Novel Functionalized Microporous Organic Networks Based on Triphenylphosphine

This article describes the synthesis and functions of phosphine or phosphine oxide functionalized networks (PP? P or PP? PO; PP=porous polymer). These materials were predominantly microporous and exhibited high surface areas (S_BET: 1284 and 1353 m² g^?1 for PP? P and PP? PO, respectively), with high CO₂ (2.46 and 3.83 mmol g^?1 for PP? P and PP? PO, respectively) uptake capacities. Pd nanoparticles can be simply incorporated into the functionalized networks (PP? P? Pd or PP? PO? Pd) through a facile one‐step impregnation. A yield of 98 % was obtained in the Suzuki reaction between 1‐chlorobenzene and p‐tolylboronic acid with the PP? P? Pd system, which was higher than that obtained when PP? PO? Pd (53.2 %) or [Pd(PPh₃)₄] (38.2 %) was used as the catalyst. The superior catalytic ability of PP? P? Pd can be attributed to the structural features that incorporate triarylphosphine within a microporous structure.     

Synthesis of maleic anhydride grafted polyethylene and polypropylene,with controlled molecular structures

This article discusses a new chemical route to prepare maleic anhydride (MA) grafted polyethylene and polypropylene polymers with controlled molecular structure, that is, MA grafted content and polymer molecular weight and composition distributions. The chemistry involves a free radical graft reaction of maleic anhydride with poly(ethylene‐co‐p‐methylstyrene) and poly(propylene‐co‐p‐methylstyrene) copolymers. Under a suspension reaction condition, the grafting reaction takes place selectively on the p‐methylstyrene units in the copolymer, due to high reactivity of p‐methyl group and favorable mixing between p‐methylstyrene units and chemical reagents in the swollen amorphous phases. The resulting polymer shows no detectable molecular weight change during the reaction, and the MA grafted content increases with the increase of initiator and p‐methylstyrene concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1337–1343, 2000     

Synthesis and properties of poly(ethylene oxide)‐grafted polyethylene copolymer and terpolymer

A series of graft copolymers were synthesized based on ethylene‐co‐m,p‐methylstyrene (EMS) (backbone copolymer), ethylene‐1‐hexene‐m,p‐methylstyrene (EHMS) (backbone terpolymer), and polyethylene glycol monomethyl ethers (PEGM) (grafts) in this study. The PEGMs with molecular weights of 750 and 2000 were used. The chemical composition of the graft copolymers was analyzed by NMR and DSC measurements. The graft copolymers exhibited a phase‐separated morphology with the backbone and the methoxy polyethylene glycol (MPEG) grafts forming separate crystalline phases. The MPEG phase had a melting temperature lower than the corresponding MPEG homopolymer, as determined by DSC. The melting point of the crystalline phase formed by the EMS and EHMS main chains was lower than that of pure polymer backbone. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of ABCD‐type miktoarm star copolymers and transformation into zwitterionic star copolymers

ABCD‐type 4‐miktoarm star copolymers of styrene (St), α‐methylstyrene (αMSt), tert‐butyl methacrylate (tBuMA), and 4‐vinylpyridine (4VP) were synthesized via anionic polymerization using 1,3‐bis(1‐phenylvinyl)benzene (m‐DDPE) as the linking molecule. The synthetic route was rationally designed with respect to the reactivity of individual propagating anion towards the double bond of m‐DDPE. Thus the synthesis includes several consecutive key reactions, for example, the monoaddition of polystyryllithium towards m‐DDPE, the polymerization of tBuMA initiated by the resulting monoadduct to produce a diblock macromonomer, the coupling of the macromonomer with poly(α‐methylstyryl)lithium to form a 3‐arm star anion, and the polymerization of 4‐vinylpyridine initiated by the star anion. These reactions were conducted either in a one‐pot process, in which the diblock macromonomer was in situ coupled with poly(α‐methylstyryl)lithium, or in a batch polymerization process, in which the same diblock macromonomer was separated. The final product was hydrolyzed to produce a zwitterionic miktoarm star copolymer, which was soluble at lower pH but insoluble in neutral and basic solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4818–4828, 2007     

Morphology and nonisothermal crystallization of in situ microfibrillar poly(ethylene terephthalate)/polypropylene blend fabricated through slit‐extrusion,hot‐stretch quenching

