Flame‐retardant epoxy resins with high glass‐transition temperatures. II. Using a novel hexafunctional curing agent: 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐yl‐tris(4‐aminophenyl) methane

We synthesized a novel phosphorus‐containing triamine [9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐yl‐tris(4‐aminophenyl) methane (dopo‐ta)] from the nucleophilic addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide and pararosaniline chloride, using triethylamine as an acid receiver. We confirmed the structure of dopo‐ta by IR, mass, and NMR spectra and elemental analysis. dopo‐ta served as a curing agent for diglycidyl ether of bisphenol A (DGEBA) and dicyclopentadiene epoxy (hp7200). Properties such as the glass‐transition temperature (T_g), thermal decomposition temperature, flame retardancy, moisture absorption, and dielectric properties of the cured epoxy resins were evaluated. The T_g's of cured DGEBA/dopo‐ta and hp7200/dopo‐ta were 171 and 190 °C, respectively. This high T_g phenomenon is rarely seen in the literature after the introduction of a flame‐retardant element. The flame retardancy increased with the phosphorus content, and a UL‐94 V‐0 grade was achieved with a phosphorus content of 1.80 wt % for DGEBA/dopo‐ta/diamino diphenylmethane (DDM) systems and 1.46 wt % for hp7200/dopo‐ta/DDM systems. The dielectric constants for DGEBA/dopo‐ta and hp7200/dopo‐ta were 2.91 and 2.82, respectively, implying that the dopo‐ta curing systems exhibited low dielectric properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5971–5986, 2005     

Synthesis,characterization, and properties of novel epoxy resins and cyanate esters

We synthesized a novel epoxy (dopotep) and cyanate ester (dopotcy) based on a phosphorus‐containing triphenol (dopotriol). The proposed structures were confirmed by IR, mass spectra, NMR spectra, and epoxy‐equivalent‐weight titration. The synthesized dopotep or dopotcy was copolymerized with diglycidyl ether of bisphenol A (DGEBA), 6′,6‐bis(3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazineyl)methane (F‐a), or dicyanate ester of bisphenol A (BADCY). Thus, copolymers based on DGEBA/dopotep/diphenylmethane (ddm), F‐a/dopotep, BADCY/dopotcy, and DGEBA/dopotcy were developed. The thermal properties, dielectric properties, and flame retardancy of these copolymers were investigated. The curing kinetics of dopotep/ddm and dopotep/diamino diphenylsulfone were studied with differential scanning calorimetry. The microstructure of DGEBA/dopotcy was studied with IR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3487–3502, 2006     

Flame‐retardant epoxy resins with high glass‐transition temperatures from a novel trifunctional curing agent: Dopotriol

A novel phosphorus‐containing trifunctional novolac (dopotriol) was synthesized through the addition reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide and rosolic acid. The structure of dopotriol was confirmed with NMR spectroscopy and elemental analyses. The dopotriol was blended with phenol novolac in the ratios of 10/0, 8/2, 6/4, 4/6, 2/8, and 0/10 to serve as a curing agent for diglycidyl ether of bisphenol A. Thermal properties, such as the glass‐transition temperature, thermal decomposition temperature, and flame retardancy, moisture absorption, and dielectric properties of the cured epoxy resins were evaluated. The activity and activation energy of curing were studied with the methods of Kissinger and Ozawa by dynamic differential scanning calorimetry scans. The glass‐transition temperatures of the cured epoxy resins were 138–159 °C, increasing with the phosphorus content. This is rarely seen in the literature after the addition of a flame‐retardant element. The flame retardancy increased with the phosphorus content, and a UL‐94 V‐0 grade was achieved with a phosphorus content of 1.87%. Similar dielectric properties and moisture absorption were observed for these phosphorus‐containing epoxy resins, and this implied that the addition of phosphorus to epoxy did not affect the dielectric properties and moisture absorption. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2862–2873, 2005     

Studies on thermal and flame retardant behaviour of mixtures of bis(m-aminophenyl)methylphosphine oxide based benzoxazine and glycidylether or benzoxazine of Bisphenol A

The curing of mixtures of bis(m-aminophenyl)methylphosphine oxide based benzoxazine and glycidylether or benzoxazine of Bisphenol A has been studied. In all samples the molar ratio of benzoxazine monomers or the benzoxazine-epoxy system was varied to achieve different phosphorus content. The phosphorus-containing polybenzoxazines have been characterized by dynamic mechanical and thermogravimetric analysis. Limiting oxygen index values indicate good flame retardant properties.     

