Synthesis,crystal structure and infrared spectra of Cu(II) and Co(II) complexes with 4,4′‐dichloro‐2,2′‐[ethylene dioxybis(nitrilomethylidyne)]diphenol

Novel 4,4′‐dichloro‐2,2′‐[ethylenedioxybis(nitrilomethylidyne)]diphenol (H₂L) and its complexes [CuL] and {[CoL(THF)]₂(OAc)₂Co} have been synthesized and characterized by elemental analyses, IR, ¹H‐NMR and X‐ray crystallography. [CuL] forms a mononuclear structure which may be stabilized by the intermolecular contacts between copper atom (Cu) and oxygen atom (O3) to form a head‐to‐tail dimer. In {[CoL(THF)]₂(OAc)₂Co}, two acetates coordinate to three cobalt ions through Co? O? C? O? Co bridges and four µ‐phenoxo oxygen atoms from two [CoL(THF)] units also coordinate to cobalt ions. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Synthesis and properties of fluorinated polyimides from a new unsymmetrical diamine: 1,4‐(2′‐Trifluoromethyl‐4′,4′‐diaminodiphenoxy)benzene

A new aromatic, unsymmetrical ether diamine with a trifluoromethyl pendent group, 1,4‐(2′‐trifluoromethyl‐4′,4″‐diaminodiphenoxy)benzene, was successfully synthesized in three steps with hydroquinone as a starting material and polymerized with various aromatic tetracarboxylic acid dianhydrides, including 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, 2,2′‐bis(3,4‐dicarboxyphenyl)‐hexafluoropropane dianhydride, and pyromellitic dianhydride, via a conventional two‐step thermal or chemical imidization method to produce a series of fluorinated polyimides. The polyimides were characterized with solubility tests, viscosity measurements, IR, ¹H NMR, and ¹³C NMR spectroscopy, X‐ray diffraction studies, and thermogravimetric analysis. The polyimides had inherent viscosities of 0.56–0.77 dL/g and were easily dissolved in both polar, aprotic solvents and common, low‐boiling‐point solvents. The resulting strong and flexible polyimide films exhibited excellent thermal stability, with decomposition temperatures (at 5% weight loss) above 522 °C and glass‐transition temperatures in the range of 232–272 °C. Moreover, the polymer films showed outstanding mechanical properties, with tensile strengths of 74.5–121.7 MPa, elongations at break of 6–13%, and initial moduli of 1.46–1.95 GPa, and good dielectric properties, with low dielectric constants of 1.82–2.53 at 10 MHz. Wide‐angle X‐ray diffraction measurements revealed that these polyimides were predominantly amorphous. These outstanding combined features ensure that the polymers are desirable candidate materials for advanced microelectronic applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6836–6846, 2006     

Bis{μ‐6,6′‐dimethoxy‐2,2′‐[propane‐1,2‐diylbis(iminomethylene)]diphenolato}bis[aquacopper(II)] dihydrate

In the title compound, [Cu₂(C₁₉H₂₄N₂O₄)₂(H₂O)₂]·2H₂O, the asymmetric unit consists of one half of the bis{μ‐6,6′‐dimethoxy‐2,2′‐[propane‐1,2‐diylbis(iminomethylene)]diphenolato}bis[aquacopper(II)] complex and two water molecules. Two Cu^II centres are bridged through a pair of phenolate groups, resulting in a complex with a centrosymmetric structure, with the centre of inversion at the middle of the Cu₂O₂ plane. The Cu atoms are in a slightly distorted square‐pyramidal coordination environment (τ = 0.07). The average equatorial Cu—O bond length and the axial Cu—O bond length are 1.928 (3) and 2.486 (3) Å, respectively. The Cu—O(water) bond length is 2.865 (4) Å, so the compound could be described as having a weakly coordinating water molecule at each Cu^II ion and two solvent water molecules per dimetallic unit. The Cu...Cu distance and Cu—O—Cu angle are 3.0901 (10) Å and 87.56 (10)°, respectively. The molecules are linked into a sheet by O—H...O and C—H...O hydrogen bonds parallel to the [001] plane.     

