Surface modification of multiwalled carbon nanotubes via nitroxide‐mediated radical polymerization

The nitroxide‐mediated radical polymerization of styrene was carried out on the surfaces of multiwalled carbon nanotubes (MWNTs) initiated by an MWNT‐supported initiator multiwalled carbon nanotube–2″,2″,6″,6″‐tetramethylpiperidinyloxy (MWNT–Tempo). The content of polystyrene grafted from the surface was controlled by changes in the polymerization conditions, such as the reaction times or the ratios of monomers to initiators. The obtained polystyrene‐grafted multiwalled carbon nanotubes (MWNT–PSs) were further used to initiate the polymerization of 4‐vinylpyridine to get polystyrene‐b‐poly(4‐vinylpyridine)‐grafted multiwalled carbon nanotubes (MWNT–PS‐b‐P4VPs). In contrast to unmodified MWNTs, MWNT–PSs had relatively good dispersibility in various organic solvents, such as tetrahydrofuran, CHCL₃, and o‐dichlorobenzene. The structures and properties of MWNT–PSs and MWNT–PS‐b‐P4VPs were characterized and studied with several methods, including thermogravimetric analysis, Fourier transform infrared, ultraviolet–visible, and transmission electron microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4656–4667, 2006     

Functionalized multi‐walled carbon nanotubes with poly(N‐(2‐hydroxypropyl)methacrylamide) by RAFT polymerization

In this study, we grafted water‐soluble biocompatible polymer, poly(N‐(2‐hydroxypropyl)methacrylamide) (PHPMA), onto the surface of multi‐walled carbon nanotubes (MWNTs). The reversible addition‐fragmentation chain transfer (RAFT) agents, dithioesters, were successfully immobilized onto the surface of MWNTs first, PHPMA chains were then subsequently grafted onto MWNTs via RAFT polymerization by using dithioesters immobilized on MWNTs as RAFT agent. FTIR, XPS, ¹H NMR, Raman and TGA were used to characterize the resulting products and to determine the content of water‐soluble PHPMA chains in the product. The MWNTs grafted with PHPMA chains have good solubility in distilled water, PBS buffer, and methanol. TEM images of the samples provide direct evidence for the formation of a nanostructure that MWNTs coated with polymer layer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2419–2427, 2006     

Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

Grafting Efficiency of Hydroxy‐Terminated Poly(methyl methacrylate) with Multiwalled Carbon Nanotubes

Summary: Poly(methyl methacrylate)s (PMMAs) containing a terminal hydroxy group or multiple hydroxy groups as pendants were grafted to multiwalled carbon nanotubes (MWNTs) by esterification in toluene at 100 °C. The recovered polymer with a low level of MWNTs and the PMMA‐g‐MWNTs with up to 12 wt.‐% grafted polymer were characterized using spectroscopic, microscopic, and thermogravimetric analyses. The percentage of polymer present in the PMMA‐g‐MWNT samples is very low based upon the concentration of the acid groups in the tubes.

The grafting of hydroxy‐terminated PMMA to MWNTs by esterification.     

Competition between supernucleation and plasticization in the crystallization and rheological behavior of PCL/CNT‐based nanocomposites and nanohybrids

PCL was blended with pristine multiwalled carbon nanotubes (MWCNT) and with a nanohybrid obtained from the same MWCNT but grafted with low molecular weight PCL, employing concentrations of 0.25 to 5 wt % of MWCNT and MWCNT‐g‐PCL. Excellent CNT dispersion was found in all samples leading to supernucleation of both nanofiller types. Nanohybrids with 1 wt % or less MWCNTs crystallize faster than nanocomposites (due to supernucleation), while the trend eventually reverses at higher nanotubes content (because of plasticization). Rheological results show that yield‐like behavior develops in both nanocomposites, even for the minimum content of carbon nanotubes. In addition, the MWCNT‐g‐PCL family, when compared with the neat polymer, exhibits lower values of viscosity and modulus in oscillatory shear, and higher compliance in creep. These rheological differences are discussed in terms of the plasticization effect caused by the existence of low molecular weight free and grafted PCL chains in the nanohybrids. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1310–1325     

“Click” coupling between alkyne‐decorated multiwalled carbon nanotubes and reactive PDMA‐PNIPAM micelles

