Synthesis and chiroptical properties of L‐valine‐containing poly(phenylacetylene)s with (a)chiral pendant terminal groups

Poly(phenylacetylene)s containing L ‐valine residues (P 1 ) with (a)chiral pendant terminal groups R^(*) [?(HC?C{C₆H₄CONHCH[CH(CH₃)₂]COO? R^(*)})_n?]; R^(*) = 1‐octyl (P 1 o), (1S,2R,5S)‐(+)‐menthyl [P 1 (+)], (1R,2S,5R)‐(?)‐menthyl [P 1 (?)] are designed and synthesized. The polymers are prepared by organorhodium catalysts in high yields (yield up to 88%) with high molecular weights (M_w up to ?6.4 × 10⁵). Their structures and properties are characterized by NMR, IR, TGA, UV, and circular dichroism analyses. All the polymers are thermally fairly stable (T_d ≥ 320 °C). The chiral moieties induce the poly(phenylacetylene) chains to helically rotate in a preferred direction. The chirality of the pendant terminal groups affects little the helicity of the polymers but their bulkiness stabilizes the helical conformation against solvent perturbation. The backbone conjugation and chain helicity of the polymers can be modulated continuously and reversibly by acid. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2117–2129, 2006     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

Deep insights into the hydrolysis of N,N‐dialkylaminoethyl methacrylates in aqueous solution with 1H NMR spectroscopy

N,N‐dialkylaminoethyl methacrylate (DAEA) monomers are extensively used to prepare multi‐responsive polymers. However, these monomers face high risk of hydrolysis in their ester groups when being polymerized in water‐containing medias. Here, NMR spectroscopy was employed to continuously track the hydrolysis and solubility of four widely used DAEA monomers [CH₂CH₂R₁COO(CH₂)₂N(R₂)₂; R₁ = H or CH₃; R₂ = CH₃, CH₂CH₃ or CH(CH₃)₂] under typical polymerization conditions. With this technique, the hydrolysis reactivity and absolute hydrolysis amount of these monomers are separately examined, and then their kinetic correlations with solubility, molecular structure, pH, and temperature are established, so that the hydrolysis of DAEA monomers and even other esters with similar cyclic structure can be predicted. The present efforts are expected to provide a general understanding for the hydrolysis of all the DAEA monomers, benefitting to the optimization of polymerization toward well‐defined DAEA copolymers, as well as the design of smart soft matter for specific applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 914–923     

A hybrid‐type,chiral π‐conjugated polymer wrapped with polyhedral oligomeric silsesquioxanes

A novel hybrid‐type chiral binaphthyl‐based polyarylene derivative with polyhedral oligomeric silsesquioxanes (POSS) units 2a was prepared by Suzuki–Miyaura coupling polymerization from a chiral (R)‐6,6′‐dibromo‐2,2′‐diPOSS‐substituted 1,1′‐binaphthyl derivative 1a and p‐biphenylene diboronic acid. As a reference, a binaphthyl‐based polyarylene derivative without POSS unit 2b was also prepared. The obtained polymers were studied with thermogravimetric analysis, optical rotations, circular dichroism (CD), ultraviolet‐visible, and photoluminescence (PL) spectra. Gel permeation chromatography measurements of 2a and 2b showed that their number‐average molecular weights were 13,300 and 16,500, respectively. The thermal stability of POSS‐modified polymer 2a (temperature of 10% weight loss; T₁₀ = 380 °C) was extremely high compared with that of polymer without POSS unit 2b (T₁₀ = 335 °C) due to the siliceous bulky POSS segments on the side chains. The specific optical rotation [α]_D was ?66.7° (c 0.06, CHCl₃) for 2a and ?62.3° (c 0.06, CHCl₃) for 2b . The CD spectra showed that these two polymers had very similar and strong Cotton effects. Film polymer 2a showed almost the same PL spectrum as that in dilute CHCl₃ solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the π‐conjugated polymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6035–6040, 2008     

Asymmetric anionic polymerization of N‐1‐naphthylmaleimide with chiral ligand‐organometal complexes in toluene

Asymmetric anionic homopolymerizations of N‐1‐naphthylmaleimide (1‐NMI) were performed with chiral ligand/organometal complexes to form optically active polymers. Poly(1‐NMI)s obtained with methylene‐bridged bisoxazoline derivatives (Rbox)‐diethylzinc (Et₂Zn) complexes showed high specific optical rotations ([α]) from +152.3 to +191.4°. Circular dichroism spectra of the polymers exhibited a split Cotton effect in the UV absorption‐band region. According to the exciton chirality method, the absolute configuration of the polymer main chain was determined according to the following method: (+)‐poly[N‐substituted maleimides (RMI)] main chains can contain more (S,S)‐ than (R,R)‐configurations. (?)‐Poly(RMI) main chains can contain more (R,R)‐ than (S,S)‐configurations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3556–3565, 2001     

