Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxy complexes

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxides {1,4‐dithiabutanediylbis(4,6‐di‐tert‐butylphenolate)}(isopropoxy)indium ( 1 ) and {1,4‐dithiabutanediylbis(4,6‐di(2‐phenyl‐2‐propyl)phenolate)}(isopropoxy)indium ( 2 ) is found to follow first‐order kinetics for monomer conversion. Activation parameters ΔH^? and ΔS^? suggest an ordered transition state. Initiators 1 and 2 polymerize meso‐lactide faster than rac‐lactide. In general, compound 2 with the more bulky cumyl ortho‐substituents in the phenolate moiety shows higher polymerization activity than 1 with tert‐butyl substituents. meso‐Lactide is polymerized to syndiotactic poly(meso‐lactides) in THF, while polymerization of rac‐lactide in THF gives atactic poly(rac‐lactides) with solvent‐dependent preferences for heterotactic (THF) or isotactic (CH₂Cl₂) sequences. Indium bis(phenolate) compound rac‐(1,2‐cyclohexanedithio‐2,2′‐bis{4,6‐di(2‐phenyl‐2‐propyl)phenolato}(isopropoxy)indium ( 3 ) polymerizes meso‐lactide to give syndiotactic poly(meso‐lactide) with narrow molecular weight distributions and rac‐lactide in THF to give heterotactically enriched poly(rac‐lactides). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4983–4991     

Stereoselective polymerization of rac‐lactide with a bulky aluminum/Schiff base complex

An aluminum/Schiff base complex {[2,2-dimethyl-1,3-propylenebis(3,5-di-tert-butylsalicylideneiminato)](isopropanolato)aluminum(III) ( 2 )} based on a bulky ligand and aluminum isopropoxide was prepared and employed for the stereoselective ring-opening polymerization (ROP) of rac-lactide (rac-LA). The initiator was characterized with nuclear magnetic resonance (NMR), crystal structure measurements, and elemental analysis. It contained a five-coordinate aluminum atom that was trigonal bipyramidal in the solid state according to the crystal structure measurements. The two conformational stereoisomers of 2 exchanged quickly on the NMR scale. Compound 2 polymerized rac-LA into a crystalline polymer that was characterized with ¹H NMR, wide-angle X-ray diffraction, electrospray ionization mass spectrometry, and gel permeation chromatography. The kinetics of the polymerization were first-order in both the monomer and initiator, and there was a linear relationship between the rac-LA conversion and the number-average molecular weight of poly(rac-LA) with a narrow molecular distribution (1.04–1.08). These features showed that the polymerization was well controlled. The high melting temperature (196–201 °C) and isotacticity of poly(rac-LA) indicated that complex 2 was a highly stereoselective initiator for the ROP of rac-LA. The stereoselectivity was as high as 90%, and the stereoblocks of poly(rac-LA) by complex 2 contained an average of 20 units (average block length = 20) of enantiomerically pure lactic acid. The activation energy (23.6 kJ mol⁻¹) was obtained according to an Arrhenius equation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5974–5982, 2004     

Crown‐like macrocycle zinc complex derived from β‐diketone ligand for the polymerization of rac‐lactide

Enolic Schiff base zinc (II) complex 1 was synthesized. XRD revealed 1 was a novel crown‐like macrocycle structure consisted of hexanuclear units of (LZnEt)₆ via the coordination chelation between the Zn atom and adjacent amine nitrogen atom. Further reaction of 1 with one equivalent 2‐propanol at RT produced Zn‐alkoxide 2 by in situ alcoholysis. Complex 2 was used as an initiator to polymerize rac‐lactide in a controlled manner to give heterotactic enriched polylactide. Factors that influenced the polymerization such as the polymerization time and the temperature as well as the monomer concentration were discussed in detail in this paper. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 643–649, 2008     

Enolic schiff base aluminum complexes and their catalytic stereoselective polymerization of racemic lactide

