Polymers from 12-hydroxymethyltetrahydroabietic acid and its vinyl and acrylate esters

12-Hydroxymethyltetrahydroabietic acid has been homopolymerized by melt condensation and homopolyester has been obtained. Vinyl 12-hydroxymethyltetrahydroabietate has been prepared from 12-hydroxymethyltetrahydroabietic acid by vinyl interchange procedure with vinyl acetate, and has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, and terpolymerized with styrene and acrylonitrile. The acrylate ester of 12-hydroxymethyltetrahydroabietic acid also has been prepared from 12-hydroxymethyltetrahydroabietic acid and acrylyl chloride. The acrylate thus obtained has been homopolymerized and copolymerized with vinyl chloride and vinyl acetate. Polymers thus obtained have been characterized.     

Polymers of the vinyl esters of perchlorocyclopentadiene adducts of petroselinic and oleic acids

Homopolymers of vinyl 5-(1,4,5,6,7,7-hexachloro-3-undecylbicyclo [2.2.1]5-hepten-2-yl)-pentanoate and vinyl 8-(1,4,5,6,7,7-hexachloro-3-octylbicyclo [2.2.1]5-hepten-2-yl)-octanoate were prepared, as well as their copolymers with a vinyl tetrahydroabietate—tetrahydropimarate mixture, vinyl 12-hydroxystearate, and vinyl chloride. The vinyl octanoate—12-hydroxystearate copolymer gave light-weight urethane foams with practically no volume change upon humid aging. The vinyl pentanoate and vinyl octanoate monomers lose hydrogen chloride during polymerization. The vinyl pentanoate homopolymer was hydrolyzed in an attempt to establish the position of the loss of hydrogen chloride. Fractionation of vinyl chloride copolymers of the vinyl petanoate and the vinyl octanoate derivatives showed that they possessed a rather homogeneous composition. Incorporation of the vinyl pentanoate monomer in a poly(vinyl chloride) copolymer imparted some internal plasticization with serious loss of tensile strength.     

Polymers from 12 α-hydroxymethylabiet-7,8-enoic acid and vinyl 12 α-hydroxymethylabiet-7,8-enoate

12 α-Hydroxymethylabiet-7,8-enoic acid has been homopolymerized by melt condensation, and a partially crystalline polyester has been obtained. Vinyl 12 α-hydroxymethylabiet-7,8-enoate has been prepared from 12 α-hydroxymethylabiet-7,8-enoic acid by vinyl interchange with vinyl acetate and has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, butadiene, and acrylonitrile, and terpolymerized with styrene and acrylonitrile. Polymers thus obtained have been characterized.     

Total synthesis of the antiinflammatory and proresolving protectin D1

Stereoselective total synthesis of protectin D1 was completed through construction of the Z,E,E-triene structure by using the Suzuki coupling between the vinyl borane (C13-C22) and the vinyl iodide (C1-C12). The Z-enyne, the acetylene precursor of the vinyl borane was synthesized from optically active γ-TMS allylic alcohol in a straightforward way. On the other hand, the vinyl iodide was prepared by using Wittig reaction between the C8-C12 aldehyde possessing the requisite iodo-olefin moiety and the C1-C7 phosphonium iodide.     

Oxidation of vinyl derivatives of benzimidazole-2-thione

N-Vinylbenzimidazole-2-sulfonic acid, 2-benzimidazolyl vinyl sulfoxide, and 2-benzimidazolyl vinyl sulfone were obtained in high yields by the action of concentrated hydrogen peroxide and acetyl hydroperoxide on N- and S-monovinyl derivatives of benzimidazole-2-thione. N-Vinyl-2-benzimidazolone and a complex mixture of polymeric products are formed in the oxidation of N,S-divinyl-2-mercaptobenzimidazole. It is shown that the reactivity of the sulfur atom depends on the number of vinyl groups and their orientation with respect to the heteroatoms.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1670–1673, December, 1975.     

Reduction of trichloroethylene by outer-sphere electron-transfer agents

A series of well-characterized outer-sphere electron-transfer agents were used to study the reduction of trichloroethylene (TCE). Through comparison of the final product ratios of cis-dichloroethylene (cDCE) to trans-dichloroethylene (tDCE) of the outer-sphere reductants to that observed for vitamin B12, it was found that an outer-sphere electron-transfer mechanism is not the likely major pathway in the reduction of TCE by B12. The results provide kinetic support for a two-step reduction mechanism by outer-sphere reductants that involves both vinyl radicals and vinyl anions. The results suggest that the [cDCE]:[tDCE] ratio can be used as a diagnostic for the mechanism of TCE reduction.     

