The reactions of 3-Butyl-1,2-diphenylphosphindole with dimethyl acetylenedicarboxylate

Unlike 1,2,5-triphenylphosphole, 3-butyl-1,2-diphenylphosphindole reacts smoothly with two molecules of dimethyl acetylenedicarboxylate to give the phosphindole oxide, a yellow adduct and a colourless adduct. The case of the reaction is taken to indicate less lone pair interaction with the π-system in phosphindoles than in phospholes. The yellow adduct is shown to be a phosphindolium cyclopentadienylide, i.e. an adduct of the phosphindole and two molecules of the ester less one oxygen atom. The colourless adduct is shown to be a 1:2:1 adduct of the phosphindole, the ester and water and has a benzodihydrophosphonin structure. Mechanisms for the formation of both adducts are proposed. Adducts of this general type were previously unknown in organophosphorus chemistry.     

Studies on the reaction of 1,2-dicarbonyl compounds with dimethyl 3-ketoglutarate. Steric and electronic effects

The steric and electronic influences of substituents attached to the 1,2-dicarbonyl system on the success of the reaction of 1,2- diketones with dimethyl 3-ketoglutarate $\text{2}$ have been examined. It is clear from the reaction of $\text{2}$ with benzil, thienil, furil, and phenanthrenequinone $\text{5}$, respectively, coupled with ¹³C NMR spectroscopy of the reaction intermediates, that steric effects play a major role in the overall success of the reaction to provide $\text{4}$. This is analogous to the situation observed earlier with 1,2-diketones, R-CO-CO-R, where R represented an aliptiatic or alicyclic group.     

A novel bicyclic phosphonium ylide from the reaction of a 1,2-dihydrophosphorin with dimethyl acetylenedicarboxylate.

The reaction of 1,2,5-triphenylphospholium fluorenylide with dimethyl acetylenedicarboxylate gives two 1:1 adducts, one of which is shown by X-ray analysis to have a novel 1-phosphabicyclo[3.2.1]octatriene structure.     

Reactions of 16e CpCo half-sandwich complexes containing a chelating 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolate ligand with ethynylferrocene and dimethyl acetylenedicarboxylate

The reaction of the 16e half-sandwich complex [CpCo(S2C2B10H10)] (1S; Cp: cyclopentadienyl) with ethynylferrocene in CH2Cl2 at ambient temperature leads to [CpCo(S2C2B10H9)-(CH2CFc)] (2S; Fc: ferrocenyl) and 1,2,4-triferrocenylbenzene. In 2S, B substitution occurs at the carborane cage in the position B3/B6 with the formation of a C-B bond. In the presence of the protic solvent MeOH, 2S loses a CpCo fragment to generate [(CH2CFc)(S2C2B10H9)] (3S). On the other hand, 2S can take a free CpCo fragment to form [(CpCo)2(S2C2B9H8)-(CHCFc)] (4S) containing a nido-C2B9 unit. In sharp contrast, [CpCo-(Se2C2B10H10)] (1Se) does not react with the alkyne in CH2Cl2, but in MeOH [(CHCFc)(Se2C2B10H10)] (5Se) is generated without the presence of a CpCo unit. The reaction of 1 with dimethyl acetylenedicarboxylate at ambient temperature leads to insertion compounds [CpCo(E2C2B10H10){(MeO2C)-C=C(CO2Me)}] (6S, E=S; 6 Se, E=Se). Upon heating, 6S rearranges to two geometrical isomers [CpCo(S2C2B10H9){(MeO2C)C=CH(CO2Me)}] (7S) and [CpCo(S2C2B10H9){(MeO2C)-CHC(CO2Me)}] (8S). In both, B-H functionalization takes place at the carborane cage in the position B3/B6, but 7S is a 16e complex with an olefinic unit in a Z configuration, and 8S is an 18e complex containing an alkyl B-CH group. Further treatment of 7 S with dimethyl acetylenedicarboxylate at ambient temperature affords two B-disubstituted complexes at the carborane cage in the positions of the B3 and B6 sites, that is, [CpCo(S2C2-B10H8){(MeO2C)C=CH(CO2Me)}2] (9S) and [CpCo(S2C2B10H8){(MeO2C)-CHC(CO2Me)}{(MeO2C)C=CH-(CO2Me)}] (10S). Compound 9S is a 16e complex with two olefinic units in E/E configurations, whereas 10S is an 18e species containing both an olefinic substituent and an alkyl B--CH unit. The reaction of 7S with methyl acetylenemonocarboxylate at ambient temperature leads to the sole 16e compound [CpCo(S2C2B10H8){CH=CH(CO2Me)}-{(MeO2C)C=CH(CO2Me)}] (11S). In contrast, 6Se does not rearrange. All new complexes 2S-4S, 5Se, 6Se, and 7S-11S were characterized by NMR spectroscopy (1H, 11B, 13C) and X-ray structural analyses were performed for 2S-4S, 5Se, 6Se, and 7S-9S.     

