Electronic spectroscopic study of solvation of a ketocyanine dye in ternary solvent mixtures

Solvation characteristics in ternary solvent mixtures have been studied by monitoring the solvent-sensitive electronic absorption band of a ketocyanine dye in two ternary solvent mixtures, water + ethanol + benzene and water + ethanol + cyclohexane, in which one of the pairs are partially miscible. Investigations have been done in a completely miscible region including the binodal curve. The maximum energy of absorption (E) of the solute in a ternary solvent mixture differs significantly from the mole fraction average of the E-values in the component solvents. Results in the corresponding binary solvent mixtures also show a deviation of the E-value from the mole fraction averaged E-values, indicating preferential solvation by a component solvent. The results in ternary solvent mixture have been explained in terms of a realistic model of solvation using the results on binary solvation.     

Use of a solvatochromic probe for study of solvation in ternary solvent mixture

Solvation characteristics of 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridino)phenolate in completely miscible ternary solvent mixtures (viz., methanol + acetone + water, methanol + acetone + benzene, and methanol + chloroform + benzene) have been studied by using an electronic spectroscopic procedure. The transition energy (E) corresponding to the charge-transfer band maximum of the solute in a ternary solvent mixture differs significantly from the average E-values in the component solvents weighted by the mole fraction of the solvents. A two-phase model of solvation has been invoked to explain the results. The excess or deficit of solvent components in the local region of the solute molecule over that in the bulk has been estimated using the knowledge of solvation in binary solvent mixtures.     

The electrical double layer in LiCl and KF methanol + acetone systems

Differential capacity and interfacial tension measurements were carried out on mercury at 25°C for LiCl and KF in methanol+acetone mixtures, the acetone mole fraction being increased up to 0.8. The Gibbs surface excess of acetone ₂¹ and Guggenheim's model surface mole fraction ₂(₁+₂) were compared at the zero charge potential in saturated and diluted (0.01 M) LiCl solutions. The effect of binary solvent composition on some ionic double-layer properties was observed and described in detail.     

Solubility and preferential solvation of some non-steroidal anti-inflammatory drugs in methanol + water mixtures at 298.15 K

The equilibrium solubilities of naproxen (NAP), ketoprofen (KTP), and ibuprofen (IBP) in methanol + water binary mixtures at 298.15 K were determined and the preferential solvation parameters were derived by means of the inverse Kirkwood–Buff integrals (IKBI) method. These drugs are very sensitive to specific solvation effects. The preferential solvation parameters by methanol δx_1,3 are negative in water-rich mixtures but positive in compositions from 0.32 in mole fraction of methanol to pure methanol. It is conjecturable that in the former case the hydrophobic hydration around aromatic rings and/or methyl groups plays a relevant role in the solvation. The higher solvation by methanol in mixtures of similar co-solvent compositions and in methanol-rich mixtures could be explained in terms of the higher basic behaviour of this co-solvent interacting with the hydroxyl group of the drugs. Moreover, drug solubilities were correlated by using the modified nearly ideal binary solvent/Redlich–Kister model obtaining average percentage deviations (APDs) lower than 9.0%.     

Solvatochromism and preferential solvation of Brooker's merocyanine in water–methanol mixtures

The excitation energy of Brooker's merocyanine in water–methanol mixtures shows nonlinear behavior with respect to the mole fraction of methanol, and it was suggested that this behavior is related to preferential solvation by methanol. We investigated the origin of this behavior and its relation to preferential solvation using the three‐dimensional reference interaction site model self‐consistent field method and time‐dependent density functional theory. The calculated excitation energies were in good agreement with the experimental behavior. Analysis of the coordination numbers revealed preferential solvation by methanol. The free energy component analysis implied that solvent reorganization and solvation entropy drive the preferential solvation by methanol, while the direct solute–solvent interaction promotes solvation by water. The difference in the preferential solvation effect on the ground and excited states causes the nonlinear excitation energy shift. © 2017 Wiley Periodicals, Inc.     

