Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002     

Synthesis and characterization of fluorene end‐labeled polystyrene with atom transfer radical polymerization

Fluorene end‐labeled polystyrene was prepared by atom transfer radical polymerization with 9‐bromofluorene as the initiator. Reactions were carried out in bulk or tetrahydrofuran solutions at temperatures of 80 °C or above. Analysis by gel permeation chromatography indicated that the polymers formed had low polydispersities with molecular weights consistently 2–5 times higher than calculated based on monomer‐to‐initiator ratios. Coupling of two fluorenyl radicals, formed by activation of the 9‐bromofluorene, was found to compete with initiation, leading to the higher‐than‐expected molecular weight values while giving rise to a fluorene dimer. UV–vis spectrometry indicated near‐quantitative fluorene labeling of the polystyrene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2657–2665, 2005     

Synthesis of well‐defined three‐armed polystyrene having thiourethane–isocyanurate as the core structure derived from trifunctional five‐membered cyclic dithiocarbonate

The synthesis of a three‐armed polymer with an isocyanurate–thiourethane core structure is described. Monofunctional reversible addition–fragmentation chain transfer (RAFT) agent 2 and trifunctional RAFT agent 5 were prepared from mercapto‐thiourethane and tris(mercapto‐thiourethane), which were obtained from the aminolysis of mono‐ and trifunctional five‐membered cyclic dithiocarbonates, respectively. The radical polymerization of styrene in the presence of 2,2′‐azobis(isobutyronitrile) and RAFT agent 2 in bulk at 60 °C proceeded in a controlled fashion to afford the corresponding polystyrene with desired molecular weights (number‐average molecular weight = 3000–10,100) and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.13). On the basis of the successful results with the monofunctional RAFT agents, three‐armed polystyrene with thiourethane–isocyanurate as the core structure could be obtained with trifunctional RAFT agent 5 in a similar manner. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5498–5505, 2005     

Synthesis of highly water soluble C60 end‐capped vinyl ether oligomers with well‐defined structure

Highly water soluble [60]fullerene (C₆₀) end‐capped vinyl ether (VE) oligomers with well‐defined structure were synthesized by living cationic polymerization technique. The addition reaction between 1‐octynylfulleride anion and oligomeric cationic species of VEs with pendant acetoxyl or malonic ester functions afforded the precursor C₆₀ end‐capped oligomers. The living VE oligomers were prepared by living cationic polymerization of diethyl 2‐(vinyloxy)ethylmalonate (VOEM) and 2‐acetoxyethyl vinyl ether (AcOVE) by the CH₃CH(OR)Cl/ZnI₂ [R = CH₂CH₂OCOCH₃ and CH₂CH₂CH(COOEt)₂, respectively] initiating system. The precursors were obtained as dark brown gummy solid in 33 and 72% yield for AcOVE and VOEM, respectively. UV‐vis and ¹³C NMR spectroscopy indicated the formation of 1,2‐disubstituted dihydrofullerene derivatives. Hydrolysis of the precursors proceeded quantitatively to give the water‐soluble C₆₀ end‐capped oligomers having oligo(sodium 2‐vinyloxyethylmalonate) [oligo(VOEMNa)] and oligo(2‐hydroxyethyl vinyl ether) [oligo(HOVE)] moieties. Solubility measurements revealed the water‐soluble C₆₀ end‐capped oligomer with oligo(VOEMNa) chain to have the excellent aqueous solubility compared to that of the water‐soluble C₆₀ derivatives thus far known; the maximum solubility in water is 96.6 mg/mL, which corresponds to 25.9 mg/mL of the C₆₀ moiety. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3578–3585, 2000     

