Novel organosoluble polynorbornene bearing a polar,pendant, ester‐bridged epoxy group via living ring‐opening metathesis polymerization

A novel organosoluble polynorbornene bearing a polar, pendant, ester‐bridged epoxy group [poly(oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate) (polyOMMC)] was prepared via the living ring‐opening metathesis polymerization (ROMP) of active norbornenes with a Ru catalyst. PolyOMMC exhibited excellent solubility in a variety of solvents. The number‐average molecular weight of polyOMMC linearly increased with the [M]/[I] ratio (where [M] is the monomer concentration and [I] is the initiator concentration), and a narrow polydispersity of 1.09–1.19 was observed; this was considered a living polymerization. When ROMP of oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate with [M]/[I] = 350 was carried out at 30 °C in CH₂Cl₂, the number‐average molecular weight (7.01 × 10⁴; polydispersity index = 1.07) was close to the calculated molecular weight (7.28 × 10⁴), and a diblock copolymer was observed after the addition of another monomer ([M]/[I] = 350) with an increase in the number‐average molecular weight (1.60 × 10⁵; polydispersity index = 1.11), which was close to the calculated molecular weight (1.61 × 10⁵). The modified polynorbornenes retained good solubility in methylene chloride, tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, N,N‐dimethylacetamide, and N‐methyl‐2‐pyrrdione. High‐performance polynorbornenes with active epoxy groups could be designed with great potential for applications in photoresists, UV curing, and elastomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4428–4434, 2006     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Norbornene derivatives from a metal‐free,strain‐promoted cycloaddition reaction: New building blocks for ring‐opening metathesis polymerization reactions

The preparation of new ring opening metathesis polymerization (ROMP) monomers using a 1,3‐dipolar cycloaddition between aryl azides and norbornadiene is described. Various norbornenetriazolines, obtained through a solvent‐and catalyst‐free reaction, can subsequently be incorporated into polymer backbones through ROMP reactions. Furthermore, thermal decomposition of the triazoline moiety can allow for further polymer functionalization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2357–2362     

Novel active ester‐bridged copolynorbornene materials containing terminal functional hydroxyl,amino, methacryloyl,or ammonium groups via ring‐opening metathesis polymerization

Several random and block copolynorbornenes with side chains containing terminal hydroxyl, amino, methacryloyl or ammonium groups were derived from the functional alkyl ester‐containing norbornenes by ring‐opening metathesis polymerization (ROMP). The main chain of ROMP‐type polynorbornene had a more important role for glass‐transition temperature in comparison with vinyl addition polymerization. There is little effect on glass‐transition temperature (about ?39 °C) of polynorbornenes with different length of alkyl side chain. The organosoluble copolynorbornenes with active crosslinkable methylacryloyl side chains derived from functional hydroxyl group were prepared to improve the thermal stability of poly(methyl methacrylate) [decomposition temperature (T_d)^10% = 325 °C in nitrogen] by forming networked AB crosslinked polymer (T = 367 °C in nitrogen). The sizes of nanometer‐scale polymeric micelles of block copolymers having hydrophobic alkyl ester and hydrophilic ammonium groups were measured in the range of 11–25 nm by scanning electron microscopy. These polymeric materials with various functional groups or amphiphilic architectures are accessible by ROMP, whose topology makes them particularly attractive for application potential such as biomedical and photoelectric materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4233–4247, 2005     

Preparation of neutrally colorless,transparent polynorbornenes with multiple redox‐active chromophores via ring‐opening metathesis polymerization toward electrochromic applications

