Nanostructural properties of zinc oxide thin films grown on non‐planar substrates

The crystallographic structure of zinc oxide thin films grown on optical fibres using single source chemical vapour deposition (SSCVD) was analysed using near edge X‐ray absorption fine structure (NEXAFS). Zinc diethyl carbamate was used as a precursor for the growth of highly conformal films in a one‐step deposition process without substrate rotation and at substrate temperatures of 400–575 °C. It was found that the growth temperatures greatly affected the crystallographic structure of the film with no preferred crystallographic orientation and negligible crystallinity at low temperatures and very high crystallinity with pure c‐axis orientation at high temperatures. Cross‐sectional analysis of the films by scanning electron microscopy (SEM) showed the presence of a film at all points around the fibre. These films generally consisted of densely packed columns that bore a strong resemblance to c‐axis‐oriented films grown on planar substrates. Copyright © 2005 John Wiley & Sons, Ltd.     

钴岛膜上对巯基苯甲酸的表面增强红外吸收光谱

通过置换反应在金属铝表面制备了表面没有任何保护剂且具有红外增强作用的钴岛膜,用SEM、XRD和表面增强红外光谱对其形貌和性质进行表征。 结果表明,铝片上沉积出的钴呈岛状结构,钴岛膜由二次钴粒子和一次钴粒子通过密堆积的方式构成;首次发现具有这种特殊结构的钴对吸附于其表面的有机分子的红外吸收光谱有较大的增强作用,用此钴岛膜对1 mmol/L的对巯基苯甲酸的红外光谱研究时得到很好的红外增强信号,使得表面增强红外光谱可以用于痕量分析、检测。     

Evolution of the local structure in GaN:O thin films grown by ion‐assisted deposition with film thickness

Optical and optoelectronic properties of gallium nitride strongly depend on the synthesis procedure, which may be related to specific structural characteristics of GaN inherent to each preparation condition. Amorphous and nanocrystalline GaN films have been prepared by ion‐assisted deposition (IAD). The films prepared at 10^?5 Torr for <50 min have shown exploitable optoelectronic properties, in spite of the high concentration of oxygen of these films (up to 25 at.%). We study here the evolution of the local structure around Ga atoms as the deposition time increases. Five IAD GaN films of thickness ranging between 140 and 450 nm on silicon substrates were analysed by x‐ray absorption fine structure (XAFS) at the Ga K‐edge. The first and second shells of neighbouring atoms are clearly identified in the radial distribution functions at approximately 1.9 and 3.2 Å, respectively. In all of the films, Ga seems to be tetrahedrally coordinated to four nitrogen atoms, some of which may be substituted by oxygen. For deposition times <50 min, analysis of both x‐ray adsorption near‐edge structure (XANES) and extended x‐ray adsorption fine structure (EXAFS) regions indicates that the material is highly amorphous. Above this threshold, a peak corresponding to the first coordination sphere of Ga atoms becomes discernible and increases in intensity for longer deposition times, indicating that the second shell of atoms is now more ordered. The pseudo Debye–Waller factor of the Ga shell is used for monitoring the average degree of amorphization in an ～100 nm thick top layer, which seems to be related to the film oxygen content. The XAFS results are compatible with a layered distribution of crystallinity, as has been suggested previously for these films. Copyright © 2005 John Wiley & Sons, Ltd.     

Ag@AgI/Ni薄膜的制备及其模拟太阳光催化性能

采用电化学方法制备Ag@AgI/Ni表面等离子体薄膜催化剂,使用扫描电镜（SEM）,X射线衍射（XRD）和紫外-可见漫反射光谱（UV-Vis DRS）对薄膜的表面形貌、晶体结构、光谱特性以及能带结构进行分析表征,在模拟太阳光照射下,把罗丹明B作为模拟污染物对薄膜的光催化活性与稳定性进行评价,采用向反应体系中加入活性物种捕获剂的方法对薄膜光催化机理进行探究。结果表明：最佳工艺下制备的Ag@AgI/Ni薄膜表面是由附着少量Ag粒子的AgI纳米晶构成。薄膜具有显著的表面等离子共振作用、优异的光催化活性和突出的光催化稳定性。光催化反应60 min,薄膜对罗丹明B的降解率（81.1%）是AgI/Ni薄膜的1.35倍,是TiO₂（P25）/ITO薄膜的1.61倍。在薄膜光催化活性基本保持不变的前提下可循环使用5次。薄膜表面纳米Ag的等离子共振对光阴极反应的活化是光催化性能提高的重要原因。提出了薄膜光催化降解罗丹明B的反应机理。     

