Fluorinated vinyl ethers as new surface agents in the photocationic polymerization of vinyl ether resins

The syntheses of fluorinated vinyl ethers (H₂C?CHOCH₂CH₂C_nF_2n+1, n = 6 or 8) and their copolymerizations with bis(4‐vinyloxybutyl) isophthalate are reported. The fluorinated monomers were prepared by the transetherification of ethyl vinyl ether and fluorinated alcohols in a 75% yield. Added in low concentrations (0.1–3.0 wt %) to formulations containing bis(4‐vinyloxybutyl) isophthalate, they did not affect the kinetics of the cationic photopolymerization. The cured films were transparent and showed interesting properties in terms of wettability, hardness, cross‐cut adhesion, and chemical inertness. The fluoromonomers increased the hydrophobicity of the film surface, whereas the adhesion on various substrates such as glass and wood was unchanged. An increase in the methyl ethyl ketone resistance was also observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2890–2897, 2003     

Efficient photopolymerization of thick pigmented systems using upconversion nanoparticles‐assisted photochemistry

Photopolymerization of thick pigmented systems still remains challenging due to the light screening effect of the pigments. Here, we present a facile method based on upconversion nanoparticles (UCNPs)‐assisted photochemistry to achieve efficient photopolymerization and improved curing depth of pigmented systems. Under a 980‐nm laser irradiation, UCNPs are able to convert NIR light into UV and visible light to activate photoinitiators for the initiation of polymerization. Influencing factors on photopolymerization were systematically investigated. With optimal parameters, 25.5 mm of photopolymerization depth combined with 70% of maximal double bond conversion was obtained. The peak temperature of 120.4 °C during UCNPs‐assisted photopolymerization is comparable with or lower than that of some reported frontal photopolymerization applied to prepare functional composite polymeric materials. Both indentation hardness and reduced modulus of the photocured materials using UCNPs as internal lamps were higher than those of the reference cured under traditional blue LED light. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 994–1002     

High‐throughput kinetic analysis of acrylate and thiol‐ene photopolymerization using temperature and exposure time gradients

In this work, a high‐throughput technique for evaluating photopolymers is developed to enable simultaneous measurement of the effects of temperature in combination with exposure time. Temperature and exposure time gradients were produced in orthogonal directions on a single sample, and subsequently sampled using Fourier transform infrared (FTIR) spectroscopy. The technique developed here allows for photopolymerization kinetics to be analyzed rapidly over a large range of industrially relevant temperatures, giving insight into the role temperature and the polymer's glass transition temperature have in dictating the photopolymerization kinetics. In the 70/30 wt % hexyl acrylate and hexanediol diacrylate system, conversion in samples below the glass transition temperature (T_G) was 66 ± 2% after 12 s, significantly lower than the 93 ± 4% conversion at 12 s for samples polymerized at temperatures above the T_G. In addition, a thiol‐ene system was analyzed to study the effect of temperature on the ene homopolymerization in allyl ether monomers, which leads to incomplete thiol conversion in stoichiometrically balanced systems. At a 60% thiol conversion, the allyl ether‐ene conversion at all temperatures is 65 ± 3% irrespective of initial formulation temperature, indicative of the homopolymerization behavior being nearly independent of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1502–1509, 2008     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Monitoring photopolymerization reactions with optical pyrometry

This article describes the development of optical pyrometry (OP) as a new analytical technique for the continuous monitoring of the progress of both free‐radical and cationic photopolymerizations. The method is rapid, reproducible, and very easy to implement. A temperature profile of a photopolymerization can be obtained. Preliminary studies have shown that the temperatures of some polymerizing monomers can easily reach temperatures in excess of 250 °C. The effects of the mass and reactivity of the monomer, light intensity, structures, and concentrations of the photoinitiators and monomers as well as the presence or absence of oxygen on various free‐radical and cationic photopolymerizations were examined with this method. Coupling of real‐time infrared spectroscopy with OP provides a convenient method for simultaneously monitoring both the chemical conversion and the temperature of a photopolymerization. This combined technique affords new insights into the effects of temperature‐induced autoacceleration on the course of photopolymerizations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 579–596, 2003     