Covalent functionalization of alkyne‐decorated multiwalled carbon nanotubes (MWNTs) with a well‐defined, azide‐derivatized, thermoresponsive diblock copolymer, poly(N,N‐dimethylacrylamide)‐poly(N‐isopropylacrylamide) (PDMA‐PNIPAM) was accomplished by the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition. It was found that this reaction could simultaneously increase the molecular size and bonding density of grafted polymers when PDMA‐PNIPAM micelles were employed in the coupling system. On the other hand, attachment of molecularly dissolved unimers of high‐molecular weight onto the nanotube resulted in low‐graft density. The block copolymer bearing azide groups at the PDMA end was prepared by reversible addition–fragmentation transfer polymerization, which formed micelles with a diameter of ～40 nm at temperatures above its critical micelle temperature. Scanning electron microscopy was utilized to demonstrate that the coupling reaction was successfully carried out between copolymer micelles and alkyne‐bearing MWNTs. FTIR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the MWNTs. Thermogravimetric analysis indicated that the functionalized MWNTs consisted of about 45% polymer. Transmission electron microscopy was utilized to image polymer‐functionalized MWNTs, showing relatively uniform polymer coatings present on the surface of nanotubes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7187–7199, 2008     

Effects of carbon nanotubes on crystallization and melting behavior of poly(L‐lactide) via DSC and TMDSC studies

In this work, multiwalled carbon nanotubes (MWNTs) were surface‐modified and grafted with poly(L ‐lactide) to obtain poly(L ‐lactide)‐grafted MWNTs (i.e. MWNTs‐g‐PLLA). Films of the PLLA/MWNTs‐g‐PLLA nanocomposites were then prepared by a solution casting method to investigate the effects of the MWNTs‐g‐PLLA on nonisothermal and isothermal melt‐crystallizations of the PLLA matrix using DSC and TMDSC. DSC data found that MWNTs significantly enhanced the nonisothermal melt‐crystallization from the melt and the cold‐crystallization rates of PLLA on the subsequent heating. Temperature‐modulated differential scanning calorimetry (TMDSC) analysis on the quenched PLLA nanocomposites found that, in addition to an exothermic cold‐crystallization peak in the range of 80–120 °C, an exothermic peak in the range of 150–165 °C, attributed to recrystallization, appeared before the main melting peak in the total and nonreversing heat flow curves. The presence of the recrystallization peak signified the ongoing process of crystal perfection and, if any, the formation of secondary crystals during the heating scan. Double melting endotherms appeared for the isothermally melt‐crystallized PLLA samples at 110 °C. TMDSC analysis found that the double lamellar thickness model, other than the melting‐recrystallization model, was responsible for the double melting peaks in PLLA nanocomposites. Polarized optical microscopy images found that the nucleation rate of PLLA was enhanced by MWNTs. TMDSC analysis found that the incorporation of MWNTs caused PLLA to decrease the heat‐capacity increase (namely, ΔC_p) and the C_p at glass transition temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1870–1881, 2007     

Nanocomposites derived from in situ grafting of linear and hyperbranched poly(ether‐ketone)s containing flexible oxyethylene spacers onto the surface of multiwalled carbon nanotubes

Linear and hyperbranched poly(ether‐ketone)s (PEKs) containing flexible oxyethylene spacers grafted multiwalled carbon nanotube (PEK‐g‐MWNT) nanocomposites were prepared by direct Friedel‐Crafts acylation as the polymer forming and grafting reaction. To achieve the composites, in situ polycondensations of AB monomers 3‐(2‐phenoxyethoxy)benzoic acid (3‐PEBA) and 4‐(2‐phenoxyethoxy)benzoic acid (4‐PEBA), and AB₂ monomer 3,5‐bis(2‐phenoxyethoxy)benzoic acid (3,5‐BPEBA) were carried out in the presence of multiwalled carbon nanotubes (MWNTs). The reaction conditions, polyphosphoric acid (PPA) with additional phosphorous phentoxide (P₂O₅) in the temperature range of 110–120 °C, were previously optimized. The conditions were used as the polymerization and grafting medium that were indeed benign not to damage MWNTs but strong enough to promote the covalent attachment of PEKs onto the surface of the electron‐deficient MWNTs. From scanning electron microscopy (SEM) and transmission electron microscopy studies, the polymers were uniformly grafted onto the MWNTs. The resultant nanocomposites are soluble in most strong acids such as trifluoroacetic acid, methanesulfonic acid, and sulfuric acid. Both isothermal and dynamic TGA studies in air showed that nanocomposites displayed improved thermo‐oxidative stability when compared with those of corresponding PEK homopolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3471–3481, 2008     

