Copolymers containing a spiro orthoester moiety that undergo no shrinkage during cationic crosslinking

A spiro orthoester with an exomethylene group (exoSOE) was radically copolymerized with acrylonitrile or vinyl acetate at several feed ratios to obtain the corresponding copolymers having spiro orthoester moieties in the side chain. The obtained copolymers could be crosslinked via the double ring‐opening polymerization of the spiro orthoester moieties in their side chain by a treatment with BF₃OEt₂. The volume changes upon the crosslinking of the copolymers were evaluated by density measurements with a micromeritics gas pycnometer. The copolymers experienced less than 1% volume expansion instead of volume shrinkage during typical cationic crosslinking, regardless of the copolymer compositions. Negligible shrinkage was observed during the thermal cationic crosslinking of a film cast from a nitrobenzene solution of the copolymers containing a benzylthiophenium salt as a thermally latent cationic initiator. The constantly low volume changes during the crosslinking of the copolymers from exoSOE probably depended on the almost zero volume change during the cationic polymerizations of spiro orthoester derivatives. This indicates that exoSOE is an effective monomer for crosslinkable polymers without volume changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3666–3673, 2006     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis of novel copolymers obtained from acceptor/donor radical copolymerization of phosphonated allyl monomers and maleic anhydride

A series of four phosphonated‐bearing allyl monomers, that is, diethyl‐1‐allylphosphonate ( AP ), dimethyl‐1‐allyloxymethylphosphonate ( AOP ), 5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPH ), and 2‐benzyl‐5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPBn ) were synthesized. These monomers were then copolymerized by free radical polymerization in the presence of maleic anhydride, thus leading to alternated copolymers with phosphonate moieties. It was shown that both monomer conversion and reaction rate were dependent on the phosphonate moieties carried out by the allyl monomer: the bulkier the phosphonate group, the higher the polymerization rate. Thermogravimetric analysis of the copolymers revealed a high content of residue, also varying with the nature of the phosphonate moieties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and cationic ring-opening polymerization of mono- and bifunctional spiro orthoesters containing ester groups and depolymerization of the obtained polymers: An approach to chemical recycling for polyesters as a model system

A spiro orthoester having an ester moiety, 2-acetoxymethyl-1,4,6-trioxaspiro[4.6]undecane (4) was synthesized, and its cationic polymerization and depolymerization of the obtained polymer (5) were carried out. The monomer 4 underwent cationic polymerization with a cationic catalyst to afford the corresponding poly(cyclic orthoester) 5. The obtained polymer 5 could be depolymerized with a cationic catalyst to regenerate the monomer 4 in an excellent yield. Further, bifunctional spiro orthoesters (6, 8, 9) having diester moieties were synthesized from terephthalic acid, succinic acid, and 1,4-cyclohexanedicarboxylic acid, and their acid-catalyzed reversible crosslinking–decrosslinking was examined. The bifunctional monomer 6 derived from terephthalic acid underwent cationic crosslinking to afford the corresponding network polymer (7), which could be also depolymerized to regenerate the original bifunctional monomer 6. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2551–2558, 1999     

Novel dialkyl vinyl ether phosphonate monomers: Their synthesis and alternated radical copolymerizations with electron‐accepting monomers

Three new vinyl ether monomers containing phosphonate moieties were synthesized from transetherification reaction. We showed that the yield was dependent on the spacer length between the vinyl oxy group and the phosphonate moieties: when the spacer is a single methylene side reaction may occur, leading to the formation of acetal compounds. Free‐radical copolymerizations of phosphonate‐containing vinyl ether monomers with maleic anhydride were carried out, leading to alternated copolymers of rather low molecular weights (from 1000 to 7000 g/mol). Both gel permeation chromatography and ³¹P NMR analyses enhanced possible intramolecular transfer reactions occurring from the phosphonate moieties. Kinetic investigation showed that the electron‐withdrawing character of the phosphonate moieties tends to decrease the rate of copolymerization. Nevertheless, almost complete monomers conversion was reached after 30 min of reaction with dimethyl vinyloxyethylphosphonate (VEC₂PMe). Then, radical copolymerization of VEC₂PMe with a series of electron‐accepting monomers, that is, dibutyl maleate, dibutylitaconate, itaconic anhydride, butyl maleimide, and methyl maleimide, led to a series of alternated copolymers. From kinetic investigation, we showed that the higher the electron‐accepting effect, the faster the vinyl ether consumption and the higher the molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