A series of enolic Schiff base aluminum(III) complexes LAlR (where L=NNOO-tetradentate enolic Schiff base ligand) containing ligands that differ in their steric and electronic properties were synthesized. Their single crystals showed that these complexes are five-coordinated around the aluminum center. Their coordination geometries are between square pyramidal and trigonal bipyramidal. Their catalytic properties in the solution polymerization of racemic lactide (rac-LA) were examined. The modifications in the auxiliary ligand exhibited a dramatic influence on the catalytic performance. Lengthening the backbone from C(2) alkylene to C(3) alkylene resulted in remarkable enhancement of both the stereoselectivity and the polymerization rate because of the increasing flexibility of the diimine backbone. Electron-withdrawing substituents in the diketone also highly improved the activity and the stereoselectivity. Among these complexes, 4 b had the highest activity and the stereoselectivity owing to the C(3) alkylene backbone and the two gem-methyl groups on the middle carbon atom. The value of the polymerization rate constant (k(p)) catalyzed by 4 b in 70 degrees C was 1.90 L mol(-1) min(-1), the activation energy of the polymerization (35.4 kJ mol(-1)) was calculated according to the Arrhenius equation. Other factors that influenced the polymerization, such as the polymerization time, the temperature, and the monomer concentration, are also discussed in detail.     

Ring‐Opening and polymerization of 1‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotrisiloxane

1‐[2′‐(Heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotetrasiloxane ( II ) was prepared from 1‐[2′‐(methyldichlorosilyl)ethyl]‐1,3,3,5,5,7,7‐heptaphenylcyclotetrasiloxane ( I ) and tetramethyldisiloxane‐1,3‐diol. Acid‐catalyzed ring‐opening of II in the presence of tetramethyldisiloxane gave 1,9‐dihydrido‐5‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( III ) and 1,9‐dihydrido‐3‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( IV ). Both acid‐ and base‐catalyzed ring‐opening polymerization of II gives highly viscous, transparent polymers. The structures of I – IV and polymers were determined by UV, IR, ¹H, ¹³C, and ²⁹Si NMR spectroscopy. In addition, molecular weights obtained by GPC and NMR end group analysis were confirmed with mass spectrometry. On the basis of ²⁹Si NMR spectroscopy, the polymers appear to result exclusively from ring‐opening of the cyclotrisiloxane ring. No evidence for ring‐opening of the cyclotetrasiloxane ring was observed. Polymer properties were determined by DSC and TGA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 137–146, 2006     

Living and stereoselective polymerization of rac‐lactide by bimetallic aluminum Schiff‐Base complexes

A series of bimetallic aluminum Schiff‐base complexes have been prepared and characterized. The complexes used as catalysts were applied in the lactide polymerization to test their activities and stereoselectivities. All polymerizations are living, as evidenced by the narrow polydispersities and the good fit between calculated and found number‐average molecular weights of the isolated polymers. Isotactic enriched polylactide was obtained by using these complexes. Kinetic studies indicated that the polymerizations are both first‐ordered with respect to lactide monomer and catalyst. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1344–1352     

Homopolymerization of cyclic esters initiated by lanthanide isopropoxides supported by 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenolate) ligands

Lanthanide isopropoxides supported by carbon‐bridged bisphenolate ligands of 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenoxo) {[(EDBP)Ln(μ‐OPrⁱ)(THF)₂]₂, where Ln is Nd ( 1 ), Sm ( 2 ), or Yb ( 3 ) and THF is tetrahydrofuran} were synthesized by protic exchange reactions in high yields with Cp₃Ln compounds as raw materials, and complex 1 was structurally characterized. Complexes 1 – 3 were shown to be efficient initiators for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and 2,2‐dimethyltrimethylene carbonate (DTC). Complexes 1 – 3 could initiate the controlled polymerization of ε‐CL, and the polymerization rate was first‐order with respect to the monomer. The influence of the reaction conditions on the monomer conversion, molecular weight, and molecular weight distribution of the resultant polymers was investigated. End‐group analyses of the oligomers of ε‐CL and DTC showed that the polymerization underwent a coordination–insertion mechanism. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4409–4419, 2006     

Efficient initiators for the ring‐opening polymerization of L‐lactide: Synthesis and characterization of NNO‐tridentate Schiff‐base zinc complexes

