Photodriven electron and energy transfer from a light-harvesting metallodendrimer

Intermolecular electron and energy transfer from a light-harvesting metallodendrimer [Ru[bpy(C-450)(4)](3)](2+), where bpy(C-450)(4) is a 2,2'-bipyridine derivative containing 4 coumarin-450 units connected together through aryl ether linkages, is observed in acetonitrile solutions at room temperature. The model complex [Ru(dmb)(3)](2+), where dmb is 4,4'-dimethyl-2,2'-bipyridine, is included for quantitative comparison. The excited states of both compounds are metal-to-ligand charge transfer in nature and participate in excited-state electron and triplet energy transfer processes. Quenching constants were determined from luminescence and time-resolved absorption experiments at constant ionic strength. [Ru[bpy(C-450)(4)](3)](2+) displays significantly slower quenching rates to molecular oxygen and methyl viologen relative to the other processes investigated. Triplet energy transfer from [Ru[bpy(C-450)(4)](3)](2+) to 9-methylanthracene is quantitatively indistinguishable from [Ru(dmb)(3)](2+) while reductive electron transfer from phenothiazine was slightly faster in the former. With the exception of dioxygen quenching, our results indicate that the current dendritic structure is ineffective in shielding the core from bimolecular electron and triplet energy transfer reactions. Electrochemical measurements of [Ru[bpy(C-450)(4)](3)](2+) reveal irreversible oxidative processes at potentials slightly negative to the Ru(III/II) potential that are assigned to oxidations in the dendritic structure. Excited-state oxidative electron-transfer reactions facilitate this process resulting in the reduction of ground-state Ru(III) to Ru(II) and the trapping of the methyl viologen radical cation (MV(*+)) when methyl viologen serves as the quencher. This process generates a minimum of 9 MV(*+)'s for every [Ru[bpy(C-450)(4)](3)](2+) molecule and disassembles the metallodendrimer, resulting in the production of a [Ru(dmb)(3)](2+)-like species and "free" C-450-like dyes.     

Electron donor-acceptor dyads and triads based on tris(bipyridine)ruthenium(II) and benzoquinone: synthesis,characterization, and photoinduced electron transfer reactions

Two electron donor-acceptor triads based on a benzoquinone acceptor linked to a light absorbing [Ru(bpy)(3)](2+) complex have been synthesized. In triad 6 (denoted Ru(II)-BQ-Co(III)), a [Co(bpy)(3)](3+) complex, a potential secondary acceptor, was linked to the quinone. In the other triad, 8 (denoted PTZ-Ru(II)-BQ), a phenothiazine donor was linked to the ruthenium moiety. The corresponding dyads Ru(II)-BQ (4) and PTZ-Ru(II) (9) were prepared for comparison. Upon light excitation in the visible band of the ruthenium moiety, electron transfer to the quinone occurred with a rate constant k(f) = 5 x 10(9) s(-)(1) (tau(f) = 200 ps) in all the quinone containing complexes. Recombination to the ground state followed, with a rate constant k(b) approximately 4.5 x 10(8) s(-)(1) (tau(b) approximately 2.2 ns), for both Ru(II)-BQ and Ru(II)-BQ-Co(III) with no indication of a charge shift to generate the reduced Co(II) moiety. In the PTZ-Ru(II)-BQ triad, however, the initial charge separation was followed by a rapid (k > 5 x 10(9) s(-)(1)) electron transfer from the phenothiazine moiety to give the fairly long-lived PTZ(*)(+)-Ru(II)-BQ(*)(-) state (tau = 80 ns) in unusually high yield for a [Ru(bpy)(3)](2+)-based triad (> 90%), that lies at DeltaG degrees = 1.32 eV relative to the ground state. Unfortunately, this triad turned out to be rather photolabile. Interestingly, coupling between the oxidized PTZ(*)(+) and the BQ(*)(-) moieties seemed to occur. This discouraged further extension to incorporate more redox active units. Finally, in the dyad PTZ-Ru(II) a reversible, near isoergonic electron transfer was observed on excitation. Thus, a quasiequilibrium was established with an observed time constant of 7 ns, with ca. 82% of the population in the PTZ-Ru(II) state and 18% in the PTZ(*)(+)-Ru(II)(bpy(*)(-)) state. These states decayed in parallel with an observed lifetime of 90 ns. The initial electron transfer to form the PTZ(*)(+)-Ru(II)(bpy(*)(-)) state was thus faster than what would have been inferred from the Ru(II) emission decay (tau = 90 ns). This result suggests that reports for related PTZ-Ru(II) and PTZ-Ru(II)-acceptor complexes in the literature might need to be reconsidered.     

