Asymmetric allylation of aldehydes with allyltrichlorosilane using aza-paracyclophane-oxazoline-N-oxide catalysts

Novel aza-paracyclophane-oxazoline catalysts 4, 5 were produced from Vögtle’s R_p-2-cyano-aza-paraclycophane and amino alcohols reacted with zinc chloride followed by m-chloroperbenzoic acid. 4′-Benzyl and tert-butyl-S and R-oxazoline variants were produced and explored as catalysts for asymmetric allylation of aldehydes using trichloroallylsilane. With R_p,S-4a (R = tert-butyl) (1.5 mol %) aromatic aldehydes reacted with high yields and selectivities, as with benzaldehyde (95%, 93% ee). R_p,S-4b (R = benzyl) was superior with dihydrocinnamaldehyde (77%, 85% ee).     

4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].     

Titanium (IV) complexes based on substituted 2-[(2-hydroxyethyl)]aminophenols

Novel substituted 2-[(2-hydroxyethyl)]aminophenols, MeN(CHR¹CR²R³OH)(C₆H₄-o-OH) (2-5), were synthesized by the reaction of 2-methylaminophenol with corresponding oxiranes. Titano-spiro-bis(ocanes) [MeN(CHR¹CR²R³O)(C₆H₄-o-O)]₂Ti 6-9 (2, 6, R¹ = H, R² = R³ = Me; 3, 7, R¹ = R² = Ph (treo-), R³ = H; 4, 8, R¹ = Ph, R² = R³ = H; 5, 9, R¹ = R² = H, R³ = Ph) based on [ONO]-ligands have been synthesized. The obtained compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The complex [Ti(μ²-O){O-o-C₆H₄}{μ²-CMe₂CH₂}NMe]₆ (10) was obtained by controlled hydrolysis of 6. Molecular structure of 10 was determined by X-ray structure analysis.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

Solubility of HFCs in lower alcohols

This work is inserted in a research program that consists mainly in the experimental and theoretical study of the effect of association between solute and solvent molecules in the solubility of gases in liquids.The solubilities of hydrofluorocarbons, HFCs, (CH₃F, CH₂F₂, CHF₃) in lower alcohols (methanol, ethanol, 1-propanol, 1-butanol) have been determined in the temperature range [284, 313] K, at atmospheric pressure. An automated apparatus based on Ben-Naim-Baer and Tominaga et al. designs was used, which provides an accuracy of 0.6%. A precision of the same order of magnitude was achieved.To represent the temperature dependence of the mole fraction solubilities, the equation R ln x₂ = A + B/T + C ln T was used. From this equation, the experimental Gibbs energies, enthalpies and entropies of solution at 298 K and 1 atm partial pressure of the gas, were calculated.A semiempirical correlation has been developed between the solubilities of HFCs in alcohols at 298 K and the Gutmann acceptor number of solvents, AN, and reduced dipole moment of the gases, μ*.     

Crystal chemistry and crystallography of the SrR2CuO5 (R=lanthanides) phases

The crystal chemistry and crystallography of the compounds SrR₂CuO₅ (Sr-121, R=lanthanides) were investigated using the powder X-ray Rietveld refinement technique. Among the 11 compositions studied, only R=Dy and Ho formed the stable SrR₂CuO₅ phase. SrR₂CuO₅ was found to be isostructural with the “green phase”, BaR₂CuO₅. The basic structure is orthorhombic with space group Pnma. The lattice parameters for SrDyCuO₅ are a=12.08080(6) Å, b=5.60421(2) Å, c=7.12971(3) Å, V=482.705(4) Å³, and Z=8; and for the Ho analog are a=12.03727(12) Å, b=5.58947(7) Å, c=7.10169(7) Å, V=477.816(9) Å³, and Z=8. In the SrR₂CuO₅ structure, each R is surrounded by seven oxygen atoms, forming a monocapped trigonal prism (RO₇). The isolated CuO₅ group forms a distorted square pyramid. Consecutive layers of prisms are stacked in the b-direction. Bond valence calculations imply that residual strain is largely responsible for the narrow stability of the SrR₂CuO₅ phases with R=Dy and Ho only. X-ray powder reference diffraction patterns for SrDy₂CuO₅ and SrHo₂CuO₅ were determined.     

Chiral terpene auxiliaries. Part 1: Highly enantioselective reduction of ketones with borane catalyzed by an oxazaborolidine derived from (−)-β-pinene

(1R,2S,3R,5R)-3-Amino-6,6-dimethyl-2-hydroxybicyclo[3.1.1]heptane was synthesized in three steps from (−)-β-pinene. It was used for the in situ generation of a B-methoxy-oxazaborolidine catalyst for the asymmetric reduction of alkyl-aryl ketones with borane-dimethyl sulfide complex. In the presence of 3 mol % of the catalyst, the product alcohols were obtained in high yields and with enantiomeric excesses in the range of 93-98%.     

