3-芳基-6-(6-/8-取代-4-氯喹啉-3-基)1,2,4-三唑-[3,4-b]-1,3,4-噻二唑类化合物的合成

研究了3－芳基－4－氨基－5－巯基－1，2，4－三唑与6－／8－取代－4－羟基喹啉－3－酸在三氯氧磷催化下的反应，制得16个的3-芳基－6－（6－／8－取代－4－氯喹啉－3－基）1，2－4，－三唑[3,4-b)-1,3,4-噻二唑，新化合物的结构通过元素分析，IR,^1H NMR和MS确定，讨论了其波谱性质。     

稠杂环化合物的研究（XV）──6－取代－3－（1H－苯并三唑－1－亚甲基）－1，2，4－三唑并［3，4－b］－1，3，4－噻二唑的合成

研究了３－（１Ｈ－苯并三唑－１－亚甲基）－４－氨基－５－巯基－１，２，４－三唑与取代苯甲酸在三氯氧磷催化下的反应，制得１０种新的３－（１Ｈ－苯并三唑－１－亚甲基）－１，２，４．三唑并［３，４－ｂ］－１，３，４－噻二唑，通过元素分析、ＩＲ、￣１ＮＭＲ和ＭＳ确证了它们的结构并讨论了其波谱性质。     

2，4－二羟基－3－芳氨基甲基苯乙酮和8－乙酰基－3－芳基－3，4－二氢－5－羟基－2H－1，3－苯并■嗪的合成及其相互转化

研究了在氯化氢－乙醇溶液或乙醇溶液中，２，４－二羟基苯乙酮与甲醛和芳胺的Ｍａｎｎｉｃｈ反应，分别得到了５个２，４－二羟基－３－芳氨基甲基苯乙酮和５个８－乙酰基－３－芳基－３，４－二氢－５－羟基－２Ｈ－１，３－苯并嗪新化合物。用元素分析、ＩＲ、１ＨＮＭＲ、ＭＳ、ＵＶ确定了它们的结构，并成功地实现了２，４－二羟基－３－芳氨基甲基苯乙酮和８－乙酰基－３－芳基－３，４．二氢－５－羟基－２Ｈ－１，３－苯并嗪二类化合物的转化。     

1－（取代吡唑－4－基）－1，2，4－三唑的合成及生物活性研究

合成了２３个新的１－（取代吡唑－４－基）１，２，４－三唑化合物，经ＥＡ、ＩＲ、~１ＨＮＭＲ和ＭＳ确定其组成和结构，并对其进行了抑菌及生长调节活性的初步观察。     

Synthesis of 3,6-Disubstituted 5,6-Dihydro-s-triazolo [3,4-b]-1,3,4-thiadiazolidines through the Intramolecular Mannich Reaction

３－取代基－４－氨基－５－巯基－１，２，４－三唑在微量酸催化下与取代芳香醛经分子内Ｍａｎｎｉｃｈ反应合成了２９个新的３，６－二取代－５，６－二氢－ｓ－三唑并［３，４－ｂ］－１，３，４－噻二唑啉类化合物，其结构经元素分析、ＩＲ和１ＨＮＭＲ进行确证，并讨论了反应的立体选择性。     

3-(3-吡啶基)-4-氨基-5-芳胺基-1,2,4-三唑的合成与表征

以烟酸与芳胺为基本原料，经多步反应，制得1－烟酰基－4－芳基氨基硫脲；后者在水合肼存在下关环，合成了一系列新化合物3－（3－吡啶基）－4－氨基－5－芳胺基－1，2，4－三唑。化合物结构经元素分析、IR，^1H NMR,^13C NMR确证。     

稠杂环化合物的研究（Ⅸ）──3－芳基－6－（2，4－二氯苯氧乙酰胺基）均三唑并［3，4－b］－1，3，4－噻二唑的合成

３－芳基－４－氨基－１，２，４－均三唑－５－硫酮和２．４－二氯苯氧乙酰异硫氰酸酯在丙酮中于６０℃回流，制得１０个新的均三唑并［３，４－ｂ］－１，３，４－噻二唑（３ａ－ｊ）化合物，用元素分析、ＩＲ、１ＨＮＭＲ和ＭＳ确证了结构，并讨论了反应机制。     