Solid state photopolymerization of acrylic acid at low temperature

Near‐infrared spectroscopy was used to investigate the kinetic characteristics of acrylic acid photopolymerized at ?70°C and room temperature, respectively. The obtained results showed that at ?70°C the double bond conversion increased with increase in the initiator's concentration. Addition of soft chain component polyethylene glycol 400 (PEG400) could lead to high conversion in the solid state, and then high final double bond conversion after post‐curing. The introduction of water at low temperature also contributed largely to the enhancement in the initial and final double bond conversion in solid state. SEM photographs showed that more pores came up in the cured films with the increase in the water content in the reaction system. The change in the photoinitiator concentration, amount of PEG400, and content of water had significant effect on samples cured at lower temperature than at room temperature under the same conditions. Different kinds of photoinitiators showed different contributions to the initial and final double bond conversion on photopolymerization of acrylic acid at low temperature. Significant post‐curing phenomena for photopolymerization of acrylic acid at low temperature could be observed as well. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel organosoluble and colorless poly(ether imide)s based on 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A novel series of colorless and highly organosoluble poly(ether imide)s were prepared from 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride with various fluorinated aromatic bis(ether amine)s via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by cyclodehydration to produce the polymer films. The poly(ether imide)s showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents, in ether‐type solvents, and even in chlorinated solvents. Their films had a cutoff wavelength between 358 and 373 nm, and the yellowness index ranged from 3.1 to 9.5. The glass‐transition temperatures of the poly(ether imide) series were recorded between 237 and 297 °C, the decomposition temperatures at 10% weight loss were all above 494 °C, and the residue was more than 54% at 800 °C in nitrogen. These films showed high tensile strength and also were characterized by higher solubility, lighter color, and lower dielectric constants and moisture absorption than an analogous nonfluorinated polyimide series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3140–3152, 2006     

Fluorinated hydroxytelechelic polybutadiene as additive in cationic photopolymerization of an epoxy resin

Fluorinated hydroxytelechelic polybutadiene (PBF), which is synthesized from the radical addition of a fluorinated mercaptan onto a hydroxytelechelic polybutadiene was used as an efficient surface and mechanical modifier in original formulations to enable the UV cationic polymerization of a telechelic diepoxy cycloaliphatic oligomer, leading to crosslinked polymers. Various amounts of PBF were used (ranging between 0 and 15 wt %). The kinetics of photocrosslinking revealed that the diepoxyde conversion reached 70% only in the absence of PBF, whereas it was about 90% in the presence of 10 wt % of PBF. When the PBF content increased, the dynamic mechanical measurements showed that: (i) the glass transition temperature values decreased and (ii) the resilience increased. The hydrophobicity of these polymers was investigated from the water contact angle (WCA) values showing a surface modification of the epoxy‐based system. Indeed, great modifications were noted on the extreme surface (i.e., air side) of the polymers (with WCA values as high as 120°) in contrast to those observed on the substrate side. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2835–2842, 2009     

Cationic addition polymerization of 1,4‐dioxene using gacl3 as lewis acid catalyst: Long‐lived species‐mediated polymerization

Effective cationic addition polymerization of 1,4‐dioxene, a six‐membered cyclic olefin with two oxygen atoms adjacent to the double bond, was performed using a simple metal halide catalyst system in dichloromethane. The polymerization was controlled when the reaction was conducted using GaCl₃ in conjunction with an isobutyl vinyl ether–HCl adduct as a cationogen at –78°C to give polymers with predetermined molecular weights and relatively narrow molecular weight distributions. The long‐lived properties of the propagating species were further confirmed by a monomer addition experiment and the analyses of the product polymers by ¹H NMR and MALDI–TOF–MS. Although highly clean propagation proceeded, the apparent rate constant changed during the controlled cationic polymerization of 1,4‐dioxene. The reason for the change was discussed based on polymerization results under various conditions. The obtained poly(1,4‐dioxene) exhibited a very high glass transition temperature (T_g) of 217°C and unique solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Synergistic effects in hybrid free radical/cationic photopolymerizations

Multifunctional alkyl glycidyl ether and oxetane monomers are usually deemed to be poorly reactive and are consequently of limited use for high speed photocuring applications. However, these monomers can be made to undergo exceedingly rapid exothermic photopolymerization when combined with a multifunctional acrylate monomer and a corresponding free radical photoinitiator. Under optimum UV irradiation conditions, these hybrid photopolymerizations take place rapidly and substantially without an induction period. A mechanism was proposed on the basis of thermal acceleration of the cationic ring‐opening polymerizations induced by the fast exothermic free radical acrylate photopolymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3759–3769, 2007     

Combination of transition metal carbonyls and silanes: New photoinitiating systems