High-pressure synthesis and structural characterization of three new polyphosphides, α-SrP3, BaP8, and LaP5

Three novel metal polyphosphides, α-SrP₃, BaP₈, and LaP₅, were prepared in BN crucibles by the reaction of the respective stoichiometric mixtures under a high pressure of 3 GPa at 950-1000°C. Their crystal structures were determined from single-crystal X-ray data (α-SrP₃: space group C2/m, a=9.199(6) Å, b=7.288(3) Å, c=5.690(3) Å, β=113.45(4)°, Z=4, R₁/wR₂=0.0684/0.1180 for 471 observed reflections and 22 variables; BaP₈: space group P−1, a=6.762(2) Å, b=7.233(2) Å, c=8.567(2) Å, α=86.32(2)°, β=84.31(2)°, γ=70.40(2)°, Z=2, R₁/wR₂=0.0476/0.1255 for 2702 observed reflections and 82 variables; LaP₅: space group P2₁/m, a=4.885(1) Å, b=9.673(3) Å, c=5.577(2) Å, β=105.32(2)°, Z=2, R₁/wR₂=0.0391/0.1034 for 1272 observed reflections and 31 variables). α-SrP₃ is isostructural with SrAs₃ and the crystal structure consists of two-dimensional puckered polyanionic layers _∞²[P₃]²⁻ that stack along the c-axis yielding channels occupied by Sr²⁺ counterions. BaP₈ crystallizes in a new structure type which contains a three-dimensional infinite polyanionic framework _∞³[P₃]²⁻, with large channels hosting the barium cations. LaP₅ is a layered compound containing _∞²[P₅]³⁻ polyanionic layers separated by La³⁺ ions. All three compounds exhibit expected diamagnetic behaviors.     

Structure and electron density analysis of electrochemically and chemically delithiated LiCoO2 single crystals

Single crystals of Li_0.68CoO₂, Li_0.48CoO₂, and Li_0.35CoO₂ were successfully synthesized for the first time by means of electrochemical and chemical delithiation processes using LiCoO₂ single crystals as a parent compound. A single-crystal X-ray diffraction study confirmed the trigonal R3¯m space group and the hexagonal lattice parameters a=2.8107(5) Å, c=14.2235(6) Å, and c/a=5.060 for Li_0.68CoO₂; a=2.8090(15) Å, c=14.3890(17) Å, and c/a=5.122 for Li_0.48CoO₂; and a=2.8070(12) Å, c=14.4359(14) Å, and c/a=5.143 for Li_0.35CoO₂. The crystal structures were refined to the conventional values R=1.99% and wR=1.88% for Li_0.68CoO₂; R=2.40% and wR=2.58% for Li_0.48CoO₂; and R=2.63% and wR=2.56% for Li_0.35CoO₂. The oxygen-oxygen contact distance in the CoO₆ octahedron was determined to be shortened by the delithiation from 2.6180(9) Å in LiCoO₂ to 2.5385(15) Å in Li_0.35CoO₂. The electron density distributions of these Li_xCoO₂ crystals were analyzed by the maximum entropy method (MEM) using the present single-crystal X-ray diffraction data at 300 K. From the results of the single-crystal MEM, strong covalent bonding was clearly visible between the Co and O atoms, while no bonding was found around the Li atoms in these compounds. The gradual decrease in the electron density at the Li site upon delithiation could be precisely analyzed.     

Dynamic mechanical and thermal behavior of liquid-crystalline polybutadiene-diols with mesogenic groups in side chains

Liquid-crystalline polybutadiene-diols (LCPBDs) with the comb-like architecture were synthesized by reaction of a LC thiol with the double bonds of telechelic HO-terminated polybutadiene (PBD). LCPBDs with various initial molar ratios of thiol to double bonds of PBD, R₀, in the range from 0.15 to 1, were prepared by the radical reaction at temperature 60 °C for 48 h. The experimentally obtained degree of modification, R_e, after the reaction and purification, was determined from elemental analysis - from the amount of sulphur bounded in LCPBDs, GPC and from ¹H NMR spectra. The physical properties were investigated by differential scanning calorimetry and dynamic mechanical spectroscopy. With increasing R_e ratio the glass transition temperature of LCPBDs, T_g, increases from ∼ − 45 °C (neat PBD) to ∼20 °C (R_e ∼ 0.5). LC transition starts at R_e ∼ 0.27 (the transition temperature T_m ∼ 27 °C). With increasing R_e temperature T_m increases and for R_e ∼ 0.5 reaches the value T_m ∼ 74 °C; at the same time also the change in enthalpy at LC transition increases. The LC transition could be detected also by the dynamic mechanical spectroscopy; especially shape and position of mechanical functions on frequency and free volume parameters strongly depend on degree of modification.     