Supramolecular Self‐Assembly of Polymer‐Functionalized Carbon Nanotubes on Surfaces

Summary: Supramolecular self‐assembly of poly(methyl methacrylate)‐grafted multiwalled carbon nanotubes (MWNT‐g‐PMMA) was reported herein. The MWNT‐g‐PMMA (85 wt.‐% PMMA) dispersed in tetrahydrofuran could self‐assemble into suprastructures on surfaces such as gold, mica, silicon, quartz, or carbon films. With decreasing concentration of the MWNT‐g‐PMMA from 3 to 0.1 mg · mL⁻¹, the assembled structures changed from cellular and basketwork‐like forms to multilayer cellular networks and individual needles. SEM, AFM, and TEM measurements confirmed the morphology of the assembled suprastructures, and revealed the assembly mechanism. Phase separation during evaporation of the solvent drives the MWNT‐g‐PMMA nanohybrids to assemble and form the suprastructures, and the rigid MWNTs stabilize the structures.

SEM images of self‐assembled suprastructures of basketwork (a), cellular network (b), and needles (c) from the THF solution of the PMMA‐grafted MWNTs on gold surface.     

Preparation,structure, and property of polyoxymethylene/carbon nanotubes thermal conducive composites

Polyoxymethylene (POM)/multiwalled carbon nanotubes (MWNTs) nanocomposites were prepared through a simple solution‐evaporation method assisted by ultrasonic irradiation. To enhance the dispersion of MWNTs in POM, MWNTs were chemically functionalized with PEG‐substituted amine (MWNT‐g‐PEG), which exhibited strong affinity with POM due to their similar molecular structure. The thermal conductivity and the mechanical properties of the composites were investigated, which showed that the thermal conductive properties of POM were improved remarkably in the presence of MWNTs, whereas reduced by using MWNT‐g‐PEG due to the heat transport barrier of the grafted‐PEG‐substituted amine chain. A nonlinear increase of the thermal conductivity was observed with increasing MWNTs content, and the Maxwell‐Eucken model and the Agari model were used for theoretical evaluation. The relatively high effective length factor of the composite predicted with mixture equation indicated that there were few entangles of MWNTs for the samples of MWNT‐g‐PEG in the composites. The mechanical strength of the composites can be improved remarkably by using suitable content of such functionalized MWNTs, and with the increase of the aliphatic chain length of PEG‐substituted amine, the toughness of the composites can be enhanced. Transmission electron microscope result indicated that MWNT‐g‐PEG exhibited strong affinity with POM and a good dispersion of MWNTs was achieved in POM matrix. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 905–912, 2010     

In Situ polymerization functionalization of single‐walled carbon nanotubes with polystyrene

The in situ polymerization functionalization of single‐walled carbon nanotubes (SWNT) with polystyrene (PS) is demonstrated utilizing stabilized nanotubes reduced by dissolution of excess lithium in ammonia. Short PS chains are tethered to SWNT sidewalls to facilitate a robust compatibilization strategy for nanotube dispersion. To augment extents of functionalization, while maintaining in situ dispersion stability, the effects of multiple monomer addition steps and varied carbon to lithium ratio are studied. The developed functionalization scheme is also effective for the reductive alkylation of SWNT with dodecyl surface groups. By studying the dodecylated SWNT, the molecular weight of grafted PS chains is estimated. The discovery of a general experimental artifact has implications for all functionalization routes utilizing reduction with lithium in ammonia. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3716–3725     

Synthesis of polystyrene brush on multiwalled carbon nanotubes treated with KMnO4 in the presence of a phase‐transfer catalyst

Multiwalled carbon nanotubes (MWNTs) were effectively functionalized with KMnO₄ in the presence of a phase‐transfer catalyst at room temperature. The hydroxyl functionalized MWNTs were reacted with a vinyl‐group carrying silane‐coupling agent and the terminal vinyl groups were used to fabricate polystyrene (PS) brushes by solution polymerization. Finally, PS‐encapsulated MWNTs were obtained. The synthesis results were verified from FT‐Raman, thermal gravimetric analysis, energy dispersive X‐ray analysis, and transmission electron microscope. PS‐encapsulated MWNTs had much improved dispersion stability in hydrophobic medium, toluene since grafted hydrophobic PS interacts with media and has improved compatibility. This functionalization technique would provide a facile route to prepare various polymer brushes on the surface of MWNTs to improve the dispersion of MWNTs for potential applications. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4413–4420, 2007     