4＇－甲氧基－2＇，7－二羟基黄烷酮的合成

２－羟基－４－甲氧基甲氧基苯乙酮与２－甲氧基甲氧基－４－甲氧基苯甲醛经缩合、环化、除保护基等反应合成了４＇－甲氧基－２＇，７－二羟基黄烷酮。     

1，4—二锂四苯基—1，3—丁二烯与卤代烃反应的研究（Ⅱ）——与溴甲烷的反

1，4－二锂四苯基－1，3－丁二烯与溴甲烷反应生成顺，顺－和顺，反－2，3，4，5－甲苯基－2，4－己二烯，其分子结构和比例由MS－NMR及X射线单晶分析所确定，讨论了产物的生成途径。     

2,3-二氢-3,5-二羟基-6-甲基-4(H)吡喃-4-酮的合成及热裂解行为

以葡萄糖和哌啶为原料，合成、分离并鉴定了2，3－二氢－3，5－二羟基－6－甲基－4－（H）吡喃－4－酮（1），以空气氛下直接热裂解，SPME吸附热裂解挥发生产物的方式，分析鉴定了20个裂解的挥发性化合物，讨论了热裂解的可能过程。     

Laser Flash Photolysis on Electron Transfer Reactions between 1,8-Dihydroxyanthraquinone with Adenine and Cytosine

Electron transfer （ET） reactions between 1,8-dihydroxyanthraquinone （DHAQ） and two DNA bases, adenine （A） and cytosine （C）, have been investigated in CH3CN/H20 solution with nanosecond time-resolved laser flash photolysis. After irradiation at 355 nm, the triplet DHAQ is produced via intersystem crossing and reacts with two nucleobases. ET processes for both reactions have been definitely identified, in which two bases play a significant role of electron donor. Based on the measured decay dynamics of various intermediates and the corresponding quenching rates, an initial ET process followed by a secondary proton-transfer reaction is suggested for both the overall reactions. By plotting the observed quenching rate against the concentration of two DNA bases, the bimolecular quenching rate constants are determined as 9.0-10s L/（mol.s） for the 3DHAQ＊＋C reaction and 3.3x10^8 L/（mol.s） for the 3DHAQ＊＋A reaction, respectively.     

Film Mass Transfer Coefficient Expressions for Electroosmotic Flows

Expressions are developed and presented that could be used to determine the film mass transfer coefficient of a solute in electroosmotic flows. In contrast to pressure-driven flows at low Reynolds numbers where the film mass transfer coefficient is independent of the linear characteristic dimension of the channel for flow, in electroosmotically driven flows at low Reynolds numbers the film mass transfer coefficient is shown to be a function of the ratio R/lambda, where R is the channel radius and lambda is the Debye length. This result implies that for electroosmotically driven flows in a packed bed or porous monolith with channels for flow having similar geometry but different sizes, the film mass transfer coefficient would vary with the size of the interstitial channels for bulk flow while in pressure-driven flows the film mass transfer coefficient would be the same for all interstitial channels. From the expressions presented in this work, one can show that for the same volumetric flow rate the film mass transfer coefficient of electroosmotically driven flows is proportional to that for pressure-driven flows. Copyright 2000 Academic Press.     

Dehydrogenation of adenine induced by slow (<3 eV) electrons

Low energy (<3 eV) electrons impact to gas phase Adenine generates the dehydrogenated Adenine negative fragments, (A–H)⁻, and an H-atom neutral radical counterpart. Within the energy range of 0.7–2.8 eV, production of (A–H)⁻ arises from Dissociative Electron Attachment (DEA). In addition, a sharp peak is observed at near 0 eV. This peak is identified to arise from dissociative electron transfer reaction of SF₆⁻ (from the calibration gas) with Adenine.     

EQCM技术对电子传递促进机制的研究

本文报道了腺嘌呤存在时对超氧化物歧化酶在金丝电极上电化学行为的影响。并从电化学石英晶体微天平技术的测量结果，初步讨论了腺嘌呤对促进超氧化物歧化酶电子传递过程的作用机制。     

HEH/EHP在中空纤维膜器中萃取钕、钐及传质研究

２－乙基己基膦酸单２－乙基己基酯（ＨＥＨ／ＥＨＰ,ＨＬ）是广泛用于稀土分离湿法冶金的有效萃取剂［１～３］．未氨化的ＨＥＨ／ＥＨＰ在中空纤维膜（ＨＦＭ）中萃取稀土元素的机理和控制模式已有报道［４,５］,但未氨化的ＨＥＨ／ＥＨＰ对轻、中稀土的萃取能力较弱...     