Organoaluminum‐mediated polymerization of diazoketones

Polymerization of diazoketones mediated by organoaluminum compounds was investigated. Trialkylaluminum R₃Al (R = iBu, Et, Me) and diisobutylaluminum hydride (DIBAL) polymerized (E)‐1‐diazo‐3‐nonen‐2‐one ( 1 ) to give polymers with M_n = 2000–3500, which contained nearly 33 mol % of azo group (? N?N? ) along with the dominant acylmethylene unit in the main chain. On the other hand, when (E)‐1‐diazo‐4‐phenyl‐3‐buten‐2‐one ( 2 ) was used as a monomer for the organoaluminum‐mediated polymerization, the resulting polymers had ethylidene (? CH[CH₃]? ) units in the main chain along with acylmethylene and azo group, as a result of reductive cleavage of the acyl group during the polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5209–5214, 2007     

Synthesis and helicity of optically active poly(N‐propargylphosphonamidates) having chiral phosphorus center

Novel chiral N‐propargylphosphonamidate monomers (HC?CCH₂NHP(?O)R? O? menthyl, 1 : R = CH₃, 2 : R = C₂H₅, 3 : R = n‐C₃H₇, 4 : R = Ph) were synthesized by the reaction of the corresponding phosphonic dichlorides with menthol and propargylamine. Pairs of diastereomeric monomers 1 – 4 with different ratios were obtained due to the chiral P‐center and menthyl group. One diastereomer could be separated from another one in the cases of monomers 1 and 2 . Polymerization of 1 – 4 with (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in CHCl₃ gave the polymers with number‐average molecular weights ranging from 5000 to 12,000 in 65–85%. Poly( 1 )–poly( 4 ) exhibited quantitative cis contents, and much larger specific rotations than 1 – 4 did in CHCl₃. The polymers showed an intense Cotton effect around 325 nm based on the conjugated polyacetylene backbone. It was indicated that the polymers took a helical structure with predominantly one‐handed screw sense, and intramolecular hydrogen bonding between P?O and N? H of the polymers contributed to the stability of the helical structure. Poly( 1a ) and poly( 2a ) decreased the CD intensity upon raising CH₃OH content in CHCl₃/CH₃OH. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1515–1524, 2007     

Metallkomplexe mit biologisch wichtigen Liganden. CLVII [1] Halbsandwich‐Komplexe mit Isocyanoacetylaminosäureestern und Isocyanoacetyldi‐ und tripeptidestern („Isocyano‐Peptide”︁)

Metal Complexes of Biologically Important Ligands, CLVII [1] Halfsandwich Complexes of Isocyanoacetylamino acid esters and of Isocyanoacetyldi‐ and tripeptide esters (?Isocyanopeptides”?) N‐Isocyanoacetyl‐amino acid esters CNCH₂C(O) NHCH(R)CO₂CH₃ (R = CH₃, CH(CH₃)₂, CH₂CH(CH₃)₂, CH₂C₆H₅) and N‐isocyanoacetyl‐di‐ and tripeptide esters CNCH₂C(O)NHCH(R¹)C(O)NHCH(R²)CO₂C₂H₅ and CNCH₂C(O)NHCH(R¹)C(O)NHCH (R²)C(O)NHCH(R³)CO₂CH₃ (R¹ = R² = R³ = CH₂C₆H₅, R² = H, CH₂C₆H₅) are available by condensation of potassium isocyanoacetate with amino acid esters or peptide esters. These isocyanides form with chloro‐bridged complexes [(arene)M(Cl)(μ‐Cl)]₂ (arene = Cp*, p‐cymene, M = Ir, Rh, Ru) in the presence of Ag[BF₄] or Ag[CF₃SO₃] the cationic halfsandwich complexes [(arene)M(isocyanide)₃]⁺X^? (X = BF₄, CF₃SO₃).     