Synthesis, structure and physicochemical characterization of a noncentrosymmetric, quaternary thiostannate: EuCu2SnS4

EuCu₂SnS₄ was prepared by a stoichiometric combination of the elements heated to 700 °C for 125 h. The structure was determined by single crystal X-ray diffraction methods. The compound crystallizes in the noncentrosymmetric, orthorhombic space group Ama2 with a=10.4793(1) Å, b=10.3610(2) Å, c=6.4015(1) Å, Z=4, R1=0.99% and wR2=2.37%. The structure type is that of SrCu₂GeSe₄. The structure can be described as a three-dimensional network built from near perfect SnS₄ and distorted CuS₄ tetrahedra together with EuS₈ square antiprisms. The dark red compound is a semiconductor with an optical bandgap of 1.85 eV.     

Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

Phospha(III)guanidinate complexes of titanium(IV) and zirconium(IV) amides

Two procedures for the synthesis of group 4 phosphaguanidine compounds M(R₂PC{NR′}₂)(NR″₂)₃ (M = Ti, Zr; R = Ph, Cy; R′ = ⁱPr, Cy; R″ = Me, Et) are described. Spectroscopic characterization indicated symmetrical bonding of the phosphaguanidinate ligand in solution for the P-diphenyl derivatives whereas the P-dicyclohexyl analogs adopt a more rigid geometry with inequivalent N_amidine substituents within the phosphaguanidinate ligand. X-ray diffraction studies show exclusively monomeric tbp metal centers for a series of derivatives, with a chelating phosphaguanidinate ligand that spans an axial and an equatorial position. Two different conformers have been identified in the solid-state that differ in the relative orientation of the phosphorus R₂P–C substituents with respect to the equatorial plane of the tbp metal. The synthetic protocol was extended to the bimetallic complex, [PhP(C{NⁱPr}₂Ti{NMe₂}₃)CH₂–]₂, which was characterized by crystallography as the meso-form.     

The formation of a metallacycloheptadienyl intermediate in the reaction of palladacyclopentadienyl derivatives with tetracyanoethylene

The palladium(II) derivatives of the type 1 [Pd(LL′)(C₄R₁R₂R₃R₄)] (LL′ = HNSPh:2-(phenylthiomethyl)-pyridine (A), BiPy: 2,2′-bipyridyl (B), DPPE: bis-diphenylphosphinoethane (C), NEOC: neocuproine (2,2′-dimethyl-o-phenanthroline) (D), R₁ = R₄ = COOMe, R₂, R₃ = C₁₀H₆ (a), R₁ = R₃ = C₆H₅, R₂ = R₄ = COOMe (b), R₁ = R₂ = R₃ = R₄ = COOMe (c)) react with the electron poor olefin tetracyanoethylene (TCNE) to yield under mild conditions the type 2 cycles C₆(CN)₄R₁R₂R₃R₄ and the corresponding palladium(0) olefin derivative [Pd(η²]-TCNE)(LL′)]. The olefin insertion reactions are usually fast, but in the case of the reaction of complex 1Da with TCNE accumulation of an intermediate is observed. The low temperature NOESY spectrum allows the determination of the intermediate structure which can be described as a hepta-membered metallacycle species.     

Ce10[Si10O9N17]Br, Nd10[Si10O9N17]Br and Nd10[Si10O9N17]Cl oxonitridosilicate halides with a new layered structure type

The isotypic oxonitridosilicate halides Ce₁₀[Si₁₀O₉N₁₇]Br, Nd₁₀[Si₁₀O₉N₁₇]Br and Nd₁₀[Si₁₀O₉N₁₇]Cl were obtained by the reaction of the respective lanthanide metals, their oxides and halides with “Si(NH)₂” in a radiofrequency furnace at temperatures around 1800 °C, using CsBr, resp. CsCl, as a flux. The crystal structures were determined by single-crystal X-ray diffraction (Pbam, no. 55, Z=2; Ce/Br: a=10.6117(9) Å, b=11.2319(10) Å, c=11.688(8) Å, R1=0.0356; Nd/Br: a=10.523(2) Å, b=11.101(2) Å, c=11.546(2) Å, R1=0.0239; Nd/Cl: a=10.534(2) Å, b=11.109(2) Å, c=11.543(2) Å, R1=0.0253) and represent a new layered structure type. The structure refinements were performed utilizing an O/N-distribution model according to Paulings rules, i.e. nitrogen was positioned on all bridging sites and mixed O/N-occupation was assumed on the terminal sites resulting in charge neutrality of the compounds. The layers consist of condensed [SiN₂(O/N)₂] and [SiN₃(O/N)] tetrahedra of Q² and Q³ type. The chemical composition of the compounds was derived from chemical analyses for Nd₁₀[Si₁₀O₉N₁₇]Br and electron probe micro analyses (EPMA) for all three compounds. The results of IR spectroscopic investigations are reported.     