液/液界面电子转移研究苯甲酰吡啶-缩氨基硫脲的亲脂性

The ion transfer reaction of 2-benzoylpyridine-thiosemicarbazone (HL), which has antimicrobial and antifungal properties and anticancer activity, has been studied to determine its lipophilicity by cyclic voltammetry at the water/1,2-dichloroethane (1,2-DCE) interface. The physicochemical parameters such as standard partition coefficient (IgP1) and the standard Gibbs energy of transfer (△G0,w→otr,I) of the protonated form of the ligand were measured as a function of pH in aqueous phase. The protonated form of the ligand exhibited reversible or quasi-reversible voltammograms at the 1,2-DCE in the range of pH 1-5. The protonation constants of the ligand, pKal, and pK? were determined spectrophotometrically and were found to be 12.14 and 3.24, respectively. The standard Gibbs energy of transfer (△G0,w→otr,N) and the partition coefficient of neutral species (IgPN) were also determined by the shake-flask method. The standard Gibbs energy of transfer of this compound across the water/1,2-DCE interface was evaluated as the quantitative measure of its lipophilicity. The difference between lgP1 and lgPN was related to the degree of charge delocalization and was used to evaluate qualitatively the lipophilicity of the ligand.     

Improved electrochemical immunosensor for myeloperoxidase in human serum based on nanogold/cerium dioxide-BMIMPF6/L-Cysteine composite film

An electrochemical immunosensing assay for myeloperoxidase (MPO) determination in human serum has been developed. Firstly, L-Cysteine was initially electropolymerized on an Au electrode to form L-Cysteine film. After that cerium dioxide (CeO2) dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) were immobilized on the L-Cysteine film. Then the negatively charged nanogold particles were adsorbed onto the membrane via the positive charge of CeO2, which aimed at assembling more antibody of MPO (anti-MPO). The resulting immunosensor showed a high sensitivity, broad linear response to the MPO concentration comprised between 10 ng/mL and 400 ng/mL with a detection limit of 0.06 ng/mL. Moreover, the surface morphology of the electrode was studied by means of a scanning electron microscope and the electrochemical properties of the fabricated immunosensor were further characterized by cyclic voltammetry. Also, factors influencing the performance of the resulting immunosensors were studied in detail.     

The Study of One Carbon Unit Transfer from Imidazolidine to dUMP Analogue with ONIOM Theory

ONIOM quantum mechanics method is used in this paper to study one-carbon unit transfer from imidazolidine to 6-aminouracil derivates. The computation results show that this reaction can be completed via three paths owing to the three different proton transfer modes. By calculation and analysis, we can find the direct proton transfer is the preferable pathway.     

On-line Calibration and Determination of the Heat of Reaction for Laboratory Scale Heat Transfer Calorimeters

A simple method for the on-line calibration, in which both the heat transfer coefficient and the heat capacity of the reactor contents are determined, is described for laboratory scale heat transfer calorimeters. The calorimeter is operated in the isoperibolic mode for the calibration and a constant power is supplied to a resistor placed inside the reactor. The reactor heat balance differential equation is used to produce a set of linear simultaneous equations with each data acquisition cycle giving one equation. The heat transfer coefficient and the heat capacity are obtained from this set of equations by linear least squares. The application of the calibration procedure is illustrated by experiments in which the heat of reaction is determined on-line fora simulated reaction with first order kinetics and for the hydrolysis of acetic anhydride. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat Transfer Performance of Milk Pasteurization Plate Heat Exchangers Using MWCNT/Water Nanofluid

Increasing efficacy of plate heat exchanger (PHE) is a method of reducing energy consumption of milk pasteurization and sterilization in dairy industries. In order to enhance heat transfer capability of water as a hot stream in PHEs, multiwalled carbon nanotubes (MWCNT) were added to water. An experimental setup was designed and manufactured to measure heat transfer coefficient and Nusselt number (Nu) as two key parameters for convective heat transfer. This system had two individual loops for hot and cold fluids. The experimental results clearly indicated that heat transfer coefficient and Nu number of pure water increased by adding MWCNT with weight concentration of less than 1 wt%. With increasing weight concentration of the nanoparticles, heat transfer coefficient and Nu number increased. This augmentation was intensified at higher Peclet numbers which showed more effective presence of them at high flow rates of nanofluids. Moreover, at constant weight concentration, both heat transfer coefficient and Nu number increased. Augmentation of heat transfer capability resulted in more heat exchange with milk fluid in a short time; thus, before occurrence of fouling in plates of exchanger, pasteurization of milk and production of the products would be easier.