Ag@AgI/Ni薄膜的制备及其模拟太阳光催化性能

采用电化学方法制备Ag@AgI/Ni表面等离子体薄膜催化剂,使用扫描电镜(SEM),X射线衍射(XRD)和紫外-可见漫反射光谱(UV-Vis DRS)对薄膜的表面形貌、晶体结构、光谱特性以及能带结构进行分析表征,在模拟太阳光照射下,把罗丹明B作为模拟污染物对薄膜的光催化活性与稳定性进行评价,采用向反应体系中加入活性物种捕获剂的方法对薄膜光催化机理进行探究。结果表明:最佳工艺下制备的Ag@AgI/Ni薄膜表面是由附着少量Ag粒子的AgI纳米晶构成。薄膜具有显著的表面等离子共振作用、优异的光催化活性和突出的光催化稳定性。光催化反应60 min,薄膜对罗丹明B的降解率(81.1%)是AgI/Ni薄膜的1.35倍,是TiO_2(P25)/ITO薄膜的1.61倍。在薄膜光催化活性基本保持不变的前提下可循环使用5次。薄膜表面纳米Ag的等离子共振对光阴极反应的活化是光催化性能提高的重要原因。提出了薄膜光催化降解罗丹明B的反应机理。     

Advances in Synchrotron Radiation‐based X‐ray Absorption Spectroscopy to Characterize the Fine Atomic Structure of Single‐atom Nanozymes

Single‐atom nanozymes (SAzymes) with high atomic utilization, excellent catalytic activities, and selectivity have recently attracted significant interest. Usually, they contain only isolated metal atoms embedded in host matrices. However, traditional measuring instruments are extremely difficult to obtain their useful structural information due to ultra‐low metal loading, amorphous structure, coordination with light‐weight surface atoms and/or co‐existing of other metal elements. Synchrotron radiation‐based X‐ray absorption fine structure spectroscopy (XAFS) has demonstrated its usefulness for this type of catalyst. In this mini‐review, we have summarized the recent progress using XAFS to characterize the fine atomic structure of these nanozymes. The synthetic strategies of SAzymes, the principle of XAFS, delicate structural information by XAFS, and the applications of SAzymes have been presented. Furthermore, the outlook and challenges in this active research field have also been discussed. We expect that the help of XAFS can offer a wealth of opportunities to design and develop more efficient SAzymes and apply them to various fields.     

Morphology and Performance of Poly(2-methoxy-5-(20-ethyl-hexyloxy)-p-phenylenevinylene) (MEH-PPV)∶(6,6)-Phenyl-C61-butyric Acid Methyl Ester (PCBM) Based Polymer Solar Cells

Polymer solar cells were fabricated based on composite films of poly(2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylenevinylene) (MEH‐PPV):fullerene derivative (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) with weight blend ratio of 1:3, 1:4 and 1:5, spin‐coated from chloroform (CF), chlorobenzene (CB), and o‐dichlorobenzene (ODCB) solutions, respectively. Photoinduced current and power conversion efficiency (PCE) of the devices show a dependence on the solvents. The solar cells have the highest PCE at 1:5 blend ratio. Transmission electron microscopy (TEM) morphology reveals that there are some voids in MEH‐PPV:PCBM films. The void number decreases with the solvent from CF to CB and ODCB. We found the voids are located at the bottom of the films through electron tomography technique by TEM and film bottom‐side morphology study by atomic force microscopy. The charge carrier transport efficiency and collection efficiency should decrease greatly due to the voids, and the more voids the film has, the more degree the efficiencies decrease. PCE of the solar cell prepared from CF is lower than that of the solar cells prepared from CB and ODCB. The void phenomenon of MEH‐PPV:PCBM based solar cell and method to investigate the void position provide an experimental evidence and research mentality to fabricate polymer solar cell with high performance.     

Electrical Properties of Ag Thin Films Deposited by the Improved SILAR Method

Ag films were deposited on glass substrates using the successive layer adsorption and reaction (SILAR) method and characterized with XRD and AFM. The I‐V curves of the thicker Ag films obeyed ohmic law because of the formation of the continuous films. After annealing at 300°C in N₂, the conductance increased due to the removal of imperfections. Compared with the thicker film, the thinner Ag films showed nonlinear I‐V curves. After annealing, these films were inconductible. This may be ascribed to the destruction of the junction, that existed between the Ag islands. The absorption spectra of the films proved the formation of the Ag islands after annealing. With the thickness of the films further decreasing, the Ag films became insulated.     

