Catalytic reduction of 4‐nitrophenol using silver nanoparticles‐engineered poly(N‐isopropylacrylamide‐co‐acrylamide) hybrid microgels

Nearly monodisperse poly(N ‐isopropylacrylamide‐co ‐acrylamide) [P(NIPAM‐co‐AAm)] microgels were synthesized using precipitation polymerization in aqueous medium. These microgels were used as microreactors to fabricate silver nanoparticles by chemical reduction of silver ions inside the polymer network. The pure and hybrid microgels were characterized using Fourier transform infrared and UV–visible spectroscopies, dynamic light scattering, X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry and transmission electron microscopy. Results revealed that spherical silver nanoparticles having diameter of 10–20 nm were successfully fabricated in the poly(N ‐isopropylacrylamide‐co ‐acrylamide) microgels with hydrodynamic diameter of 250 ± 50 nm. The uniformly loaded silver nanoparticles were found to be stable for long time due to donor–acceptor interaction between amide groups of polymer network and silver nanoparticles. Catalytic activity of the hybrid system was tested by choosing the catalytic reduction of 4‐nitrophenol as a model reaction under various conditions of catalyst dose and concentration of NaBH₄ at room temperature in aqueous medium to explore the catalytic process. The progress of the reaction was monitored using UV–visible spectrophotometry. The pseudo first‐order kinetic model was employed to evaluate the apparent rate constant of the reaction. It was found that the apparent rate constant increased with increasing catalyst dose due to an increase of surface area as a result of an increase in the number of nanoparticles.     

Novel Silver/Poly(vinyl alcohol) Nanocomposites for Surface‐Enhanced Raman Scattering‐Active Substrates

Summary: Surface‐enhanced Raman scattering (SERS)‐active substrates with high enhancement were prepared by an in situ reduction method. Novel silver/poly(vinyl alcohol) (PVA) nanocomposite films were obtained, in which the silver nitrate, poly(γ‐glutamic acid) (PGA), and PVA acted as precursor, stabilizer, and polyol reducant, respectively. The UV‐visible spectra of the as‐fabricated films showed that the surface plasmon resonance (SPR) absorption band was narrow and of a stronger intensity, which indicates that the Ag nanoparticle size distribution on the substrate was highly uniform. This finding was further confirmed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and field‐emission scanning electron microscope (FE‐SEM) measurements. It was found that a PGA‐stabilized PVA nanocomposite film revealed the presence of well‐dispersed spherical silver nanoparticles with an average diameter of 90 nm. The new substrate presents high SERS enhancement and the enhanced factor is estimated to be 10⁶ for the detection of benzoic acid.

The Raman scattering enhancement factor for the Raman spectra of benzoic acid on the various nanocomposite films.     

Preparation of Ag nanoparticles termini‐protected side‐chain liquid crystalline azobenzene polymers by RAFT polymerization

A new synthetic approach to prepare Ag nanoparticles protected side‐chain liquid crystalline (LC) azobenzene polymers was reported. It is based on the reduction of silver ions in presence of a LC polymer polymerized by RAFT. The formation of Ag colloidal nanoparticles was confirmed by TEM and UV analysis. At the same time, according to the results of DSC, XPS, and FTIR spectra, Ag nanoparticles were protected by the side‐chain LC azobenzene polymers through surface attachment interactions between thiol groups and Ag. The out‐plane orientation of side‐chain LC is confirmed by surface‐enhanced Raman spectra analysis and scanning near‐field optical microscope, resulting from the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5380–5386, 2007     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006     

Simultaneous synthesis of silver nanoparticles and poly(2,5‐dimethoxyaniline) in poly(styrene sulfonic acid)