This study describes the morphology and nonisothermal crystallization kinetics of poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) in situ micro‐fiber‐reinforced blends (MRB) obtained via slit‐extrusion, hot‐stretching quenching. For comparison purposes, neat PP and PET/PP common blends are also included. Morphological observation indicated that the well‐defined microfibers are in situ generated by the slit‐extrusion, hot‐stretching quenching process. Neat iPP and PET/iPP common blends showed the normal spherulite morphology, whereas the PET/iPP microfibrillar blend had typical transcrystallites at 1 wt % PET concentration. The nonisothermal crystallization kinetics of three samples were investigated with differential scanning calorimetry (DSC). Applying the theories proposed by Jeziorny, Ozawa, and Liu to analyze the crystallization kinetics of neat PP and PET/PP common and microfibrillar blends, agreement was found between our experimental results and Liu's prediction. The increases of crystallization temperature and crystallization rate during the nonisothermal crystallization process indicated that PET in situ microfibers have significant nucleation ability for the crystallization of a PP matrix phase. The crystallization peaks in the DSC curves of the three materials examined widened and shifted to lower temperature when the cooling rate was increased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 374–385, 2004     

End‐functionalization of isotactic polypropylene via consecutive chain transfer reaction to norbornadiene and hydrogen

Structurally well‐defined end functionalized isotactic polypropylene (iPP) is prepared by conducting a selective chain transfer reaction during the isospecific polymerization of propylene in the presence of norbornadiene (NBD) and hydrogen using rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ ZrCl₂/MAO as the catalyst. The production of NBD‐capped iPP involves a unique consecutive chain transfer reaction, first to NBD and then to hydrogen, for situating the incorporated NBD at the iPP chain end. The NBD end group of NBD‐capped iPP can be converted into other reactive functional group through functional group transformation reactions. The resulting functional group end‐capped iPP can be used for the construction of stereoregular block copolymers (e.g., iPP‐b‐PMMA and iPP‐b‐PS) through postpolymeriztion reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aromatic oxadiazole‐based conjugated polymers with excited‐state intramolecular proton transfer: Their synthesis and sensing ability for explosive nitroaromatic compounds

Aromatic polyoxadiazole derivatives containing 9,9′‐dioctylfluorene were successfully synthesized via the Suzuki coupling reaction. The oxadiazole moiety in the polymer backbone was linked with the bis(hydroxyphenyl) group in its 2‐position to exhibit a large Stokes shift in the emission spectrum due to the excited‐state intramolecular proton transfer. To prepare the polymer via the Suzuki cross‐coupling reaction, the hydroxyl group in the monomer was protected with the t‐butoxycarbonyl group before polymerization and removed after polymerization to a desirable extent. The polymer with the free hydroxyl group showed a considerable sensitivity for nitroaromatic compounds, exhibiting fluorescence quenching in a chloroform solution. The interaction between the electron‐donating OH group and electron‐deficient nitroaromatic compounds seemed to play a decisive role in fluorescence quenching. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2059–2068, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002     

Synthesis of ethylene/propylene elastomers containing a terminal reactive group: The combination of metallocene catalysis and control chain transfer reaction

This article discusses a chemical route to prepare new ethylene/propylene copolymers (EP) containing a terminal reactive group, such as ?‐CH₃ and OH. The chemistry involves metallocene‐mediated ethylene/propylene copolymerization in the presence of a consecutive chain transfer agent—a mixture of hydrogen and styrene derivatives carrying a CH₃ (p‐MS) or a silane‐protected OH (St‐OSi). The major challenge is to find suitable reaction conditions that can simultaneously carry out effective ethylene/propylene copolymerization and incorporation of the styrenic molecule (St‐f) at the polymer chain end, in other words, altering the St‐f incorporation mode from copolymerization to chain transfer. A systematic study was conducted to examine several metallocene catalyst systems and reaction conditions. Both [(C₅Me₄)SiMe₂N(^t‐Bu)]TiCl₂ and rac‐Et(Ind)₂ZrCl₂, under certain H₂ pressures, were found to be suitable catalyst systems to perform the combined task. A broad range of St‐f terminated EP copolymers (EP‐t‐p‐MS and EP‐t‐St‐OH), with various compositions and molecular weights, have been prepared with polymer molecular weight inversely proportional to the molar ratio of [St‐f]/[monomer]. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1858–1872, 2005     

Synthesis of functional polyethylene graft copolymers by nitroxide‐mediated living radical polymerization