A quantum chemical study on the reaction of 1-aryl-1,2-dihydrophosphinine oxides with dimethyl acetylenedicarboxylate

A β-oxophosphorane/ylide (2a) and an oxaphosphete (3a), the product and the possible intermediate of an inverse Wittig type reaction of 1-(2,4,6-triisopropylphenyl-)1,2-dihydrophosphinine oxide with dimethyl acetylenedicarboxylate were studied by quantum chemical calculations. The reaction of the title reagents following either a traditional [4 + 2] cycloaddition protocol to afford phosphabicyclo[2.2.2]octadiene 5 or a novel route yielding eventually β-oxophosphorane/ylide 2 was evaluated by energy calculations. The mechanism for the formation of intermediate 3a₂ was refined by HF/6-31G* transition state calculations. Analysis of the HOMO-LUMO orbitals of the reagents justified the reactivity experienced.     

Catalytic synthesis of dimethyl sulfide from dimethyl disulfide and methanol

The reaction of dimethyl disulfide with methanol was studied at atmospheric pressure and temperature of 350°C in the presence of catalysts containing acid and basic sites.     

Diastereoselective cis to trans desymmetrization of dimethyl succinates

Meso-succinates, readily available by Diels–Alder cycloaddition of dimethyl maleate or maleic anhydride followed by esterification, can be isomerized quantitatively from the cis to the trans isomers in the presence of lithium alkoxides. The reaction performed with enantiopure chiral lithium alkoxides yields diastereomeric trans-succinates in good yield and selectivity.     

草酸二甲酯气相催化加氢合成乙二醇的研究

采用共沉淀法制备了一系列 CuO/SiO₂ 催化剂,进行草酸二甲酯气相加氢活性评价,分别考察了不同沉淀剂（Na₂CO₃、NH₃·H₂O、NaOH）、催化剂组成以及反应工艺条件对加氢性能的影响。采用N₂ 吸附脱附、N₂O吸附、XRD、TG热重分析、H₂-TPR等手段对催化剂进行表征。结果表明,草酸二甲酯加氢反应活性与Cu⁰有关,提高铜比表面积有利于提高加氢活性。采用以NaOH沉淀剂制备的CuO质量分数为50%的CuO/SiO₂催化剂,在200℃、2MPa、0.07h^-1和氢酯摩尔比为100时,草酸二甲酯转化率可达 98%,乙二醇选择性87%,且催化剂表现出较好的稳定性。     

1,2-oxazine chemistry—I : Synthetic approaches to tetrahydro-1,2-oxazines

The synthesis of a series of N-carbethoxytetrahydro-1,2-oxazines, by the reaction of 1,4-dibromobutane derivatives with N-hydroxyurethane under basic conditions, and their reduction to N-Me derivatives is described. Stereochemical and mechanistic points of interest in these reactions are discussed.     

Synthesis of dimethyl 1,2-dihydroisoquinolines through the reaction of isoquinoline and dimethyl acetylenedicarboxylate in the presence of amides

Isoquinoline reacts smoothly with dimethyl acetylenedicarboxylate (DMAD) in the presence of amides to produce dimethyl 2-[1-[aryl(alkyl)carbonylamino]-2(1H)-isoquinolinyl]-2-butenedioates. Reaction of quinoline with DMAD in the presence of benzamide led to dimethyl 2-[1-[(phenylcarbonyl)amino]-2(1H)-quinolinyl]-2-butenedioate.     

Formation of the corannulene core by nickel-mediated intramolecular coupling of benzyl and benzylidene bromides: a versatile synthesis of dimethyl 1,2-corannulene dicarboxylate

[reaction: see text] A practical synthesis of dimethyl 1,2-corannulene dicarboxylate (5) is reported, with the final ring-forming step achieved by the double intramolecular nickel powder mediated coupling of benzyl and benzylidene bromide groups with 60% isolated yield.     