Syntheses and reactivities of azido coordinated CpCo(dithiolene) complexes

Azido coordinated dithiolene complexes [CpCo(N₃){S₂C₂(CO₂Me)₂}(S-CHR¹R²)], where R¹, R² = H (4a); R¹ = H, R² = SiMe₃ (4b); R¹ = H, R² = CO₂Et (4c), were synthesized by the reactions of the corresponding Cl⁻ coordinated precursors [CpCo(Cl){S₂C₂(CO₂Me)₂}(S-CHR¹R²)] (3a-3c) with sodium azide. The Cl⁻ coordinated complex 3d (R¹, R² = CO₂Me) did not produce any N₃⁻ coordinated complexes but formed the CR¹R²-bridged alkylidene adduct [CpCo{S₂C₂(CO₂Me)₂}(CR¹R²)] (2d; R¹, R² = CO₂Me). The structure of 4a was determined by X-ray diffraction study. In the molecular structure of 4a, the coordinated N₃⁻ ligand and CHR¹R² group were located at the same side with respect to the dithiolene ring (syn form), although the corresponding Cl⁻ precursor (3a; R¹, R² = H) was anti form. A structural conversion of syn/anti was conceivable during the Cl⁻/N₃⁻ ligand exchange. Thermal (80 °C) and photochemical reactions (Hg lamp) of 4a-4c were performed. Among them, 4c was relatively well reacted compared with the others to form the CR¹R²-bridged alkylidene adduct (2c; R¹ = H, R² = CO₂Et), followed by a formal HN₃ elimination, and the reaction also produced non-adduct of the cobalt dithiolene complex [CpCo{S₂C₂(CO₂Me)₂}] (1). The electrochemical 1e⁻ reduction of 4c underwent a formal N₃⁻ ligand elimination, and successive second reduction caused the CHR¹R² group elimination or reformed the CR¹R²-bridged alkylidene adduct 2c.     

Synthesis and characterization of fluorous (S)- and (R)-1-phenylethylamines that effect heat facilitated resolution of (±)-2-(8-carboxy-1-naphthylsulfinyl)benzoic acid via diastereomeric salt formation and study of their circular dichroism

Perfluoroalkyl- or nonafluoro-tert-butoxy-alkyl-substituted enantiopure amines having the structure PhCHCH₃(NR¹R²) [R¹ = H, CH₃; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃; R¹ = R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃] are obtained in high yields, when (S)-(−)-1-phenylethylamine is reacted with readily accessible alkylating reagents or fluorous 2° amines (R¹ = H; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃) are methylated in a Leuckart-Wallach reaction. The solubility patterns of these novel chiral amines and their hydrochlorides are qualitatively described for a broad spectrum of solvents and the fluorous partition coefficients of the free bases are determined by GC. A novel method for the resolution of enantiomers is disclosed here, which involves the use a half-equivalent of the selected resolving agent in solvent water that displays low solubility for the crystalline diastereomeric salt(s) formed even at temperatures near to its boiling point. Compound (S)-(−)-PhCHCH₃[NH(CH₂)₃C₈F₁₇] is found to satisfy all the latter conditions and successfully used for the heat facilitated resolution of the title racemic acid. The circular dichroism (CD) spectra of six novel fluorous (S)-(−)-1-phenylethylamine derivatives are measured in ethanol, trifluoroethanol and hexafluoropropan-2-ol and discussed in detail.     

Novel generation ponytails in fluorous chemistry: Syntheses of primary, secondary, and tertiary (nonafluoro-tert-butyloxy)ethyl amines

(Nonafluoro-tert-butyloxy)ethyl tosylate 4 was prepared in 65% yield from nonafluoro-tert-butanol 1 using commercially available reagents. Further reaction of 4 with HNR¹R² (R¹ = R² = H, CH₃; R¹ = H, R² = CH₃, (CH₂)₃C₈F₁₇, CH₂CH₂OC(CF₃)₃) affords the appropriate (CF₃)₃COCH₂CH₂NR¹R² amines in 20-69% yields. Improved overall yields of [(CF₃)₃COCH₂CH₂]_3−nNR_n to 1 were obtained by the reaction of (CF₃)₃CONa 2 and (XCH₂CH₂)_3−nNR_n (X = Cl, n = 0, 1, 2, R = CH₃; X = CH₃SO₂O, n = 1, R = CH₃SO₂) nitrogen mustards and a similar reactive β-substituted ethyl amine. The title amines are mobile colorless liquids and volatile with steam. The bulky fluorous ponytail (CF₃)₃CO(CH₂)₂ displays high acidic stability and increases fluorous character almost as much as the classical straight-chain C₈F₁₇(CH₂)₃ ponytail.