Silver nanoparticles were formed in situ along with poly(2,5‐dimethoxyaniline) (PDMA) in an interconnected network matrix (reactor), comprising the electronic conductive polymer, PDMA, and a polyelectrolyte, poly(styrene sulfonic acid) (PSS), through the simultaneous reduction of Ag⁺ ions and polymerization of 2,5‐dimethoxyaniline. In situ ultraviolet‐visible spectroscopy showed that peaks corresponding to the plasmon resonance of silver nanoparticles at 411 nm and the polaronic transition of PDMA at 438 nm provided evidences for the simultaneous formation of silver nanoparticles and PDMA. Transmission electron microscopy and size distribution analysis revealed the presence of spherical silver nanoparticles with an average diameter of 12 nm in the composite. X‐ray photoelectron spectroscopy showed that the amine units in PDMA changed to imine units upon the formation of silver nanoparticles. A comprehensive mechanism for the formation of the PDMA‐PSS‐Ag nanocomposite is proposed. A 10‐fold increase in the conductivity was noticed for the PDMA–PSS–Ag nanocomposite (1 S/cm) in comparison with the PDMA–PSS composite (0.1 S/cm). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3843–3852, 2006     

One‐Step Synthesis of Silver Nanoparticle‐Decorated Hydroxyapatite Nanowires for the Construction of Highly Flexible Free‐Standing Paper with High Antibacterial Activity

A highly flexible and free‐standing paper with high antibacterial activity made from silver nanoparticle (AgNP)‐decorated ultralong hydroxyapatite nanowires (HAPNWs) is reported. The HAPNWs@AgNPs nanocomposites were obtained from a facile one‐step solvothermal process and utilized for the construction of highly flexible and free‐standing inorganic paper through a simple vacuum‐filtration procedure. The structure and properties of the HAPNWs@AgNPs paper were characterized in detail. Scanning electron microscope (SEM) and transmission electron microscope (TEM) micrographs show that AgNPs are highly dispersed and stabilized in the nanocomposite and exhibit a narrow particle size distribution. The effects of the concentration of silver nitrate, solvothermal temperature and time on the product were systematically investigated. This method is simple, convenient and reproducible. The as‐prepared HAPNWs@AgNPs paper shows long‐time sustained silver‐ion release, high antibacterial activity against both Gram‐negative and Gram‐positive bacteria, and good biocompatibility. Overall, this work provides a novel pathway for the preparation of a new type of highly flexible, free‐standing and antibacterial inorganic paper made from silver nanoparticle‐decorated hydroxyapatite nanowires for various applications, as a promising functional biomaterial.     

Effect of the polymer matrix on the formation of silver nanoparticles in polymer–silver salt complex membranes

When polymer–silver salt complex membranes were exposed to UV irradiation, the separation performances of both the permeance and selectivity for propylene–propane decreased, which was primarily attributed to the reduction of the silver ions in the membranes to silver nanoparticles. Here, the effect of the polymer matrix on the formation of silver nanoparticles in the polymer–silver salt complex membranes was investigated. This effect was assessed for the complexes of two kinds of silver salts (AgBF₄ and AgCF₃SO₃) with several polymeric ligands containing three different carbonyl groups, including poly(vinyl pyrrolidone) (PVP) with an amide group, poly(vinyl methyl ketone) (PVMK) with a ketone group, and poly(methyl methacrylate) (PMMA) with an ester group. UV–vis spectra and transmission electron microscopy (TEM) images clearly indicated that the reduction rate of the silver ions has the following order in the various polymer matrices: PVP > PVMK > PMMA, whereas the size and the distribution of the nanoparticles exhibited the reverse order. The tendency to form silver nanoparticles was explained in terms of the differences between the comparative strengths of the interactions of the silver ions with the different carbonyl oxygens in the matrices, as well as that of the silver ions with counteranions, which was characterized by X‐ray photoelectron spectroscopy (XPS) and FT‐Raman spectroscopy. It was concluded that when the concentration of free silver ions was low due to weak polymer–silver ion and strong silver ion–anion interactions, as found with PMMA, the reduction rate of silver ions to silver nanoparticles was slow. Therefore, the PMMA–silver complex membranes were less sensitive to decreases in separation performance upon UV irradiation than compared to the PVP membranes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1168–1178, 2006     