Evidence for through-space electron transfer in the distance dependence of normal and inverted electron transfer in oligoproline arrays

Four new helical oligoproline assemblies containing 16, 17, 18, and 19 proline residues and ordered arrays of a Ru(II)-bipyridyl chromophore and a phenothiazine electron-transfer donor have been synthesized in a modular fashion by solid-phase peptide synthesis. These arrays are illustrated and abbreviated as CH(3)CO-Pro(6)-Pra(PTZ)-Pro(n)()-Pra(Ru(II)b(2)m)(2+)-Pro(6)-NH(2), where PTZ is 3-(10H-phenothiazine-10)propanoyl and (Ru(II)b'(2)m)(2+) is bis(4,4'-diethylamide-2,2'-bipyridine)(4-methyl,4'-carboxylate,2,2'-bipyridine)ruthenium(II) dication with n = 2 (2), 3 (3), 4 (4), and 5 (5). They contain PTZ as an electron-transfer donor and (Ru(II)b'(2)m)(2+) as a metal-to-ligand charge transfer (MLCT) light absorber and are separated by proline-to-proline through-space distances ranging from 0 (n = 2) to 12.9 A (n = 5) relative to the n = 2 case. They exist in the proline-II helix form in water, as shown by circular dichroism measurements. Following laser flash Ru(II) --> b'(2)m MLCT excitation at 460 nm in water, excited-state PTZ --> Ru(2+) quenching (k(2)) occurs by reductive electron transfer, followed by Ru(+) --> PTZ(+) back electron transfer (k(3)), as shown by transient absorption and emission measurements in water at 25 degrees C. Quenching with DeltaG degrees = -0.1 eV is an activated process, while back electron transfer occurs in the inverted region, DeltaG degrees = -1.8 eV, and is activationless, as shown by temperature dependence measurements. Coincidentally, both reactions have comparable distance dependences, with k(2)( )()varying from = 1.9 x 10(9) (n = 2) to 2.2 x 10(6) s(-)(1) (n = 4) and k(3) from approximately 2.0 x 10(9) (n = 2) to 2.2 x 10(6) s(-)(1) (n = 4). For both series there is a rate constant enhancement of approximately 10 for n = 5 compared to n = 4 and a linear decrease in ln k with the through-space separation distance, pointing to a significant and probably dominant through-space component to intrahelical electron transfer.     

Distinguishing between Dexter and rapid sequential electron transfer in covalently linked donor-acceptor assemblies

The syntheses, physical, and photophysical properties of a family of complexes having the general formula [M2(L)(mcb)(Ru(4,4'-(X)2-bpy)2)](PF6)3 (where M = Mn(II) or Zn(II), X = CH3 or CF3, mcb is 4'-methyl-4-carboxy-2,2'-bipyridine, and L is a Schiff base macrocycle derived from 2,6-diformyl-4-methylphenol and bis(2-aminoethyl)-N-methylamine) are described. The isostructural molecules all consist of dinuclear metal cores covalently linked to a Ru(II) polypyridyl complex. Photoexcitation of [Mn2(L)(mcb)(Ru((CF3)2-bpy)2)](PF6)3 (4) in deoxygenated CH2Cl2 solution results in emission characteristic of the 3MLCT excited state of the Ru(II) chromophore but with a lifetime (tau(obs) = 5.0 +/- 0.1 ns) and radiative quantum yield (Phi(r) approximately 7 x 10(-4)) that are significantly attenuated relative to the Zn(II) model complex [Zn2(L)(mcb)(Ru((CF3)2-bpy)2)](PF6)3 (6) (tau(obs) = 730 +/- 30 ns and Phi(r) = 0.024, respectively). Quenching of the 3MLCT excited state is even more extensive in the case of [Mn2(L)(mcb)(Ru((CH3)2-bpy)2)](PF6)3 (3), whose measured lifetime (tau(obs) = 45 +/- 5 ps) is >10(4) shorter than the corresponding model complex [Zn2(L)(mcb)(Ru((CH3)2-bpy)2)](PF6)3 (5) (tau(obs) = 1.31 +/- 0.05 micros). Time-resolved absorption measurements on both Mn-containing complexes at room-temperature revealed kinetics that were independent of probe wavelength; no spectroscopic signatures for electron-transfer photoproducts were observed. Time-resolved emission data for complex 4 acquired in CH2Cl2 solution over a range of 200-300 K could be fit to an expression of the form k(nr) = k0 + A x exp{-DeltaE/kB T} with k0 = 1.065 +/- 0.05 x 10(7) s(-1), A = 3.7 +/- 0.5 x 10(10) s(-1), and DeltaE = 1230 +/- 30 cm(-1). Assuming an electron-transfer mechanism, the variable-temperature data on complex 4 would require a reorganization energy of lambda approximately 0.4-0.5 eV which is too small to be associated with charge separation in this system. This result coupled with the lack of enhanced emission at temperatures below the glass-to-fluid transition of the solvent and the absence of visible absorption features associated with the Mn(II)2 core allows for a definitive assignment of Dexter transfer as the dominant excited-state reaction pathway. A similar conclusion was reached for complex 3 based in part on the smaller driving force for electron transfer (DeltaG0(ET) = -0.1 eV), the increase in probability of Dexter transfer due to the closer proximity of the donor excited state to the dimanganese acceptor, and a lack of emission from the compound upon formation of an optical glass at 80 K. Electronic coupling constants for Dexter transfer were determined to be approximately 10 cm(-1) and approximately 0.15 cm(-1) in complexes 3 and 4, respectively, indicating that the change in spatial localization of the excited state from the bridge (complex 3) to the periphery of the chromophore (complex 4) results in a decrease in electronic coupling to the dimanganese core of nearly 2 orders of magnitude. In addition to providing insight into the influence of donor/acceptor proximity on exchange energy transfer, this study underscores the utility of variable-temperature measurements in cases where Dexter and electron-transfer mechanisms can lead to indistinguishable spectroscopic observables.     

