Densely grafting copolymers of ethyl cellulose through atom transfer radical polymerization

Densely grafting copolymers of ethyl cellulose with polystyrene and poly(methyl methacrylate) were synthesized through atom transfer radical polymerization (ATRP). First, the residual hydroxyl groups on the ethyl cellulose reacted with 2‐bromoisobutyrylbromide to yield 2‐bromoisobutyryloxy groups, known to be an efficient initiator for ATRP. Subsequently, the functional ethyl cellulose was used as a macroinitiator in the ATRP of methyl methacrylate and styrene in toluene in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst system. The molecular weight of the graft copolymers increased without any trace of the macroinitiator, and the polydispersity was narrow. The molecular weight of the side chains increased with the monomer conversion. A kinetic study indicated that the polymerization was first‐order. The morphology of the densely grafted copolymer in solution was characterized through laser light scattering. The individual densely grafted copolymer molecules were observed through atomic force microscopy, which confirmed the synthesis of the densely grafted copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4099–4108, 2005     

Block copolymers based on 2‐vinyl‐4,4‐dimethyl‐5‐oxazolone by RAFT polymerization: Experimental and computational studies

The ability of 2‐vinyl‐4,4‐dimethyl‐5‐oxazolone (VDM), a highly reactive functional monomer, to produce block copolymers by reversible addition fragmentation chain transfer (RAFT) sequential polymerization with methyl acrylate (MA), styrene (S), and methyl methacrylate (MMA) was investigated using cumyl dithiobenzoate (CDB) and 2‐cyanoisopropyl dithiobenzoate (CPDB) as chain transfer agents. The results show that PS‐b‐PVDM and PMA‐b‐PVDM well‐defined block copolymers can be prepared either by polymerization of VDM from PS‐ and PMA‐macroCTAs, respectively, or polymerization of S and MA from a PVDM‐macroCTA. In contrast, PMMA‐b‐PVDM block copolymers with controlled molecular weight and low polydispersity can only be obtained by using PMMA as the macroCTA. Ab initio calculations confirm the experimental studies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Graft copolymers of polyethylene by atom transfer radical polymerization

Poly(ethylene‐g‐styrene) and poly(ethylene‐g‐methyl methacrylate) graft copolymers were prepared by atom transfer radical polymerization (ATRP). Commercially available poly(ethylene‐co‐glycidyl methacrylate) was converted into ATRP macroinitiators by reaction with chloroacetic acid and 2‐bromoisobutyric acid, respectively, and the pendant‐functionalized polyolefins were used to initiate the ATRP of styrene and methyl methacrylate. In both cases, incorporation of the vinyl monomer into the graft copolymer increased with extent of the reaction. The controlled growth of the side chains was proved in the case of poly(ethylene‐g‐styrene) by the linear increase of molecular weight with conversion and low polydispersity (M_w /M_n < 1.4) of the cleaved polystyrene grafts. Both macroinitiators and graft copolymers were characterized by ¹H NMR and differential scanning calorimetry. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2440–2448, 2000     

Atom transfer radical polymerization of methyl methacrylate via reversibly supported catalysts on silica gel via self‐assembly

A reversible catalyst immobilization system via self‐assembly of hydrogen bonding between thymine anchored on silica gel support and 2,6‐diaminopyridine functionalized with a catalyst (copper bromide‐N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) complex) was developed for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). At elevated temperatures, the hydrogen bonding disassociated and released the catalyst as free small molecules for catalysis, which effectively mediated a living polymerization of MMA, producing PMMA with controlled molecular weight and narrow molecular weight distribution (<1.3). At room temperature, the catalyst assembled on the silica gel support by hydrogen bonding, and thus could be recovered and reused for a second run of ATRP. The recovered catalyst still mediated a living polymerization of MMA with reduced activity (54–64%), but had much improved control of the polymerization. The resulting PMMA had molecular weights very close to theoretical vales. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 22–30, 2004     

Tuning the parameters of the suspension polymerization of styrene,divinylbenzene, and N‐(p‐vinylbenzyl)‐ 4,4‐dimethylazlactone

Azlactone‐functionalized microporous polystyrene resins were synthesized by suspension polymerization of styrene, divinylbenzene and N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone (VBM). A fractional factorial design of experiments (DOE) has been used to evaluate the influence of several parameters (factors) on the physical and chemical properties (responses) of the resins. Six factors were considered: (i) the organic/aqueous phase ratio, (ii) the amount of the functional monomer N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone, (iii) the amount of stabilizer, (iv) the amount of initiator, (v) the stirring speed, and (vi) the equilibration time. The process responses were the yield of polymerization, the diameter of the beads and their polydispersity, their swelling ratio in dichloromethane and the accessibility ratio of the immobilized azlactone sites. This methodology enables the determination of an optimal combination of the six factors to synthesize beads in high yield (92%) with remarkable properties for SPOS applications (azlactone sites loading = 1.57 mmol/g, swelling ratio in dichloromethane = 5.0 mL/g and 100% accessibility ratio). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3677–3686, 2007     