A new electrochromic norbornene derivative containing triphenylamine groups (NBDTPAC8) was synthesized using norbornene amine and bromotriphenylamine. NBDTPAC8 was used in ring‐opening metathesis polymerization to obtain poly(NBDTPAC8) using different Grubbs' catalysts and followed by hydrogen reduction to obtain poly(HNBDTPAC8). The glass transition temperatures (T_g) of poly(NBDTPAC8) and hydrogenated poly(HNBDTPAC8) were 132 and 89 °C, respectively. Poly(HNBDTPAC8) film exhibited a fluorescence maximum around 416 nm with a quantum yield of up to 60%. Hydrogenated poly(HNBDTPAC8) film showed excellent transparency (up to 93%). Poly(HNBDTPAC8) showed cyclic voltammetric and electrochromic behaviors similar to those of poly(NBDTPAC8). The cyclic voltammogram of a poly(HNBDTPAC8) film cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited three reversible oxidation redox couples at 0.69, 0.94 and 1.38 V versus Ag/Ag⁺ in an acetonitrile solution. The electrochromic characteristics of poly(HNBDTPAC8) showed excellent stability and reversibility, with multi‐staged color changes from its colorless neutral form to green, light blue and dark blue upon the application of potentials ranging from 0 to 1.60 V. The color switching time and bleaching time of the poly(HNBDTPAC8) film were 6.2 s and 4.3 s at 1175 nm and 6.6 s and 4.4 s at 970 nm, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization

We present an approach to the synthesis of biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization; these nanoparticles may serve as novel scaffolds for the multivalent display of ligands. The nanoparticles are formed by the self‐assembly of diblock copolymers composed of a hydrophobic block and a hydrophilic activated block that can be functionalized with thiolated ligands in aqueous media. The activated block enables control over the orientation of the displayed ligands, which may be sugars, peptides, or proteins engineered to contain cysteine residues at suitable locations. The nanoparticle diameter can be varied over a wide range through changes in the composition of the block copolymer, and biofunctionalization of the nanoparticles has been demonstrated by the attachment of a peptide previously shown to inhibit the assembly of anthrax toxin. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 928–939, 2006     

Synthesis and optoelectronic properties of novel organosoluble polynorbornenes containing asymmetric pyrenyl and electroactive substituents via ring‐opening metathesis polymerization

Novel polynorbornenes, poly(NBPYTPA), and poly(HNBPYTPA), containing chromophoric and electroactive groups were synthesized by ring‐opening metathesis polymerization using Grubbs' catalysts and followed hydrogenation, respectively. The glass transition temperatures (T_g) of poly(NBPYTPA) and hydrogenated poly(HNBPYTPA) were 195 and 165 °C, respectively. The 10% weight‐loss temperatures of hydrogenated poly(HNBPYTPA) and poly(NBPYTPA) were up to 465 and 420 °C, respectively. The photoluminescence emission spectra of poly(HNBPYTPA) showed strong solvatochromic property, revealing that poly(HNBPYTPA) underwent remarkable bathochromic shifts with an increase in solvent polarity. The cyclic voltammogram of poly(HNBPYTPA) film cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.8 and 1.2 V versus Ag/Ag⁺ in acetonitrile solution. The electrochromic characteristics of poly(HNBPYTPA) showed reversibility, with color changes from yellow to blue and then to red upon the application of potentials from 0 to 1.3 V. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2011     

Ruthenium‐based metathesis initiators: Development and use in ring‐opening metathesis polymerization

For many years, olefin metathesis has been a central topic of industrial and academic research because of its great synthetic utility. The employed initiators cover a wide range of compounds, from simple transition‐metal salts to highly sophisticated and well‐defined alkylidene complexes. Currently, ruthenium‐based catalysts are at the center of attention because of their remarkable tolerance toward oxygen, moisture, and numerous functionalities. This article focuses on recent developments in the field of ring‐opening metathesis polymerization using ruthenium‐based catalysts. ruthenium‐based initiators and their applications to the preparation of advanced polymeric materials are briefly reviewed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2895–2916, 2002     

Synthesis and self assembly of eosin functionalized amphiphilic block‐random copolymers prepared by ring opening metathesis polymerization