Solvatochromism and preferential solvation of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone by UV-vis absorption and laser-induced fluorescence measurements

Solvation characteristics of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone (1) in pure and binary solvent mixtures have been studied by UV-vis absorption spectroscopy and laser-induced fluorescence techniques. The binary solvent mixtures used as CCl(4) (tetrachloromethane)-DMF (N,N-dimethylformamide), AN (acetonitrile)-DMSO (dimethylsulfoxide), CHCl(3) (chloroform)-DMSO, CHCl(3)-MeOH (methanol), and MeOH-DMSO. The longest wavelength band of 1 has been studied in pure solvents as well as in binary solvent mixtures as a function of the bulk mole fraction. The Vis absorption band maxima show an unusual blue shift with increasing solvent polarity. The emission maxima of 1 show changes with varying the pure solvents and the composition in the case of binary solvent mixtures. Non-ideal solvation characteristics are observed in all binary solvent mixtures. It has been observed that the quantity [nu (12)-(X(1)nu (1)+X(2)nu (2))] serves as a measure of the extent of preferential solvation, where nu and X are the position of band maximum in wavenumbers (cm(-1)) and the bulk mole fraction values, respectively. The preferential solvation parameters local mole fraction (X(2)(L)), solvation index (delta(s2)), and exchange constant (k(12)) are evaluated.     

Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Preferential solvation and solvation shell composition of free base and protonated 5, 10, 15, 20-tetrakis(4-sulfonatophenyl)porphyrin in aqueous organic mixed solvents

The solvatochromic properties of the free base and the protonated 5, 10, 15, 20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) were studied in pure water, methanol, ethanol (protic solvents), dimethylsulfoxide, DMSO, (non-protic solvent), and their corresponding aqueous-organic binary mixed solvents. The correlation of the empirical solvent polarity scale (E(T)) values of TPPS with composition of the solvents was analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition and the synergistic effects in preferential solvation of the solute dyes were investigated in terms of both solvent-solvent and solute-solvent interactions and also, the local mole fraction of each solvent composition was calculated in cybotactic region of the probe. The effective mole fraction variation may provide significant physico-chemical insights in the microscopic and molecular level of interactions between TPPS species and the solvent components and therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TPPS. The obtained results from the preferential solvation and solvent-solvent interactions have been successfully applied to explain the variation of equilibrium behavior of protonation of TPPS occurring in aqueous organic mixed solvents of methanol, ethanol and DMSO.     

Solute-solvent and solvent-solvent interactions in the preferential solvation of 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide in 24 binary solvent mixtures

The molar transition energy (E(T)) polarity values for the dye 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide were collected in binary mixtures comprising a hydrogen-bond accepting (HBA) solvent (acetone, acetonitrile, dimethyl sulfoxide (DMSO), and N,N-dimethylformamide (DMF)) and a hydrogen-bond donating (HBD) solvent (water, methanol, ethanol, propan-2-ol, and butan-1-ol). Data referring to mixtures of water with alcohols were also analyzed. These data were used in the study of the preferential solvation of the probe, in terms of both solute-solvent and solvent-solvent interactions. These latter interactions are of importance in explaining the synergistic behavior observed for many mixed solvent systems. All data were successfully fitted to a model based on solvent-exchange equilibria. The E(T) values of the dye dissolved in the solvents show that the position of the solvatochromic absorption band of the dye is dependent on the medium polarity. The solvation of the dye in HBA solvents occurs with a very important contribution from ion-dipole interactions. In HBD solvents, the hydrogen bonding between the dimethylamino group in the dye and the OH group in the solvent plays an important role in the solvation of the dye. The interaction of the hydroxylic solvent with the other component in the mixture can lead to the formation of hydrogen-bonded complexes, which solvate the dye using a lower polar moiety, i.e. alkyl groups in the solvents. The dye has a hydrophobic nature and a dimethylamino group with a minor capability for hydrogen bonding with the medium in comparison with the phenolate group present in Reichardt's pyridiniophenolate. Thus, the probe is able to detect solvent-solvent interactions, which are implicit to the observed synergistic behavior.     