Diversification of ortho‐Fused Cycloocta‐2,5‐dien‐1‐one Cores and Eight‐ to Six‐Ring Conversion by σ Bond C−C Cleavage

Sequential treatment of 2‐C₆H₄Br(CHO) with LiC≡CR¹ (R¹=SiMe₃, tBu), nBuLi, CuBr?SMe₂ and HC≡CCHClR² [R²=Ph, 4‐CF₃Ph, 3‐CNPh, 4‐(MeO₂C)Ph] at ?50 °C leads to formation of an intermediate carbanion (Z)‐1,2‐C₆H₄{C_A(=O)C≡C_BR¹}{CH=CH(CH^?)R²} ( 4 ). Low temperatures (?50 °C) favour attack at C_B leading to kinetic formation of 6,8‐bicycles containing non‐classical C‐carbanion enolates ( 5 ). Higher temperatures (?10 °C to ambient) and electron‐deficient R² favour retro σ‐bond C?C cleavage regenerating 4 , which subsequently closes on C_A providing 6,6‐bicyclic alkoxides ( 6 ). Computational modelling (CBS‐QB3) indicated that both pathways are viable and of similar energies. Reaction of 6 with H⁺ gave 1,2‐dihydronaphthalen‐1‐ols, or under dehydrating conditions, 2‐aryl‐1‐alkynylnaphthlenes. Enolates 5 react in situ with: H₂O, D₂O, I₂, allylbromide, S₂Me₂, CO₂ and lead to the expected C ‐E derivatives (E=H, D, I, allyl, SMe, CO₂H) in 49–64 % yield directly from intermediate 5 . The parents (E=H; R¹=SiMe₃, tBu; R²=Ph) are versatile starting materials for NaBH₄ and Grignard C=O additions, desilylation (when R¹=SiMe) and oxime formation. The latter allows formation of 6,9‐bicyclics via Beckmann rearrangement. The 6,8‐ring iodides are suitable Suzuki precursors for Pd‐catalysed C?C coupling (81–87 %), whereas the carboxylic acids readily form amides under T3P® conditions (71–95 %).     

Synthesis and properties of azobenzene‐containing poly(1‐alkyne)s with different functional pendant groups

1‐Alkynes containing azobenzene mesogenic moieties [HC?C(CH₂)₉? O? ph? N?N? ph? O? R; R = ethyl ( 1 ), octyl ( 2 ), decyl ( 3 ), (S)‐2‐methylbutyl ( 4 ), or (S)‐1‐ethoxy‐1‐oxopropan‐2‐yl ( 5 ); ph = 1,4‐phenyl] were synthesized and polymerized in the presence of a Rh catalyst {(nbd)Rh⁺[B(C₆H5)₄]^?; nbd = 2,5‐norbornadiene} to yield a series of liquid‐crystalline polymers in high yields (e.g., >75%). These polymers had moderate molecular weights (number‐average molecular weight ≥ 12,000), high cis contents in the main chain (up to 83%), good thermal stability, and good solubility in common organic solvents, such as tetrahydrofuran, chloroform, and dichloromethane. These polymers were thoroughly characterized by a combination of infrared, nuclear magnetic resonance, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy, and two‐dimensional wide‐angle X‐ray diffraction techniques. The liquid‐crystalline behavior of these polymers was dependent on the tail group attached to the azobenzene structure. Poly‐ 1 , which had the shortest tail group, that is, an ethyl group, showed a smectic A mesophase, whereas poly‐ 2 , poly‐ 3 , and poly‐ 5 , which had longer or chiral tail groups, formed smectic C mesophases, and poly‐ 4 , which had another chiral group attached to the azobenzene structure, showed a chiral smectic C mesophase in both the heating and cooling processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4532–4545, 2006     

From the Lithium‐2‐anilide‐2‐fluoro‐1,3‐diaza‐2‐sila‐cyclopentene‐GaCl3 Adduct to 1,4,6‐Triaza‐5‐gallium‐7‐sila‐cyclo‐3‐heptene ‐ Experimental and Quantum‐chemical Results

The lithium salt (HC–NCMe₃)₂SiFNLiR ( 1 ) R = C₆H₃(2,6‐CHMe₂)₂ reacts with trichlorogallium under displacement of the lithium ion by GaCl₃ to give the adduct [(HC–NCMe₃)₂SiFN]^– [(GaCl₃)R·Li(thf)₄]⁺ ( 1 ). Compound 1 thermally loses LiCl and forms the bicyclic ring intermediates V and VI . Compound  VI adds the aniline H₂NC₆H₃(2,6‐CHMe₂)₂ and the unsaturated, seven‐membered ring compound –NCMe₃–CH₂–CH=NCMe₃GaCl₂–NR–SiFNHR– ( 2 ) is obtained. The addition is accompanied by an enamine‐imine‐tautomerism and proves the Lewis acid character of the silicon atom in an unknown 3‐center‐2‐electron interaction of one nitrogen atom with the silicon and gallium atoms. Quantum chemical calculations of the thermal isomerisation process and crystal structures of 1 and 2 are reported.     