Chain microstructure of homogeneous ethylene‐1‐alkene copolymers and characteristics of single site catalysts using a direct 13C NMR peak method I. Theory and models

To describe the detailed microstructure of homogeneous ethylene‐1‐alkene copolymer chains and to study the characteristics of single site catalysts, Markov statistics are used to fit peak intensities of all relevant ¹³C NMR signals of series of copolymers. In the case of the occurrence of inverted comonomer units, a first‐order Markov terpolymer is applied, otherwise a second‐order Markov copolymer model. Chain propagation probabilities are obtained via modeling of the entire NMR spectrum. This procedure results in an accurate reproduction of the chain microstructure, including ethylene, 1‐alkene, and methylene sequence length distributions. If the experimental (co)monomer feeds are known, the reactivity ratios and the theoretical (co)monomer feeds are also found providing information about the copolymerization kinetics and the characteristics of the catalyst. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 722–737, 2006     

Free‐radical copolymerization of ethyl α‐hydroxymethylacrylate with methyl methacrylate by reversible addition–fragmentation chain transfer

The controlled free‐radical homopolymerization of ethyl α‐hydroxymethylacrylate and copolymerization with methyl methacrylate were performed in chlorobenzene at 70 °C by the reversible addition–fragmentation chain transfer polymerization technique with 2,2′‐azobisisobutyronitrile as the initiator. 2‐Phenylprop‐2‐yl dithiobenzoate and 2‐cyanoprop‐2‐yl dithiobenzoate were used as chain‐transfer agents in the homopolymerization, whereas only the former was used in the copolymerization. All reactions presented pseudolinear kinetics. The effect of the monomer feed ratio on the copolymerization kinetics was examined. The conversion level decreased when the proportion of ethyl α‐hydroxymethylacrylate in the monomer feed was larger. Kinetic studies indicated that the radical polymerizations proceeded with apparent living character according to experiments, demonstrating an increase in the molar mass with the monomer conversion and a relatively narrow molar mass distribution. All copolymers were statistical in chain structure, as confirmed by determinations of the monomer reactivity ratios. The monomer reactivity ratios were determined, and the Mayo–Lewis terminal model provided excellent predictions for the variations of the intermolecular structure over the entire conversion range. Additionally, the chemical modification of poly(ethyl α‐hydroxymethylacrylate) was carried out to introduce glucose pendant groups into the structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5618–5629, 2006     

Ring opening insertion polymerization of ε‐caprolactone with hydrogen phosphonate initiators

In this work, ring opening insertion polymerization (ROIP) of ε‐caprolactone (ε‐CL) using a series of hydrogen phosphonates (H‐phosphonates) as initiators was investigated. The ROIP occurred by a coordination‐insertion mechanism containing two steps. First, the carbonyl carbon was attacked by the phosphorus atom of the H‐phosphonate tautomerization (a phosphine‐like structure) and the acyl‐oxygen bond was broken. An intermediate was formed by the coordination of the former carbonyl carbon and acyl‐oxygen of ε‐CL to phosphorus atom. Then the phosphorus‐alkoxide of H‐phosphonate was cleavaged to form acyl‐alkoxide bond. Poly(ε‐caprolactone) (PCL)‐inserted H‐phosphonates (PCL‐HPs), which was not only the product of the occurred ROIP but also the initiator for the next ROIP, were produced. After 60 min of microwave irradiation (510 W), PCL with a number‐average molar mass of 7800 g/mol and monomer conversion over 92% was obtained. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6214–6222, 2009     

螺环原酸酯类膨胀化合物研究进展

膨胀单体的特点是在聚合过程中没有体积收缩,甚至会产生体积膨胀,这种特殊的性能使其具有广阔的应用前景。目前可用作膨胀单体的螺环化合物主要有螺环原碳酸酯(SOC)、螺环原酸酯(SOE)和双环原酸酯(BOE)。螺环原酸酯(SOE)是最早发现能进行膨胀聚合反应的一类化合物。本文介绍了螺环原酸酯类化合物的发现、合成方法、聚合反应及应用的研究进展,并提出未来的发展前景。     