Solubility and preferential solvation of acetaminophen in methanol + water mixtures at 298.15 K

The equilibrium solubility of acetaminophen in methanol + water binary mixtures at 298.15 K was determined and correlated with the Jouyban–Acree model. Preferential solvation parameters by methanol (δx_1,3) were derived from their thermodynamic solution properties by means of the inverse Kirkwood–Buff integrals method. δx_1,3 values are negative in water-rich mixtures but positive in compositions from 0.32 in mole fraction of methanol to pure methanol. It is conjecturable that in the former case, the hydrophobic hydration around non-polar groups plays a relevant role in the solvation. The higher solvation by methanol in mixtures of similar cosolvent compositions and methanol-rich mixtures could be explained in terms of the higher basic behavior of this cosolvent.     

Solubility and preferential solvation of phenacetin in methanol + water mixtures at 298.15 K

The mole fraction solubility of phenacetin (PNC) in methanol + water binary solvent mixtures at 298.15 K was determined along with density of the saturated solutions. All these solubility values were correlated with the Jouyban–Acree model. Preferential solvation parameters of PNC by methanol (δx_1,3) were derived from their thermodynamic solution properties using the inverse Kirkwood–Buff integrals (IKBI) method. δx_1,3 values are negative in water-rich mixtures but positive in methanol mole fraction of >0.32. It is conjecturable that in the former case the hydrophobic hydration around non-polar groups of PNC plays a relevant role in the solvation. The higher solvation by methanol in mixtures of similar cosolvent compositions and methanol-rich mixtures could be explained in terms of the higher basic behaviour of methanol.     

Solvatochromic and thermochromic shifts of electronic spectra of polar solute molecules in a mixture of polar and nonpolar solvent; the role of solvent-solvent interactions

A theoretical model is proposed to describe the influence of the concentration of a polar solvent and the temperature of a solution on the electronic spectra of a polar solute in a binary solvent mixture. It is shown that the interaction between molecules of the polar solvent in the first solvation shell makes the significant contribution to the formation of absorption and fluorescence bands of the solute. An experimental study of solvatochromic and thermochromic shifts of steady-state fluorescence spectra of 3-amino-N-methylphthalimide in decalin--propanol mixture for different values of propanol mole fraction is carried out. Good qualitative agreement between the experimental data and calculation results is observed.     

Preferential solvation of some antiepileptic drugs in {cosolvent (1) + water (2)} mixtures at 298.15 K

The solubility of lamotrigine (LTG), clonazepam (CZP) and diazepam (DZP) in some {cosolvent (1) + water (2)} mixtures expressed in mole fraction at 298.15 K was calculated from reported solubility values expressed in molarity by using the densities of the saturated solutions. Aqueous binary mixtures of ethanol, propylene glycol and N-methyl-2-pyrrolidone were considered. From mole fraction solubilities and some thermodynamic properties of the solvent mixtures, the preferential solvation of these drugs by both solvents in the mixtures was analysed by using the inverse Kirkwood–Buff integrals. It is observed that LTG, CZP and DZP are preferentially solvated by water in water-rich mixtures in all the three binary systems analysed. In {ethanol (1) + water (2)} mixtures, preferential solvation by water is also observed in ethanol-rich mixtures. Nevertheless, in {propylene glycol (1) + water (2)} and {N-methyl-2-pyrrolidone (1) + water (2)} mixtures preferential solvation by the cosolvent was observed in cosolvent-rich mixtures.     