Syntheses, characterization, and photochemical properties of amidate-bridged Pt(bpy) dimers tethered to Ru(bpy)3(2+) derivatives

Amidate-bridged diplatinum(II) entities [Pt(2)(bpy)(2)(μ-amidato)(2)](2+) (amidate = pivalamidate and/or benzamidate; bpy = 2,2'-bipyridine) were covalently linked to one or two Ru(bpy)(3)(2+)-type derivatives. An amide group was introduced at the periphery of Ru(bpy)(3)(2+) derivatives to give metalloamide precursors [Ru(bpy)(2)(BnH)](2+) (abbreviated as RuBnH, n = 1 and 2), where deprotonation of amide BnH affords the corresponding amidate Bn, B1H = 4-(4-carbamoylphenyl)-2,2'-bipyridine, and B2H = ethyl 4'-[N-(4-carbamoylphenyl)carbamoyl]-2,2'-bipyridine-4-carboxylate. From a 1:1:1 reaction of [Pt(2)(bpy)(2)(μ-OH)(2)](NO(3))(2), RuBnH, and pivalamide, trinuclear complexes [Pt(2)(bpy)(2)(μ-RuBn)(μ-pivalamidato)](4+) (abbreviated as RuBn-Pt(2)) were isolated and characterized. Tetranuclear complexes [Pt(2)(bpy)(2)(μ-RuBn)(2)](6+) (abbreviated as (RuBn)(2)-Pt(2)) were separately prepared and characterized in detail. The quenching of the triplet excited state of the Ru(bpy)(3)(2+) derivative (i.e., Ru*(bpy)(3)(2+)) upon tethering the Pt(2)(bpy)(2)(μ-amidato)(2)(2+) moiety is strongly enhanced in RuB1-Pt(2) and (RuB1)(2)-Pt(2), while it is only slightly enhanced in RuB2-Pt(2) and (RuB2)(2)-Pt(2). These are partly explained by the driving forces for the electron transfer from the Ru*(bpy)(3)(2+) moiety to the Pt(2)(bpy)(2)(μ-amidato)(2)(2+) moiety (ΔG°(ET)); the ΔG°(ET) values for RuB1-Pt(2), (RuB1)(2)-Pt(2), RuB2-Pt(2), and (RuB2)(2)-Pt(2) are estimated as -0.01, 0.00, +0.22, and +0.28 eV, respectively. The considerable difference in the photochemical properties of the B1- and B2-bridged systems were further examined based on the emission decay and transient absorption measurements, which gave results consistent with the above conclusions.     

Ruthenium(II)-polyazine light absorbers bridged to reactive cis-dichlororhodium(III) centers in a bimetallic molecular architecture

Bimetallic complexes of the form [(bpy)(2)Ru(BL)RhCl(2)(phen)](PF(6))(3), where bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and BL = 2,3-bis(2-pyridyl)pyrazine (dpp) or 2,2'-bipyrimidine (bpm), were synthesized, characterized, and compared to the [{(bpy)(2)Ru(BL)}(2)RhCl(2)](PF(6))(5) trimetallic analogues. The new complexes were synthesized via the building block method, exploiting the known coordination chemistry of Rh(III) polyazine complexes. In contrast to [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) and [{(bpy)(2)Ru(bpm)}(2)RhCl(2)](PF(6))(5), [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) have a single visible light absorber subunit coupled to the cis-Rh(III)Cl(2) moiety, an unexplored molecular architecture. The electrochemistry of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) showed a reversible oxidation at 1.61 V (vs Ag/AgCl) (Ru(III/II)), quasi-reversible reductions at -0.39 V, -0.74, and -0.98 V. The first two reductive couples corresponded to two electrons, consistent with Rh reduction. The electrochemistry of [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) exhibited a reversible oxidation at 1.76 V (Ru(III/II)). A reversible reduction at -0.14 V (bpm(0/-)), and quasi-reversible reductions at -0.77 and -0.91 V each corresponded to a one electron process, bpm(0/-), Rh(III/II), and Rh(II/I). The dpp bridged bimetallic and trimetallic display Ru(dpi)-->dpp(pi*) metal-to-ligand charge transfer (MLCT) transitions at 509 nm (14,700 M(-1) cm(-1)) and 518 nm (26,100 M(-1) cm(-1)), respectively. The bpm bridged bimetallic and trimetallic display Ru(dpi)-->bpm(pi*) charge transfer (CT) transitions at 581 nm (4,000 M(-1) cm(-1)) and 594 nm (9,900 M(-1) cm(-1)), respectively. The heteronuclear complexes [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) had (3)MLCT emissions that are Ru(dpi)-->dpp(pi*) CT in nature but were red-shifted and lower intensity than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4). The lifetimes of the (3)MLCT state of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) at room temperature (30 ns) was shorter than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4), consistent with favorable electron transfer to Rh(III) to generate a metal-to-metal charge-transfer ((3)MMCT) state. The reported synthetic methods provide means to a new molecular architecture coupling a single Ru light absorber to the Rh(III) center while retaining the interesting cis-Rh(III)Cl(2) moiety.     