Synthesis of dendronized,chiral conjugated polymers with appendant Fréchet‐type dendrons

New chiral binaphthyl‐based polyarylenes [(S)‐ 3a and (S)‐ 3b ] with appendant Fréchet‐type poly(aryl ether) dendrons (first generation and second generation) were synthesized with Suzuki polycondensation from chiral (S)‐6,6′‐dibromo‐2,2′‐didendron‐substituted 1,1′‐binaphthyl derivatives and p‐phenylene diboronic acid. The polymers were studied with circular dichroism, fluorescence, and ultraviolet–visible spectra. Laser light scattering measurements of (S)‐ 3a and (S)‐ 3b showed that their weight‐average molecular weights were 2.39 × 10⁵ and 1.09 × 10⁴, respectively. The specific optical rotation [α]_D was ?59.6 for (S)‐ 3a and ?62.7 for (S)‐ 3b . These dendronized conjugated polymers exhibited good thermal stability. The glass‐transition temperatures and the initial decomposition temperatures were 187.5 and 265.3 °C for (S)‐ 3a and 173.8 and 308.9 °C for (S)‐ 3b , respectively. (S)‐ 3a and (S)‐ 3b had high fluorescence quantum efficiencies, 87 and 91%, respectively, in tetrahydrofuran. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1167–1172, 2002     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Novel chiral PEDOTs for selective recognition of 3,4‐dihydroxyphenylalanine enantiomers: Synthesis and characterization

Two new 3,4‐ethylenedioxythiophene (EDOT) derivatives, (2R)‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl 2‐phenylpropanoate ((R)‐EDTM‐PP) and (2S)‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl 2‐phenylpropanoate ((S)‐EDTM‐PP), were synthesized and electropolymerized in dichloromethane (CH₂Cl₂) and terabutylammonium hexafluorophosphate (Bu₄NPF₆) system. As chiral electrodes, poly((2R)‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl 2‐phenylpropanoate) ((R)‐PEDTM‐PP) and poly((2S)‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl 2‐phenylpropanoate) ((S)‐PEDTM‐PP)‐modified glassy carbon electrodes (GCEs) were employed to successfully recognize 3,4‐dihydroxyphenylalanine (DOPA) enantiomers. Cyclic voltammetry presents that (R)‐PEDTM‐PP and (S)‐PEDTM‐PP had good redox activity and stability. Spectroelectrochemistry studies revealed (R)‐PEDTM‐PP and (S)‐PEDTM‐PP polymers have electronic bandgap of 1.68 and 1.66 eV, and could be reversibly oxidized and reduced accompanying with obvious color changes from dark blue to light purple. In addition, the electrochemical behavior, structural characterization, thermal stability, morphology and circular dichroism of (R)‐PEDTM‐PP and (S)‐PEDTM‐PP films were investigated in detail. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2238–2251     

Molecular Switching: A Fully Reversible,Optically Active Photochemical Switch Based on a Tetraethynylethene‐1,1′‐Binaphthalene Hybrid System

The synthesis, characterization, and physical properties of a novel, fully reversible, light‐driven molecular switch, (R,R)‐ 1 /(R,R)‐ 2 , based on a tetraethynylethene‐1,1′‐binaphthalene hybrid system are presented. trans‐Configured (R,R)‐ 1 was synthesized in 57% yield by Stille cross‐coupling between stannylated tetraethynylethene 3 and 3‐iodo‐1,1′‐binaphthalene derivative (R)‐ 4 (cf. Scheme 2). The cis‐isomer (R,R)‐ 2 was prepared from (R,R)‐ 1 by photoisomerization. X‐Ray crystal‐structure analyses were obtained for both cis‐ and trans‐forms of the photoswitch (Figs. 1 and 2). In the crystalline state, molecules of the cis‐isomer (R,R)‐ 2 exhibit intramolecular edge‐to‐face (C−H⋅⋅⋅π) interactions between naphthalene rings of the two 1,1‐binaphthalene moieties (Fig. 3). The switching properties were investigated by electronic absorption spectroscopy (Table and Fig. 4): irradiation at λ=398 nm converts trans‐isomer (R,R)‐ 1 into cis‐isomer (R,R)‐ 2 , whereas switching occurs in the opposite direction upon irradiation at λ=323 nm. No thermal interconversion between the two isomers was observed in CH₂Cl₂ at room temperature over a period of 2 – 3 months, and the system possesses good resistance against photofatigue (Fig. 5). Investigations of the circular dichroism of (R,R)‐ 1 and (R,R)‐ 2 in CH₂Cl₂ solution showed that the chiral binaphthalene moieties induce a weak Cotton effect in the achiral tetraethynylethene core (Fig. 6). System (R,R)‐ 1 /(R,R)‐ 2 represents one of the rare switches allowing two‐way photochemical interconversions, not perturbed by thermal‐isomerization pathways.     