Modified polyoxometalate: a novel monocapped bi‐supporting and reduced α‐Keggin structure {PMo12O40[Cu(2,2′‐bpy)]}[Cu(2,2′‐bpy)(en)(H2O)]2

A novel modified polyoxometalate, {PMo₁₂O₄₀[Cu(2,2′‐bpy)]}[Cu(2,2′‐bpy)(en)(H₂O)]₂ [2,2′‐bpy is 2,2′‐bipyridyl (C₁₀H₈N₂) and en is ethylenediamine (C₂H₈N₂)], has been synthesized hydrothermally and structurally characterized by elemental analysis, TG, IR, XPS and single‐crystal X‐ray diffraction. The structural analysis reveals that the compound contains the reduced Keggin polyanion [PMo₁₂O₄₀]^6? as the parent unit, which is monocapped by [Cu(2,2′‐bpy)]²⁺ fragments via four bridging O atoms on an {Mo₄O₄} pit and bi‐supported by two [Cu(2,2′‐bpy)(en)(H₂O)]²⁺ coordination cations simultaneously. There exist strong intramolecular π–π stacking between the capping and supporting units, which play a stabilizing role during the crystallization of the compound. Adjacent POM clusters are further aggregated to form a three‐dimensional supramolecular network through noncovalent forces, hydrogen bonding and π–π stacking interactions. In addition, the photocatalytic properties were investigated in detail, and the results indicated that the compound can be used as a photocatalyst towards the decomposition of the organic pollutant methylene blue (MB).     

A new route for the synthesis of phosphate esters: 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide

Podand‐type ligands are an interesting class of acyclic ligands which can form host–guest complexes with many transition metals and can undergo conformational changes. Organic phosphates are components of many biological molecules. A new route for the synthesis of phosphate esters with a retained six‐membered ring has been used to prepare 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, C₆H₄{O[cyclo‐P(O)OCH₂CMe₂CH₂O]}₂ or C₁₆H₂₄O₈P₂, (1), 2‐[(2′‐hydroxybiphenyl‐2‐yl)oxy]‐5,5‐dimethyl‐1,3,2‐dioxaphosphinane 2‐oxide, [cyclo‐P(O)OCH₂CMe₂CH₂O](2,2′‐OC₆H₄–C₆H₄OH), (2), and oxybis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, O[cyclo‐P(O)OCH₂CMe₂CH₂O]₂, (3). Compound (1) is novel, whereas the results for compounds (2) and (3) have been reported previously, but we record here our results for compound (3), which we find are more precise and accurate than those currently reported in the literature. In (1), two cyclo‐P(O)OCH₂CMe₂CH₂O groups are linked through a catechol group. The conformations about the two catechol O atoms are quite different, viz. one C—C—O—P torsion angle is −169.11 (11)° and indicates a trans arrangement, whereas the other C—C—O—P torsion angle is 92.48 (16)°, showing a gauche conformation. Both six‐membered POCCCO rings have good chair‐shape conformations. In both the trans and gauche conformations, the catechol O atoms are in the axial sites and the short P=O bonds are equatorially bound.     

Twodimensional Metal‐Organic Framework [Zn(bqdc)]n (bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylate) – Synthesis,Crystal Structure and Spectral Characterization

A new two‐dimensional metal‐organic framework [Zn(bqdc)]_n (bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylate) was obtained by the reaction of ligand 2,2′‐biquinoline‐4,4′‐dicarboxylic acid (H₂bqdc) and Zn(CH₃COO)₂·2H₂O under hydrothermal conditions. It has been characterized by elemental analysis, FT‐IR, ¹H‐NMR and single crystal X‐ray crystallography. It crystallizes in the monoclinic space group P2₁/n and exhibits a 2D zig‐zag network, assisted by face‐to‐face π‐π interactions of quinoline rings. In addition, it has a fluorescence emission in the solution state at room temperature.     