Composite thin films of poly(phenylene oxide)/poly(styrene) and PPO/silver via vapor phase deposition

We report fabrication of thin (100～300 nm) poly(phenylene oxide) (PPO) films and their composites with poly (styrene) (PS) and silver (Ag) nanoparticles using a one‐step electron beam‐assisted vapor phase co‐deposition technique. Surface morphology and the structure of the deposited polymer thin film composites were characterized by FTIR, Raman, X‐ray spectroscopy, and contact angle measurements. As‐deposited PPO films and PPO/Ag composites were of porous nature and contrary to solvent casting techniques were free from nodular growth. In the case of PPO/PS thin film polymer composites, however, film morphology displayed nodular growth of PPO with nodule diameters of about ～200 nm and height of approximately 50 nm. Unique morphological changes on the porous PPO thin film surface were noticed at different Ag filling ratios. Further, the capacitance of PPO/Ag composites (<16 wt%) were measured under radio‐frequency conditions and they were functional up to 100 MHz with an average capacitance density of about 2 nF/cm². The fabricated PPO‐based composite systems are discussed for their potential applications including embedded capacitor technology. Copyright © 2008 John Wiley & Sons, Ltd.     

Ag nanoparticles deposited onto silica,titania, and zirconia mesoporous films synthesized by sol–gel template method

A variety of Ag nanoparticles/oxide mesoporous films with templated silica, titania, and zirconia was synthesized by sol–gel method at glass, aluminum, and silicon substrates using metal alkoxides (tetraethoxysilane, titanium tetraisopropoxide, and zirconium tetrapropoxide) and AgNO₃ as precursors of oxide films and Ag nanoparticles, respectively, and Pluronic P123 as a template agent. Oxide films alone and Ag/oxide composites were characterized using hexane adsorption, X-ray diffraction (XRD), Raman and ultraviolet (UV)/vis spectroscopies, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The distribution of Ag nanoparticles within the films, their sizes, intensity, and position of surface plasmon resonance (SPR) absorbance band at λ = 400 nm, as well as the textural and structural characteristics of whole films depend on treatment temperature, types of substrates and oxide matrices, oxide crystallization, and Ag content. Ag nanoparticles form preferably on the outer surface of the films under lower sintering temperatures if the amount of loaded silver is low. Oxide crystallization (e.g., TiO₂) promotes silver embedding into the outer film layer. At higher silver content (≥10 at.%) and higher calcination temperature (873 K), silver nanoparticles could be entrapped more uniformly along the film profile because of more intensive evaporation of silver droplets from the outer surface of the films on heating.     

Characteristic properties of film prepared from poly(L‐lactide)‐grafted dextran of a relatively high sugar unit content as a degradable biomaterial

To develop novel biomedical soft materials with degradability, amphiphilic poly(L ‐lactide)‐grafted dextrans (Dex‐g‐PLLAs) of relatively high sugar unit contents were synthesized with the trimethylsilyl protection method. The characteristic properties of solution‐cast films prepared from the obtained Dex‐g‐PLLAs were investigated. The water absorption and degradation rate of the Dex‐g‐PLLA films increased with increasing sugar unit content. The morphology of the bulk phase and top surface of the Dex‐g‐PLLA films was evaluated with transmission electron microscopy and atomic force microscopy, respectively. The bulk phase of the Dex‐g‐PLLA films with a sugar unit content of 16–25 wt % was found by transmission electron microscopy to form a lamellar type of phase‐separated structure composed of approximately 80–100‐nm‐wide nanodomains because of their amphiphilic and branched structures. The hydrophobic top surface for a Dex‐g‐PLLA film with a sugar unit content of 25 wt % covered with PLLA segments was confirmed by atomic force microscopy phase images to be easily converted to a wettable top surface covered with hydrophilic dextran aggregates showing an 8–10‐nm‐wide honeycomb pattern by means of annealing in water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6402–6409, 2006     

Geometric Model Describing the Banded Morphology of Particle Films Formed by Convective Assembly