Synthesis of well‐defined photoresist materials by SET‐LRP

Single electron transfer‐living radical polymerization (SET‐LRP) provides an excellent tool for the straightforward synthesis of well‐defined macromolecules. Heterogeneous Cu(0)‐ catalysis is employed to synthesize a novel photoresist material with high control over the molecular architecture. Poly(γ‐butyrolactone methacrylate)‐co‐(methyladamantly methacrylate) was synthesized. Kinetic experiments were conducted demonstrating that both monomers, γ‐butyrolactone methacrylate (GBLMA) and methyl adamantly methacrylate (MAMA), are successfully homopolymerized. In both cases polymerization kinetic is of first order and the molecular weights increase linearly with conversion. The choice of a proper solvent was decisive for the SET‐LRP process and organic solvent mixtures were found to be most suitable. Also, the kinetic of the copolymerization of GBLMA and MAMA was investigated. Following first order kinetics in overall monomer consumption and exhibiting a linear relationship between molecular weights and conversion a “living” process was established. This allowed for the straightforward synthesis of well‐defined photoresist polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2251–2255, 2010     

Synthesis of well‐defined naphthalene and photo‐labile group‐labeled polystyrene via ATRP

The atom transfer radical polymerizations of styrene were successfully carried out in bulk and solution, respectively, at 115 °C, with a novel photoiniferter reagent, (1‐naphthyl)methyl N,N‐diethyldithiocarbamate (NMDC), as an initiator in the presence of copper (I) bromide and N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results showed that NMDC was an effective initiator with high initiation efficiency for ATRP of St. The polymerization rate was first‐order with respect to the monomer concentration and the molecular weights of the obtained polystyrene (PS) increased linearly with the monomer conversion, with very narrow molecular weight distributions (M_w/M_n = 1.07–1.29). The functionalized naphthalene‐labeled PS bearing N,N‐(diethylamino)dithiocarbamoyl group which was confirmed by ¹H NMR analysis, and chain extension of the PS exhibited fluorescence and ultraviolet absorption in chloroform (CHCl₃). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 510–518, 2006     

Synthesis and applications of novel fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments: a new approach to the surface arrangement of diphenylacetylene segments on the traditional organic polymer

Fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments [R_F‐(DPMA)_x‐(Co‐M)_y‐R_F] were prepared by reaction of fluoroalkanoyl peroxide with 4‐(phenylethynyl)phenyl methacrylate (DPMA) and radical polymerizable comonomers such as N,N‐dimethylacrylamide (DMAA) and acryloylmorpholine (ACMO) under very mild conditions. Fluorinated cooligomers containing diphenylacetylene segments thus obtained exhibited a good solubility in a variety of organic solvents. These fluorinated cooligomers were also applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate) (PMMA) to exhibit not only a good surface active property imparted by fluorine but also a fluorescent characteristic related to diphenylacetylene segments on their surface. In addition, these fluorinated cooligomers could form the nanometer size‐controlled fluorinated molecular aggregates in chloroform. Interestingly, some benzenes and biphenyl (BP) derivatives could interact with these fluorinated oligomeric aggregates as guest molecules, and in particular 2‐chloro‐5‐nitrobenzotrifluoride (CNB) was most effective for enhancing the fluorescent intensity of these guest molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Synthesis of well‐defined polymeric activated esters

Monomers bearing an activated ester group can be polymerized under various controlled polymerization techniques, such as ATRP, NMP, RAFT polymerization, or ROMP. Combining the functionalization of polymers via polymeric activated esters with these controlled polymerization techniques generate possibilities to realize highly functionalized polymer architectures. Within this highlight two different research areas of activated esters in polymer science will be discussed: (i) the preparation of defined reactive polymer architectures by controlled polymerization techniques and (ii) the preparation of defined reactive thin films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6677–6687, 2008     

Structural and end‐group effects on bulk and surface properties of hyperbranched poly(urea urethane)s

The hydroxy end groups of aromatic and aliphatic hyperbranched poly‐(urea urethane)s prepared with an AA* + B*B₂ one‐pot method were modified with phenylisocyanate, butylisocyanate, and stearylisocyanate. The success of the modification reaction was verified with ¹H NMR and IR spectroscopy. Linear model poly‐(urea urethane)s were prepared, too, for comparison. The bulk properties of OH functionalized hyperbranched poly(urea urethane)s, compared with those of linear analogues and modified hyperbranched poly(urea urethane)s, were studied with differential scanning calorimetry, thermogravimetric analysis, and temperature‐dependent Fourier transform infrared measurements. Transparent and smooth thin films could be prepared from all polymer samples and were examined with a light microscope, a microglider, and an atomic force microscope. The properties of the polymer surface were examined by measurements of the contact angle and zeta potential. For all samples, the properties were mainly governed by the strong interactions of the urea and urethane units within the backbone, whereas the influence of the nature of the end groups and of the branched structure was reduced in comparison with other hyperbranched polymer systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3376–3393, 2005     

