螺旋波激发甲烷等离子体光谱诊断

利用螺旋波激发等离子体化学气相沉积(LPP-CVD)技术,以甲烷和氦气为反应气体产生等离子体.通过采集到甲烷的可见光到紫外发射光谱,对甲烷等离子体进行原位诊断,发现存在CH、Ha及Hβ等碎片粒子的光辐射,同时,分析了不同入射功率、气压下CH粒子以及Hβ、Hγ的相对强度变化情况.结果表明:CH粒子的相对强度随着射频功率是先增大而后减小,随工作气压的增大而逐渐减小;随气压及功率的增加,Hβ、Hγ相对强度变化的总体趋势都是先增加而后减小的.     

CH4/H2和CH4/He体系等离子体发射光谱分析

 在CH₄/H₂和CH₄/He和CH₄/He两种系统中,利用光学发射谱技术对螺旋波放电产生低压甲烷等离子体内活性粒子的光学发射特征进行了原位诊断。在实验中,两种体系下同时都测得的主要荷电粒子为CH,Ha,Hb,Hg以及H2等。研究了各实验参数对这些活性粒子CH, Ha,Hb以及Hg的发射光谱强度的影响。结果表明：在CH₄/H₂体系下,随着射频功率的增大,Ha,Hb,Hg以及CH基团的相对强度都随着增加,而当放电气压变化时它们都呈现先增大而后减小的趋势。在CH₄/He体系下,随射频功率的增加,Ha,Hb,Hg以及CH相对强度变化的总体趋势也都是先增加而后减小,当工作气压增加时,Ha,Hb以及Hg的相对强度变化也是呈现先增大而后减小,但CH基团的相对强度却是逐渐减小的;这些结果为等离子体沉积各种薄膜过程的理解及制备工艺参数的调整提供了参考。     

ICP等离子体鞘层附近区域发光光谱特性分析

为了独立控制鞘层附近区域离子密度和离子能最分布,采用光发射谱(OES)测量技术,对不同射频功率、放电气压和基底偏压下感应耦合等离子体鞘层附近区域辉光特性进行了研究.原子谱线和离子谱线特性分析表明,在鞘层附近区域感应耦合等离子体具有较高的离子密度和较低的电子温度.改变放电气压和射频功率,对得到的光谱特性分析表明,鞘层附近区域离子密度随射频功率的增大而线性增大,在低压下随气压的升高而增大.低激发电位原子谱线强度增加迅速,高激发电位原子谱线强度增加缓慢,而离子谱线强度增加很不明显.改变基底直流偏压,对得到的发射光谱强度变化分析表明,谱线强度随基底正偏压的增加而增大.随着基底负偏压的加入,谱线强度先减小而后增大;直流偏压为-30 V时,光谱强度最弱.快速离子和电子是引起Ar激发和电离过程的主要能量来源.     

采用发射光谱和朗缪尔探针诊断低温低压氢等离子体

 使用发射光谱诊断法和Langmuir探针诊断法,测量了螺旋波激发等离子体化学气相沉积装置中产生的氢等离子体的发射光谱和电流-电压曲线。运用日冕模型和Druyvestey方法,对不同放电参数条件下激发态氢原子密度﹑等离子体密度及电子能量分布的变化规律进行了研究。结果表明：激发态氢原子密度随射频功率增大而增大,随工作气压的增大先增大,后缓慢下降。等离子体密度随射频功率增大线性增大,随工作气压的增加也是先增大,出现峰值后缓慢下降。电子平均能量随射频功率的变化是先增大,后达到平衡;随着工作气压的增大逐渐减小。两种诊断方法得到的结果基本相符。在低温低压等离子诊断中,两种诊断方法结合使用,可以得到更准确和更多的等离子体信息。     

使用发射光谱对感应耦合CF4/CH4等离子体中C2基团形成机理的研究

利用强度标定的发射光谱法,研究了感应耦合CF4/CH4等离子体中空间基团的相对密度随宏观条件(射频输入功率、气压和流量比)的变化情况.研究表明:在所研究的碳氟/碳氢混合气体放电等离子体中除了具有丰富的CF,CF2,CH,H和F等活性基团外,还同时存在着C2基团,其相对密度随着放电功率的提高而增加;随着气压的上升呈现倒"U"型的变化.C2随流量比R(R=[CH4]/{[CH4]+[CF4]})的变化不是单调的,其相对密度在R=7.5％时存在一个极大值,并随着R进一步增加而减弱,然后趋于一个稳定值.根据各基团相对密度的变化规律,认为等离子体中CF和CH基团的气相反应(CF+CH→C2+HF)是C2基团产生的主要途径,并提出了形成C2的基团碰撞的活化反应模型,据此进行的模拟计算的结果与实验相符.     

