Aggregation of Sodium Dodecyl Sulfonate in Poly—ethylene Glycol Aqueous Solutions Studied by Two—dimensional Nuclear Overhauser Enhancement Spectroscopy

Two-dimensional nuclear overhauser enhancement (2D NOESY) measurements show that sodium dodecyl sulfonate SDSN molecules co-aggregate with poly-ethylene glycol PEG in their aqueous solution at a concentration range of SDSN between the so-called co-aggregation concentration (cac) and the normal critical micellar concentration (cmc). SDSN micelles are formed when the cmc of SDSN is reached with PEG uniformly distributed in the interior.     

A cationic fluorocarbon surfactant DEFUMACl and its mixed systems with cationic surfactants: 19F NMR and surface tension study

A cationic fluorocarbon surfactant system of diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMACl) and both mixed systems of DEFUMACl/cationic dodecyltrimethylammonium chloride (DTACl) and DEFUMACl/cationic Gemini copolymer was investigated by 19F NMR spectroscopy and surface tension measurements. The critical micelle concentration (cmc) of DEFUMACl by 19F NMR is about 3.40 mmol/L, which is completely consistent with that obtained by the surface tension method. The studies of salt and temperature on the cmc values of DEFUMACl suggest that both salt addition and temperature increase decrease the cmc values of DEFUMACl. 19F NMR measurements provide much richer information on both mixed systems. For the DEFUMACl-DTACl system, two break points were observed with increased total surfactant concentration. The first break point means the DEFUMACl and DTACl mixed micelles and the second one implies the individual DEFUMACl micelles. Results of 19F NMR and surface tension measurements for DEFUMACl/cationic Gemini copolymer mixtures show three peculiar break points, corresponding to the critical association concentration (cac) of DEFUMACl, the concentration where cationic Gemini copolymer molecules become saturated by DEFUMACl micelles, and the concentration where DEFUMACl micelles and cationic Gemini copolymer coexist. These peculiar points in the cationic-fluorocarbon and cationic-copolymer systems were first reported by 19F NMR and surface tension measurements. These results should broaden the useful information for a better understanding of the mechanism of interaction and the behavior of surfactant-polymer mixtures.     

Calorimetric investigation of the interaction between lithium perfluorononanoate and poly(ethylene glycol) oligomers in water

The interaction of lithium perfluorononanoate (LiPFN) with poly(ethylene glycol) (PEG) molecules of different molecular weights (300 < MW < 20000 Da) has been investigated in water at 298.15 and 308.15 K by isothermal titration calorimetry (ITC). Density, viscosity, and conductivity measurements were also performed at 298.15 K. The aggregation process of this surfactant on the PEG polymeric chain was found to be very similar to that exhibited by cesium perfluorooctanoate (CsPFO) and appears to be consistent with the necklace model. ITC titrations indicated that a fully formed LiPFN micellar cluster can be wrapped by a PEG chain having a molecular weight (MW) of approximately 3200 Da, longer than that required by the shorter perfluorooctanoate (MW approximately 2600 Da), and also suggested a stepwise mechanism for the aggregation of successive micelles. Viscosity data indicate that the formation of polymer-surfactant complexes between PEG and LiPFN involves a conformational change of the polymer. The aggregation of preformed micelles of LiPFN or CsPFO or SDS on the PEG polymeric chain always gives rise to further stabilization.     

Allylation of phenoxides by crown ethers and their polymers

Allylation of sodium phenoxide in the presence of crown ethers produces a high ratio of O/O + C allylation when conducted in water, phenol, benzene, or diethyl ether. The striking increase in the product ratios is attributed to specific complexation of the crown ethers that facilitate the dissociation of the ion pair aggregate of the sodioderivative in benzene or diethyl ether. The crown ethers may act as a phase transfer catalyst when the reaction is run in water. Furthermore, the O/O + C ratios of the allylation strongly depend on the kind of crown ethers used. To examine their effect the allylation of sodium phenoxide was studied with various crown ethers, such as 18-crown-6, benzo-18-crown-6, benzo-15-crown-5, poly(vinylmonobenzo-15-crown-5), and poly(vinylmono-benzo-18-crown-6), as catalysts. It was found that among these crown ethers poly(vinylmono-benzo-15-crown-5) was the most effective catalyst.     

Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.     