Long-range electron transfer across molecule-nanocrystalline semiconductor interfaces using tripodal sensitizers

Four tripodal sensitizers, Ru(bpy)(2)(Ad-tripod-phen)(2+) (1), Ru(bpy)(2)(Ad-tripod-bpy)(2+) (2), Ru(bpy)(2)(C-tripod-phen)(2+) (3), and Ru(bpy)(2)(C-tripod-bpy)(2+) (4) (where bpy is 2,2'-bipyridine, phen is 1,10-phenanthroline, and Ad-tripod-bpy (phen) and C-tripod-bpy (phen) are tripod-shaped bpy (phen) ligands based on 1,3,5,7-tetraphenyladamantane and tetraphenylmethane, respectively), have been synthesized and characterized. The tripodal sensitizers consist of a rigid-rod arm linked to a Ru(II)-polypyridine complex at one end and three COOR groups on the other end that bind to metal oxide nanoparticle surfaces. The excited-state and redox properties of solvated and surface-bound 1-4 have been studied at room temperature. The absorption spectra, emission spectra, and electrochemical properties of 1-4 in acetonitrile solution are preserved when 1-4 are bound to nanocrystalline (anatase) TiO(2) or colloidal ZrO(2) mesoporous films. This behavior is indicative of weak electronic coupling between TiO(2) and the sensitizer. The kinetics for excited-state decay are exponential for 1-4 in solution and are nonexponential when 1-4 are bound to ZrO(2) or TiO(2). Efficient and rapid (k(cs) > 10(8) s(-)(1)) excited-state electron injection is observed for 1-4/TiO(2). The recombination of the injected electron with the oxidized Ru(III) center is well described by a second-order kinetic model with rate constants that are independent of the sensitizer. The sensitizers bound to TiO(2) were reversibly oxidized electrochemically with an apparent diffusion coefficient approximately 1 x 10(-11) cm(2) s(-)(1).     

Toward exceeding the Shockley-Queisser limit: photoinduced interfacial charge transfer processes that store energy in excess of the equilibrated excited state

Nanocrystalline (anatase), mesoporous TiO2 thin films were functionalized with [Ru(bpy)2(deebq)](PF6)2, [Ru(bq)2(deeb)](PF6)2, [Ru(deebq)2(bpy)](PF6)2, [Ru(bpy)(deebq)(NCS)2], or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine, bq is 2,2'-biquinoline, and deeb and deebq are 4,4'-diethylester derivatives. These compounds bind to the nanocrystalline TiO2 films in their carboxylate forms with limiting surface coverages of 8 (+/- 2) x 10(-8) mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.70 V vs SCE) occurs prior to TiO2 reduction. Steady state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced sensitizer. The thermally equilibrated metal-to-ligand charge-transfer excited state and the reduced form of these compounds do not inject electrons into TiO2. Nanosecond transient absorption measurements demonstrate the formation of an extremely long-lived charge separated state based on equal concentrations of the reduced and oxidized compounds. The results are consistent with a mechanism of ultrafast excited-state injection into TiO2 followed by interfacial electron transfer to a ground-state compound. The quantum yield for this process was found to increase with excitation energy, a behavior attributed to stronger overlap between the excited sensitizer and the semiconductor acceptor states. For example, the quantum yields for [Os(bpy)2(dcbq)]/TiO2 were phi(417 nm) = 0.18 +/- 0.02, phi(532.5 nm) = 0.08 +/- 0.02, and phi(683 nm) = 0.05 +/- 0.01. Electron transfer to yield ground-state products occurs by lateral intermolecular charge transfer. The driving force for charge recombination was in excess of that stored in the photoluminescent excited state. Chronoabsorption measurements indicate that ligand-based intermolecular electron transfer was an order of magnitude faster than metal-centered intermolecular hole transfer. Charge recombination was quantified with the Kohlrausch-Williams-Watts model.     

Luminescent ruthenium(II) polypyridine biotin complexes: synthesis, characterization, photophysical and electrochemical properties, and avidin-binding studies

Two luminescent ruthenium(II) polypyridine complexes containing a biotin moiety [Ru(bpy)(2)(L1)](PF(6))(2) (1) and [Ru(bpy)(2)(L2)](PF(6))(2) (2) (bpy = 2,2'-bipyridine; L1 = 4-(N-((2-biotinamido)ethyl)amido)-4'-methyl-2,2'-bipyridine; L2 = 4-(N-((6-biotinamido)hexyl)amido)-4'-methyl-2,2'-bipyridine) have been synthesized and characterized, and their photophysical and electrochemical properties have been studied. Upon photoexcitation, complexes 1 and 2 display intense and long-lived triplet metal-to-ligand charge-transfer ((3)MLCT) (dpi(Ru) --> pi*(L1 or L2)) emission in fluid solutions at 298 K and in low-temperature glass. We have studied the binding of these ruthenium(II) biotin complexes to avidin by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays, luminescence titrations, competitive assays using native biotin, and quenching experiments using methyl viologen. On the basis of the results of these experiments, a homogeneous competitive assay for biotin has been investigated.     