Stereochemistry of the Methyl Group in (R)‐3‐Methylitaconate Derived by Rearrangement of 2‐Methylideneglutarate Catalysed by a Coenzyme B12‐Dependent Mutase

2‐Methylideneglutarate mutase is an adenosylcobalamin (coenzyme B₁₂)‐dependent enzyme that catalyses the equilibration of 2‐methylideneglutarate with (R)‐3‐methylitaconate. This reaction is believed to occur via protein‐bound free radicals derived from substrate and product. The stereochemistry of the formation of the methyl group of 3‐methylitaconate has been probed using a `chiral methyl group'. The methyl group in 3‐([²H₁,³H]methyl)itaconate derived from either (R)‐ or (S)‐2‐methylidene[3‐²H₁,3‐³H₁]glutarate was a 50 : 50 mixture of (R)‐ and (S)‐forms. It is concluded that the barrier to rotation about the C−C bond between the methylene radical centre and adjacent C‐atom in the product‐related radical [^.CH₂CH(⁻O₂CC=CH₂)CO₂⁻] is relatively low, and that the interaction of the radical with cob(II)alamin is minimal. Hence, cob(II)alamin is a spectator of the molecular rearrangement of the substrate radical to product radical.     

Enantiomeric high‐performance liquid chromatography resolution and absolute configuration of 6β‐benzoyloxy‐3α‐tropanol

The absolute configuration of the naturally occurring isomers of 6β‐benzoyloxy‐3α‐tropanol ( 1 ) has been established by the combined use of chiral high‐performance liquid chromatography with electronic circular dichroism detection and optical rotation detection. For this purpose (±)‐ 1 , prepared in two steps from racemic 6‐hydroxytropinone ( 4 ), was subjected to chiral high‐performance liquid chromatography with electronic circular dichroism and optical rotation detection allowing the online measurement of both chiroptical properties for each enantiomer, which in turn were compared with the corresponding values obtained from density functional theory calculations. In an independent approach, preparative high‐performance liquid chromatography separation using an automatic fraction collector, yielded an enantiopure sample of _OR(+)‐ 1 whose vibrational circular dichroism spectrum allowed its absolute configuration assignment when the bands in the 1100–950 cm^‐1 region were compared with those of the enantiomers of esters derived from 3α,6β‐tropanediol. In addition, an enantiomerically enriched sample of 4 , instead of _OR(±)‐ 4 , was used for the same transformation sequence, whose high‐performance liquid chromatography follow‐up allowed their spectroscopic correlation. All evidences lead to the _OR(+)‐(1S,3R,5S,6R) and _OR(?)‐(1R,3S,5R,6S) absolute configurations, from where it follows that samples of 1 isolated from Knightia strobilina and Erythroxylum zambesiacum have the _OR(+)‐(1S,3R,5S,6R) absolute configuration, while the sample obtained from E. rotundifolium has the _OR(?)‐(1R,3S,5R,6S) absolute configuration.     

Synthesis,light emission,and photovoltaic properties of perylene‐containing polyacetylenes

Perylene (Py)‐containing polyacetylenes with different skeleton structures ? [HC?C(C₆H₄)CO₂? Py]_n? (P 1 ), ? [HC?C(CH₂)₈CO₂? Py]_n? (P 2 ), and ? {[(C₆H₅) C?C(CH₂)₉NH₂]? co? [(C₆H₅)C?C(CH₂)₉? Py]}_n? (P 3 ) are synthesized in satisfactory yields by Rh‐catalyzed polymerization (for P 1 and P 2 ) and polymer reaction (for P 3 ). All the polymers are soluble and possess high molecular weights (M_w up to 2.8 × 10⁵). Their structures and properties are characterized and evaluated by IR, NMR, UV, TGA, PL, and photovoltaic (PV) analyses. The polymers are thermally stable, losing little of their weights when heated to 330 °C. When their solutions are irradiated, their perylene pendants emit intense red fluorescence at 610 nm. PV cells with a configuration of ITO/PEDOT:PSS/polymer/LiF/Al are fabricated, which show maximum current density of 10.3 μA/cm². The external quantum efficiency is sensitive to the polymer structure, with P 3 exhibiting the highest value of 0.23%. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2025–2037, 2008