New 3,3′[2,2′‐oxy‐bis‐(oxazaborolidine)]‐ethylenes. Structural studies by NMR,X‐ray,and quantum chemistry methods

3,3′‐[2,2′‐Oxy‐bis‐(4S‐methyl, 5R‐phenyl‐1,3,2‐oxazaborolidine)]ethylene ( 4a ) and 3,3′‐[2, 2′‐oxy‐(4S‐methyl‐5R‐phenyl‐1,3,2‐oxazaborolidine)‐ (1,3,2‐benzoxazaborolidine)]ethylene ( 4b ) were synthesized by the reaction of N,N′‐bis‐[(1R,2S)‐norephedrine]oxalyl ( 3a ) or N,N′‐[((1R,2S)‐norephedrine, o‐hydroxyphenylamine]oxalyl ( 3b ) with BH₃‐THF. The molecular structure of these compounds was established by NMR and infrared spectroscopy. The molecular geometry for 4 was studied by means of theoretical methods, resulting in structures that were in total agreement with those obtained by spectroscopy data and X‐ray diffraction. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:513–519, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20151     

LC polyimides. XXXVI. Poly(ester imide)s derived from N,N′‐Bis(4‐hydroxyphenyl)biphenyl‐3,3′,4,4′‐tetracarboxylic diimide and aliphatic dicarboxylic acids

A new mesogenic monomer was prepared from biphenyl‐3,3′,4,4′‐tetracarboxylic dianhydride and 4‐aminophenol followed by the acylation of OH groups with propionic anhydride. This diphenol propionate was polycondensed by transesterification with decane‐1,10‐dicarboxylic acid, dodecane‐1,12‐dicarboxylic acid, and eicosane‐1,20‐dicarboxylic acid or with equimolar mixtures of two dicarboxylic acids. The resulting poly(ester imide)s were characterized by elemental analyses, ¹H NMR spectra, inherent viscosities, DSC measurements, optical microscopy, and X‐ray measurements with synchrotron radiation at variable temperatures. An enantiotropic smectic A phase in the molten state and a crystalline smectic E (or H) phase in the solid state were found in all cases. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3019–3027, 2000     

Syntheses and crystal structures of triorganotin (IV) derivatives with 2,2′‐bipyridine‐4,4′‐dicarboxylic acid

Four organotin complexes with 2,2′‐bipyridine‐4,4′‐dicarboxylic acid, H₂dcbp: (Ph₃n)₂(dcbp) 1 , [(PhCH₂)₃n]₂(dcbp) ⋅ 2CH₃OH 2 , [(Me₃Sn)₂(dcbp)]_n 3 , [(Bu₃Sn)₂(dcbp)]_n 4 have been synthesized. The complexes 1–4 were characterized by elemental, IR, ¹H, ¹³C, ¹¹⁹n NMR, and X‐ray crystallographic analyses. Crystal structures show that complex 1 is a monomer with one ligand coordinated to two triorganotin moieties, and a 1D infinite polymeric chain generates via intermolecular C H⋅⋅⋅N hydrogen bond; complex 2 is also a monomer and forms a 2D network by intermolecular O–H⋅⋅⋅O weak interaction; both of complexes 3 and 4 form 2D network structures where 2,2′‐bipyridine‐4,4′‐dicarboxylate acts as a tetradentate ligand coordinated to trimethyltin and tri‐n‐butyltin ions, respectively. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:19–28, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20506     

Synthesis and properties of aromatic polyimides derived from 2,2,′3,3′‐biphenyltetracarboxylic dianhydride

2,2,′3,3′‐Biphenyltetracarboxylic dianhydride (2,2,′3,3′‐BPDA) was prepared by a coupling reaction of dimethyl 3‐iodophthalate. The X‐ray single‐crystal structure determination showed that this dianhydride had a bent and noncopolanar structure, presenting a striking contrast to its isomer, 3,3,′4,4′‐BPDA. This dianhydride was reacted with aromatic diamines in a polar aprotic solvent such as N,N‐dimethylacetamide (DMAc) to form polyamic acid intermediates, which imidized chemically to polyimides with inherent viscosities of 0.34–0.55 dL/g, depending on the diamine used. The polyimides from 2,2,′3,3′‐BPDA exhibited a good solubility and were dissolved in polar aprotic solvents and polychlorocarbons. These polyimides have high glass transition temperatures above 283°C. Thermogravimetric analyses indicated that these polyimides were fairly stable up to 500°C, and the 5% weight loss temperatures were recorded in the range of 534–583°C in nitrogen atmosphere and 537–561°C in air atmosphere. All polyimides were amorphous according to X‐ray determination. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1425–1433, 1999     