Proton-promoted oxygen atom transfer vs proton-coupled electron transfer of a non-heme iron(IV)-oxo complex

Sulfoxidation of thioanisoles by a non-heme iron(IV)-oxo complex, [(N4Py)Fe(IV)(O)](2+) (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), was remarkably enhanced by perchloric acid (70% HClO(4)). The observed second-order rate constant (k(obs)) of sulfoxidation of thioaniosoles by [(N4Py)Fe(IV)(O)](2+) increases linearly with increasing concentration of HClO(4) (70%) in acetonitrile (MeCN)at 298 K. In contrast to sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+), the observed second-order rate constant (k(et)) of electron transfer from one-electron reductants such as [Fe(II)(Me(2)bpy)(3)](2+) (Me(2)bpy = 4,4-dimehtyl-2,2'-bipyridine) to [(N4Py)Fe(IV)(O)](2+) increases with increasing concentration of HClO(4), exhibiting second-order dependence on HClO(4) concentration. This indicates that the proton-coupled electron transfer (PCET) involves two protons associated with electron transfer from [Fe(II)(Me(2)bpy)(3)](2+) to [(N4Py)Fe(IV)(O)](2+) to yield [Fe(III)(Me(2)bpy)(3)](3+) and [(N4Py)Fe(III)(OH(2))](3+). The one-electron reduction potential (E(red)) of [(N4Py)Fe(IV)(O)](2+) in the presence of 10 mM HClO(4) (70%) in MeCN is determined to be 1.43 V vs SCE. A plot of E(red) vs log[HClO(4)] also indicates involvement of two protons in the PCET reduction of [(N4Py)Fe(IV)(O)](2+). The PCET driving force dependence of log k(et) is fitted in light of the Marcus theory of outer-sphere electron transfer to afford the reorganization of PCET (λ = 2.74 eV). The comparison of the k(obs) values of acid-promoted sulfoxidation of thioanisoles by [(N4Py)Fe(IV)(O)](2+) with the k(et) values of PCET from one-electron reductants to [(N4Py)Fe(IV)(O)](2+) at the same PCET driving force reveals that the acid-promoted sulfoxidation proceeds by one-step oxygen atom transfer from [(N4Py)Fe(IV)(O)](2+) to thioanisoles rather than outer-sphere PCET.     

Synthesis and spectroscopic characterization of CN-substituted bipyridyl complexes of Ru(II)

A series of ruthenium complexes having the general form [Ru(bpy)(3-n)(CN-Me-bpy)(n)](PF(6))(2) (where bpy = 2,2'-bipyridine, CN-Me-bpy = 4,4'-dicyano-5,5'-dimethyl-2,2'-bipyridine, and n = 1-3 for complexes 1-3, respectively) have been synthesized and characterized using a variety of steady-state and nanosecond time-resolved spectroscopies. Electrochemical measurements indicate that the CN-Me-bpy ligand is significantly easier to reduce than the unsubstituted bipyridine (on the order of ～500 mV), implying that the lowest energy (3)MLCT (metal-to-ligand charge transfer) state will be associated with the CN-Me-bpy ligand(s) in all three compounds. Comparison of the Huang-Rhys factors derived from spectral fitting analyses of the steady state emission spectra of complexes 1-3 suggests all three compounds are characterized by excited-state geometries that are less distorted relative to their ground states as compared to [Ru(bpy)(3)](PF(6))(2); the effect of the more nested ground- and excited-state potentials is reflected in the unusually high radiative quantum yields (13% (1), 27% (2), and 40% (3)) and long (3)MLCT-state room-temperature lifetimes (1.6 μs, 2.6 μs, and 3.5 μs, respectively) for these compounds. Coupling of the π* system into the CN groups is confirmed by nanosecond step-scan IR spectra which reveal a ～40 cm(-1) bathochromic shift of the CN stretching frequency, indicative of a weaker CN bond in the (3)MLCT excited state relative to the ground state. The fact that the shift is the same for complexes 1-3 is evidence that, in all three complexes, the long-lived excited state is localized on a single CN-Me-bpy ligand rather than being delocalized over multiple ligands.     

Photoinduced energy transfer coupled to charge separation in a Ru(II)-Ru(II)-acceptor triad