Organocatalytic asymmetric michael addition of aldehydes to beta-nitroacroleine dimethyl acetal

[Structure: see text] The organocatalytic asymmetric Michael addition of aldehydes to beta-nitroacroleine dimethyl acetal has been studied in detail. The reaction took place with excellent yields and high stereoselectivities when a chiral beta-amino alcohol such as L-prolinol was employed as the catalyst, leaving a formation of highly functionalized enantioenriched compounds containing two differentiated formyl groups together with a nitro moiety.     

Stereoselective 1,2-additions of alpha-alkoxymethyllithiums to aldehydes

[reaction: see text]. A chiral derivative of tributylstannylmethanol, readily prepared from L-valine, undergoes Sn-Li exchange to provide an alpha-alkoxyorganolithium that adds to aldehydes with up to 91:9 dr. The diastereoselectivity depends on the solvent and alkyllithium used for transmetalation. Treatment of adducts with acid allowed recovery of the chiral auxiliary and diol with complete stereochemical integrity.     

Uncatalyzed,green aza-Michael addition of amines to dimethyl maleate

Dimethyl maleate was found to be a very reactive and selective acceptor for the aza-Michael addition in comparison to other commonly used electron-deficient alkenes. It reacts efficiently with a variety of aliphatic amines in complete absence of any catalyst and solvent at room temperature. Under these environmentally-friendly conditions, high yields of selectively mono-adducts were obtained within short reaction times.     

Rhodium-catalyzed addition of aryl boronic acids to 1,2-diketones and 1,2-ketoesters

The metal complex Rh(acac)(CO)₂ in the presence of dicyclohexylphenylphosphine provides a useful catalyst system for the addition of boronic acids to 1,2-diketones and 1,2-ketoesters. The best yields were obtained when the transformation was performed in DME/H₂O at 80 °C with 4 equiv of the boronic acid. The results discussed herein extend the scope of the addition of arylboronic acids to highly activated diketones and ketoesters. The products of the reaction are useful in the synthesis of natural products containing oxygenation next to esters or ketones.     

Reaction of 1,2-trans-glycosyl acetates with phosphorus pentachloride: new efficient approach to 1,2-trans-glycosyl chlorides

Reaction of phosphorus pentachloride with 1,2-trans-glycosyl esters is described. The reaction mechanism presumably involves formation of a tetrachlorophosphonium ion as one of the key reactive intermediates, which can be induced either by Lewis acids or by using acetonitrile as the reaction solvent. Two novel, efficient methods for the synthesis of the thermodynamically unstable glycosyl chlorides were developed based on this reaction.     

1,4-Addition of dichlorocarbene to 1,2-bismethylenecycloheptane

The reaction of dichlorocarbene with 1,2-bismethylenecycloheptane $\text{3}$ yields, besides the 1,2-addition product $\text{4b}$, the 1,4-addition product $\text{6b}$ in a ration 99:1.     

Synthesis of dimethyl heterocyclic‐o‐dicarboxylates using dimethyl acetylenedicarboxylate

Dimethyl acetylenedicarboxylate (DMAD) is a very important and useful reagent for the preparation of dimethyl heterocyclic‐o‐dicarboxylates, which are key intermediates in the synthesis of fused pyridazine derivatives. The synthesis of thiopyranes by the Diels‐Alder reaction of dithiocarboxylate derivatives, synthesis of various cyclazines by [2 + 8] cycloaddition reactions, and synthesis of dimethyl pyrazolo[3,4‐b]pyridine‐5,6‐dicarboxylates and polycyclic heterocycles containing the 1,6‐naphthyridine ring system by the reaction of o‐aminonitrile compounds with DMAD are described here.     

One-pot enol silane formation-Mukaiyama aldol-type addition to dimethyl acetals mediated by TMSOTf

Various ketones, esters, amides, and thioesters add in high yield to dimethyl acetals in the presence of silyl trifluoromethanesulfonates and an amine base. Acetals derived from aryl, unsaturated, and aliphatic aldehydes are all effective substrates. The reaction proceeds in a single reaction flask, with no purification of the intermediate enol silane necessary.