Development of a DOPO-containing benzoxazine and its high-performance flame retardant copolybenzoxazines

A DOPO-containing benzoxazine, which could not be prepared by the traditional approaches, was successfully prepared from phenol, aniline and DOPO by a three-step procedure. The first step is the condensation of 2-hydroxybenzaldehyde with aniline, forming an intermediate imine. The second step is the addition of DOPO to the imine resulting a secondary amine. The third step is the ring closure condensation leading to DOPO-containing benzoxazine. All these structures were confirmed by 1D and 2D NMR spectra. The curing of mixtures of DOPO-containing benzoxazine and benzoxazine of bisphenol A has been studied. In the samples the molar ratio of benzoxazine monomers was varied to achieve different phosphorus content. The phosphorus-containing polybenzoxazines have been characterized by dynamic mechanical thermal analysis and thermogravimetric analysis. Limiting oxygen index values indicates good flame retardant properties.     

Synthesis and curing of amino‐containing benzoxazine as a novel hardener for diglycidyl ether of bisphenol‐A

Benzoxazines containing various additional functional groups have been extensively reported to improve the properties of polybenzoxazines. In this work, a novel amino‐containing benzoxazine (PDETDA‐NH₂) was conveniently synthesized from diethyltoluenediamine (DETDA), 2‐hydroxybenzaldehyde, and paraformaldehyde and was used as a hardener for diglycidyl ether of bisphenol‐A (DGEBA). The curing behaviors of PDETDA‐NH₂ and PDETDA‐NH₂/DGEBA systems were studied by DSC, FT‐IR, and ¹H NMR. When curing, PDETDA‐NH₂ was firstly polymerized to N,O‐acetal‐type polymer and then rearranged to Mannich‐type polymer at elevated temperature, while the addition reaction between amino and benzoxazine was discouraged because of the steric hindrance of alkyl substituents. During PDETDA‐NH₂/DGEBA curing, it was found that the reactions happened in the order of addition polymerization of amino and epoxide, ring‐opening polymerization of benzoxazine, etherification between phenolic hydroxyl of the polymerized benzoxazine, and epoxide. Compared with DETDA cured DGEBA, PDETDA‐NH₂ cured DGEBA showed higher modulus, higher char yield, and much lower water uptake.     

Development of novel phosphorus‐containing epoxy resins from renewable resources

Novel biobased epoxy resins were prepared from two fatty acid derivatives; epoxidized 10‐undecenoyl triglyceride and epoxidized methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate, with 4,4′‐diaminodiphenylmethane as a crosslinking agent. The flame retardancy of these epoxy resins was improved by the addition of 10‐[2′, 5′‐bis(9‐oxiranyl‐nonayloxy)phenyl]‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide and by crosslinking with a phosphorus‐containing curing agent, bis(m‐aminophenyl)methylphosphine oxide. The thermal, thermomechanical, and flame‐retardant properties of the cured materials were measured with differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, and the limiting oxygen index. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6717–6727, 2006     

高性能聚苯并(噁)嗪树脂

聚苯并噁嗪树脂作为一种新型酚醛树脂,不仅具有优异的耐热性和阻燃性,而且克服了传统酚醛树脂在成形固化过程中释放小分子的缺点,在制备高性能材料方面已引起研究者的广泛关注。本文综述了近年来国内外为制备高性能化聚苯并噁嗪树脂所作的一些研究工作,包括从主链或侧链中引入苯环等刚性官能团、在主链或侧链中引入可聚合官能团、与另一种高分子形成共混或共聚物以及与其他材料复合形成复合材料等,并对该树脂材料的工业开发前景、国内外研究现状以及发展趋势进行了分析。     

Synthesis and characterization of P/Si flame retardant and its application in epoxy systems