The bichromophoric system Ru-Ru(C)-PI ([(bpy)3Ru-Ph-Ru(dpb)(Metpy-PI)][PF6]3, where bpy is 2,2'-bipyridine, Hdpb is 1,3-di(2-pyridyl)-benzene, Metpy is 4'-methyl-2,2':6',2' '-terpyridine and PI is pyromellitimide) containing two Ru(II) polypyridyl chromophores with a N6 and a N5C ligand set, respectively, was synthesized and characterized. Its photophysical properties were investigated and compared to those of the monochromophoric cyclometalated complexes Ru(C)-PI ([Ru(dpb)(Metpy-PI)][PF6]), Ru(C)-phi-PI ([Ru(dpb)(ttpy-PI)][PF6], ttpy is 4'-p-tolyl-2,2':6',2' '-terpyridine), Ru(C)-phi ([Ru(dpb)(ttpy)][PF6]), and Ru(C) ([Ru(dpb)(Metpy)][PF6]). Excitation of the Ru(C) unit in the dyads leads to oxidative quenching, forming the Ru(C)(III)-phi-PI*- and Ru(C)(III)-Pl.- charge-separated (CS) states with k(f)(ET) = 7.7 x 10(7) s(-1) (CH3CN, 298 K) in the tolyl-linked Ru(C)-phi-PI and k(f)(ET) = 4.4 x 10(9) s(-1) (CH2Cl2, 298 K) in the methylene-linked Ru(C)-PI. In the Ru-Ru(C)-PI triad, excitation of the Ru(C) chromophore leads to dynamics similar to those in the Ru(C)-PI dyad, generating the Ru(II)-Ru(C)(III)-PI*- CS state, whereas excitation of the Ru unit results in an initial energy transfer (k(EnT) = 4.7 x 10(11) s(-1)) to the cyclometalated Ru(C) unit. Subsequent electron transfer to the PI acceptor results in the formation of the same Ru(II)-Ru(C)(III)-PI*- CS state with k(f)(ET) = 5.6 x 10(9) s(-1) that undergoes rapid recombination with k(b)(ET) = 1 x 10(10) s(-1) (CH2Cl2, 298 K). The fate of the Ru(II)-Ru(C)(III)-PI*- CS state upon a second photoexcitation was studied by pump-pump-probe experiments in an attempt to detect the fully charge-separated Ru(III)-Ru(C)(II)-PI*- state.     

Ligand-localized electron trapping at sensitized semiconductor interfaces

Nanocrystalline (anatase), mesoporous TiO2 thin films were derivatized with [Ru(bpy)2(deebq)](PF6)2 or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine and deebq is 4,4'-diethylester-2,2'-biquinoline. Both compounds bind to the nanocrystalline TiO2 films with typical limiting surface coverages of 7 (+/-2) x 10-8 mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.60 V vs SCE) occurs prior to TiO2 reduction. Steady-state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced compound, MII(deebq-)(bpy)2+/TiO2. Neither the photoluminescent excited states or the reduced forms of these compounds inject electrons efficiently into TiO2. Transient absorption measurements after a approximately 10-ns laser pulse, reveal greater than 80% MLCT excited states and a smaller fraction of extremely long-lived charge-separated state intermediates assigned to equal concentrations of MII(deebq-)(bpy)2+/TiO2 and MIII(deebq)(bpy)23+/TiO2. The results are consistent with a mechanism of ultrafast electron injection followed by ligand-localized trapping on a second compound. The quantum yield for formation of the charge-separated states (phiCSS) is excitation wavelength dependent. With 417 nm excitation, phiCSS(417) = 0.14 +/- 0.03, and this decreases with 532.5 nm excitation, phiCSS(532.5) = 0.08 +/- 0.03, and 683 nm excitation for M = Os, phiCSS(683) = 0.05 +/- 0.01. Electron transfer to yield ground-state products, MII(deebq-)(bpy)2+/TiO2 + MIII(deebq)(bpy)23+/TiO2 --> 2 MII(deebq)(bpy)22+/TiO2, occurs with a driving force of 2.05 eV for Ru/TiO2 and 1.64 eV for Os/TiO2. The dynamics of this process were quantified on a millisecond time scale and were found to follow second-order kinetics. The intermediates are sufficiently long-lived that continued pulsed excitation at 10 Hz leads to high concentrations and the formation of transient images on the semiconductor surface that are easily observed by the naked eye.     

Tuning and switching MLCT phosphorescence of [Ru(bpy)3]2+ complexes with triarylboranes and anions

Four new Ru(II) complexes, [Ru(bpy)(2)(4,4'-BP2bpy)][PF(6)](2) (1), [Ru(t-Bu-bpy)(2)(4,4'-BP2bpy)][PF(6)](2) (2), [Ru(bpy)(2)(5,5'-BP2bpy)][PF(6)](2) (3), and [Ru(t-Bu-bpy)(2)(5,5'-BP2bpy)][PF(6)](2) (4) have been synthesized (where 4,4'-BP2bpy = 4,4'-bis(BMes(2)phenyl)-2,2'-bpy; 5,5'-BP2bpy = 5,5'-bis(BMes(2)phenyl)-2,2'-bpy (4,4'-BP2bpy); and t-Bu-bpy = 4,4'-bis(t-butyl)-2,2'-bipyridine). These new complexes have been fully characterized. The crystal structures of 3 and 4 were determined by single-crystal X-ray diffraction analyses. All four complexes display distinct metal-to-ligand charge transfer (MLCT) phosphorescence that has a similar quantum efficiency as that of [Ru(bpy)(3)][PF(6)](2) under air, but is at a much lower energy. The MLCT phosphorescence of these complexes has been found to be highly sensitive toward anions such as fluoride and cyanide, which switch the MLCT band to higher energy when added. The triarylboron groups in these compounds not only introduce this color switching mechanism, but also play a key role in the phosphorescence color of the complexes.     

9-Oxidophenalenone: a noninnocent β-diketonate ligand?

