明, 在1.5 V(无参比电极)沉积电压下所制备出的直径为200 nm金纳米线沿[100]晶向具有较好择优取向. 利用紫外-可见光谱(UV-Vis)对镶嵌在透明模板中平行排列的金纳米线阵列光学特性进行研究, 发现金纳米线直径为45 nm时, 其紫外可见光谱在539 nm处有强烈吸收峰, 随着金纳米线直径增加, 吸收峰红移, 当金纳米线直径达到200 nm时, 其吸收峰峰位移至700 nm. 结合金纳米颗粒相关表面等离子体共振吸收效应对实验结果进行了讨论.     

Metallic LiMo3Se3 nanowire film sensors for electrical detection of metal ions in water

LiMo 3Se 3 nanowire film sensors were fabricated by drop-coating a 0.05% (mass) aqueous nanowire solution onto microfabricated indium tin oxide electrode pairs. According to scanning electron microscopy (SEM) and atomic force microscopy (AFM), the films are made of a dense network of 3-7 nm thick nanowire bundles. Immersion of the films in 1.0 M aqueous solutions of group 1 or 2 element halides or of Zn(II), Mn(II), Fe(II), or Co(II) chlorides results in an increase of the electrical resistance of the films. The resistance change is always positive and reaches up to 9% of the base resistance of the films. It occurs over the course of 30-240 s, and it is reversible for monovalent ions and partially reversible for divalent ions. The signal depends on the concentration of the electrolyte and on the size and charge of the metal cation. Anions do not play a significant role, presumably, because they are repelled by the negatively charged nanowire strands. The magnitude of the electrical response and its sign suggest that it is due to analyte-induced scattering of conduction electrons in the nanowires. An ion-induced field effect can be excluded based on gated conductance measurements of the nanowire films.     

Synthesis and Characterization of ZnO Nanowires

Zinc oxide is a wide bandgap (3.37 eV) semiconductor with a hexagonal wurtzite crystal structure. ZnO prepared in nanowire form may be used as a nanosized ultraviolet light-emitting source. In this study, ZnO nanowires were prepared by vapor-phase transport of Zn vapor onto gold-coated silicon substrates in a tube furnace heated to 900 ?C. Gold serves as a catalyst to capture Zn vapor during nanowire growth. Size control of ZnO nanowires has been achieved by varying the gold film thickness…     

Ag核Au壳双金属复合纳米线的制备及其表面增强拉曼光谱研究

采用氧化铝模板结合交流电沉积技术制备纯银纳米线, 然后通过化学还原方法, 并控制加入的金盐的量, 在已制备好的银线表面包裹不同厚度的金壳层, 得到具有核壳结构的Ag_核Au_壳复合纳米线. 采用电子显微镜(SEM, TEM)和表面增强拉曼光谱对该复合结构纳米线进行相关表征, 纳米线的表面形貌与加入的金盐的量有关. 以苯硫酚(TP)和对巯基苯胺(PATP)为探针分子, 研究了此类复合纳米线的表面增强拉曼散射效应. 并以PATP在金银纳米线表面吸附的表面增强拉曼光谱的差别为探针, 表征了复合纳米线表面金的包裹程度, 结果表明一定厚度的包裹程度可制备无针孔效应的核壳结构金银复合纳米线.     

Growth of colloidal gold nanostars and nanowires induced by palladium doping

Gold-palladium nanocrystals with starlike shapes and high aspect ratio nanowires were grown in a surfactant solution. The incorporation of palladium into the growing gold nanostructures induced nanowire formation with high yield. Kinetic control of the metal deposition rate through tuning of the pH value to about 5 was crucial for the nanowire growth. The nanostructures were characterized by high-resolution electron microscopy and energy-dispersive X-ray spectroscopy. The Au-Pd nanowires were deposited on functionalized silicon wafers.     

Molten gallium as a catalyst for the large-scale growth of highly aligned silica nanowires

The vapor-liquid-solid (VLS) process is a fundamental mechanism for the growth of nanowires, in which a small size (5-100 nm in diameter), high melting point metal (such as gold and iron) catalyst particle directs the nanowire's growth direction and defines the diameter of the crystalline nanowire. In this article, we show that the large size (5-50 microm in diameter), low melting point gallium droplets can be used as an effective catalyst for the large-scale growth of highly aligned, closely packed silica nanowire bunches. Unlike any previously observed results using gold or iron as catalyst, the gallium-catalyzed VLS growth exhibits many amazing growth phenomena. The silica nanowires tend to grow batch by batch. For each batch, numerous nanowires simultaneously nucleate, grow at nearly the same rate and direction, and simultaneously stop growing. The force between the batches periodically lifts the gallium catalyst upward, forming two different kinds of products on a silicon wafer and alumina substrate. On the silicon wafer, carrot-shaped tubes whose walls are composed of highly aligned silica nanowires with diameters of 15-30 nm and length of 10-40 microm were obtained. On the alumina substrate, cometlike structures composed of highly oriented silica nanowires with diameters of 50-100 nm and length of 10-50 microm were formed. A growth model was proposed. The experimental results expand the VLS mechanism to a broader range.     