Thermochemical behaviour of crown ethers in the mixtures of water with organic solvents: Part VII. Enthalpy of solution of 15-crown-5 and benzo-15-crown-5 in the mixtures of water with acetone at 298.15 K

Enthalpy of solution of crown ethers (15-crown-5 and benzo-15-crown-5) in water-acetone mixtures have been measured within the whole range of mole fraction at 298.15 K. The obtained data have been compared with those of the solution enthalpy of both crown ethers in the mixtures of water with dimethyl sulfoxide. The replacement of SO group with CO in the molecule of the organic solvent brings about an increase in the exothermic effect of the solution of 15-crown-5 and benzo-15-crown-5 ethers, especially in the mixtures with a medium water content. The observed effect is connected with the preferential solvation of the molecules of both crown ethers by acetone molecules in the water-acetone mixtures. The process of preferential solvation of 15-crown-5 and benzo-15-crown-5 ethers does not take place in the water-dimethyl sulfoxide mixture.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 1. synthesis and properties of aqueous solutions

Six different hybrid fluorocarbon-hydrocarbon (F-H) sulfate and sulfonate surfactants, with variations in the relative F/H carbon chain length, have been synthesized and characterized in aqueous solution. These compounds have been targeted for potential activity in densified CO2. Tensiometric data and chemical analyses were consistent with surfactants of high chemical purity. Fluorination in terms of the F/H ratio exerts a strong control over all the surfactant physicochemical properties, including critical micelle concentrations (cmc's) and adsorption isotherms. One of these partially fluorinated surfactants (the sulfonate phi-F6H4) achieves very low surface tensions in water (gamma(cmc) approximately 19 mN m(-1)) more reminiscent of fully fluorinated double-chain compounds. Detailed 19F NMR studies revealed that omega'-CF3 groups can exhibit separate signals for monomeric and micellized forms, hence facilitating cmc determinations. Small-angle neutron scattering investigations confirmed the presence of ellipsoidal or extended disklike micelles, depending on the F-H chain asymmetry. For example, a symmetric hybrid F8H8 generates disklike micelles, whereas chain asymmetry in F8H4 or phi-F6H4 tends to drive cylindrical aggregation structures. These changes are consistent with variations in the surfactant packing parameter caused by the different chain F/H ratios. Hence, adsorption and aggregation are shown to respond in a predictable way to the molecular structure of these unusual surfactants.     

Molecular mechanism and thermodynamics study of plasmid DNA and cationic surfactants interactions

The molecular mechanism and thermodynamics of the interactions between plasmid DNA and cationic surfactants were investigated by isothermal titration calorimetry (ITC), dynamic light scattering, surface tension measurements, and UV spectroscopy. The cationic surfactants studied include benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, cetylpyridinium chloride, and cetyltrimethylammonium chloride. The results indicate a critical aggregation concentration (cac) of a surfactant: above the cac the surfactant forms aggregates with plasmid DNA; below the cac, however, there is no detectable interaction between DNA and surfactant. Surfactants with longer hydrocarbon chains have smaller cac, indicating that hydrophobic interaction plays a key role in DNA-surfactant complexation. Moreover, an increase in ionic strength (I) increases the cac but decreases the critical micellization concentration (cmc). These opposite effects lead to a critical ionic strength (I(c)) at which cac = cmc; when I < I(c), cac < cmc; when I > I(c), DNA does not form complexes with surfactant micelles. In the interaction DNA exhibits a pseudophase property as the cac is a constant over a wide range of DNA concentrations. ITC data showed that the reaction is solely driven by entropy because both deltaH(o) (approximately 2-6 kJ mol(-1)) and deltaS(o) (approximately 70-110 J K(-1) mol(-1)) have positive values. In the complex, the molar ratio of DNA phosphate to surfactant is in the range of 0.63-1.05. The reaction forms sub-micrometer-sized primary particles; those aggregate at high surfactant concentrations. Taken together, the results led to an inference that there is no interaction between surfactant monomers and DNA molecules and demonstrated that DNA-cationic surfactant interactions are mediated by the hydrophobic interactions of surfactant molecules and counterion binding of DNA phosphates to the cationic surfactant aggregates.     

PEG400 novel phase description in water

The behavior of hydroxyl-terminated PEG400 in water was investigated by surface tension measurements and 13C NMR as a function of concentration and temperature. PEG400 exhibited a critical aggregative concentration (cac) that evidenced both its amphiphilic character and its aggregation capacity. Moreover, the chemical shifts of the different carbons of the PEG were followed by NMR versus concentration at various temperatures. We observed a plateau between 20 and 35 degrees C at concentrations above 0.2 mol L(-1) and ascribed it to the aggregation process. A good correlation was found between the NMR spectra in the region of aggregation and the cac region in the phase diagram. Our investigations were also focused on the solid-liquid region of the phase diagram at lower temperatures. These experimental data, together with conclusions available in the literature, led us to propose explanations for the conformation/hydration/aggregation in the PEG400-water solutions phenomena.     