First study on the thermo-solvatochromism in aqueous 1-(1-Butyl)-3-methylimidazolium tetrafluoroborate: a comparison between the solvation by an ionic liquid and by aqueous alcohols

The thermo-solvatochromic behaviors of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, RB; 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB; 2,6-dibromo-4-[( E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr 2; 2,6-dibromo-4-[( E)-2-(1-n-octylpyridinium-4-yl)ethenyl] phenolate, OcPMBr 2, have been investigated in binary mixtures of the ionic liquid, IL, 1-(1-butyl)-3-methylimidazolium tetrafluorborate, [BuMeIm][BF 4], and water (W), in the temperature range from 10 to 60 degrees C. Plots of the empirical solvent polarities, E T (probe) in kcal mol (-1), versus the mole fraction of water in the binary mixture, chi w, showed nonlinear, i.e., nonideal behavior. Solvation by these IL-W mixtures shows the following similarities to that by aqueous aliphatic alcohols: The same solvation model can be conveniently employed to treat the data obtained; it is based on the presence in the system-bulk medium and probe solvation shell of IL, W, and the "complex" solvent 1:1 IL-W. The origin of the nonideal solvation behavior appears to be the same, preferential solvation of the probe, in particular by the complex solvent. The strength of association of the IL-W complex, and the polarity of the IL are situated between the corresponding values of aqueous methanol and aqueous ethanol. Temperature increase causes a gradual desolvation of all probes employed. A difference between solvation by IL-W and aqueous alcohols is that probe-solvent hydrophobic interactions appear to play a minor role in case of the former mixture, probably because solvation is dominated by hydrogen-bonding and Coulombic interactions between the ions of the IL and the zwitterionic probes.     

Statistical mixture design investigation of fractionated and total extracts from Erythrina speciosa Andrews leaves

The simplex centroid mixture design for the ethanol, dichloromethane, hexane and acetone solvents has been applied to the extraction of crude mass and the fiber, organic, neutral and basic fractions as well as the fractionation residues of Erythrina speciosa Andrews leaves. Binary and ternary synergic solvent interactions are seen to provide dominant contributions to the extraction of both crude mass and all the fractions. Quadratic and special cubic mixture models precisely predict the extracted quantities of each fraction and the residue as a function of the proportions of the four solvents. Different solvent mixtures are found to be the most efficient extractors for the different fractions: binary dichloromethane‐hexane mixtures for the fiber fraction, ternary ethanol‐dichloromethane‐acetone mixtures for the neutral fraction, binary ethanol‐dichloromethane mixtures for the organic fraction, crude extract and residue values and ternary ethanol‐dichloromethane‐hexane mixtures for the basic fraction. Principal component analysis shows that the ethanol‐dichloromethane mixtures are important for extracting large quantities of the basic and organic fractions as well as of the residue and crude masses.     

Effect of tetrahydrofuran on the conductance and ion-pairing of hydrogen chloride in wet and dry methanol mixtures

The molar conductance of dilute solutions of HCl in wet (68.5% methanol + 31.5% tetrahydrofurane mixtures at 25°C have been measured. The data were analyzed using the Fuoss-Hsia equation to calculate the infinite dilution molar conductances and association constants. The trend of the limiting conductances in these mixtures as a function of the water content shows, once more, the peculiar minimum due to the anomalous proton conductance mechanism. From these data the limiting molar conductance in the anhydrous binary solvent system was evaluated. The percentage excess proton mobility with respect to potassium ion has also been determined. All these data are compared to those found in a binary isodielectric methanol mixture containing as cosolvent 1,4-dioxane. This comparison shows that proton mobilities are very similar in both solvent mixtures. The dielectric constants, refractive indices, viscosities and densities of the methanol-tetrahydrofuran mixtures in the whole mole fraction range have been measured and are reported. An analysis of the excess molar volumes and viscosities shows a slight deviation of this system from ideality.     