ATRP of methyl methacrylate using a novel binol ester‐based bifunctional initiator

Novel bifunctional initiators [1,1′‐Bi‐2‐naphthol bis(2‐bromo‐2‐methylpropionate); (R)‐, (S)‐, and racemic‐] were synthesized from the esterification of 1,1′‐bi‐2‐naphthol and used as initiators in atom transfer radical polymerization (ATRP) in conjunction with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA), and copper (I) bromide or copper (I) chloride. The initiators synthesized were completely characterized by UV, FTIR, NMR, and Mass spectroscopies. A detailed investigation of the ATRP of methyl methacrylate (MMA) with the bifunctional initiators (BBiBN) along with CuBr or CuCl/PMDETA catalyst system in anisole was carried out at 30 °C. Thus, MMA polymerization is shown to proceed with first‐order kinetics, with predicted molecular weight, and narrow polydispersity indices. The ATRP of glycidyl methacrylate (GMA) and tert‐butyl acrylate (tBA) were also performed with BBiBN initiator in conjunction with CuBr/PMDETA catalyst system. The polymerization of GMA was carried out at 30 °C, but tBA was polymerized at 60 °C. Gel permeation chromatography (GPC), FTIR, NMR, UV spectroscopies, and TGA were used for the characterization of the polymers synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 902–915, 2004     

Prodendronic polyamines from stable or labile methacrylates obtained by selective Michael addition onto asymmetric diacrylic compounds

A new synthetic strategy for the preparation of methacrylic monomers and polymers carrying acyl β‐amino groups is presented. The approach is based on the Michael addition of aliphatic amines onto asymmetric acrylic/methacrylic compounds, reacting the amine highly selectively with the acrylic unit while leaving the methacrylic moiety unreacted. The corresponding polymers are then obtained by conventional radical polymerization. The use of N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) as the secondary amine leads to TEDETA moieties supported on polymeric chains. The new aminopolymers are sensitive to pH and to temperature exhibiting a lower critical solution temperature of between 50 and 90 °C. A further interesting feature of the new approach is that the stability toward hydrolysis of the side β‐amino acyl compounds was found to be dependent on whether an acrylamide or an acrylate is employed as the acrylic group of the asymmetric starting material. The esters exhibit an enhanced sensitivity to hydrolysis, compared to standard aliphatic esters, and decompose releasing a derivative of the amine precursor, within hours or weeks, depending on the pH and temperature conditions. The use of the amides leads to stable polymers when the same experimental conditions are applied. The novel dendronic polyamines have been proven to interact with DNA and to transfect cells with efficiency close to that obtained with polyethyleneimine vectors used as positive controls. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2297–2305     

Atom Transfer Radical Polymerization of Styrene with 5‐Chloromethyl‐2‐hydroxy‐benzaldehyde as Initiator

Abstract

Atom transfer radical polymerization (ATRP) of styrene (St) proceeded using 5‐chloromethyl‐2‐hydroxy‐benzaldehyde as initiator, CuCl as catalyst, and N,N,N′,N′,N′‐pentamethyldiethyltriamine (PMDETA) as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (M _n/M _w ranges from 1.25 to 1.50). The end structure of PSt was analyzed by ¹H‐NMR, and PSt initiated MMA to form block copolymer (PSt‐b‐PMMA), which also proved that the polymerization could be controlled. The effects of reaction temperature and monomer to initiator mole ratio on the polymerization displayed living character were discussed.     

Kinetic study of in situ normal and AGET atom transfer radical copolymerization of n–butyl acrylate and styrene: Effect of nanoclay loading and catalyst concentration

The effect of clay nanolayers and catalyst concentration on the kinetics of atom transfer radical copolymerization of styrene and butyl acrylate initiated by activators generated by electron transfer (AGET initiation system) or an alkyl halide (normal initiation system) was studied. Monomer conversion was studied by attenuated total reflection–Fourier transform infrared spectroscopy, and also proton nuclear magnetic resonance (¹H NMR) spectroscopy was utilized to evaluate the heterogeneity in the composition of poly(styrene‐co‐butyl acrylate) chains. A decrease in the copolymerization rate of styrene and butyl acrylate in the presence of clay platelets was observed since clay layers confine the accessibility of monomer and growing radical chains. Considering the linear first‐order kinetics of the polymerization, successful AGET and normal atom transfer radical polymerization (ATRP) in the presence of clay nanolayers were carried out. Consequently, poly(styrene‐co‐butyl acrylate) chains with narrow molecular weight distribution and low polydispersity indices (1.13–1.15) were obtained. The linearity of ln([M]₀/[M]) versus time and molecular weight distribution against conversion plots indicates that the proportion of propagating radicals is almost constant during the polymerization, which is the result of insignificant contribution of termination and transfer reactions. Controlled synthesis of poly(styrene‐co‐butyl acrylate)/clay is implemented with the diminishing catalyst concentration of copper(I) bromide/N,N,N′,N′′,N′′‐pentamethyl diethylene triamine without affecting the copolymerization rate of normal ATRP. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 789–799, 2012     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Regio‐selective peroxybromination of poly(vinyl methyl ketone) as versatile tool for generation active ATRP initiation sites on solid surfaces