This paper describes a new method to prepare graft copolymers, such as polyethylene‐g‐polystyrene (PE‐g‐PS), with a relatively well‐controlled reaction mechanism. The chemistry involves a transformation process from the metallocene copolymerization of ethylene and m,p‐methylstyrene (m,p‐MS) to nitroxide‐mediated “living” free radical polymerization (LRFP) of styrene. The metallocene catalysis produces ethylene‐co‐m,p‐methylstyrene (EMS) random copolymers. Next, 1‐hydroxyl‐2,2,6,6‐tetramethylpiperidine (HO‐TEMPO) was synthesized by the reduction of TEMPO with sodium ascorbate. The macroinitiator (EMS‐TEMPO) was synthesized with the bromination reaction of EMS, and the following nucleofilic reaction with this functional nitroxyl compound. The resulting macroinitiator (EMS‐TEMPO) for LRFP was then heated in the presence of styrene to form graft copolymer. DSC, ¹H‐NMR, FTIR spectroscopy were employed to investigate the structure of the polymers. The results of Molau test showed that PE‐g‐PS could be a potential good compatilizer. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of a π‐conjugated hybrid of oligothiophene and porphyrin

5‐(3‐Thienyl)‐10,15,20‐triethyl‐21H,23H‐porphine (H₂(ttep)) was synthesized and characterized. Oxidative polymerization of H₂(ttep) gave a novel oligomeric porphyrin linked at the 2,5‐positions of the thienyl group. Electric conductivity of 4 × 10^?1 S/cm after I₂ doping indicated that the oligomer had a π‐conjugated structure with a delocalization of π electrons over the thienylene backbone. PM3 calculations revealed a low HOCO‐LUCO gap, which was consistent with the relatively high electric conductivity. Regioregular (head‐to‐tail) structure was inferred from spectroscopic and calculational results. The pendant porphyrin groups formed a regular J‐type array along the thienylene backbone, which was indicated by a significant red shift of the Soret band maximum. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5403–5412, 2006     

Solvation characteristics of a model water‐soluble polymer

The model water‐soluble polymer poly(ethylene oxide) was used to investigate solvation characteristics in mixtures of d‐water (deuterated water) and d‐alcohols (deuterated alcohols). Three d‐alcohols have been used: d‐methanol, d‐ethanol, and d‐ethylene glycol. Small angle neutron scattering was used to monitor the solvation properties of poly(ethylene oxide) in the d‐solvent mixtures. Nonideal solvent mixing was observed throughout. Solvent mixtures were found to be more effective solvating agents than individual solvents. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3195–3199, 2006     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006     

Derivatization of propene/methyloctadiene copolymers: A flexible approach to side‐chain‐functionalized polypropenes

The copolymerization of propene with 7‐methyl‐1,6‐octadiene (MOD) catalyzed by Cp*TiMe₃/B(C₆F₅)₃ ( A ) and rac‐C₂H₄(Ind)₂ZrCl₂/methylaluminoxane ( B ) in toluene under 1 bar propene gave copolymers with unsaturated side chains. Under these conditions, catalyst A produced copolymers with an atactic backbone structure of type 1 , with 3.5–19.6 mol % MOD incorporation and weight‐average molecular weight = 0.7–2.7 × 10⁵. Using catalyst B , copolymers 2 with 0.4–3.8 mol % MOD incorporation were prepared. The comonomer incorporation was a linear function of the feed ratio. The titanium catalyst A had a significantly higher affinity for MOD than the sterically more hindered zirconocene B . Postpolymerization modification of the side‐chain C?C bond allowed the facile introduction of a wide variety of functional groups. Epoxidation and especially ozonolysis of the C?C bond, to give ? CHO and ? COOH functionalized copolymers, proved to be very facile routes to functionalized polypropenes. According to monitoring by NMR, most of these transformations proceed in an essentially quantitative conversion. As an example of potential applications of such polymers, polypropenes with covalently attached dyes were prepared that are suitable for blending. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1484–1497, 2002     

Synthesis of azide end‐functionalized isotactic polypropylene building block and renewed modular synthesis of diblock copolymers of isotactic polypropylene and poly(ε‐caprolactone)