Self assembly of block copolymers has gained considerable attention because of its potential use in various areas such as medical and biomedical applications, nanotechnology, and electronics. Herein, we present the synthesis and characterization of amphiphilic block‐random copolymers with a covalently incorporated pH‐sensitive dye, namely eosin. Ring opening metathesis polymerization was chosen for the preparation of well defined block copolymers and block‐random copolymers using a modified “2nd Generation Grubbs” initiator. The self assembly behavior of the block‐random copolymers in solution was studied by dynamic light scattering and small angle X‐ray scattering (SAXS). The influence of dye incorporation on the result of the self assembly process in methanol and ethanol was investigated and a subtle interplay of the nature of the selective solvent, the chain‐length of the block copolymer and the position of the dye within the polymer chain was established. Structural investigations using SAXS revealed a spherical shape and a core‐shell structure of exemplary block and block‐random copolymer micelles. UV–vis absorption and photoluminescence measurements revealed similar optical properties for polymer micelles in methanol compared to polymer solutions in THF. The pH‐sensitive behavior of the eosin dye was preserved within the micelles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 401–413, 2008     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Glycoconjugated polymer: Synthesis and characterization of poly(vinyl saccharide)‐block‐polystyrene‐block‐poly(vinyl saccharide) as an amphiphilic ABA triblock copolymer

Styrene (St) was polymerized with α,α′‐bis(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)‐1,4‐diethylbenzene ( 1 ) as an initiator (bulk, [St]/] 1 ] = 570) at 120 °C for 5.0 h to obtain polystyrene having 2,2,6,6‐tetramethylpiperidiloxy moieties on both sides of the chain ends ( 2 ) with a number‐average molecular weight (M_n) of 14,300 and a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.14. 4‐Vinylbenzyl glucoside peracetate ( 3a ) was polymerized with 2 as a macromolecular initiator and dicumyl peroxide (DCP) as an accelerator in chlorobenzene at 120 °C. The polymerization with the [ 3a ]/[ 2 ]/[DCP] ratio of 30/1/1.2 for 5 h afforded a product in a yield of 73%; it was followed by purification with preparative size exclusion chromatography to provide the ABA triblock copolymer containing the pendant acetyl glucose on both sides of the chain ends ( 4a ; M_n = 21,000, M_w/M_n = 1.16). Similarly, the polymerization of 4‐vinylbenzyl maltohexaoside peracetate produced the ABA triblock copolymer containing the pendant acetyl maltohexaose on both side of the chain end ( 4b ; M_n = 31,800, M_w/M_n = 1.11). Polymers 4a and 4b were modified by deacetylation into amphiphilic ABA triblock copolymers containing the pendant glucose and maltohexaose as hydrophilic segment, 5a and 5b , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3978–3985, 2006     

Enolesters as chain end-functionalizing agents for the living ring opening metathesis polymerization

Functional enolethers have previously been used to introduce functional end groups at the chain end of ruthenium carbene complex initiated living ring opening metathesis polymers. Here, we investigated whether the weaker π-donating enolesters could equally be used in regio selective reactions with ruthenium carbene complexes and thus as polymer end-functionalization reagents. Enolesters such as vinyl acetate, butenyl acetate, 3-(4-(tert-butoxy)phenyl)propenyl acetate and 6-(((benzyloxy)carbonyl)amino)hex-1-en-1-yl acetate were used as living ROMP terminating agents. All gave the expected end groups proving that enolesters are synthetically easily accessible targets for living ROMP end-functionalization. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2983–2990     

ABA triblock copolymers with a ring‐opening metathesis polymerization/macromolecular chain‐transfer agent approach

Block copolymers containing polystyrene and polycyclooctene were synthesized with a ring‐opening metathesis polymerization/chain‐transfer approach. Polystyrene, containing appropriately placed olefins, was prepared by anionic polymerization and served as a macromolecular chain‐transfer agent for the ring‐opening metathesis polymerization of cyclooctene. These unsaturated polymers were subsequently converted to the corresponding saturated triblock copolymers with a simple heterogeneous catalytic hydrogenation step. The molecular and morphological characterization of the block copolymers was consistent with the absence of significant branching in the central polycyclooctene and polyethylene blocks [high melting temperatures (114–127 °C) and levels of crystallinity (17–42%)]. A dramatic improvement in both the long‐range order and the mechanical properties of a microphase‐separated, symmetric polystyrene–polycyclooctene–polystyrene block copolymer sample was observed after fractionation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 361–373, 2007     