Multiwalled Carbon Nanotubes Functionalized by Hyperbranched Poly(urea‐urethane)s by a One‐Pot Polycondensation

Summary: Hyperbranched poly(urea‐urethane)‐functionalized multiwalled carbon nanotubes (MWNT‐HPUs) have been synthesized by a one‐pot polycondensation of tolylene 2,4‐diisocyanate and diethanolamine in the presence of MWNTs terminated with multiple hydroxy groups. FT‐IR, Raman, ¹H NMR, and ¹³C NMR spectra reveal that the HPU trees are covalently grafted onto the MWNT surfaces. After a high density of HPU trees (83.5 wt.‐%) is attached to the MWNTs, core‐shell nanostructures with MWNTs as the core and the HPU trees as the shell are formed. A loose and uniform nanotube network can be observed by TEM, SEM, and AFM. The resulting MWNT‐HPUs are soluble in polar solvents such as dimethylformamide, dimethylacetamine, 1‐methyl‐2‐pyrrolidinone, and dimethyl sulfoxide.

Hyperbranched poly(urea‐urethane)s functionalized multiwalled carbon nanotubes.     

Synthesis and characterization of polyethylene chains grafted onto the sidewalls of single‐walled carbon nanotubes via copolymerization

Polyethylene (PE) chains grafted onto the sidewalls of SWCNTs (SWCNT‐g‐PE) were successfully synthesized via ethylene copolymerization with functionalized single‐walled carbon nanotubes (f‐SWCNTs) catalyzed by rac‐(en)(THInd)₂ZrCl₂/MAO. Here f‐SWCNTs, in which α‐alkene groups were chemically linked on the sidewalls of SWCNTs, were synthesized by Prato reaction. The composition and microstructure of SWCNT‐g‐PE were characterized by means of ¹H NMR, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analyses (TGA), field‐emission scanning electron microscope (FESEM), and transmission electron microscope (TEM). Nanosized cable‐like structure was formed in the SWCNT‐g‐PE, in which the PE formed a tubular shell and several SWCNTs bundles existed as core. The formation of the above morphology in the SWCNT‐g‐PE resulted from successfully grafting of PE chains onto the surface of SWCNTs via copolymerization. The grown PE chains grafted onto the sidewall of the f‐SWCNTs promoted the exfoliation of the mass nanotubes. Comparing with pure PE, the physical mixture of PE/f‐SWCNTs and in situ PE/SWCNTs mixture, thermal stability, and mechanical properties of SWCNT‐g‐PE were higher because of the chemical bonding between the f‐SWCNTs and PE chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5459–5469, 2007     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Multiwalled carbon nanotubes covalently functionalized with poly(N‐vinylcarbazole) via RAFT polymerization: Synthesis and nonliner optical properties

The poly(N‐vinylcarbazole)‐grafted MWNTs (MWNT‐PVK) hybrid materials were synthesized in the presence of S‐1‐Dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate (DDAT)‐covalently functionalized multiwalled carbon nanotubes (MWNT‐DDAT) as reversible addition–fragmentation chain transfer (RAFT) agent. Incorporation of the PVK moieties onto the MWNTs surface can considerably improve the solubility and processability of MWNTs. For all MWNT‐PVK hybrid materials, they are soluble in some common organic solvents such as toluene, THF, chloroform, DMF and others. In contrast to the UV/Vis spectrum of DDAT‐PVK, which was synthesized by use of DDAT as RAFT agent under the same synthetic condition, in the visible region, the absorption spectrum of MWNT‐PVK exhibited a typical electronic absorption characteristics of solubilized carbon nanotubes, in which the absorbance decreases gradually in the range of 350–600 nm. At the same level of linear transmission the MWNT‐PVK with 79.2% PVK moieties in the material structure possesses best optical limiting performance in comparison with the other MWNT‐PVK composites, MWNTs and C₆₀. The significant NLO responses manifest the MWNT‐PVK materials suitable candidate for viable optical limiting devices. Light scattering, originating from the thermal‐induced microplasmas and/or microbubbles, is responsible for the optical limiting. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3161–3168, 2010     

Temperature‐Responsive Polymer/Carbon Nanotube Hybrids: Smart Conductive Nanocomposite Films for Modulating the Bioelectrocatalysis of NADH