A clothes‐peg‐shaped binuclear trans‐bis(2‐aminotroponato)palladium(II) complex bearing pentamethylene spacers

rac‐Bis{μ‐trans‐2,2′‐[pentane‐1,5‐diylbis(azanediyl)]ditroponato}dipalladium(II), [Pd₂(C₁₉H₂₀N₂O₂)₂], has been synthesized and fully characterized using single‐crystal X‐ray diffraction, ¹H NMR, FT–IR and mass spectroscopy. The trans coordination, vaulted structure and anti conformation have been unequivocally established from the X‐ray diffraction studies. This is the first example of a bis(aminotroponato)palladium complex. In the crystalline state, the molecule has twofold symmetry and each molecular unit undergoes intermolecular offset π‐stacking of the tropone rings to afford heterochiral interpenetrating dimers that are aligned in a lamellar manner with a herringbone packing motif.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Synthesis and Characterization of 2‐(2‐Pyridinyl)pyrazine and 2,2′‐Bipyrazine Derivatives

A convenient and high yield preparation of derivatives of 2‐(2‐pyridinyl)pyrazine and derivatives of 2,2′‐bipyrazine compounds from their derivatives of bromopyrazine using Stille coupling is reported. X‐ray structures, elemental analyses, ¹H, ¹³C‐NMR, and mass spectral data of the compounds are given.     

Regioselective synthesis of symmetrical pyridyl selenium compounds by bromine–magnesium exchange of bromopyridines using isopropyl magnesium chloride: X‐ray crystal structure of 2,2′,5,5′‐tetrabromo‐3,3′‐dipyridyldiselenide

2,2′‐Dipyridyl‐3,3′‐dipyridyl,5,5′‐dipyridyl‐diselenides have been synthesized by a convenient method employing non‐cryogenic conditions. Various bromopyridines (2‐Bromopyridine, 2,5‐dibromopyridines and 2,3,5‐Tribromopyridines) undergo selective monobromine–magnesium exchange to yield the corresponding pyridyl magnesium chlorides at room temperature upon treatment with ⁱPrMgCl. The resulting pyridyl magnesium chloride is quenched with elemental selenium, which upon further oxidation affords the above diselenides in good yields. The compounds prepared using this methodology have been characterized by elemental analysis, IR, NMR (¹H, ¹³C, ⁷⁷Se) and mass spectral analysis. The molecular structure of 2,2′,5,5′‐Tetrabromo‐3,3′‐dipyridyldiselenide has been established by single‐crystal X‐ray diffraction analysis. It exists as a dimeric form due to the non‐bonding interactions between the selenium of one pyridine moiety and the hydrogen of the other. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis,spectra, crystal structures and anticancer studies of 26‐membered macrocyclic dibutyltin(IV) dithiocarbamate complexes: Single‐source precursors for tin sulfide nanoparticles

Four new macrocyclic dinuclear dibutyltin(IV) dithiocarbamate complexes of the type [Bu₂Sn(dtc)]₂, where dtc = hexane‐1,6‐diylbis(4‐fluorobenzyldithiocarbamate) anion ( 1 ), hexane‐1,6‐diylbis(4‐chlorobenzyldithiocarbamate) anion ( 2 ), hexane‐1,6‐diylbis(furfuryldithiocarbamate) anion ( 3 ) and hexane‐1,6‐diylbis(pyrrole‐2‐ylmethyldithiocarbamate) anion ( 4 ), have been prepared. The dithiocarbamate ligands efficiently self‐assemble with Bu₂Sn(IV) to form bimetallic 26‐membered macrocycles. All the complexes have been characterized using elemental analysis, infrared and NMR (¹H and ¹³C) spectroscopies and X‐ray crystallography. Single‐crystal X‐ray diffraction analysis of all the complexes confirms the formation of the dinuclear metallomacrocycles in which dithiocarbamate ligands are asymmetrically bound to the tin atoms. The coordination sphere around the tin atom in 1 – 4 can be described as a skew trapezoidal bipyramid. The dimensions of the cavity of the macrocycles of 1 – 4 are ca 8.0 × 9.0 Å². Complexes 1 – 4 were evaluated for their in vitro anticancer activity against MCF‐7 and HL‐60 cells. Complexes 1 and 2 are more active against MCF‐7 and HL‐60. Thermal decomposition of 1 and 4 yielded tin sulfides. They were characterized using powder X‐ray diffraction (PXRD), high‐resolution transmission electron microscopy and UV diffuse reflectance and energy‐dispersive X‐ray spectroscopies. PXRD studies reveal that the as‐prepared tin sulfides are composed of orthorhombic phase of SnS.     