In this report, a novel phosphorus/silicon‐containing reactive flame retardant, hexa(3‐triglycidyloxysilylpropyl)triphosphazene (HGPP), was synthesized and characterized by Fourier transform infrared spectrometry and nuclear magnetic resonance spectra (¹H, ³¹P, and ²⁹Si), respectively. To prepare cured epoxy, HGPP had been co‐cured with diglycidyl ether of bisphenol‐A (DGEBA) via 4,4‐diaminodiphenylsulfone as a curing agent. The mechanical, thermal, and flame retardant properties of the cured epoxy were evaluated by dynamic mechanical analysis, thermogravimetric analysis, and limiting oxygen index (LOI). According to these results, it could be found that incorporation of HGPP in the cured epoxy system showed good thermal stability, high LOI values, and high char yield at high temperature. As moderate loading of HGPP in the epoxy system, its storage modulus and glass transition temperature were higher than those of neat DGEBA. Copyright © 2011 John Wiley & Sons, Ltd.     

Curing studies of epoxy resins with phosphorus‐containing amines

The curing system of diglycidyl ether of bisphenol A (DGEBA) with two phosphorus‐containing amine compounds—bis(3‐aminophenyl)methyl phosphine oxide and bis(4‐aminophenyl)‐bis(9,10‐dihydro‐9‐oxa‐10‐oxide‐10‐phosphaphenanthrene‐10‐yl)methane—was studied with differential scanning calorimetry under isothermal and nonisothermal conditions and compared with the DGEBA/diamino diphenyl methane system. The isoconversional method was used to evaluate the dependence of the effective activation energy on the extent of conversion. Modulated differential scanning calorimetry and dynamic mechanical thermal analysis were used to study the phenomena of vitrification and gelation. The thermal and flame‐retardant properties were evaluated, and the limiting oxygen index values of the phosphorylated resins, above 30, confirmed that phosphorus‐containing epoxy resins are effective flame retardants. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1676–1685, 2006     

双官能度手性和消旋苯并噁嗪的合成及热性能研究

采用无溶剂法合成了新型双酚A和双酚AF(六氟双酚A)基手性和消旋苯并噁嗪单体,利用红外光谱(FTIR)、核磁共振氢谱(1H-NMR)、旋光仪和高效液相色谱(HPLC)对单体结构和性质进行了表征,通过差式扫描量热仪(DSC)和热重分析仪(TGA)对苯并噁嗪的固化行为及聚合物的热性能进行了研究.结果表明,无溶剂法合成苯并噁嗪单体具有反应速度快、产率高、对环境友好等特点;双官能度消旋苯并噁嗪单体由内消旋和外消旋异构体组成,且内消旋苯并噁嗪单体含量高于外消旋;手性和消旋苯并噁嗪单体具有相同的开环聚合行为;由于消旋苯并噁嗪分子的立体构型不同,使得聚苯并噁嗪的自由体积减小,分子链的堆积更加致密,因而消旋聚苯并噁嗪的玻璃化转变温度(Tg)和热稳定性均高于手性聚苯并噁嗪和传统的双酚A-苯胺型聚苯并噁嗪;此外,C—F键具有高的解离能,因而双酚AF基聚苯并噁嗪的热性能显著提高.     

Novel flame‐retardant thermosets: Diglycidyl ether of bisphenol A as a curing agent of boron‐containing phenolic resins

Boron‐containing novolac resins were synthesized by the modification of a commercial novolac resin with different contents of bis(benzo‐1,3,2‐dioxaborolanyl)oxide. These novolac resins were crosslinked with diglycidyl ether of bisphenol A (DGEBA), and their thermal, thermodynamomechanical, and flame‐retardant properties were evaluated. The boron‐containing novolac resins were less thermally stable than the unmodified novolac resin. Their modification degree and DGEBA content were related to the crosslinking density of the materials. The boron‐containing novolac resins generated boric acid at high temperatures and gave an intumescent char that slowed down the degradation and prevented it from being total. They also showed good flame‐retardant properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1701–1710, 2006     

The non-halogen flame retardant epoxy resin based on a novel compound with phosphaphenanthrene and cyclotriphosphazene double functional groups