EFFECT OF VINYL ACETATE CONTENT ON THE MECHANICAL PROPERTIES AND MORPHOLOGICAL STRUCTURES OF POLYPROPYLENE

The effect of vinyl acetate （VA） content in ethylene vinyl acetate （EVA） copolyrner on the mechanical properties of polypropylene was investigated. Three different EVA copolymers with concentrations of 3 wt%, 6 wt%, 9 wt%, 12 wt% and 15 wt%, were blended to polypropylene. The mechanical properties such as yield and tensile strengths, elastic modulus, Izod impact strength, hardness and melt flow index of the blends were investigated. Relationship between type of vinyl acetate and concentrations, mechanical, MFI and morphological properties were explored.     

Theoretical investigations into the intermediacy of chlorinated vinylcobalamins in the reductive dehalogenation of chlorinated ethylenes

The reductive dehalogenation of perchloroethylene and trichloroethylene by vitamin B(12) produces approximately 95% (Z)-dichloroethylene (DCE) and small amounts of (E)-DCE and 1,1-DCE, which are further reduced to ethylene and ethane. Chloroacetylene and acetylene have been detected as intermediates, but not dichloroacetylene. Organocobalamins (RCbls) have been proposed to be intermediates in this process. Density functional theory based approaches were employed to investigate the properties of chlorinated vinylcobalamins and chlorinated vinyl radicals. They reveal that all vinyl radicals studied have reduction potentials more positive (E degrees >or= -0.49) than that of the Co(II)/Co(I) couple of B(12) (E degrees = -0.61 V), indicating that any (chlorinated) vinyl radicals formed in the reductive dehalogenation process should be reduced to the corresponding anions by cob(I)alamin in competition with their combination with Co(II) to yield the corresponding vinylcobalamins. The computed Co-C homolytic bond dissociation enthalpies (BDEs) of the latter complexes range from 33.4 to 45.8 kcal/mol. The substituent effects on the BDEs are affected by the stabilities of the vinyl radicals as well as steric interactions between (Z)-chloro substituents and the corrin ring. The calculated E degrees values of the cobalamin models were within approximately 200 mV of one another since electron attachment is to a corrin ring pi-orbital, whose energy is relatively unaffected by chloride substitution of the vinyl ligand, and all were >500 mV more negative than that of the Co(II)/Co(I) couple of B(12). Reduction of the base-off forms of vinyl- and chlorovinylcobalamin models also involves the corrin pi* orbital, but reduction of the base-off dichlorovinyl- and trichlorovinylcobalamin models occurs with electron attachment to the sigma(Co)(-)(C*) orbital, yielding calculated E degrees values more positive than that of the calculated Co(II)/Co(I) couple of B(12). Thus, cob(I)alamin is expected to reduce these base-off vinyl-Cbls. Heterolytic cleavage of the Co-C bonds is much more favorable than homolysis (>21 kcal/mol) and is significantly more exergonic when coupled to chloride elimination.     

The synthesis of C-13 functionalized pleuromutilins via C-H amidation and subsequent novel rearrangement product

Multi-gram quantities of C-13 functionalized pleuromutilin intermediates were synthesized under mild conditions via C-H amidation chemistry. The initial work was performed using rhodium catalysis. However, the highest yields were achieved using silver catalysis, resulting in stereoselective oxazolidinone formation. The ring closure was performed in the presence of a C-12 vinyl group, which differentiates it from historical methods involving the saturated pleuromutilin skeleton. A highlight of this vinyl template is a unique tetracyclic rearrangement product that can be generated from its treatment with hydrochloric acid and heat.     

Synthesis of poly(vinyl alcohol)-based poly(crown ether)s and permeability of their polymeric membranes

Polymers that contain crown ether moieties at the side chain and are capable of forming rather tough film were synthesized by the polymer reaction of poly(vinyl alcohol) with formyl derivatives of aliphatic crown ethers such as 12-crown-4, 15-crown-5, and 18-crown-6. In the passive transport of alkali metal picrates across the poly(crown ether) membranes the permeation, particularly of alkali metals which tend to form intramolecular sandwich-type complexes with the crown ether rings, was retarded, compared with a poly(vinyl alcohol) membrane. The cation selectivities in the permeation of poly(crown ether) membranes differed significantly from those of poly(vinyl alcohol).     

A short route to dehydro [12] annulenes.