Peroxybromination or so‐called radical bromination is an environmentally friendly process which involves the use of in situ generated bromine by action of hydrogen peroxide on sodium or ammonium bromide in acid medium. The reaction takes place at room temperature without eliminating hydrobromic acid and no needs the use of elemental bromine. The reaction with poly(vinyl methyl ketone) in biphasic system was demonstrated to result in quantitative bromination exclusively at the methyne carbon of the polymer. The brominated polymer was successfully used as multifunctional macroinitiator for atom transfer radical polymerization (ATRP) of styrene and MMA to give bottlebrush polymers, as evidenced by ¹H NMR and GPC. This strategy was demonstrated to provide a means of easy bromination of solid polystyrene microspheres (210–420 μm) constituting with vinyl methyl ketone copolymer segments. Bromoalkyl groups generated (1.3 mmol g^?1) in aqueous mixture were used for surface initiated ATRP of glycidyl methacrylate and styrene monomers to give dense graft chains tethered to the surfaces with hydrolysis‐proof linkages. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3892–3900     

Well-defined azlactone-functionalized (co)polymers on a solid support: synthesis via supported living radical polymerization and application as nucleophile scavengers

Wang resin has been converted to a supported initiator for transition metal-mediated living radical polymerization often called atom-transfer radical polymerization (ATRP) of 2-vinyl-4,4-dimethyl-5-oxazolone (VDM) and styrene (S). Several "Rasta" resins with well-defined macromolecular architectures, including homopolymers PVDM, PS, statistical P(S-stat-VDM), block P(S-b-VDM), and P[S-b-(S-stat-VDM)] copolymers, have been elaborated. For the homopolymerization of VDM and S, a sacrificial initiator, benzyl 2-bromoisobutyrate (BBI), has been introduced to monitor the evolution of molar masses and polydispersity indexes (PDIs) of PS and PVDM onto the Wang resin support without cleavage. After 6 h, 86.7% conversion of VDM is reached, with the isolated PVDM chains having a molar mass of 18 000 g mol(-1) and a PDI value of 1.22. Block copolymers have been synthesized in two steps, involving the synthesis of the PS block isolated at low conversions (<15%) to maintain the bromine end-chain functionality and the subsequent synthesis of the second PVDM or P(S-stat-VDM) block. Polydispersity indexes of the cleaved (co)polymers were low (PDI = 1.11-1.44), and high azlactone loadings have been reached (loading = 6.0 mmol g(-1)). Such azlactone-functionalized Wang resins have shown high efficiency during the scavenging process of benzylamine as monitored by HPLC. Moreover, grafted statistical copolymers have shown the best behavior for removing benzylamine because of an improvement of the accessibility of azlactone rings by the dilution with styrene units.     

Synthesis of novel crosslinkable polymers by atom transfer radical polymerization of cardanyl acrylate

In this work, the successful application of atom transfer radical polymerization (ATRP) to cardanyl acrylate, a polymerizable monomer derived from a renewable resource cardanol, is reported. Polycardanyl acrylate and poly(methylmethacrylate)‐cardanyl acrylate copolymers were prepared in bulk ATRP, using Copper(I) bromide/N, N, N′, N′, N″‐pentamethyl diethylene triamine (PMDETA) catalyst system at 95 °C in combination with ethyl‐2‐bromo isobutyrate initiator. The copolymers had mol. wt. (M_n) in the range 8300–2400 g/mol and polydispersity index (PDI) 1.27–2.00, depending upon the [M]₀/[I]₀ ratio. ¹H NMR analysis of the copolymer showed that unsaturation in the side chain of cardanyl acrylate is unaffected under the conditions of ATRP. This was further confirmed by studying the curing reaction of polycardanyl acrylate by supported dynamic mechanical thermal analysis (DMTA) in dual cantilever mode. The thermogravimetric analysis shows that the copolymers have improved thermal stability, by about 35 °C, in comparison with pure PMMA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5953–5961, 2005     