Synthesis of well‐defined glycidyl methacrylate based block copolymers with self‐activation and self‐initiation behaviors via ambient temperature atom transfer radical polymerization

Well‐defined glycidyl methacrylate (GMA) based di‐ and triblock copolymers, with self‐activation and self‐initiation behaviors by incorporation of 2‐(diethylamino) ethyl methacrylate (DEA) blocks, were synthesized via ambient temperature atom transfer radical polymerization (ATRP). The stability of the GMA pendant oxirane rings in tertiary amine environments at ambient temperature was investigated. More importantly, both self‐activation behavior in oxirane ring opening addition reaction and self‐initiation behavior in post‐cure oxirane ring opening crosslinking of these block copolymers were evidenced by ¹H NMR studies. The results demonstrated that the reactivity of pendent oxirane rings was strongly dependant on the nucleophilicity and steric hindrance of tertiary amine moieties and temperature. This facilitated the synthesis of well‐defined block copolymers of GMA and DEA via sequential monomer addition ATRP, particularly for polymerization of GMA monomer at ambient temperature. Moreover, these one‐component GMA based block polymers have novel self‐activation and self‐initiation properties, rendering some potential applications in both enzyme immobilization and GMA‐based thermosetting materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2947–2958, 2007     

Synthesis of polyethylene‐grafted multiwalled carbon nanotubes via a peroxide‐initiating radical coupling reaction and by using well‐defined TEMPO and thiol end‐functionalized polyethylenes

Polyethylene (PE), alkoxyamine‐ and thiol‐terminated PEs (PE‐TEMPO and PE‐SH, respectively) can be converted to macroradicals using a peroxide, a thermal cleavage of the alkoxyamine and a hydrogen transfer reaction of the thiol, respectively. The addition of these macroradicals to multiwalled carbon nanotubes (MWCNTs) were compared by performing grafting reactions at 160 °C in 1,3‐dichlorobenzene as solvent. Raman spectroscopy was utilized to follow the introduction of PE on the MWCNTs' surface while thermogravimetric and elemental analysis indicated the extent of this grafting. The grafting ratio was found to be in the range of 19–36 wt %. PE‐functionalized MWCNTs were imaged by transmission electronic microscopy showing a PE layer with various thicknesses covering the surface of nanotubes. It was found that higher levels of grafting were obtained using PE‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy and PE‐SH rather than a radical grafting reaction in which dicumyl peroxide, PE, and MWCNTs were reacted. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Synthesis and characterization of polyethylene‐g‐polystyrene as the compatibilizer for polypropylene/ Polystyrene blends

Polyethylene‐g‐polystyrene (PE‐g‐PS) was synthesized as a compatibilizer for polypropylene/polystyrene­(PP/PS) blends by the living radical polymerization of styrene with polyethylene‐co‐glycidylmethacrylate (PE‐co‐GMA). The compatibilizer effect of PE‐g‐PS on the morphology and thermal properties of PP/PS blends was investigated. The crystalline temperature of PP in PP/PS blends decreased with increasing PE‐g‐PS contents. Morphologies of PP/PE‐g‐PS/PS blends showed much better dispersion of each domain for higher PE‐g‐PS contents. The molecular weight of PS segment in PP/PE‐g‐PS/PS blend was increased by addition of styrene monomer during the post melt blending process where post living radical polymerization reaction proceeded. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of well‐defined polyacrylonitrile by ICAR ATRP with low concentrations of catalyst