Nanoparticle films coated on smooth substrates by convective assembly from dilute suspensions in dip‐coating configuration are known to have discrete film morphologies. Specifically, the film morphology is characterized by alternating bands of densely packed particles and bands of bare substrate. Convective assembly is a frontal film‐growth process that occurs at the three‐phase contact line formed by the substrate, the suspension in which it is submersed, and the surrounding air. The bands are parallel to this contact line and can be either monolayered or multilayered. Monolayered bands result whenever the substrate is withdrawn from the suspension at a rate too high for particles to assemble into a continuous film. We report a new insight to the mechanism behind this banding phenomenon, namely, that inter‐band spacing is strongly influenced by the constituent particle size. We therefore propose a geometric model relating the inter‐band spacing to the particle size. By making banded films with systematically varied particle sizes (silica/zeolite, 20 to 500 nm), we are able to quantitatively validate our model. Furthermore, the model correctly predicts that multilayered banded films have higher inter‐band spacings than monolayered banded films comprising the same particles.     

Dynamics of Photoelectrons and Structural Changes of Tungsten Trioxide Observed by Femtosecond Transient XAFS

The dynamics of the local electronic and geometric structures of WO₃ following photoexcitation were studied by femtosecond time‐resolved X‐ray absorption fine structure (XAFS) spectroscopy using an X‐ray free electron laser (XFEL). We found that the electronic state was the first to change followed by the local structure, which was affected within 200 ps of photoexcitation.     

Ag-PVA和Ag-PVA/TiO2复合超薄膜的制备及性能研究

用3种方法制备了银纳米粒子-聚乙烯醇复合体系,其中用加热还原法所得体系中Ag纳米粒子的尺寸较大(15nm),其表面等离子体共振吸收峰较宽,最大吸收波长位于420nm;用室温硼氢化钠还原法得到的复合体系的吸收峰蓝移至409nm,且峰形较窄,Ag纳米粒子的平均粒径为8.7nm;低温NaBH4还原法所得体系吸收峰进一步蓝移至397nm,此时Ag纳米粒子粒径最小(3.5nm).将室温还原法所得Ag-PVA复合体系旋涂成膜,所得薄膜光滑、透明、均匀性好,该法适用于制备多层薄膜,以调控薄膜的厚度和光谱性质.将Ag-PVA复合体系与钛酸四丁酯(Ti(O_nBu)₄)的乙醇溶液交替旋涂得到Ag-PVA/TiO₂有机/无机复合薄膜.紫外-可见吸收光谱研究表明,随着Ag-PVA层数的增加,薄膜的表面等离子体共振吸收强度呈线性增加,但是TiO₂层数的增加对吸收光谱没有明显影响.Ag-PVA/TiO₂有机/无机复合薄膜将金属纳米粒子、有机高分子与无机半导体材料结合在一起,这种多层纳米结构在光电、催化功能薄膜等方面具有潜在的应用前景.     

烷氧基取代金属酞菁固态薄膜光谱及结构的研究

本文选用一种烷氧基取代的金属酞菁化合物,溶解旋涂于玻璃基板上,分别经有机溶剂处理和加热处理,发现都可以使吸收光谱范围向长波方向拓宽。X-射线衍射研究表明:经上述方法处理后都可使染料分子的聚集程度发生变化,堆砌方式由微晶型向晶型结构转变,高分辩率扫描电镜观察进一步证实了上述结果。     

Red to Blue High Electrochromic Contrast and Rapid Switching Poly(3,4‐ethylenedioxypyrrole)–Au/Ag Nanocomposite Devices for Smart Windows

Poly(3,4‐ethylenedioxypyrrole) (PEDOP)–Ag and PEDOP–Au nanocomposite films have been synthesized for the first time by electropolymerization of the conducting‐polymer precursor in a waterproof ionic liquid, 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, followed by Ag/Au nanoparticle incorporation. That the Ag/Au nanoparticles are not adventitious entities in the film is confirmed by a) X‐ray photoelectron spectroscopy, which provides evidence of Ag/Au–PEDOP interactions through chemical shifts of the Ag/Au core levels and new signals due to Ag–N(H) and Au–N(H) components, and b) electron microscopy, which reveals Au nanoparticles with a face‐centered‐cubic crystalline structure associated with the amorphous polymer. Spectroelectrochemistry of electrochromic devices based on PEDOP–Au show a large coloring efficiency (η_max=270 cm² C^?1, λ=458 nm) in the visible region, for an orange/red to blue reversible transition, followed by a second, remarkably high η_max of 490 cm² C^?1 (λ=1000 nm) in the near‐infrared region as compared to the much lower values achieved for the neat PEDOP analogue. Electrochemical impedance spectroscopy studies reveal that the metal nanoparticles lower charge‐transfer resistance and facilitate ion intercalation–deintercalation, which manifests in enhanced performance characteristics. In addition, significantly faster color–bleach kinetics (five times of that of neat PEDOP!) and a larger electrochemical ion insertion capacity unambiguously demonstrate the potential such conducting‐polymer nanocomposites have for smart window applications.     