Synthesis of hydrophilic sorbents from N‐vinylimidazole/divinylbenzene and the evaluation of their sorption properties in the solid‐phase extraction of polar compounds

This article reports the synthesis of N‐vinylimidazole/divinylbenzene resins by suspension polymerization. Several polymerization conditions were tested to achieve a quantitative incorporation of the N‐vinylimidazole monomer into the final polymer while a high specific surface area was maintained. The retention properties of several copolymers with different nitrogen contents were evaluated with the solid‐phase extraction of polar compounds from water samples, and the best results were obtained for a polymer containing 6.3% N with a surface area of 627 m² g^?1. The sorption properties of the resins were compared to those of styrene–divinylbenzene and other copolymers containing nitrogen, and the results were best for the new sorbents with N‐vinylimidazole as the polar monomer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2019–2025, 2004     

A bicyclic conjugated diene monomer,tetrahydroindene, for cationic polymerization and a novel alicyclic hydrocarbon polymer with heat resistance

This study was directed toward the cationic polymerization of tetrahydroindene (i.e., bicyclo[4.3.0]‐2,9‐nonadiene), a bicyclic conjugated diene monomer, with a series of Lewis acids, especially focusing on the synthesis of high‐molecular‐weight polymers and subsequent hydrogenation for novel cycloolefin polymers with high service temperatures. EtAlCl₂ or SnCl₄ induced an efficient and quantitative cationic polymerization of tetrahydroindene to afford polymers with relatively high molecular weights (number‐average molecular weight > 20,000) and 1,4‐enchainment bicyclic main‐chain structures. The subsequent hydrogenation of the obtained poly(tetrahydroindene) with p‐toluenesulfonyl hydrazide resulted in a saturated alicyclic hydrocarbon polymer with a relatively high glass transition (glass‐transition temperature = 220 °C) and improved pyrolysis temperature (10% weight loss at 480 °C). The new diene monomer was randomly copolymerized with cyclopentadiene at various feed ratios in the presence of EtAlCl₂ to give novel cycloolefin copolymers, which were subsequently hydrogenated into alicyclic copolymers with variable glass‐transition temperatures (70–220 °C). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6214–6225, 2006     

Copolymerization of N‐vinylcaprolactam and glycidyl methacrylate: Reactivity ratio and composition control

Free‐radical copolymerizations of N‐vinylcaprolactam (VCL) and glycidyl methacrylate (GMA) were investigated to synthesize temperature‐responsive reactive copolymers with minimized compositional heterogeneity. The average copolymer composition was determined by Fourier transform infrared and nuclear magnetic resonance techniques. The reactivity ratios for VCL and GMA were found to be 0.0365 ± 0.0009 and 6.44 ± 0.36 by the Fineman–Ross method and 0.039 ± 0.006 and 6.75 ± 0.29 by the Kelen–Tudos method, respectively. When prepared by batch polymerization, VCL–GMA copolymers had a highly heterogeneous composition and fractions of different solubilities in water. The use of a gradual feeding technique, which included the sequential addition of more reactive GMA monomer into the reaction, yielded copolymers with much more homogeneous composition. The produced copolymers with 0.9 and 0.11 fractional GMA contents preserved their temperature‐responsive properties and precipitated from aqueous solutions when the temperature exceeded 31 °C. The GMA units in the VCL–GMA copolymers were capable of reacting with amino end‐functionalized poly(ethylene oxide) at room temperature to produce poly(N‐vinylcaprolactam)–poly(ethylene oxide) graft copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 183–191, 2006     

Synthesis of diblock copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with an initiating group for atom transfer radical polymerization (ATRP), 4‐(2‐bromo‐2‐methylpropionyloxy)‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (Br‐TEMPO), was synthesized by the reaction of 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy with 2‐bromo‐2‐methylpropionyl bromide. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br‐TEMPO. The obtained polystyrene had an active bromine atom for ATRP at the ω‐end of the chain and was used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare block copolymers. The molecular weights of the resulting block copolymers at different monomer conversions shifted to higher molecular weights and increased with monomer conversion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2468–2475, 2006     