A novel synthesis of dehydro [12] annutenes from 1,2-dibromobenzene is based on selective Pd(0)-Cu(1) coupling reactions of aryl and vinyl halides with tenninal acetylenes.     

A vinyl substitution reaction in fluoroalkenes

Based on the results of CNDO and INDO quantum-chemical calculations, the possibility of a vinyl substitution (along with an addition) upon reaction of perfluoropropylene, perfluoroisobutylene, and trifluorochloroethylene with alcohols, thiols, and amines, and the absence of a similar reaction in the case of tetrafluoroethylene is explained. The calculations allow the prediction that a vinyl substitution should take place in similar reactions of 1,1-di- and trifluoroethylenes, but not with mono- and 1,2-difluoroethylenes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2802–2805, December, 1991.     

Diastereoselective radical hydrogenation of alpha-(1-Hydroxyalkyl)vinyl sulfoxides and sulfones controlled by intramolecular hydrogen bonding

The reaction of (S)-alpha-(1-hydroxyalkyl)vinyl sulfoxides (S)-5 with alkyl radicals and tributyltin hydride gave the addition-hydrogenation products with high diastereoselectivity, whereas the reaction with (R)-alpha-(1-hydroxyalkyl)vinyl sulfoxides (R)-5 resulted in complete recovery of the starting sulfoxides. Stereoselective intramolecular hydrogen bonding between the hydroxy group and the diastereotopic sulfonyl oxygen led to high diastereoselectivity in the radical reaction of alpha-(1-hydroxyethyl)vinyl sulfone 12. An important role of intramolecular hydrogen bonding on the diastereoselectivity as well as the reactivity toward alkyl radicals is discussed.     

Synthesis of 13C and 2H Labeled Vinyl Pyruvate and Hyperpolarization of Pyruvate

The hyperpolarization of nuclear spins has enabled unique applications in chemistry, biophysics, and particularly metabolic imaging. Parahydrogen-induced polarization (PHIP) offers a fast and cost-efficient way of hyperpolarization. Nevertheless, PHIP lags behind dynamic nuclear polarization (DNP), which is already being evaluated in clinical studies. This shortcoming is mainly due to problems in the synthesis of the corresponding PHIP precursor molecules. The most widely used DNP tracer in clinical studies, particularly for the detection of prostate cancer, is 1-¹³C-pyruvate. The ideal derivative for PHIP is the deuterated vinyl ester because the spin physics allows for 100 % polarization. Unfortunately, there is no efficient synthesis for vinyl esters of β-ketocarboxylic acids in general and pyruvate in particular. Here, we present an efficient new method for the preparation of vinyl esters, including ¹³C labeled, fully deuterated vinyl pyruvate using a palladium-catalyzed procedure. Using 50 % enriched parahydrogen and mild reaction conditions, a ¹³C polarization of 12 % was readily achieved; 36 % are expected with 100 % pH₂. Higher polarization values can be potentially achieved with optimized reaction conditions.     

Theoretical investigation of the dissociation dynamics of vibrationally excited vinyl bromide on an ab initio potential-energy surface obtained using modified novelty sampling and feed-forward neural networks

The reaction dynamics of vibrationally excited vinyl bromide have been investigated using classical trajectory methods on a neural network potential surface that is fitted to an ab initio database of 12 122 configuration energies obtained from electronic structure calculations conducted at the MP4(SDQ) level of theory using a 6-31G(d,p) basis set for the carbon and hydrogen atoms and Huzinaga's (43334334) basis set augmented with split outer s and p orbitals (4332143214) and a polarization f orbital with an exponent of 0.5 for the bromine atom. The sampling of the 12-dimensional configuration hyperspace of vinyl bromide prior to execution of the electronic structure calculations is accomplished by combining novelty-sampling methods, chemical intuition, and trajectory sampling on empirical and neural network surfaces. The final potential is obtained using a two-layer feed-forward neural network comprising 38 and 1 neurons, respectively, with hyperbolic tangent sigmoid and linear transfer functions in the hidden and output layers, respectively. The fitting is accomplished using the Levenberg-Marquardt algorithm with early stopping and Bayesian regularization methods to avoid overfitting. The interpolated potentials have a standard deviation from the ab initio results of 0.0578 eV, which is within the range generally regarded as "chemical accuracy" for the purposes of electronic structure calculations. It is shown that the potential surface may be easily and conveniently transferred from one research group to another. The files required for transfer of the vinyl bromide surface can be obtained from the Electronic Physics Auxiliary Publication Service. Total dissociation rate coefficients for vinyl bromide are obtained at five different excitation energies between 4.50 and 6.44 eV. Branching ratios into each of the six open reaction channels are computed at 24 vibrational energies in the range between 4.00 and 6.44 eV. The distribution of vibrational energies in HBr formed via three-center dissociation from vinyl bromide is determined and compared with previous theoretical and experimental results. It is concluded that the combination of ab initio electronic structure calculations, novelty sampling with chemical intuition and trajectories on empirical analytic surfaces, and feed-forward neural networks provides a viable framework in which to execute purely ab initio molecular-dynamics studies on complex systems with multiple open reaction channels.     