A series of efficient catalysts, based on zinc alkoxides coordinated with NNO‐tridentate Schiff‐base ligands (L¹H‐L⁶H), for ring opening polymerization of L ‐lactide have been prepared. The reactions of diethyl zinc (ZnEt₂) with L¹H‐L⁶H yielded [(μ‐L)ZnEt]₂ ( 1a–6a ), respectively. Further reaction of compounds 1a–6a with benzyl alcohol (BnOH) produced the corresponding compounds of [LZn(μ‐OBn)]₂ ( 1b–6b), respectively. X‐ray crystal structural studies reveal that all of these compounds 1a–6a are dimeric bridging through the phenolato oxygen atoms of the Schiff‐base ligand. However, the molecular structures of 1b–6b show a dimeric character bridging through the benzylalkoxy oxygen atoms. Ring‐opening polymerization of L ‐lactide, initiated by 1b–6b , proceeds rapidly with good molecular weight control and yields polymer with a very narrow molecular weight distribution. Experimental results show that the substituents on the imine carbon of the NNO‐ligand affect the reactivity of zinc complexes dramatically. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6466–6476, 2008     

ε‐Caprolactone polymerization under air by the biocatalyst: Magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide

This study investigated the synthesis of the biocatalyst, magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide (Mg(BHT)₂) complex, and the ring‐opening polymerization (ROP) of ε‐caprolactone (CL). The complex demonstrates high catalytic activity and controllable of molecular weight for the ROP of CL in tetrahydrofuran at room temperature, even when polymerization was performed under air. Before this study, the polymerization of CL had never been performed using a magnesium catalyst under air at room temperature. Various forms of alcohols with different purposes were also used as initiators with Mg(BHT)₂. The results show that the magnesium complex acts as a perfect catalyst because of its high catalytic activity and control ability without any cytotoxicity in the polymerization of CL, making it suitable for biomedical applications. In addition, nanoparticle formation, cytotoxicity, and phototoxicity of tri‐2‐hydroxyethyl ester [Ce6‐(CH₂CH₂OPCL)₃] were also studied in this article and Ce6‐(CH₂CH₂OPCL)₃ formed nanoparticle can act as a nanophotosensitizer for photodynamic therapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Selectivity in anionic and cationic ring‐opening polymerizations of tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane

Anionic and cationic ring‐opening polymerizations of two novel cyclotrisiloxanes, tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane ( I ) and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane ( II ), are reported. Anionic ring‐opening polymerization of I or II leads to copolymers with highly regular microstructures. Copolymers obtained by cationic polymerizations of I or II , initiated by triflic acid, have less regular microstructures characteristic of chemoselective polymerization processes. The composition and microstructure of copolymers have been characterized by ¹H and ²⁹Si‐NMR, the molecular weight distributions by GPC, and the thermal properties by DSC and TGA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5235–5243, 2004     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

The antioxidant methyl 3‐(3,5‐di‐tert‐butyl‐4‐hydroxyphenyl)propionate

The title compound, C₁₈H₂₈O₃, was prepared by the reaction of 2,6‐di‐tert‐butylphenol with methyl acrylate under basic conditions using dimethyl sulfoxide as the promoter. The structure of this antioxidant indicates significant strain between the ortho tert‐butyl substituents and the phenolic OH group. In spite of the steric crowding of the OH group, it participates in intermolecular hydrogen bonding with the ester carbonyl O atom.     

Aluminum salen and salan complexes in the ring‐opening polymerization of cyclic esters: Controlled immortal and copolymerization of rac‐β‐butyrolactone and rac‐lactide