The redox systems [Ru(L)(bpy)(2)](k), [Ru(L)(2)(bpy)](m), and [Ru(L)(3)](n) containing the potentially redox-active ligand 9-oxidophenalenone = L(-) were investigated by spectroelectrochemistry (UV-vis-near-IR and electron paramagnetic resonance) in conjunction with density functional theory (DFT) calculations. Compounds [Ru(L(-))(bpy)(2)]ClO(4) ([1]ClO(4)) and [Ru(L(-))(2)(bpy)]ClO(4) ([2]ClO(4)) were structurally characterized. In addition to establishing electron-transfer processes involving the Ru(II)/Ru(III)/Ru(IV) and bpy(0)/bpy(?-) couples, evidence for the noninnocent behavior of L(-) was obtained from [Ru(IV)(L(?))(L(-))(bpy)](3+), which exhibits strong near-IR absorption due to ligand-to-ligand charge transfer. In contrast, the lability of the electrogenerated anion [Ru(L)(2)(bpy)](-) is attributed to a resonance situation [Ru(II)(L(?2-))(L(-))(bpy)](-)/[Ru(II)(L(-))(2) (bpy(?-))](-), as suggested by DFT calculations.     

Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes

We report the synthesis of free 1,6,7,12-tetraazaperylene (tape). Tape was obtained from 1,1'-bis-2,7-naphthyridine by potassium promoted cyclization followed by oxidation with air. Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes of the general formulas [Ru(L-L)(2)(tape)](PF(6))(2), [1](PF(6))(2)-[5](PF(6))(2), and [{Ru(L-L)(2)}(2)(μ-tape)](PF(6))(4), [6](PF(6))(4)-[10](PF(6))(4), with{L-L = phen, bpy, dmbpy (4,4'-dimethyl-2,2'-bipyridine), dtbbpy (4,4'-ditertbutyl-2,2'-bipyridine) and tmbpy (4,4'5,5'-tetramethyl-2,2'-bipyridine)}, respectively, were synthesized. The X-ray structures of tape·2CHCl(3) and the mononuclear complexes [Ru(bpy)(2)(tape)](PF(6))(2)·0.5CH(3)CN·0.5toluene, [Ru(dmbpy)(2)(tape)](PF(6))(2)·2toluene and [Ru(dtbbpy)(2)(tape)](PF(6))(2)·3acetone·0.5H(2)O were solved. The UV-vis absorption spectra and the electrochemical behavior of the ruthenium(ii) tape complexes were explored and compared with the data of the analogous dibenzoeilatin (dbneil), 2,2'-bipyrimidine (bpym) and tetrapyrido[3,2-a:2',3'-c:3',2'-h:2',3'-j]phenazin (tpphz) species.     

Triiodide quenching of ruthenium MLCT excited state in solution and on TiO2 surfaces: an alternate pathway for charge recombination

The excited states of [Ru(bpy)2(deeb)](PF6)2, where bpy is 2,2-bipyridine and deeb is 4,4'-(CO2CH2CH3)2-2,2'-bipyridine, were found to be efficiently quenched by triiodide (I3-) in acetonitrile and dichloromethane. In dichloromethane, I3- was found to quench the excited states by static and dynamic mechanisms; Stern-Volmer analysis of the time-resolved and steady-state photoluminescence data produced self-consistent estimates for the I3- + Ru(bpy)2(deeb)2+ <==> [Ru(II)(bpy)2(deeb)2+,(I3-)]+ equilibrium, K = 51,000 M(-1), and the bimolecular quenching rate constant, kq = 4.0 x 10(10) M(-1) s(-1). In acetonitrile, there was no evidence for ion pairing and a dynamic quenching rate constant of k(q) = 4.7 x 10(10) M(-1) s(-1) was calculated. Comparative studies with Ru(bpy)2(deeb)2+ anchored to mesoporous nanocrystalline TiO2 thin films also showed efficient excited-state dynamic quenching by I3- in both acetonitrile and dichloromethane, kq = 1.8 x 10(9) and 3.6 x 10(10) M(-1) s(-1), respectively. No reaction products for the excited-state quenching processes were observed by nanosecond transient absorption measurements from 350 to 800 nm under any experimental conditions. X-ray crystallographic, IR, and Raman data gave evidence for interactions between I3- and the bpy and deeb ligands in the solid state.     

Surprising photochemical reactivity and visible light-driven energy transfer in heterodimetallic complexes