Effect of Metal Ions on the Structures of Coordination Polymers Based on Biphenyl‐2,2′,4,4′‐Tetracarboxylate

Two new coordination polymers, {[Cd₂(btc)(2,2′‐bpy)₂] · H₂O}_n ( 1 ) and [Zn₂(btc)(2,2′‐bpy)(H₂O)]_n ( 2 ) (H₄btc = biphenyl‐2,2′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine), were synthesized hydrothermally under similar conditions and characterized by elemental analysis, IR spectra, TGA, and single‐crystal X‐ray diffraction analysis. In complexes 1 and 2 , the (btc)^4– ligand acts as connectors to link metal ions to give a 2D bilayer network of 1 and a 3D metal‐organic framework of 2 , respectively. The differences in the structures are induced by diverging coordination modes of the (btc)^4– ligand, which can be attributed to the difference metal ions in sizes. The results indicate that metal ions have significant effects on the formation and structures of the final complexes. Additionally, the fluorescent properties of the two complexes were also studied in the solid state at room temperature.     

2,4′‐Iso­propyl­idene­diphenol

Molecules of the title compound [systematic name: 2,4′‐(propane‐2,2‐diyl)diphenol], C₁₅H₁₆O₂, are linked through intermolecular O—H·O hydrogen bonds into infinite zigzag chains. The molecular structure is compared with that of the related compound 4,4′‐iso­propyl­idene­diphenol.     

Ferrocenophanes with Interannular Nitrogen–Gallium Bridges. 1,3,2‐Diazagalla‐[3]Ferrocenophanes and an 1‐Aza‐3‐Azonia‐2‐Gallata‐[3]Ferrocenophane. Synthesis and Structure

1,1′‐Bis(trimethylsilylamino)ferrocene reacts with trimethyl‐ and triethylgallium to give the μ‐[ferrocene‐1,1′‐diyl‐bis(trimethylsilylamido)]tetraalkyldigallanes. These were converted into the 1,3‐bis(trimethylsilyl)‐2‐alkyl‐2‐pyridine‐1,3,2‐diazagalla‐[3]ferrocenophanes, of which the ethyl derivative was characterized by X‐ray structural analysis. Treatment of gallium trichloride with N,N′‐dilithio‐1,1′‐bis(trimethylsilylamino)ferrocene affords μ‐[ferrocene‐1,1′‐diyl‐bis(trimethylsilylamido)]tetrachlorodigallane along with bis(trimethylsilyl)‐2,2‐dichloro‐1‐aza‐3‐azonia‐2‐gallata‐[3]ferrocenophane as a side product, and both were structurally characterized by X‐ray analysis. The solution‐state structures of the new gallium compounds and aspects of their molecular dynamics in solution were studied by NMR spectroscopy (¹H, ¹³C, ²⁹Si NMR).     

Dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate and bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ2N,N′)copper(I) tetrafluoroborate

The single‐crystal X‐ray structures of dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate, C₁₄H₁₂N₂O₄, and the copper(I) coordination complex bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ²N,N′)copper(I) tetrafluoroborate, [Cu(C₁₄H₁₂N₂O₄)₂]BF₄, are reported. The uncoordinated ligand crystallizes across an inversion centre and adopts the anticipated anti pyridyl arrangement with coplanar pyridyl rings. In contrast, upon coordination of copper(I), the ligand adopts an arrangement of pyridyl donors facilitating chelating metal coordination and an increased inter‐pyridyl twisting within each ligand. The distortion of each ligand contrasts with comparable copper(I) complexes of unfunctionalized 2,2′‐bipyridine.