Copolymers of 2,5‐bis[(4‐methoxyphenyl) oxycarbonyl]styrene with styrene and methyl methacrylate: Synthesis,monomer reactivity ratios,thermal properties,and liquid crystalline behavior

Copolymers of a liquid crystalline monomer, 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene (MPCS), with St and MMA were prepared by free radical polymerization at low conversion in chlorobenzene with 2,2′‐azobisisobutyronitrile (AIBN) as initiator. The copolymers of poly(MPCS‐co‐St) and poly(MPCS‐co‐MMA) were characterized by ¹H NMR and GPC. The monomer reactivity ratios were determined by using the extended Kelen–Tudos (EKT) method. Structural parameters of the copolymers were obtained from the possibility statistics and monomer reactivity ratios. The influence of MPCS content in copolymers on the glass transition temperatures of copolymers was investigated by DSC. The thermal stabilities of the two copolymer systems increased with an increase of the molar fraction of MPCS in the copolymers. The liquid crystalline behavior of the copolymers was also investigated using DSC and POM. The results revealed that the copolymers with high MPCS molar contents exhibited liquid crystalline behaviors. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2666–2674, 2005     

Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fatty acid derived phosphorus‐containing polyesters via acyclic diene metathesis polymerization

The acyclic diene metathesis (ADMET) polymerization of a phosphorus‐containing α,ω‐diene prepared from a plant oil derived building block is reported. Different ruthenium based metathesis catalysts and conditions were tested to optimize the ADMET polymerization of this monomer. Undecylenyl undecenoate was used as fully renewable comonomer to obtain polyesters with different phosphorus contents and to increase the renewable content of the final polymers. Copolymerization caused marked variations in the molecular weights leading to polyesters from 6 to 38 KDa. The effect of the ADMET polymerization temperature in the thermal properties of the copolymers was studied and their thermal degradation and flame retardant properties were evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5760–5771, 2009     

Thermal dissociation behavior of copolymers bearing hemiacetal ester moieties and their reactions with epoxides

Copolymers from 1‐propoxyethyl methacrylate and various vinyl monomers such as n‐butyl methacrylate and styrene were synthesized, and the thermal dissociation reaction of the copolymers containing the hemiacetal ester structure was examined. The copolymers, having the ability of thermal dissociation, could control the thermal dissociation temperature because of the bulkiness and flexibility of the vinyl comonomers, the copolymer compositions, and so on. Furthermore, the possibility of control of the initiation in thermally latent addition with epoxides in the case of copolymers was also studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3966–3977, 2006     

Interfacial living radical copolymerization of oil‐ and water‐soluble comonomers to form composite polymer capsules

The suspension copolymerization of methyl methacrylate with hydroxy‐functional poly(ethylene glycol) monomethacrylate (PEGMA) by atom transfer radical polymerization (ATRP) yielded soluble, controlled‐molecular‐weight amphiphilic copolymers (weight‐average molecular weight/number‐average molecular weight <1.3). Despite extensive partitioning of PEGMA into the water phase, copolymers containing up to 24 mol % PEGMA were formed in the oil phase, from comonomer feeds containing 30 mol % PEGMA. Conversions by suspension polymerization were comparable to those obtained by solution polymerization, at over 70%. Suspension copolymers with high PEGMA contents contained high‐molecular‐weight polymer formed by uncontrolled polymerization, unless poly(vinyl pyrrolidone) was added to displace the growing polymer from the interface. The addition of diethylene glycol dimethacrylate gave capsules at 17 mol % PEGMA with ATRP, whereas conventional free‐radical polymerization required 24 mol % PEGMA to form capsules. The lower PEGMA level required for capsule formation with ATRP was attributed to the lower rates of propagation and crosslinking and to improved incorporation of PEGMA into the final gels. Suspension ATRP with 24 mol % PEGMA in the feed gave two‐layer capsule walls consisting of an inner layer visible by transmission electron microscopy and an outer layer visible by both transmission electron microscopy and environmental scanning electron microscopy, which indicated a compositional gradient across the capsule wall. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 156–171, 2006