Dependence of the recombination kinetics of geminate electron-ion pairs on the mean free path of electrons

We have investigated how the kinetics of geminate recombination of electron-ion pairs is influenced by the mean free path of electrons. By use of the Monte Carlo method previously developed the decay of the pair survival probability was numerically calculated for a variety of values of the mean free path of electrons. When the mean free path is negligibly small compared with the Onsager length, our result is in good agreement with the Hong-Noolandi result based on the Smoluchowski equation. However, as the mean free path increases, it deviates from their result increasingly. This indicates that the treatment based on the Smoluchowski equation is inadequate when the mean free path of electrons is not negligible compared with the Onsager length. We have found that for mean free paths comparable with or larger than the Onsager length the decay kinetics of the pair survival probability approximately follows the first-order kinetics except at very short and very long times. The dependence of the escape probability on the mean free path of electrons is also briefly discussed.     

Ultrathin Au nanowires and their transport properties

This paper presents a facile synthesis of single-crystalline Au nanowires by reduction of HAuCl4 in oleic acid and oleylamine. The diameter of these micron-meter-long Au nanowires is controlled to be 3 and 9 nm by volume ratio of oleylamine and oleic acid. When linked between two gold electrodes, the 9 nm Au nanowire shows good electron conductivity with its breakdown current density reaching 3.5 x 10(12) A/m2. This demonstrates that the chemically made ultrathin Au nanowires can be used as a molecular-scale interconnect for nanoelectronic applications.     

Large-area highly-oriented SiC nanowire arrays: synthesis, Raman, and photoluminescence properties

Large-area highly oriented SiC nanowire arrays have been fabricated by chemical vapor reaction using an ordered nanoporous anodic aluminum oxide (AAO) template and a graphite reaction cell. Their microstructures were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction and high-resolution transmission electron microscopy. The results show that the nanowires are single-crystalline beta-SiC's with diameters of about 30-60 nm and lengths of about 8 microm, which are parallel to each other, uniformly distributed, highly oriented, and in agreement with the nanopore diameter of the applied AAO template. The nanowire axes lie along the [111] direction and possess a high density of planar defects. Some unique optical properties are found in the Raman spectroscopy and photoluminescence emission from oriented SiC nanowire arrays, which are different from previous observations of SiC materials. The growth mechanism of oriented SiC nanowire arrays is also analyzed and discussed.     

Bioaffinity sensing using biologically functionalized conducting-polymer nanowire

A simple, one-step method for fabricating single biologically functionalized conducting-polymer (polypyrrole) nanowire on prepatterned electrodes and its application to biosensing was demonstrated. The biologically functionalized polypyrrole was formed by the electropolymerization of an aqueous solution of pyrrole monomer and the model biomolecule, avidin- or streptavidin-conjugated ZnSe/CdSe quantum dots, within 100 or 200 nm wide by 3 mum long channels between gold electrodes on prefabricated silicon substrate. When challenged with biotin-DNA, the avidin- and streptavidin-polypyrrole nanowires generated a rapid change in resistance to as low as 1 nM, demonstrating the utility of the biomolecule-functionalized nanowire as biosensor. The method offers advantages of direct incorporation of functional biological molecules into the conducting-polymer nanowire during its synthesis, site-specific positioning, built-in electrical contacts, and scalability to high-density nanoarrays over the reported silicon nanowire and carbon nanotube biosensors.     

Magnetically Assembled Multisegmented Nanowires and Their Applications

Here we report a cost effective and versatile way of synthesizing and assembling multi‐functional (e.g., gold‐polypyrrole‐nickel‐gold) nanowires. Multisegmented nanowires were synthesized using electrodeposition method for precise control over segment dimensions for proper expression of material functionality. The nanowires were integrated on microfabricated electrodes using magnetic dipole interactions between the ferromagnetic segment in the nanowire and the ferromagnetic electrodes. The electrical properties of multisegmented nanowires showed semiconducting behavior with the activation energy of ca. 0.27 eV for the conducting polymer segment of the nanowire. These nanowire devices showed response towards light and exposure to ammonia, demonstrating their potential use as photonic device and gas sensor, respectively.     