Gold surface plasmon crystal structure based‐on polystyrene template for biosensor application

In this communication, we assembled ordered polystyrene (PS) microsphere array as a template with the drop‐coating method, and the oxygen plasma was used to etch the template to adjust the spacing between the PS microspheres. Nano‐triangular gold array and silver nano‐pyramid array were obtained by ion beam sputtering to deposit precious metal gold and silver. We observed the surface morphology of Au and Au/Ag composite films by scanning electron microscope and characterized the films by X‐ray diffraction and ultraviolet/visible light spectrophotometer. The results show that the etching time of oxygen plasma has an obvious effect in adjusting the spacing between PSs and has a significant effect on the morphology of Au structure.     

Designed fabrication of ordered porous au/ag nanostructured films for surface-enhanced Raman scattering substrates

This article reports the designed preparation of two different kinds of novel porous metal nanostructured films, namely, an ordered macroporous Au/Ag nanostructured film and an ordered hollow Au/Ag nanostructured film. Different from previous reports, the presently proposed method can be conveniently used to control film structures by simply varying the experimental conditions. The morphology of these films has been characterized by scanning electron microscopy (SEM), and their performance as surface-enhanced Raman scattering (SERS) substrates has been evaluated by using rhodamine 6G (R6G) as a probe molecule. We show that such porous nanostructured films consisting of larger interconnected aggregates are highly desirable as SERS substrates in terms of high Raman intensity enhancement, excellent stability, and reproducibility. The interconnected nanostructured aggregate, long-range ordering porosity, and nanoscale roughness are important factors responsible for this large SERS enhancement ability.     

X-ray absorption spectroscopy study of the electronic structure and local coordination of 1st row transition metal-promoted Chevrel-phase sulfides

Abstract

The electronic structures of S and Mo as well as the local coordination of Mo are investigated as a function of metal promotion Chevrel-phase (CP) sulfides. We observe the effect of metal promoter-induced electron donation into the stoichiometric range M_xMo₆S₈ (M?=?Fe, Ni, Cu; x?=?0–2) through analysis of X-ray absorption near-edge structure regions. We further observe the effect of this promotion on the bonding environment of Mo₆ metal centers through extended X-ray absorption fine structure analysis. We monitor expansion and contraction of Mo₆ octahedra with and without metal promotion, as has been predicted by Hückel molecular orbital theory. We further observe a marked tunability in the electronic structure of sulfur upon charge transfer between promoting species and Mo₆S₈ units. Average Mo₆ octahedron Mo–Mo bond contraction from 2.76 Å to as short as 2.69 Å was observed upon incorporation of metal promoters, while intercluster separation displays a pronounced increase for promoter-host lattices compared to un-promoted Mo₆S₈. To corroborate spectroscopically observed phenomena, we performed computational analyses of spin-polarized densities of state for the CP materials investigated herein, where a detectable increase in sulfur-based frontier orbital population is observed in accordance with experimentally validated orbital filling.     

Kinetics of Spontaneous Bimetallization between Silver and Noble Metal Nanoparticles

A physical mixture of polymer‐protected Ag nanoparticles and Rh, Pd, or Pt nanoparticles spontaneously forms Ag‐core bimetallic nanoparticles. The formed nanoparticles were smaller than the parent Ag nanoparticles. In the initial process of this reaction, the surface plasmon absorption of Ag nanoparticles diminished and then almost ceased within one hour. Within several minutes, the decrease in Ag surface plasmon absorption could be analyzed by second‐order reaction. This reaction was accelerated with an increase of temperature and the energy gap in the Fermi level between Ag and the other metals. The activation energy (E_a) of this reaction could be determined. An electron transfer reaction from Ag to other metal nanoparticles was proposed as the initial interaction between these metal nanoparticles because the Fermi level of Ag is relatively high, and the electron transfer is possible in terms of energy. The Marcus plot between the rate constant and the driving force, roughly estimated from the work function of metals, and the observed E_a values reasonably explained the proposed electron transfer mechanism.