Acrylonitrile (AN) was polymerized by initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP). The effect of the ligand, tris(2‐pyridylmethyl)amine (TPMA) and N,N,N',N'‐tetrakis(2‐pyridylmethyl)ethylenediamine (TPEN), in the Cu‐based catalyst, the amount of catalyst, several alkyl halide initiators, targeted degree of polymerization, and amount of azobisisobutyronitrile (AIBN) added were studied. It was determined that the best conditions utilized 50 ppm of CuBr₂/TPMA as the catalyst and 2‐bromopropionitrile (BPN) as the initiator. This combination resulted in 46% conversion in 10 h and polyacrylonitrile (PAN) with the narrowest molecular weight distribution (M_w/M_n = 1.11–1.21). Excellent control was maintained after lowering the catalyst loading to 10 ppm, with 56% conversion in 10 h, experimental molecular weight closely matching the theoretical value, and low dispersity (M_w/M_n < 1.30). Catalyst loadings as low as 1 ppm still provided well‐controlled polymerizations of AN by ICAR ATRP, with 65% conversion in 10 h and PAN with relatively low dispersity (M_w/M_n = 1.41). High chain end functionality (CEF) was confirmed via ¹H NMR analysis, for short PAN chains, and via clean chain extensions with n‐butyl acrylate (BA). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1961–1968     

Synthesis and thermoresponsive property of end‐functionalized poly(N‐isopropylacrylamide) with pyrenyl group

N–Isopropylacrylamide (NIPAM) was polymerized using 1‐pyrenyl 2‐chloropropionate (PyCP) as the initiator and CuCl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as the catalyst system. The polymerizations were performed using the feed ratio of [NIPAM]₀/[PyCP]₀/[CuCl]₀/[Me₆TREN]₀ = 50/1/1/1 in DMF/water of 13/2 at 20 °C to afford an end‐functionalized poly(N‐isopropylacrylamide) with the pyrenyl group (Py–PNIPAM). The characterization of the Py–PNIPAM using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry provided the number–average molecular weight (M_n,MS). The lower critical solution temperature (LCST) for the liquid–solid phase transition was 21.7, 24.8, 26.5, and 29.3 °C for the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000, respectively; hence, the LCST was dramatically lowered with the decreasing M_n,MS. The aqueous Py–PNIPAM solution below the LCST was characterized using a static laser light scattering (SLS) measurement to determine its molar mass, M_w,SLS. The aqueous solutions of the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000 showed the M_w,SLS of 586,000, 386,000, 223,000, and 170,000, respectively. Thus, lowering the LCST for Py–PNIPAM should be attributable to the formation of the PNIPAM aggregates. The LCST of 21.7 °C for Py–PNIPAM with the M_n,MS of 3000 was effectively raised by adding β‐cyclodextrin (β‐CD) and reached the constant value of ～26 °C above the molar ratio of [β‐CD]/[Py–PNIPAM] = 2/1, suggesting that β‐CD formed an inclusion complex with pyrene in the chain‐end to disturb the formation of PNIPAM aggregates, thus raising the LCST. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1117–1124, 2006     

Solid‐supported synthesis of well‐defined amphiphilic block copolymer from methacrylates

A new facile method for preparation of an amphiphilic block copolymer via a one‐pot sequential atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) on solid support was developed. As a model homopolymerization for the solid‐supported block copolymerization, ATRPs of MMA and HEMA in toluene and in 2‐butanone/1‐propanol solvent system were carried out, respectively. Crosslinked polystyrene beads bearing 2‐bromoisobutyrate moieties successfully initiated the polymerizations of MMA and HEMA in controlled manner. On the basis of the successful results, the one‐pot synthesis of amphiphilic block copolymer by changing the reaction medium was performed. After the ATRP of MMA in toluene at 90 °C for 1 h, the poly(MMA) formed on the beads were washed by continuous flow of 2‐butanone/1‐propanol under nitrogen with the aid of a glass filter in a U‐shaped glass vessel. Then, 2‐butanone/1‐propanol, copper chloride (I), 2,2′‐bipyridyl, and HEMA were added and heated at 50 °C for 48 h with shaking the vessel, followed by treatment with trifluoroacetic acid to isolate the well‐defined amphiphilic block copolymer, poly(MMA‐b‐HEMA). These demonstrated the feasibility of the present strategy for well‐defined synthesis of amphiphilic block copolymers via a one‐pot procedure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1990–1997, 2008     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006