The recently developed silyl radical chemistry is used in combination with transition metal carbonyls MC (dimanganese(0) decacarbonyl; dirhenium decacarbonyl; cyclopentadienyl iron(II) dicarbonyl dimer) for both free radical promoted cationic photopolymerization (FRPCP) and free radical photopolymerization (FRP). The newly developed photoinitiating systems (MC/silane and MC/silane/iodonium salt) are highly efficient under air. Photopolymerization profiles obtained upon a visible light irradiation delivered by a xenon lamp show that high conversion can be easily achieved after a 400 s exposure. Sunlight irradiations under air can also lead to tack free coatings. The processes associated with the metal carbonyl radical/silane interactions are investigated by Laser Flash Photolysis (LFP) and ESR‐Spin Trapping (ESR‐ST) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1830–1837, 2010     

A humidity blocker approach to overcoming the humidity interference with cationic photopolymerization

A humidity blocker approach to overcoming the humidity interference with cationic photopolymerization is proposed and validated. Environmental humidity is one of the major interfering factors in cationic photopolymerization, and cationic photopolymerization is found to be inhibited by high humidity. When curing cycloaliphatic epoxide based cationic UV curable materials flexibilized by various reactive diluents under different humidity conditions, it was found that the more hydrophobic materials exhibited higher monomer conversion under higher humidity. To obtain cationic UV curable materials that are less influenced by humidity, a humidity blocker approach was proposed and monomer conversion of materials containing both hydroxy‐functional reactive diluents and epoxy‐siloxane were examined using real‐time FTIR. The hydroxy‐functional reactive diluents act as an internal hydroxyl source that enhances monomer conversion through chain transfer mechanism, and the hydrophobic epoxy‐siloxane acts as a humidity blocker, mitigating the inhibiting effects of humidity. Cationic UV curable materials with an optimized combination of these two components exhibited higher and more consistent monomer conversion under a range humidity conditions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4344–4351, 2008     

UV‐curable bismaleimides containing poly(dimethylsiloxane): Use as hydrophobic agent

The synthesis and characterization of poly(dimethylsiloxanes) bearing maleimides end‐groups (PDMSM) were carried out through imidization of maleic anhydride with three poly(dimethylsiloxanes) diamines of different molecular weights. Self‐photopolymerization of PDMSM was studied by Real‐Time Fourier Transform infrared spectroscopy (RT‐FTIR) and was possible even without photoinitiator (Darocur 1173). The reaction was found to proceed within seconds upon exposure to ultraviolet (UV) radiation to generate highly crosslinked polymer networks. The results indicated that these polymerizations were less sensitive to oxygen inhibition than the radical processes carried out on conventional UV‐curable acrylate resins. The thermal and mechanical properties of these resulting materials were studied starting from PDMS precursors with different molecular weights. These materials exhibit a low glass transition temperature (相似文献   

The influence of N‐vinyl pyrrolidone on polymerization kinetics and thermo‐mechanical properties of crosslinked acrylate polymers

Polymerization of multifunctional acrylate monomers generates crosslinked polymers that are noted for their mechanical strength, thermal stability, and chemical resistance. A common reactive diluent to photopolymerizable formulations is N‐vinyl pyrrolidone (NVP), which is known to reduce the inhibition of free radical photopolymerization by atmospheric oxygen. In this work, the copolymerization behavior of NVP was examined in acrylate monomers with two to five functional groups. At concentrations as low as 2 wt %, NVP increases the polymerization rate in copolymerization with multifunctional acrylate monomer. The relative rate enhancement associated with adding NVP increases dramatically as the number of acrylate double bonds changes from two to five. The influence of NVP on polymerization kinetics is related to synergistic cross‐propagation between NVP and acrylate monomer, which becomes increasingly favorable with diffusion limitations. This synergy extends bimolecular termination into higher double bond conversion through reaction diffusion controlled termination. Copolymerizing concentrations of 5–30 DB% NVP with diacrylate or pentaacrylate monomer also increases Young's modulus and the glass transition temperature (T_g) in comparison to neat acrylate polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4062–4073, 2007     

Effect of photoinitiator on photopolymerization of inorganic–organic hybrid polymers (ORMOCER®)