Solvatochromism in Binary Solvent Mixtures by Means of a Penta‐tert‐butyl Pyridinium N‐Phenolate Betaine Dye

The solvatochromic behavior of a penta‐tert‐butyl prydinium N‐phenolate betaine dye was studied using UV‐visible spectrophotometry in several binary mixture solvents. The solvent polarity parameter, E_T (1) (kcal. mol^?1) was calculated from the position of the longest‐wavelength intramolecular charge transfer absorption band of this penta‐tert‐butyl betaine dye. For binary solvent mixtures, all plots of E_T (1) versus the mole fraction of a more polar component are nonlinear owing to preferential solvation of the probe by one component of the binary solvent mixture. In the computation of E_T (1) it was assumed that the two solvents mixed interact to form a common structure with an E_T (1) value not always intermediate between those of the two solvents mixed. The results obtained are explained by the strong synergism observed for some of the binary mixtures with strong hydrogen bond donors (HBD) solvents such as alcohols.     

Merocyanine solvatochromic dyes in the study of synergistic effects in mixtures of chloroform with hydrogen-bond accepting solvents

The molar transition energy (E(T)) polarity values for the solvatochromic probes 2,6-diphenyl-4-(2,4,6-triphenylpyridinium)phenolate (1), 4[(1-methyl-4-(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2), and 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide (3) were collected in binary mixtures comprising chloroform and a hydrogen-bond accepting (HBA) solvent [dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), acetone or acetonitrile], aiming to investigate the ability of the chlorinated component to act as hydrogen-bond donating (HBD) solvent. Plots of E(T) as a function of X(2), the mole fraction of chloroform, were obtained and the data were analysed to investigate the preferential solvation (PS) of each probe in terms of both solute-solvent and solvent-solvent interactions. For dyes 1 and 2 a strong synergistic behavior was observed for all mixtures studied, indicating that the dyes are preferentially solvated by complexes formed through hydrogen bonding between chloroform and the HBA component in the mixtures. A study of 1 in deuterated chloroform with an HBA component (DMF and DMA) demonstrated that while almost no differences occur with the DMF mixtures, the presence of deuterated chloroform in its mixtures with DMA increases the synergistic effect, suggesting that it interacts more strongly with DMA, making its mixtures more polar. These data were successfully fitted to a model based on solvent-exchange equilibria. The features of the mixtures with dye 3 revealed a very different profile in comparison with the other two dyes, which suggests that in mixtures containing chloroform, the microenvironment of the dye seems to be important in determining the contribution of the structure resonances responsible for the stability of the dye.     

Dynamical response in methanol–chloroform binary solvent mixture over fs–μs time regime

The present study elucidates the extended nature of the weak interaction between methanol and chloroform in its mixture using steady-state, ultrafast and single molecule spectroscopic methods. UV–vis absorption spectroscopy using a solvatochromic dye indicates a synergistic solvation in the methanol–chloroform binary solvent mixture, which causes the solvatochromic dye to sense increased polarity compared to the bulk counterparts. Such synergism was not observed in the emission study and is explained by the weak nature of the interaction between methanol and chloroform. Fluorescence anisotropy and single molecule fluorescence spectroscopy are employed to understand the nature of such weak interaction on femtosecond to microsecond time scale. Retardation of both the rotational and translational diffusion of the reporter molecule indicates that the observed weak interaction is extended over large dimension in the condensed phase.     

The effect of carbonyl carbon atom replacement in acetone molecule (ACN) by sulfur atom (DMSO)

The enthalpies of solution of cyclic ethers: 1,4-dioxane, 12-crown-4 (12C4), and 18-crown-6 (18C6) in water–acetone mixtures have been measured within the whole mole fraction range at 298.15 K. Based on the obtained data, the effect of base–acid properties of water–acetone mixtures on the solution enthalpy of cyclic ethers in this mixed solvent has been analyzed. The strong dependence of the enthalpy of solution (solvation) of cyclic ethers on basic properties of mixed solvent has been observed. The effects of carbonyl atom replacement in acetone (ACN) molecule by sulfur atom (DMSO molecule) and base–acid properties of mixed solvent on the solvation process of cyclic ethers have been analyzed.