Hybrid Silver Nanowire/Titanium Oxides Nanocomposites as Anode for Dye‐Sensitized Solar Cell Application

In this study, we investigated the effect of adding metallic nanowires in the anode of dye‐sensitized solar cell (DSSC) to improve the photovoltaic efficiency. Photo‐excited electrons can be efficiently transferred to the electrode through the network of the dispersed metallic nanowires added in the anode. We compared the photovoltaic performance with the anodes of standard P‐25, the silver nanowire/P‐25, and the TiO₂ coated silver nanowire/P‐25 DSSC. The DSSC with TiO₂ coated silver nanowires shows significantly improved (about 1.5 and 2.0 times) photovoltaic efficiency and structural durability compared with that of the standard P‐25 and the silver nanowires without coating DSSC. The TiO₂ coated silver nanowire can resist the redox chemical corrosions by iodide ions since they are protected from contact with electrolytes during the photovoltaic reaction by the coated thin TiO₂ layer. The presence of the metal network (silver nanowires) improves the production and transportation of light generated current so as to the photovoltaic efficiency.     

纳米多孔金薄膜的表面等离子体共振传感特性

对淀积在玻璃衬底上厚度约60 nm的金银合金溅射薄膜进行硝酸腐蚀脱银处理, 得到纳米多孔金薄膜. 利用自建的波长检测型表面等离子体共振(SPR)传感装置研究了腐蚀时间对纳米多孔金薄膜SPR特性的影响, 结果发现纳米多孔金薄膜与水溶液接触后在400-900 nm光谱范围内不具有SPR效应, 而当薄膜置于空气中时会产生明显的传播等离子体共振吸收峰, 其共振波长随腐蚀时间增加逐渐红移. 纳米多孔金薄膜在空气气氛中的SPR效应使其能够用于原位监测气相分子在孔内的吸附, 还可对在液相中吸附的生化分子进行离位测试. 本文对L-谷胱甘肽、L-半胱氨酸、2-氨基乙硫醇三种含巯基的生化小分子在纳米多孔金薄膜内的吸附进行了离位分析, 结果表明与传统的致密金薄膜SPR芯片比较, 纳米多孔金薄膜对这些分子显示出更高的灵敏度和更低的检测下限, 这归功于多孔金的大比表面积使其能够吸附大量的生化小分子. 实验还对乙醇蒸气在纳米多孔金薄膜内的吸附进行了原位监测, 发现吸附平衡所用时间较长, 约为160 min.     

Density-controlled growth of aligned ZnO nanowires sharing a common contact: a simple, low-cost, and mask-free technique for large-scale applications

An effective, low cost, simple, and mask-free pathway is demonstrated for achieving density control of the aligned ZnO nanowires grown for large-scale applications. By a slight variation of the thickness of the thermally evaporated gold catalyst film, a significant change in the density of aligned ZnO nanowires has been controlled. The growth processes of the nanowires on an Al(0.5)Ga(0.5)N substrate has been studied based on the wetting behavior of gold catalyst with or without source vapor, and the results classify the growth processes into three categories: separated dots initiated growth, continuous layer initiated growth, and scattered particle initiated growth. This study presents an approach for growing aligned nanowire arrays on a ceramic substrate with the simultaneous formation of a continuous conducting electrode at the roots, which is important for device applications, such as field emission.     

Free-standing aluminium nanowire architectures made in an ionic liquid

We report on the electrochemical synthesis of free‐standing aluminium nanowire architectures through a template‐assisted electrodeposition technique. For this purpose, nuclear track‐etched polycarbonate membranes were employed as templates. One side of the template was sputtered with a thin gold film to serve as a working electrode. Subsequently the nanowires were made in the ionic liquid 1‐ethyl‐3‐methylimidazolium chloride ([EMIm]Cl)/AlCl₃ (40/60 mol %) under potentiostatic conditions. Two different electrodeposition procedures were employed to fabricate strongly adherent Al nanowire structures on an electrodeposited Al layer. In the first procedure, electrodeposition simultaneously occurs along the pores of the template and on the Au‐sputtered side of the template. In the second procedure, electrodeposition takes place in two different steps: first a thick supporting film of Al is deposited on the sputtered side of the membrane and second Al nanowires are grown within the pores. After chemical dissolution of the membrane in dichloromethane, an aluminium foil of a controlled thickness with a three‐dimensional nanowire structure on one side was obtained. Different nanowire architectures, such as free‐standing nanowires, vertically aligned tree‐shaped arrays, and bunched nanowire films, were obtained. Such nanowire architectures are of particular interest for applications in Li‐ion micro‐batteries.