The bis(bidentate) phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane (dppcb) has been used for the synthesis of a series of novel heterodimetallic complexes starting from [Ru(bpy)(2)(dppcb)]X(2) (1; X = PF(6), SbF(6)), so-called dyads, showing surprising photochemical reactivity. They consist of [Ru(bpy)(2)](2+)"antenna" sites absorbing light combined with reactive square-planar metal centres. Thus, irradiating [Ru(bpy)(2)(dppcb)MCl(2)]X(2) (M = Pt, 2; Pd, 3; X = PF(6), SbF(6)) dissolved in CH(3)CN with visible light, produces the unique heterodimetallic compounds [Ru(bpy)(CH(3)CN)(2)(dppcb)MCl(2)]X(2) (M = Pt, 7; Pd, 8; X = PF(6), SbF(6)). In an analogous reaction the separable diastereoisomers (ΔΛ/ΛΔ)- and (ΔΔ/ΛΛ)-[Ru(bpy)(2)(dppcb)Os(bpy)(2)](PF(6))(4) (5/6) lead to [Ru(bpy)(CH(3)CN)(2)(dppcb)Os(bpy)(2)](PF(6))(4) (9), where only the RuP(2)N(4) moiety of 5/6 is photochemically reactive. By contrast, in the case of [Ru(bpy)(2)(dppcb)NiCl(2)]X(2) (4; X = PF(6), SbF(6)) no clean photoreaction is observed. Interestingly, this difference in photochemical behaviour is completely in line with the related photophysical parameters, where 2, 3, and 5/6, but not 4, show long-lived excited states at ambient temperature necessary for this type of photoreaction. Furthermore, the photochemical as well as the photophysical properties of 2-4 are also in accordance with their single crystal X-ray structures presented in this work. It seems likely that differences in "steric pressure" play a major role for these properties. The unique complexes 7-9 are also fully characterized by single-crystal X-ray structure analyses, clearly showing that the stretching vibration modes of the ligand CH(3)CN, present only in 7-9, cannot be directly influenced by "steric pressure". This has dramatic consequences for their photophysical parameters. The trans-[Ru(bpy)(CH(3)CN)(2)](2+) chromophore of 9 acts as efficient "antenna" for visible light-driven energy transfer to the Os-centred "trap" site, resulting in k(en) ≥ 2 × 10(9) s(-1) for the energy transfer. Since electron transfer is made possible by the use of this intervening energy transfer, in dyads like 2-4 highly reactive M(0) species (M = Pt, Pd, Ni) could be generated. These species are not stable in water and M(II) hydride intermediates are usually formed, further reacting with H(+) to give H(2). Thus, derivatives of 3, namely [M(bpy)(2)(dppcb)Pd(bpy)](PF(6))(4) (M = Os, Ru) dissolved in 1:1 (v/v) H(2)O-CH(3)CN produce H(2) during photolysis with visible light.     

Fused donor-acceptor ligands in RuII chemistry: synthesis, electrochemistry and spectroscopy of [Ru(bpy)3-n(TTF-dppz)n](PF6)2.

Three ruthenium(II) polypyridine complexes of general formula [Ru(bpy)(3-n)(TTF-dppz)n](PF6)2 (n=1-3, bpy=2,2'-bipyridine), with one, two or three redox-active TTF-dppz (4',5'-bis(propylthio)tetrathiafulvenyl[i]dipyrido[3,2-a:2',3'-c]phenazine) ligands, were synthesised and fully characterised. Their electrochemical and photophysical properties are reported together with those of the reference compounds [Ru(bpy)3](PF6)2, [Ru(dppz)3](PF6)2 and [Ru(bpy)2(dppz)](PF6)2 and the free TTF-dppz ligand. All three complexes show intraligand charge-transfer (ILCT) fluorescence of the TTF-dppz ligand. Remarkably, the complex with n=1 exhibits luminescence from the Ru(2+)-->dppz metal-to-ligand charge-transfer ((3)MLCT) state, whereas for the other two complexes, a radiationless pathway via electron transfer from a second TTF-dppz ligand quenches the (3)MLCT luminescence. The TTF fragments as electron donors thus induce a ligand-to-ligand charge-separated (LLCS) state of the form TTF-dppz- -Ru(2+)-dppz-TTF(+). The lifetime of this LLCS state is approximately 2.3 micros, which is four orders of magnitude longer than that of 0.4 ns for the ILCT state, because recombination of charges on two different ligands is substantially slower.     

A nuclear isotope effect for interfacial electron transfer: excited-state electron injection from Ru ammine compounds to nanocrystalline TiO2

The coordination compounds Ru(deeb)(NH3)4(PF6)2 and Ru(deeb)(NH2(CH2)2NH2)4(PF6)2, where deeb is 4,4'-(CO2CH2CH3)2-2,2'-bipyridine, were synthesized and attached to optically transparent nanocrystalline (anatase) TiO2 films. The compounds were found to be nonemissive in fluid acetonitrile and when attached to TiO2 with excited-state lifetimes <10 ns. Infrared measurements showed the expected isotopic substitution of the deuterated compounds on TiO2 thin films. A small 10-15 mV shift in the RuIII/II reduction potentials was measured upon deuteration. Metal-to-ligand charge-transfer (MLCT) excitation resulted in interfacial electron transfer into the TiO2 semiconductor with quantum yields that were dependent on the excitation wavelength and deuteration of the ammine ligands. The quantum yields were optimized with blue light excitation (417 nm) and deuterium substitution. In contrast, the kinetic rate constants for charge recombination were insensitive to deuteration and the excitation wavelength. Control experiments with Ru(deeb)(bpy)2(PF6)2 indicated that deuteration of the TiO2 surface alone does not affect the injection or recombination processes. A model is proposed wherein electron injection occurs in competition with vibrational relaxation and/or intersystem crossing of the excited states. Exchange of hydrogen by deuterium slows vibrational relaxation and/or intersystem crossing, resulting in higher injection yields.