MPCVD�м���������巢������о�

在微波化学气相沉积装置上采用微波激发氢气甲烷体系等离子体,通过光学多道分析仪采集等离子的发射光谱.实验表明,甲烷在等离子体中的裂解产物主要以CH,CH-,C2基团的形式存在.这些基团的发射光谱强度主要受放电压强和放电功率的影响.随着微波功率的增加甲烷基团发射光谱强度呈增长的趋势;而随着放电压强的增加则是先增大,后减小.这些实验结果对于理解微波等离子体化学气相沉积(MPCVD)中各种反应过程,调整薄膜制备工艺提供了参考.     

低压氢等离子体发光光谱

本实验使用2.45 GHz微波(100～200 W)激励产生低压(1～4 kPa)氢等离子体,通过光纤光谱仪探测氢等离子体的发射光谱,并分析了特征谱线分布及谱线强度随压强、功率的变化情况,计算了氢等离子体的电子激发温度.实验结果表明,压强由1 kPa增加至4 kPa,谱线强度减小;功率由100 W增大至200 W,谱线强度增大.随着压强的增大,电子激发温度减小或先减小后增大.     

使用发射光谱对感应耦合CF4/CH4等离子体中C2基团形成机理的研究

利用强度标定的发射光谱法，研究了感应耦合CF4₄/CH4₄等离 子体中空间基团的 相对密度随宏观条件（射频输入功率、气压和流量比）的变化情况. 研究表明：在所研究的 碳氟/碳氢混合气体放电等离子体中除了具有丰富的CF，CF2₂，CH，H和F等活 性基团外 ，还同时存在着C2₂基团，其相对密度随着放电功率的提高而增加；随着气压 的上升呈 现倒“U”型的变化. C2₂随流量比R（R=［CH4 _{关键词： 发射光谱 感应耦合等离子体 2}基团')" href="#">C2₂基团     

MPCVD等离子体的发射光谱研究

在2.45 GHz, 800 W微波等离子体化学气相沉积装置上,利用发射光谱对CH₄/H₂等离子体进行在线诊断,分析了等离子体中存在的基团,研究了甲烷浓度对各基团浓度及基团的空间分布的影响。结果表明：等离子体中存在CH, H_α, H_β, H_γ, C₂ 基团和Mo杂质原子,随着甲烷浓度的升高,各基团的发射光谱强度均有增加,其中C₂基团强度显著增加。CH与H_α基团的发射光谱强度比值随甲烷浓度的增加变化不大,而C₂与H_α基团的发射光谱强度的比值随甲烷浓度的增加而显著增大。另外,甲烷浓度的增加使得等离子体中各基团在空间分布的均匀性变差。     

VHF等离子体光发射谱(OES)的在线监测

采用光发射谱(OES)测量技术，对不同制备条件下的甚高频(VHF)等离子体辉光进行了在线监 测.实验表明，VHF等离子体中特征发光峰(Si，SiH,H_α,H^*_β 等)的强度较常规的射 频(RF)等离子体明显增强，并且在制备μc-Si：H的工艺条件下(H稀释度R(H₂/S iH₄)=23 )，随激发频率的增加而增大，这些发光峰的变化趋势与材料沉积速率的变化规律较相似.Si H峰等的强度随气压的变化则因硅烷H稀释度及功率的不同而异：高H稀释(R=23)时，SiH峰强 度在低辉光功率下随反应气压的增大单调下降，在高辉光功率下随气压的变化呈现类高斯规 律；低H稀释(R=5．7)时， SiH峰随气压的变化基本上是单调下降的，下降速率也与功率有 关，这些结果表明，VHF-PECVD制备μc-Si：H和a-Si：H的反应动力学过程存在较大差异.此 外，随着激发功率的增大，Si，SiH峰都先迅速增大然后趋于饱和，并且随着H稀释率的增大 ，将更快呈现饱和现象.通过对OES结果的分析与讨论可知，VHF-PECVD技术沉积硅基薄膜可 以有效提高沉积速率，而且，硅基薄膜的沉积速率的进一步提高需要综合考虑H稀释度、气 压和功率等的匹配与优化. 关键词： 甚高频等离子体化学气相沉积 氢化硅薄膜 光发射谱     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.