This article details a synthesis of azide end‐functionalized isotactic polypropylene (i‐PP), a unique polymeric building block that can engage in Huisgen's 1,3‐dipolar cycloaddition of azide and alkyne (click reaction) to construct well‐defined i‐PP‐based polymer architecture. Controlled, consecutive chain transfer reaction to 1,2‐bis(4‐vinylphenyl)ethane and hydrogen in metallocene‐mediated propylene polymerization catalyzed by rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂/MAO resulted in styryl‐terminated i‐PP (i‐PP‐t‐St) of controlled molecular weight. Following a regioselective hydrochlorination reaction, the terminal styryl groups were quantatively transformed to 1‐chloroethylbenzene groups, which was further reacted with NaN₃ to give i‐PP terminated with an azide group (i‐PP‐t‐N₃). Structural monitoring of the polymers through the whole transformation process using ¹H NMR and FTIR as well as GPC and DSC reveals a clean and clear formation of i‐PP‐t‐N₃ (M_n in between 10,000 and 40,000 g/mol). This clickable i‐PP building block was applied to a renewed, modular synthesis of amphiphilic i‐PP‐b‐PCL (poly(ε‐caprolactone)) diblock copolymers. Composition‐diversified, structure‐well defined diblock copolymers were obtained in high yields, confirming both the high end group selectivity as well as high reactivity of azide the clickable moiety in the i‐PP building block and the effectiveness of azide‐alkyne click reaction in constructing new i‐PP architecture. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and polymerizability of CN monomers

The synthesis and polymerizability of imine C?N monomers is surveyed. The investigated imines were either far more reactive than similarly substituted C?C or C?O monomers, or too stable to polymerize. Imines with electron‐attracting substituents on N favor polymerization by anionic mechanism, but led only to low molecular weight polymers. Imines with a donor substituent on N, such as N‐arylmethyleneimines, polymerized by cationic or anionic mechanism. 1‐ and 2‐Aza‐1,3‐butadienes were also rather unstable and polymerized to oligomers. The symmetrically substituted 2,3‐diaza‐1,3‐butadienes could be purified and polymerized successfully using anionic initiators, resulting in both 1,4‐ and 1,2‐structures in the polymer backbone, depending on the substituents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyketanils. Polymers protonated with Bronsted acid

New luminescent materials—aromatic polyketanils (PKs) containing p‐phenylene and biphenylene linkages in the backbone and electron‐donating, side‐group substitutions—were synthesized via melt polycondensation with the goal of studying the interactions between the polymer chains (PKs), primary dopant [1,2‐(di‐2‐ethylhexyl)ester of 4‐sulfophthalic acid (PSA)], and secondary dopant [m‐cresol (MC)] with ¹H NMR, ¹³C NMR, Fourier transform infrared (FTIR), ultraviolet–visible, and photoluminescence measurements. Spectral changes were observed for the PKs after primary and secondary doping, and they supported ionic‐ and hydrogen‐bond formation between the PKs and the PSA and MC, respectively. This specific interaction of the dopant with the host polymer influenced the PK properties, and the following observations were made: (1) HOMO/LUMO energy gap of the protonated PKs; (2) bathochromic/hypsochromic photoluminescence shifts observed after protonation with PSA; (3) a downfield chemical shift of the labile proton in the protonating agent OH group in the ¹H NMR spectra of the protonated polymers; (4) a protonation decrease in the intensity of the C?N stretching band in the FTIR spectrum; and (5) a spherulite‐like morphology, detected by atomic force microscopy and polarized optical microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5645–5660, 2006     

Synthesis and crystallization behavior study of syndiotactic polystyrene‐g‐isotactic polypropylene (sPS‐g‐iPP) graft copolymers

Based on coordination polymerization mechanism only, novel stereoregular graft copolymers with syndiotactic polystyrene main chain and isotactic polypropylene side chain (sPS‐g‐iPP) were synthesized via two steps of catalytic reactions. First, a chain transfer reaction was initiated by a chain transfer complex composed of a styrene derivative, 1,2‐bis(4‐vinylphenyl)ethane, and hydrogen in propylene polymerization mediated by rac‐Me₂Si[2‐Me‐4‐Ph(Ind)]₂ZrCl₂ and MAO, which gave iPP macromonomer bearing a terminal styryl group (iPP‐t‐St). Then the iPP‐t‐St macromonomers of varied molecular mass were engaged in syndiospecific styrene polymerization over a typical mono‐titanocene catalyst (CpTiCl₃/MAO) under different conditions to produce sPS‐g‐iPP graft copolymers of varied structure. With an effective purification process, well‐defined sPS‐g‐iPP copolymers were obtained, which were then subjected to differential scanning calorimetry (DSC) and polarized optical micrograph (POM) studies. The graft copolymers were generally found with dual melting and crystallization temperatures, which were ascribable respectively to the sPS backbone and iPP graft. However, it was revealed that the two segments displayed largely different melting and crystallization behaviors than sPS homopolymer and the precursory iPP‐t‐St macromonomer. Consequently, the graft copolymer exhibited much distinctive crystalline morphologies when compared with their individual components. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.