A novel flame retardant additive hexa-(phosphaphenanthrene -hydroxyl-methyl-phenoxyl)-cyclotriphosphazene (HAP-DOPO) with phosphazene and phosphaphenanthrene double functional groups has been synthesized from hexa-chloro-cyclotriphosphazene, 4-hydroxy-benzaldehyde and 9,10-dihydro-9-oxa-10- phosphaphenanthrene 10-oxide(DOPO). The structure of HAP-DOPO was characterized by Fourier transformed infrared (FT-IR) spectroscopy and ¹H nuclear magnetic resonance (¹H NMR) and ³¹P nuclear magnetic resonance (³¹P NMR). The additive HAP-DOPO was blended into diglycidyl ether of bisphenol-A (DGEBA) to prepare flame retardant epoxy resins. The flame retardant properties and thermal properties of the epoxy resins cured by 4, 4′-Diamino-diphenyl sulfone (DDS) were investigated from the differential scanning calorimeter (DSC), the thermogravimetric analysis (TGA), UL94 test, the limiting oxygen index (LOI) test and Cone calorimeter. Compared to traditional DOPO-DGEBA and ODOPB-DGEBA thermosets, the HAP-DOPO/DGEBA thermosets have higher T_gs at the same UL94 V-0 flammability rating for their higher crosslinking density and have higher char yield and lower pk-HRR at same 1.2 wt.% phosphorus content which confirm that HAP-DOPO has higher flame retardant efficiency on thermosets. The scanning electron microscopy (SEM) results shows that HAP-DOPO in DGEBA/DDS system obviously accelerate formation of the sealing, stronger and phosphorus-rich char layer to improve flame retardant properties of matrix during combustion.     

Synthesis,characterization, and polymerization of brominated benzoxazine monomers and thermal stability/flame retardance of the polymers generated

Novel monofunctional brominated benzoxazine 3‐(2,4,6‐tribromophenyl)‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐bra) and bifunctional brominated benzoxazine 6,6′‐bis(3‐(2,4,6‐tribromophenyl)‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl) isopropane (B‐bra) were prepared and highly thermally stable polybenzoxazines were obtained by the thermal cure of the corresponding benzoxazines monomers. The chemical structures of these novel monomers were confirmed by FITR, ¹H‐NMR and elemental analysis. FTIR spectra and differential scanning calorimetry (DSC) suggested that the polymerization was thermally initiated and occurred via ring‐opening of the monomer in each case. Thermogravimetric analysis (TGA) indicated that brominatation could have a profound effect on increasing char yield and on thermal degradation temperatures. The results of UL‐94 burn test showed that the polybenzoxazines prepared from P‐bra and B‐bra had good flame retardance. Copyright © 2009 John Wiley & Sons, Ltd.     

Flame retardant epoxy resins based on diglycidyloxymethylphenylsilane

Silicon‐containing epoxy resins were prepared from diglycidyloxymethylphenyl silane (DGMPS) and diglycidylether of bisphenol A (DGEBA) by crosslinking with 4,4′‐diaminodiphenylmethane (DDM). Several DGMPS/DGEBA molar ratios were used to obtain materials with different silicon contents. Their thermal, dynamomechanical, and flame‐retardant properties were evaluated and related to the silicon content. The weight loss rate of the silicon‐containing resins is lower than that of the silicon free resin. Char yields under nitrogen and air atmospheres increase with the silicon content. The LOI (limited oxygen index) values increased from 24 for a standard commercial resin to 36 for silicon‐containing resins, demonstrating improved flame retardancy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5580–5587, 2006     

Fatty acid derived phosphorus‐containing polyesters via acyclic diene metathesis polymerization

The acyclic diene metathesis (ADMET) polymerization of a phosphorus‐containing α,ω‐diene prepared from a plant oil derived building block is reported. Different ruthenium based metathesis catalysts and conditions were tested to optimize the ADMET polymerization of this monomer. Undecylenyl undecenoate was used as fully renewable comonomer to obtain polyesters with different phosphorus contents and to increase the renewable content of the final polymers. Copolymerization caused marked variations in the molecular weights leading to polyesters from 6 to 38 KDa. The effect of the ADMET polymerization temperature in the thermal properties of the copolymers was studied and their thermal degradation and flame retardant properties were evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5760–5771, 2009     

Synthesis and characterization of fluid 1,3‐benzoxazine monomers and their thermally activated curing