Well‐Defined Iron Complexes as Efficient Catalysts for “Green” Atom‐Transfer Radical Polymerization of Styrene,Methyl Methacrylate,and Butyl Acrylate with Low Catalyst Loadings and Catalyst Recycling

Environmentally friendly iron(II) catalysts for atom‐transfer radical polymerization (ATRP) were synthesized by careful selection of the nitrogen substituents of N,N,N‐trialkylated‐1,4,9‐triazacyclononane (R₃TACN) ligands. Two types of structures were confirmed by crystallography: “[(R₃TACN)FeX₂]” complexes with relatively small R groups have ionic and dinuclear structures including a [(R₃TACN)Fe(μ‐X)₃Fe(R₃TACN)]⁺ moiety, whereas those with more bulky R groups are neutral and mononuclear. The twelve [(R₃TACN)FeX₂]_n complexes that were synthesized were subjected to bulk ATRP of styrene, methyl methacrylate (MMA), and butyl acrylate (BA). Among the iron complexes examined, [{(cyclopentyl)₃TACN}FeBr₂] ( 4 b ) was the best catalyst for the well‐controlled ATRP of all three monomers. This species allowed easy catalyst separation and recycling, a lowering of the catalyst concentration needed for the reaction, and the absence of additional reducing reagents. The lowest catalyst loading was accomplished in the ATRP of MMA with 4 b (59 ppm of Fe based on the charged monomer). Catalyst recycling in ATRP with low catalyst loadings was also successful. The ATRP of styrene with 4 b (117 ppm Fe atom) was followed by precipitation from methanol to give polystyrene that contained residual iron below the calculated detection limit (0.28 ppm). Mechanisms that involve equilibria between the multinuclear and mononuclear species were also examined.     

Controlled synthesis of new amphiphilic glycopolymers with liquid crystal grafts

A cholesterol‐based liquid crystal monomer, diethylene glycol cholesteryl ether acrylate (DEGCholA), has been successfully polymerized by atom transfer radical polymerization (ATRP) for the first time. Appropriate experimental conditions to control the polymerization of DEGCholA have been investigated using a model initiator (ethyl 2‐bromoisobutyrate) in tetrahydrofuran (THF) or toluene at 60 °C. Well‐controlled ATRP of DEGCholA was obtained using N,N,N′,N′,N″‐pentamethyldiethylenetriamine as ligand in THF at 60 °C. These conditions were then applied to initiate the ATRP of DEGCholA from multifunctional macroinitiators based on dextran. Using a protection/deprotection synthetic scheme, novel graft glycopolymers (Dex‐g‐PDEGCholA) have been synthesized. The mesomorphic properties of DEGCholA, PDEGCholA, and Dex‐g‐PDEGCholA have been studied by thermal polarizing optical microscopy, differential scanning calorimetry, and X‐ray scattering. PDEGCholA and Dex‐g‐PDEGCholA show an interdigitated smectic A phase (SmA_d) between T_g (～30 °C) and around 170 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3829–3839     

Cu(II)‐Mediated ATRP of MMA by Using a Novel Tetradentate Amine Ligand with Oligo(ethylene glycol) Pendant Groups

A novel tetradentate amine ligand namely N,N,N′,N″,N‴;,N‴;‐hexaoligo(ethylene glycol) triethylenetetramine (HOEGTETA) was employed in the homogenous ATRP of MMA in anisole using CuBr and CuBr₂ as the catalyst and ethyl 2‐bromoisobutyrate (EBiB) as an initiator. The effect of the polymerization temperature and the various ratios of Cu(I) to Cu(II) were investigated in detail. Moreover, we demonstrated the ATRP of MMA by using only Cu(II) in the absence of any free radical initiator, reducing agent, or air. The ATRP of MMA with the use of only Cu(II) and HOEGTETA or N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) resulted in well‐defined PMMA.

     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

An oxazol‐5(4H)‐one from benzyloxy­carbonyl‐(Aib)4‐OH

Benzyl N‐[8‐(4,4‐dimethyl‐5‐oxo‐4,5‐dihydrooxazol‐2‐yl)‐2,5,5,8‐tetra­methyl‐3,6‐dioxo‐4,7‐diazanon‐2‐yl]­carbamate, C₂₄H₃₄N₄O₆, an oxazol‐5(4H)‐one from N‐α‐benzyloxycarbonyl‐(Aib)₄‐OH (Aib = α‐amino­isobutyryl) represents the longest peptide oxazolone so far characterized by X‐ray diffraction. The overall geometry of the oxazolone ring compares well with literature data. The Aib(1) and Aib(2) residues are folded into a type III β‐bend, while the conformation adopted by Aib(3), preceding the oxazolone moiety, is semi‐extended. The disposition of the oxazolone ring relative to the preceding residue is stabilized by C—­H?N and C—H?O intramolecular interactions.     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.