Stereocontrolled total synthesis of (+)-concanamycin F: the strategic use of boron-mediated aldol reactions of chiral ketones

A highly stereocontrolled total synthesis of the 18-membered macrolide (+)-concanamycin F, a potent inhibitor of vacuolar ATPases, is described that proceeds in 5.8% yield over 26 steps. The three key fragments, C1-C13 vinyl iodide, C14-C22 vinyl stannane and C23-C28 aldehyde, were efficiently constructed using asymmetric boron-mediated aldol reactions of appropriate chiral ketone building blocks. The nature of the silyl protection of the C7/C9 hydroxyls proved to be critical for achieving macrocyclisation, with TES ethers being superior to a cyclic silylene derivative. Following a Liebeskind-Stille cross-coupling reaction between the C1-C13 vinyl iodide and C14-C22 vinyl stannane fragments to assemble the (12E,14E)-diene, a modified Yamaguchi macrolactonisation delivered the requisite 18-membered macrocyclic core. This advanced intermediate was also obtained by an alternative sequence using an esterification step to connect the C1-C13 and C14-C22 fragments followed by a Pd-catalysed intramolecular Stille reaction to install the (12E,14E)-diene. Conversion of the resulting macrocyclic intermediate into a methyl ketone then enabled a highly diastereoselective Mukaiyama aldol coupling of the derived silyl enol ether with the C13-C28 aldehyde fragment to install the fully elaborated side chain, whereby subsequent global deprotection of the resulting β-hydroxyketone under suitable conditions (TASF followed by p-TsOH) afforded (+)-concanamycin F.     

Sulfur extrusion with tin radical: synthesis of 4',5'-didehydro-5'-deoxy-5'-(tributylstannyl)adenosine, an intermediate for potential inhibitors against S-adenosyl homocysteine hydrolase

A new approach has been developed for the synthesis of potential inhibitors of S-adenosyl-l-homocysteine (AdoHcy) hydrolase. The key intermediate 9-[2,3-bis-O-(tert-butyldimethylsilyl)-5-(Z)-(tributylstannyl)-5-deoxy-beta-d-erythro-pent-4-enofuranosyl]adenine (12) was prepared by sulfur extrusion reaction of 4',5'-didehydro-5'-deoxy-5'-(phenylthio)adenosine (11) with tributyltin radical. It was found that this reaction proceeds stereoselectively, forming 12 irrespective of the geometry of 11. Compound 12 readily underwent iodination, bromination, and chlorination with retention of configuration, whereas fluorination gave both (Z)- and (E)-isomers of vinyl fluoride. Because of the susceptibility of 12 to protodestannylation, the (Z)-vinyl iodide (13), prepared in quantitative yield from 12, was used as a substrate for C-C bond formation. Various types of carbon substituents (phenyl, vinyl, trifluorovinyl, ethynyl, and cyano) were introduced to the 5'-position of the 5-deoxy-beta-d-erythro-pent-4-enofuranosyl structure to open up a new route to potential inhibitors of AdoHcy hydrolase.     

Total synthesis of the anticancer natural product OSW-1

The highly potent anticancer natural saponin OSW-1 has been successfully synthesized from commercially available 5-androsten-3beta-ol-17-one 79 in 10 operations with 28% overall yield. The key steps in the total synthesis included a highly regio- and stereoselective selenium dioxide-mediated allylic oxidation of 80 and a highly stereoselective 1,4-addition of alpha-alkoxy vinyl cuprates 68 to steroid 17(20)-en-16-one 12E to introduce the steroid side chain. This total synthesis demonstrated once again the versatile synthetic applications of alpha-halo vinyl ether chemistry developed in our laboratories.     

A total synthesis of phomactin A

A total synthesis of phomactin A (1) based on a Cr(II)/Ni(II) macrocyclisation from the aldehyde vinyl iodide 11, leading to 12, followed by elaboration of the epoxyketone 16, which then undergoes spontaneous pyran-hemiacetal formation on deprotection, is described.