Modeling emulsion polymerization stabilized by polymerizable surfactants

A mathematical model for seeded emulsion polymerization stabilized with polymerizable surfactants (surfmers) was developed. The model accounts for the main features of the process and provides information about surfmer conversion as well as surfmer burying inside the polymer particles. The model was validated by comparing its predictions with the experimental results for the effect of particle size, surface properties of the surfmer, and type of initiator on surfmer conversion. The effect of surfmer reactivity on surfmer incorporation to the polymer backbone is also discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 585–595, 2001     

Incorporation of a new alkenyl‐based nonionic surfmer into acrylic latexes

The mechanisms by which a new nonionic alkenyl‐based surfmer (Maxemul 5011?) was involved in acrylic emulsion polymerization were investigated. No proof of homopolymerization or of chain transfer to surfmer was obtained under the conditions studied. The effect of the initiator type, feeding time of the surfmer, particle size of the seed, and surfmer concentration, on kinetics and surfmer incorporation showed that the surfmer reacted mainly by copolymerization with the monomers in the outer shell of the polymer particles. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4202–4211, 2004     

Unveiling the Advances of Nanostructure Design for Alloy‐Type Potassium‐Ion Battery Anodes via In Situ TEM

Nanostructure design and in situ transmission electron microscopy (TEM) are combined to demonstrate Sb‐based nanofibers composed of bunched yolk–shell building units as a significantly improved anode for potassium‐ion batteries (PIBs). Particularly, a metal–organic frameworks (MOFs)‐engaged electrospinning strategy coupled to a confined ion‐exchange followed by a subsequent thermal reduction is proposed to fabricate yolk–shell Sb@C nanoboxes embedded in carbon nanofibers (Sb@CNFs). In situ TEM analysis reveals that the inner Sb nanoparticles undergo a significant volume expansion/contraction during the alloying/dealloying processes, while the void space can effectively relieve the overall volume change, and the plastic carbon shell maintains the structural integrity of electrode material. This work provides an important reference for the application of advanced characterization techniques to guide the optimization of electrode material design.     

Characteristics of polypyrrole electrodeposited onto roughened substrates composed of gold–silver bimetallic nanoparticles

In this work, the characteristics of polypyrrole (PPy) films electrodeposited onto an electrochemically roughened gold substrate with bimetallic silver and gold nanoparticles were first investigated. First, a silver substrate was roughened by a triangular‐wave oxidation–reduction cycle (ORC) in an aqueous solution containing 0.1 M HCl. Subsequently, a gold substrate was roughened by a similar ORC treatment in this used solution. The results revealed that the surface of the roughened gold substrate demonstrated two different kinds of deposition domains because of the modification of silver nanoparticles. Encouragingly, some novel characteristics of PPy deposited onto this substrate were observed, in comparison with those on the roughened gold substrate without the modification of silver nanoparticles. They included a denser and more compact surface morphology, higher oxidation degree, increased conductivity, and improved surface‐enhanced Raman scattering. Furthermore, the nucleation and growth mechanism for PPy electropolymerization on this silver‐modified roughened gold substrate was distinguishable from that on the unmodified one. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2724–2731, 2006     

A Simple and Fast Aqueous‐Phase Synthesis of Ultra‐Highly Concentrated Silver Nanoparticles and Their Catalytic Properties

A simple and fast synthetic route to ultra‐highly concentrated silver nanoparticles with long‐term stability by reducing AgNO₃ with ascorbic acid in the presence of polyethyleneimine (PEI) as a stabilizer in an aqueous phase is reported. The concentration of silver precursor was as high as 2000 mm (200 g of Ag nanoparticle per liter of water) and the reaction time was less than 10 min. The resulting silver nanoparticles show long‐term stability after two months of storage at room temperature without any signs of particle aggregation or precipitation in an aqueous phase. The successful ligand exchange of PEI‐stabilized silver nanoparticles to polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) without particle aggregation is also demonstrated. In addition, the catalytic activities of silver nanoparticles stabilized by various stabilizers prepared by the ligand exchange method was investigated. The PEI‐stabilized silver nanoparticles exhibited a higher stability than those of PEG‐ and PVP‐stabilized silver nanoparticles in the diffusion‐controlled catalytic reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄.     