Thio‐bromo “Click,” post‐polymerization strategy for functionalizing ring opening metathesis polymerization (ROMP)‐derived materials

The use of a thio‐bromo click strategy as an efficient postpolymerization tool is described. Norbornene derivatives bearing an α‐bromo ester could be polymerized using Grubbs 2^nd generation initiator to provide α‐bromo ester‐containing homo‐and block copolymers that could be efficiently functionalized through reactions with various thiols. A one‐pot strategy was also used, in which up to four different thiols were reacted simultaneously. This chemistry could also be used as an efficient cross‐linking strategy to form ROMP‐based gels as well as a tool for terminal functionalization of polypropylene‐based oligomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 179–185     

Block copolymer nanoparticles of controlled sizes via ring‐opening metathesis polymerization

This article describes the formation and characterization of self‐assembled nanoparticles of controlled sizes based on amphiphilic block copolymers synthesized by ring‐opening metathesis polymerization. We synthesized a novel hydrophobic derivative of norbornene; this monomer could be polymerized using Grubbs' catalyst [Cl₂Ru(CHPh)(PCy₃)₂] forming polymers of controlled molecular weight. We synthesized amphiphilic block copolymers of controlled composition and showed that they assemble into nanoparticles of controlled size. The nanoparticles were characterized using dynamic light scattering and transmission electron microscopy. Tuning the composition of the block copolymer enables the tuning of the diameters of the nanoparticles in the 30‐ to 80‐nm range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3352–3359, 2004     

RAFT polymerization of activated 4‐vinylbenzoates

The reversible addition fragmentation chain transfer (RAFT) polymerization of five active ester monomers based on 4‐vinylbenzoic acid had been investigated. Pentafluorophenyl 4‐vinylbenzoate could be polymerized under RAFT conditions yielding polymers with very good control over molecular weight and narrow molecular weight distributions. Following the synthesis of diblock copolymers consisting of polystyrene, polypentafluorostyrene, poly(4‐octylstyrene), or poly(4‐acetoxystyrene) as an inert block and poly(pentafluorophenyl 4‐vinylbenzoate) as a reactive block was successfully performed. The diblock copolymer poly(pentafluoro styrene)‐block‐poly(pentafluorophenyl 4‐vinylbenzoate) had been analyzed by ¹⁹F NMR spectroscopy in solution, demonstrating the synthetic potential of pentafluorophenyl 4‐vinylbenzoate as an extremely valuable monomer for the synthesis of highly functionalized polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1696–1705, 2009     

High glass transition and thermally stable polynorbornenes containing fluorescent dipyrene moieties via ring‐opening metathesis polymerization

A high‐glass‐transition‐temperature polynorbornene, poly(NBEDPY), containing chromophore groups was synthesized by ring‐opening metathesis polymerization (ROMP) using Grubbs' catalysts; poly(HNBEDPY) was obtained by the reduction of poly(NBEDPY). The glass transition temperatures (T_g) of poly(NBEDPY) and hydrogenated poly(HNBEDPY) were as high as 250 °C and 220 °C, respectively, because of the rigid dipyrene groups, which are higher than those of commercially available ring‐opened hydrogenated polynorbornenes (JSR ARTON®; 120–165 °C). The 10% weight‐loss temperatures of hydrogenated poly(HNBEDPY) and poly(NBEDPY) were up to 450 °C and 400 °C, respectively. A hydrogenated poly (HNBEDPY) film showed excellent transparency (over 91%). The photoluminescence emission spectra of poly(HNBEDPY) showed strong solvent‐polarity dependence, revealing that poly (HNBEDPY) underwent remarkable bathochromic shifts with an increase in solvent polarity. Poly(HNBEDPY) also showed remarkable fluorescent solvatochromism (blue in toluene, greenish yellow in dimethyl sulfoxide). The cyclic voltammogram of poly(HNBEDPY) film cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited one reversible oxidation redox couple at 0.55 V versus Ag/Ag⁺ in acetonitrile solution. The electrochromic characteristics of poly(HNBEDPY) showed reversibility, with a color change from its green neutral form to dark red upon the application of potentials from 0 to 1.0 V. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymer‐Bound,Amphiphilic Hoveyda‐Grubbs‐Type Catalyst for Ring‐Closing Metathesis in Water