Novel mono‐ and difunctional aliphatic oxyalcohol‐based benzoxazines have been synthesized and characterized in detail. Molecular structures of the monomers were investigated by spectral analysis. The obtained benzoxazine monomers exhibit fluidic behavior, which makes them particularly useful for many applications compared to other traditional benzoxazines. Differential scanning calorimetry was used to monitor the thermal crosslinking behavior of synthesized monomers. Mono‐ and bifunctional benzoxazine monomers exhibited low curing exhothermic peak with the onset around 173 and 180 °C, respectively. Relatively, low ring‐opening polymerization temperature was due to the hydroxyl groups present in the structure of the monomers. The hydrogen bonding of hydroxyl groups may cause alignment of the monomers in the liquid state. Thermal stabilty of the polybenzoxazines was studied by thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Thermal and physical properties of flame-retardant epoxy resins containing 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol and cured with dicyanate ester

2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an advancement reaction with the diglycidyl ether of bisphenol-A epoxy (DGEBA) resin at various stoichiometric ratios. DOPONQ-containing advanced epoxy was separately cured with various dicyanate esters to form flame-retardant epoxy/cyanate ester systems. The effect of the phosphorus content and dicyanate ester structure on the curing characteristic, glass transition temperature, dimensional stability, thermal stability, flame retardancy, and dielectric property was studied and compared with that of the control advanced bisphenol-A epoxy system. The DOPONQ-containing epoxy/cyanate ester systems exhibited higher glass transition temperatures as well as better thermal dimensional and thermal degradation stabilities. The flame retardancy of the phosphorus-containing epoxy/dicyanate ester system increased with the phosphorus content, and a UL-94 V-0 rating could be achieved with a phosphorus content as low as 2.1%.     

Preparation of phosphorus‐containing phenolic resin and its application in epoxy resin as a curing agent and flame retardant

For the sake of improving the flame retardancy of epoxy resin (EP), a novel phosphorus‐containing phenolic resin (PPR) synthesized in our group instead of conventional phenolic resin (PR) was used to cure EP in the present research. The curing processes and the corresponding crosslinking structure and mechanical performance were investigated by differential scanning calorimeter and dynamic mechanical thermal analysis. Because of the introduction of flame‐retarding elements including P and Si, PPR exhibited higher charring capacity in the condensed phase, which is helpful to construct a char layer of higher quality. Correspondingly, PPR‐cured EP displayed remarkably improved flame retardance as compared to conventional PR‐cured EP through the related evaluations including limiting oxygen index, vertical burning test, and microscale combustion colorimeter. As a multifunction agent, it is believable that PPR possesses potential commercial value to prepare flame‐retardant EP with high performance.     

Development and characterization of fully bio‐based polybenzoxazine‐silica hybrid composites for low‐k and flame‐retardant applications

In the present work, new classes of bio‐based polybenzoxazines were synthesized using eugenol as phenol source and furfurylamine and stearylamine as amine sources separately through solventless green synthetic process routes and were further reinforced with varying percentages (1, 3, 5, and 10 wt%) of silica (from rice husk) to attain hybrid composites. The molecular structure, cure behaviour, thermal stability, dielectric properties, and flame‐retardant behaviour of both benzoxazine monomers and benzoxazine composites were characterized using appropriate modern analytical techniques. The eugenol‐based benzoxazines synthesized using furfurylamine (FBz) and stearylamine (SBz) were cured at 223°C and 233°C, respectively. The differential scanning calorimetry (DSC) data reveal the glass transition temperatures (T_g) of FBz and SBz were 157°C and 132°C, respectively, and the maximum decomposition temperature (T_max) as obtained from thermogravimetric analysis (TGA), were found to be 464°C and 398°C for FBz and SBz, respectively. The dielectric constants for FBz and SBz obtained at 1 MHz were 3.28 and 3.62, respectively. Furthermore, varying weight percentages (1, 3, 5, and 10 wt%) of 3‐mercaptopropyltrimethoxysilane (3‐MPTMS) functionalized bio‐silica reinforced the composite materials as evidenced by their improved thermal stability and lower dielectric constant. Data obtained from thermal and dielectric studies suggested that these polybenzoxazines could be used in the form of adhesives, sealants, and composites for high performance inter‐layer low‐k dielectric applications in microelectronics.