Reactive surfactants in heterophase polymerization: Colloidal properties,film‐water absorption,and surfactant exudation

In this article the results obtained with latexes prepared by emulsion polymerization with a conventional surfactant and a polymerizable surfactant (surfmer) are presented. For this study, well‐defined styrene‐butylacrylate latexes with a conventional nonreactive surfactant (sodium dodecyl sulfate) and a maleate diester surfmer, of which films can be easily cast, were used. The latex with the surfmer was prepared following a surfmer addition strategy to maximize the amount of surfmer bound to the particle surface, and not buried in the particle interior. The latex properties in terms of mechanical stability, film‐water absorption, and film‐surfactant exudation were assessed and compared. The mechanical stability and water‐absorption properties of the latex prepared with surfmer were better than those of the latex with sodium dodecyl sulfate. Additionally, by using a surfmer the surfactant migration to the film‐substrate and film‐air interfaces can be inhibited. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2994–3000, 2002     

Role of sodium dodecylbenzenesulfonate in 2,2,6,6‐tetramethy‐1‐piperidinyloxy‐mediated styrene miniemulsion polymerization

In studying 2,2,6,6‐tetramethy‐1‐piperidinyloxy (TEMPO)‐mediated styrene miniemulsions, we have observed that the surfactant sodium dodecylbenzenesulfonate (SDBS) not only provides colloidal stability but also influences the rate of polymerization. Increasing the SDBS concentration results in higher polymerization rates, although the molecular weight distribution and particle size distribution are not significantly impacted. We have also examined another common sulfonate surfactant, DOWFAX 8390. In contrast to SDBS, DOWFAX 8390 does not affect the polymerization rate. Furthermore, DOWFAX‐stabilized polymerizations are slower than SDBS‐stabilized polymerizations. TEMPO‐mediated bulk styrene polymerizations are also accelerated significantly in the presence of SDBS. Although the mechanism for the rate acceleration is unknown, the experimental evidence suggests that SDBS is participating in the generation of radicals capable of propagating, thereby reducing the TEMPO concentration within the particles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5974–5986, 2006     

Preparation and characterization of Ag‐deposited aminosilane‐modified silicate by chemical reduction method

Nanocomposites based on silver (Ag) and organically modified silicate (Ormosil) were prepared by an in situ reduction method, in which silver nitrate, tetraethoxysilane and N‐[3‐(trimethoxysilyl)propyl]diethylenetriamine (ATS) acted as precursor, linker, and colloidal suspension stabilizer, respectively. The objective of the study was to produce silver nanoparticles through AgNO₃ chemical reduction in a continuous media, in which aminosilanes act as superficial modifiers of Ag nanoparticles, inhibiting their growth and preventing aggregation. The physical properties of the Ormosil/Ag composites were examined using NMR, electron spin resonance, scanning electron microscope, transmission electron microscope, and thermal gravimetric analysis spectroscopy, the results of which indicated that Ag was incorporated in the Ormosil matrix after impregnation. The Ag content and surface morphology of the Ormosil/Ag composites depended on the initial concentration of AgNO₃. The antibacterial effects of the Ormosil/Ag composites were assessed by the zone of inhibition and plate‐counting methods, and an excellent antibacterial performance was discovered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Templated synthesis of silver nanoparticles in amphiphilic poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) comb copolymer