明胶和阳离子表面活性剂CTAB的相互作用

采用电导法、荧光法、pH等方法研究了明胶与十六烷基三甲基溴化铵 (CTAB)的相互作用.结果表明,在CTAB/明胶 /水体系中,明胶浓度的增大使得CTAB分子的cac₁,cac₂,cmc值均上升,胶束的聚集数下降.冷冻蚀刻透射电镜实验(FFTEM)的结果证实了明胶分子与CTAB分子之间形成了复合物,随着CTAB浓度的增加,结构从线状、卷曲、珍珠项链状、棒状至网状依次变化.     

Effect of the nature of the counterion on the interaction between cesium and tetraalkylammonium dodecylsulfates and poly(ethylene oxide) or poly(vinylpyrolidone)

The interaction between poly(ethylene oxide) or poly(vinylpyrrolidone) and cesium and tetraalkylammonium (tetramethyl to tetrabutyl ammonium) dodecylsulfate has been investigated by means of electrical conductivity measurements to determine the critical aggregation concentration (cac) of the surfactants in the presence of polymer. The cac values were compared to the values of the critical micellization concentration (cmc) of the surfactants in the absence of polymer. The value of the cac/cmc ratio increased with the radius of the counterion in the sequence: Na(+)相似文献   

Inclusion compounds: The products of the interaction of silicon,germanium and boron fluorides with crown ethers

This review deals with the problem of the interaction of Si(IV), Ge(IV) and B(III) fluorides with crown ethers and their aza analogues. The crystallographic structures have been determined of the stable products obtained by the interaction of H₂SiF₆ solution with the following crown ethers: 18-crown-6 (18C6), monoaza-18C6 (MA18C6), 1,10-diaza-18C6 (DA18C6) and 1,7-diaza-15C5 (DA 15C5). The complexes obtained are stabilized by a system of H-bonds of the O-H... O, N-H. ... O, N-H...F and O-H ... F types. For H₂GeF₆ the adducts obtained are similar to those obtained using H₂SiF₆. The crystal structures of three new boron fluoride-containing complexes with 18-membered crown ethers are also described. During macrocycle complexation the guest entities undergo chemical transformations which are stabilized by creation of the H- bond system. The results of vibrational and NMR spectra are also discussed.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Ultrafast dynamics of liquid poly(ethylene glycol)s and crown ethers studied by femtosecond Raman-induced Kerr effect spectroscopy

Ultrafast molecular dynamics of liquid poly(ethylene glycol)s, tetra(ethylene glycol), penta(ethylene glycol), and poly(ethylene glycol) with the molecular weight of 600, and crown ethers, 12-crown-4 and 15-crown-5, have been investigated by means of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy. Picosecond Kerr transients of poly(ethylene glycol)s and crown ethers are characterized by a biexponential function with the time constants of about 2 and 20 ps. Both the faster and slower time constants do not vary much among the five oligo(ethylene oxide)s. Femtosecond dynamics is discussed based on the Kerr (depolarized Raman) spectra obtained by Fourier transform deconvolution analysis of the high time resolution Kerr transients. The broad low-frequency band (0-200 cm(-1)) in the Kerr spectrum is analyzed by two Brownian oscillators. The spectral shapes of linear poly(ethylene glycol) and cyclic crown ether are very different. Both the low- and high-frequency Brownian oscillators for crown ethers show lower frequency and broader spectral features than those for poly(ethylene glycol)s. The comparison of the low-frequency spectra of poly(ethylene glycol)s and crown ethers shows that the low-frequency spectrum of 15-crown-5 is closer to that of poly(ethylene glycol)s than that of 12-crown-4 is. The difference of the low-frequency spectra between poly(ethylene glycol) and crown ether is discussed with the concepts of molecular conformation and liquid density. The features of the observed intramolecular vibrational bands are also correlated with the molecular conformations.     