Summary: We report on the synthesis of a new amphiphilic, polymer‐bound variant of the Hoveyda‐Grubbs catalyst via the coupling reaction of a carboxylic acid‐functionalized poly(2‐oxazoline) block copolymer with 2‐isopropoxy‐5‐hydroxystyrene and subsequent reaction of the resulting macroligand with a second generation Grubbs catalyst. For the benchmark, the substrate diethyl diallylmalonate was studied in the ring‐closing metathesis (RCM) reaction and a turn‐over number (TON) of up to 390 in water was achieved. To the best of our knowledge, this is the highest value for any aqueous RCM reaction to date. For the first time, recycling of a ruthenium initiator in an aqueous RCM reaction has been successful to some extent. In addition, the micellar conditions accelerate the conversion of the hydrophobic diene and at the same time stabilize the active alkylidene species, although competing decomposition of the catalyst in water still impairs the catalyst performance. Residual ruthenium content was determined to be below 1 ppm in the product suggesting a very low leaching of the polymeric catalyst system.

Simplified chemical structure of the amphiphilic, polymer‐bound Grubbs‐Hoveyda catalyst.     

UV‐induced crosslinking of ring opening metathesis block copolymer micelles

Statistical and amphiphilic block copolymers bearing cinnamoyl groups were prepared by ring opening metathesis polymerization (ROMP). The UV‐induced [2 + 2] cycloaddition reaction of polymer bound cinnamic acid groups was studied in polymer thin films as well as in block copolymer micelles. In both cases, exposure to UV‐light for 10 min led to a crosslinking conversion of about 60%, as determined by FT‐IR spectroscopy and UV–vis absorption measurements. Time based IR‐spectroscopy revealed a maximum conversion of 78% reached after an irradiation time of about 16 min. For micelles obtained from polymers bearing 5 mol % or more cinnamoyl groups, the crosslinking reaction proceeded smoothly, yielding in crosslinked particles which were stable in a non‐selective solvent (CHCl₃). Diameters determined by dynamic light scattering in the selective solvent (MeOH) were similar for both, non‐crosslinked and crosslinked micelles, whereas diameters of crosslinked micelles in the non‐selective solvent (CHCl₃) were significantly larger compared to MeOH samples. This strategy of direct self assembly of block‐copolymers in a selective solvent followed by “clean” crosslinking, without the need for additional crosslinking reagents or crosslinking initiators, provides a straight forward approach toward ROMP‐based polymeric nano‐particles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2402–2413, 2008     

9‐Bromoanthracene photodimers as initiators in controlled radical polymerization: Silane radical atom abstraction coupled with nitroxide mediated polymerization

Slow initiation relative to propagation has previously prevented photodimers of 9‐bromoanthracene or 9‐chloroanthracene, formed by [4 + 4] photocyclization reactions of the analogous 9‐haloanthracene, from being viable initiators in atom transfer radical polymerization (ATRP) reactions. The resulting polymers were found to possess high polydispersity index (PDI) values, much higher than expected number average molecular weight (M_n) values, with the reaction displaying a nonlinear relationship between monomer conversion and M_n. We report here the use of silane radical atom abstraction (SRAA) to create initiating bridgehead radicals in the presence of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) to mediate the polymerization. When using SRAA coupled with nitroxide mediated polymerization, a dramatic decrease in PDI values was observed compared with analogous ATRP reactions, with M_n values much closer to those anticipated based on monomer‐to‐initiator ratios. Analysis using UV‐Vis spectroscopy indicated only partial anthracene labeling (～ 25%) on the polymers, consistent with thermolysis of the anthracene photodimer coupled with competition between initiation from the bridgehead photodimer radical and silane‐based radical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6016–6022, 2008