In this study, poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐graft‐poly(oxyethylene methacrylate), P(VDF‐co‐CTFE)‐g‐POEM, an amphiphilic comb copolymer with hydrophobic P(VDF‐co‐CTFE) backbone and hydrophilic POEM side chains at 73:27 wt % was synthesized. The POEM side chains were grafted from the P(VDF‐co‐CTFE) mainchain backbone via atom transfer radical polymerization (ATRP) using direct initiation of the chlorine atoms in CTFE units. Synthesis of microphase‐separated P(VDF‐co‐CTFE)‐g‐POEM comb copolymer was successful, as confirmed by nuclear magnetic resonance (¹H NMR), FTIR spectroscopy, and transmission electron microscopy (TEM). Nanocomposite films were prepared using the comb copolymer as a template film and the in situ reduction of AgCF₃SO₃ precursor to silver nanoparticles under UV irradiation. Silver nanoparticles with 4–8 nm in average size were in situ created in the solid state template film, as revealed by TEM, UV–visible spectroscopy, and wide angle X‐ray scattering (WAXS). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) presented the selective incorporation and the in situ growth of silver nanoparticles within the hydrophilic POEM domains of microphase‐separated comb copolymer film. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 702–709, 2008     

Size‐controlled synthesis of soluble‐conjugated microporous polymer nanoparticles through sonogashira polycondensation in confined nanoreactors

Soluble conjugated polymeric nanoparticles were synthesized through Sonogashira polycondensation between different combinations of multifunctional alkynes and aryl halides in structurally well‐defined mesoporous reactors. The growth of the polymeric nanoparticles was controlled by the spatial confinement of the nanoreactors, giving conjugated polymeric nanoparticles with narrow size distribution centered at 5 nm. All the obtained polymers are freely soluble in common solvents and can be fabricated into thin film. Both of the solution and thin film prepared from these polymeric nanoparticles were highly fluorescent, endowing them potential applications in light emitting and other optoelectronic fields. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2285–2290     

High‐thermally stable and high‐bandwidth graded index plastic optical fiber for vehicle networks

Radial refractive index profiles within the graded index plastic optical fiber (GI‐POF) is formed by adding a dopant to a polymer. This addition of the dopant significantly decreased the T_g of the polymer due to the plasticization. This disadvantage made the installation of the GI‐POF difficult, especially in vehicle networks in which high thermal stability is required. We have suggested 9‐bromophenanthrene (BPT) as a novel dopant induced less plasticization for poly(methyl methacrylate) (PMMA) than the conventional dopants. However, although the fabricated GI‐POF using BPT had high enough thermal stability for vehicle networks, the attenuation was 800 dB/km and it could not be used. This high attenuation was caused by contaminant in the fabrication process of fibers. In this study, we succeeded to fabricate a GI‐POF with low‐attenuation and high‐thermal stability using highly pure BPT. Its attenuation was improved to 240 dB/km at 650 nm, which was enough transparency for vehicle networks. The T_g of the GIPOF was improved to 107 °C from 90 °C. The thermal stability of the GI‐POF below 85 °C/dry and 75 °C/85%RH was demonstrated to be as high as that of the commercially available step index POF. The bandwidth of the GI‐POF could be estimated over 4.0 GHz for the 50‐m fiber. These results demonstrated that our GI‐POF should qualify to be used in vehicle network. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1464–1469, 2011     

Polymerization of high‐solids‐content acrylic latexes using a nonionic polymerizable surfactant

Stable high‐solids‐content methyl methacrylate/butylacrylate latexes with small particle sizes (in the range of 150–180 nm) were obtained with a nonionic polymerizable surfactant (surfmer). Three percent of surfmer with respect to monomer was proven to be enough for the stabilization of the latexes. The influence of different operational variables on the stabilization of the final latex was analyzed, and the conditions needed to obtain coagulum‐free latex were assessed. The inorganic potassium persulfate/sodium metabisulfite initiator system provided better stability than the organic tert‐butyl hydroperoxide/ascorbic acid as a result of the end groups. In addition, the feeding of acrylic acid during the second half of the polymerization improved the stability of the final latex. The reduction of the feeding time was effective in the stabilization. Proof of the surfmer incorporation into the particles is presented. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1552–1559, 2002