Inorganic–organic hybrid polymers have been developed and tested for evaluation in optical and electrical applications. Although hybrid inorganic–organic polymers can be synthesized by sol–gel chemistry at first, the physical properties of hybrid inorganic–organic polymers are changed during thin film-making processes, that is, photocuring and thermal curing. To investigate the effect of photoinitiator on the material properties during processing, a model system containing methacrylic groups as organically polymerizable units was selected. The conversion of CC double bond of methacrylic groups depending on some kinds of photoinitiator quantities was characterized by Fourier transform infrared spectroscopy. It was confirmed to correlate the degree of CC double bond conversion with the refractive indices. Thermodynamically, the enthalpy of the photopolymerization of hybrid polymer was investigated by UV–DSC. UV–DSC spectra showed the exothermic nature of photopolymerization of ORMOCER® to be in dependence of photoinitiator quantities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1979–1986, 2004     

A bicyclic conjugated diene monomer,tetrahydroindene, for cationic polymerization and a novel alicyclic hydrocarbon polymer with heat resistance

This study was directed toward the cationic polymerization of tetrahydroindene (i.e., bicyclo[4.3.0]‐2,9‐nonadiene), a bicyclic conjugated diene monomer, with a series of Lewis acids, especially focusing on the synthesis of high‐molecular‐weight polymers and subsequent hydrogenation for novel cycloolefin polymers with high service temperatures. EtAlCl₂ or SnCl₄ induced an efficient and quantitative cationic polymerization of tetrahydroindene to afford polymers with relatively high molecular weights (number‐average molecular weight > 20,000) and 1,4‐enchainment bicyclic main‐chain structures. The subsequent hydrogenation of the obtained poly(tetrahydroindene) with p‐toluenesulfonyl hydrazide resulted in a saturated alicyclic hydrocarbon polymer with a relatively high glass transition (glass‐transition temperature = 220 °C) and improved pyrolysis temperature (10% weight loss at 480 °C). The new diene monomer was randomly copolymerized with cyclopentadiene at various feed ratios in the presence of EtAlCl₂ to give novel cycloolefin copolymers, which were subsequently hydrogenated into alicyclic copolymers with variable glass‐transition temperatures (70–220 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6214–6225, 2006     

Living cationic polymerization of dihydrofuran and its derivatives

Cationic polymerization of 2,3‐dihydrofuran (DHF) and its derivatives was examined using base‐stabilized initiating systems with various Lewis acids. Living cationic polymerization of DHF was achieved using Et_1.5AlCl_1.5 in toluene in the presence of THF at 0 °C, whereas it has been reported that only less controlled reactions occurred at 0 °C. Monomer‐addition experiments of DHF and the block copolymerization with isobutyl vinyl ether demonstrated the livingness of the DHF polymerization: the number–average molecular weight of the polymers shifted higher with low polydispersity as the polymerization proceeded after the monomer addition. Furthermore, this base‐stabilized cationic polymerization system allowed living polymerization of ethyl 1‐propenyl ether and 4,5‐dihydro‐2‐methylfuran at ?30 and ?78 °C, respectively. In the polymerization of 2,3‐benzofuran, the long‐lived growing species were produced at ?78 °C. The obtained polymers have higher glass transition temperatures compared to poly(acyclic alkyl vinyl ether)s. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4495–4504, 2008     

Full control of polymer properties during the two‐stage on‐demand free‐radical photopolymerization of fiber‐reinforced polymers

The effect of a two‐step free‐radical photopolymerization of an acrylate resin on the polymer properties in the presence of glass fibers is studied. It is found that a first irradiation leading to a partial conversion is effective for the fabrication of a preimpregnated glass‐fiber composite, which can be further processed and fully polymerized through a second irradiation. DMA analysis evidences the formation of a first relatively soft polymer embedding unreacted double bonds during the preirradiation. Further process allows the completion of the photopolymerization together with a reinforcement of the polymer network. This obviously affects the final mechanical properties of the photocomposite. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1440–1447     

Crosslinking of a polyacrylate bearing a spiroorthoester pendant group with mixtures of diglycidyl ether of bisphenol A and phosphorus‐containing glycidyl derivatives

The cationic crosslinking of a polyacrylate bearing a spiroorthoester pendant group with mixtures of diglycidyl ether of bisphenol A and three phosphorus‐containing glycidyl derivatives was carried out with ytterbium triflate as an initiator. The curing process was monitored with Fourier transform infrared spectroscopy. The thermomechanical and thermogravimetric properties were evaluated. The glass transition temperatures of the obtained materials were, in general, above 100 °C. The incorporation of phosphorus into the network increased the limiting oxygen index values, thus improving the flame retardancy of the materials. During crosslinking, all the crosslinked polymers showed slight shrinkage that was much lower than that observed in conventional epoxy resins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1920–1930, 2007