Crown ether complexes with H₃O⁺ and NH₄⁺: proton localization and proton bridge formation

The complexes formed by crown ethers with hydronium and ammonium cations are of key relevance for the understanding of their supramolecular behavior in protic solvents. In this work, the complexes of the 15-crown-5 (15c5) and 18-crown-6 (18c6) ethers with H?O? and NH?? and their deuterated variants are investigated under isolated conditions. The study employs infrared multiple photon dissociation (IRMPD) vibrational spectroscopy and DFT B3LYP/6-31++G(d,p) calculations for conformational assignment. The 18c6 ether provides two energetically nearby C(3v) conformations with commensurate linear O-H···O and N-H···O bonds. The 15c5 ether ring adopts partially folded asymmetric pyramidal geometries, yielding one shorter linear H bond and two longer non-linear H bonds. Remarkably, an appreciable broadening of the IRMPD vibrational bands is observed for the 15c5-H?O?/D?O? complexes. This can be interpreted as a signature for partial sharing of the proton (or deuteron) between the water and the crown ether along the linear O-H···O intermolecular H bond, which is indeed particularly short for this complex.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

Crown-Ether Phase-Transfer Catalysts for Reduction of Ketones,Oxidation of Olefins and Polymerization of p-Xylenedibromide

Various homogeneous and heterogeneous crown ether catalysts were prepared and applied as phase transfer catalysts for some reductions, oxidations and polymerizations. Among various crown ethers, 15-crown-5 seems the best to catalyze the reduction of ketones and aldehydes with sodium borohydride in nonpolar aprotic solvents. A granular entrapped 15-crown-5-polyacrylamide catalysts was also prepared and applied as a heterogeneous catalyst for these reductions which seem to obey pseudo-first-order kinetics with rate constant 10^?4–10⁵ s^?1. The steric effects of ketones and the effects of temperature and concentration of crown ethers, sodium borohydride and carbonyl compounds were also investigated. Among various crown ethers, 18-crown-6 is the best to catalyze the oxidation of olefins such as styrene, xylene and stilbene with potassium permanganate. Crown ethers were successfully applied as catalysts for anionic polymerization of p-xylenedibromide with sodium dithionite as an initiator.     

青霉素钾对CTAB胶束性质的影响

研究了青霉素钾对十六烷基三甲基溴化铵（CTAB）的cmc、CTAB胶束聚集数和扩散系数的影响.研究结果表明，青霉素钾(Pen K)的加入使得CTAB胶束的第一cmc、第二cmc上升；CTAB球形胶束的聚集数下降,扩散系数增加；CTAB棒状胶束的聚集数增加,扩散系数降低.     

NMR investigations of self-aggregation characteristics of SDS in a model assembled tri-block copolymer solution

The present work was undertaken with a view to understand the influence of a model non-ionic tri-block copolymer PEO-PPO-PEO (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)) with molecular weight 5800 i.e., P123 [(EO)(20)-(PO)(70)-(EO)(20)] on the self-aggregation characteristics of the anionic surfactant sodium dodecylsulfate (SDS) in aqueous solution (D(2)O) using NMR chemical shift, self-diffusion and nuclear spin-relaxation as suitable experimental probes. In addition, polymer diffusion has been monitored as a function of SDS concentration. The concentration-dependent chemical shift, diffusion data and relaxation data indicated the significant interaction of polymeric micelles with SDS monomers and micelles at lower and intermediate concentrations of SDS, whereas the weak interaction of the polymer with SDS micelles at higher concentrations of SDS. It has been observed that SDS starts aggregating on the polymer at a lower concentration i.e., critical aggregation concentration (cac=1.94 mM) compared to polymer-free situation, and the onset of secondary micelle concentration (C(2)=27.16 mM) points out the saturation of the 0.2 wt% polymer or free SDS monomers/micelles at higher concentrations of SDS. It has also been observed that the parameter cac is almost independent in the polymer concentrations of study. The TMS (tetramethylsilane) has been used as a solubilizate to measure the bound diffusion coefficient of SDS-polymer mixed system. The self-diffusion data were analyzed using two-site exchange model and the obtained information on aggregation dynamics was commensurate with that inferred from chemical shift and relaxation data. The information on slow motions of polymer-SDS system was also extracted using spin-spin and spin-lattice relaxation rate measurements. The relaxation data points out the disintegration of polymer network at higher concentrations of SDS. The present NMR investigations have been well corroborated by surface tension and conductivity measurements.     

Application of crown ethers as modifiers for the separation of amines by capillary electrophoresis

The separation of amines with capillary electrophoresis (CE) was made possible by applying crown ethers such as 18-crown-6 and 15-crown-5 as modifiers. Crown ether 18-crown-6 performed better as a modifier than 15-crown-5. The mobility change of primary amines with 18-crown-6 was larger than that for secondary and tertiary amines. The mobility change of various amines with 18-crown-6 were in the order: 1-aminobutane>2-aminobutane>2-amino-2-methylpropane. Effects of crown ether concentration, pH and cations in the eluent of CE were also investigated and discussed. Some neurotransmitters such as dopamine, serotonin, epinephrine, isoproterenol and phenylalanine were separated successfully by using crown ethers in CE analysis.