A temperature‐sensitive polymer/carbon nanotube interface with switchable bioelectrocatalytic capability was fabricated by self‐assembly of poly(N‐isopropylacrylamide)‐grafted multiwalled carbon nanotubes (MWNT‐g‐PNIPAm) onto the PNIPAm‐modified substrate. Electron microscopy and electrochemical measurements revealed that these fairly thick (>6 μm) and highly porous nanocomposite films exhibited high conductivity and electrocatalytic activity. The morphological transitions in both the tethered PNIPAm chains on a substrate and those polymers wrapping around the MWNT surface resulted in the opening, closing, or tuning of its permeability, and simultaneously an electron‐transfer process took place through the channels formed in the nanostructure in response to temperature change. By combining the good electron‐transfer and electrochemical catalysis capabilities, the large surface area, and good biocompatibility of MWNTs with the responsive features of PNIPAm, reversible temperature‐controlled bioelectrocatalysis of 1,4‐dihydro‐β‐nicotinamide adenine dinucleotide with improved sensitivity has been demonstrated by cyclic voltammetry and electrochemical impedance spectroscopy measurements. The mechanism behind this approach was studied by Raman spectroscopy, in situ attenuated total reflection FTIR spectroscopy, and contact angle measurements. The results also suggested that the synergetic or cooperative interactions of PNIPAm with MWNTs gave rise not only to an increase in surface wettability, but also to the enhancement of the interfacial thermoresponsive behavior. This bioelectrocatalytic “smart” system has potential applications in the design of biosensors and biofuel cells with externally controlled activity. Furthermore, this concept might be proposed for biomimetics, interfacial engineering, bioelectronic devices, and so forth.     

Templated nanostructured PS‐b‐PEO nanotubes

With anodic aluminum oxide (AAO) membranes as wetting templates, nanotubes of the cylinder‐forming polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) copolymer were generated. The PS‐b‐PEO solution was introduced into the cylindrical nanopores of an AAO membrane by capillary force and polymeric nanotubes formed after solvent evaporation. Because of the water solubility of the cylindrical PEO microdomains and the orientation of the cylindrical PEO microdomains with respect to the nanotube walls, the nanotubes were permeable to aqueous media. PS‐b‐PEO nanotubes were also prepared on the interior walls of amorphous carbon nanotubes (a‐CNTs). Because of the unique water permeability of the PEO microdomains, an avenue for functionalizing the interior of the a‐CNTs is enabled. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2912–2917, 2007     

Polypeptide Modification of Multiwalled Carbon Nanotubes by a Graft‐From Approach

Summary: Covalent surface functionalization of carbon nanotubes with polypeptides is promising for possible medical applications. This work presents a graft‐from approach to perform the polypeptide modification of multiwalled carbon nanotubes (MWNTs). The raw MWNTs are first amine‐functionalized. The amine‐functionalized MWNTs are then used as the initiator to initiate the ring‐opening polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG‐NCA), to result in the polypeptide‐grafted MWNTs. FT‐IR, XPS, and TGA data demonstrate that the functionalization is successful. The TEM images of the products show that the thickness of the polypeptide shell of the PBLG‐MWNT is about 4.5–22 nm. Using the facile route developed here, carbon nanotubes functionalized with other types of polypeptides can be easily fabricated using the corresponding NCAs.

Strategy for the polypeptide modification of multiwalled carbon nanotubes by a graft‐from approach.     

Norbornene/n‐Butyl methacrylate copolymerization over α‐Diimine nickel and palladium catalysts supported on multiwalled carbon nanotubes

The covalently immobilized multiwalled carbon nanotubes (MWNTs) supported three‐dimensional geometry α‐diimine nickel, palladium catalysts are prepared by corresponding α‐diimine nickel, palladium complexes and activated MWNTs. The molecular structures of the catalysts have been confirmed by X‐ray single‐crystal analyses, NMR and XPS, as well as elemental analysis. Compared with nickel, palladium catalysts without modification and physical mixing of nickel, palladium catalysts with MWNTs, the MWNTs supported nickel, palladium catalysts show improved activity and productivity in norbornene homopolymerization and copolymerization with polar monomer. The morphology of the resulting polymers obtained from MWNTs‐supported nickel(II) complex reveals that the MWNTs are dispersed uniformly in polymer and wrapped by polymers to squeeze out of spherical particles, leading to the enhanced processability and mechanical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3213–3220