Aluminum‐based salen and salan complexes mediate the ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (β‐BL), rac‐lactide, and ε‐caprolactone. Al‐salen and Al‐salan complexes exhibit excellent control over the ROP of rac‐β‐butyrolactone, yielding atactic poly(3‐hydroxybutyrate) (PHB) with narrow PDIs of <1.15 for Al‐salen and <1.05 for Al‐salan. Kinetic studies reveal pseudo‐first‐order polymerization kinetics and a linear relationship between molecular weight and percent conversion. These complexes also mediate the immortal ROP of rac‐β‐BL and rac‐lactide, through the addition of excess benzyl alcohol of up to 50 mol eq., with excellent control observed. A novel methyl/adamantyl‐substituted Al‐salen system further improves control over the ROP of rac‐lactide and rac‐β‐BL, yielding atactic PHB and highly isotactic poly(lactic acid) (P_m = 0.88). Control over the copolymerization of rac‐lactide and rac‐β‐BL was also achieved, yielding poly(lactic acid)‐co‐poly(3‐hydroxybutyrate) with narrow PDIs of <1.10. ¹H NMR spectra of the copolymers indicate a strong bias for the insertion of rac‐lactide over rac‐β‐BL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Substituent effect of N‐aryl‐N′‐pyridyl ureas as thermal latent initiators on ring‐opening polymerization of epoxide

A series of N‐aryl‐N′‐pyridyl ureas were synthesized by the reactions of 4‐aminopyridine (4AP) with the corresponding isocyanates such as phenyl isocyanate, 4‐methylphenyl isocyanate, 4‐methoxyphenyl isocyanate, 4‐chlorophenyl isocyanate, 4‐(trifluoromethyl)phenyl isocyanate, and 4‐nitrophenyl isocyanate. Bulk polymerization of diglycidyl ether of bisphenol A (DGEBA) in the presence of the ureas as initiators was evaluated by differential scanning calorimetry (DSC) at a heating rate of 10 °C/min. The resulting DSC profiles indicated exothermic peaks above 140 °C, while the DSC profile measured for a formulation composed of DGEBA and pristine 4AP indicated an exothermic peak at around 120 °C, implying that the derivation of 4AP into the corresponding ureas is a useful strategy to achieve thermal latency. The peak top temperatures were correlated with the electron density of the aromatic ring of the ureas, that is, as the electron‐withdrawing nature of the substituent on the aromatic ring became larger, the peak increases. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2569–2574     

Controlled random copolymerization of rac‐lactide and ɛ‐caprolactone by well‐designed phenoxyimine Al complexes

The random copolymers poly(LA‐ran‐CL) have improved properties of degradability, mechanical strength, elasticity, and permeability over the PLA and PCL homopolymers. However, the synthesis of such copolymers is still a great challenge in polymer chemistry. In this contribution, we develop a simple but well‐designed phenoxyimine Al complex ( 4 ) with bulky Ph₂CH groups, which achieves controlled random copolymerization of rac‐LA and ɛ‐CL in a living manner (Ð = 1.06–1.09). The reactivity ratios of rac‐LA and ɛ‐CL (r_LA and r_CL) are 1.09 and 1.05 and the average sequence lengths of the lactidyl unit (L_LA) and the caproyl unit (L_CL) are in the range of 1.9–2.0 at different stages of conversion. In marked contrast, Al complexes ( 1–3 ) having less bulky substituents on the ligands only produce gradient copolymers. Furthermore, this strategy of catalyst design would be readily extended to other catalytic systems including β‐ketiminato Al complex ( 5 ). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 611–617     

Ring‐opening polymerization of L‐lactide by rare‐earth tris(4‐tert‐butylphenolate) single‐component initiators

The ring‐opening polymerization of L ‐lactide initiated by single‐component rare‐earth tris(4‐tert‐butylphenolate)s was conducted. The influences of the rare‐earth elements, solvents, temperature, monomer and initiator concentrations, and reaction time on the polymerization were investigated in detail. No racemization was found from 70 to 100 °C under the examined conditions. NMR and differential scanning calorimetry measurements further confirmed that the polymerization occurred without epimerization of the monomer or polymer. A kinetic study indicated that the polymerization rate was first‐order with respect to the monomer and initiator concentrations. The overall activation energy of the ring‐opening polymerization was 79.2 kJ mol^?1. ¹H NMR data showed that the L ‐lactide monomer inserted into the growing chains with acyl–oxygen bond cleavage. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6209–6215, 2004     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Substituent effects of N‐alkyl groups on thermally induced polymerization behavior of 1,3‐benzoxazines

Thermally induced polymerizations of a series of 1,3‐benzoxazines with a variety of substituents on the nitrogen atom were investigated in detail, particularly in the following three aspects of the polymerization: (1) N‐alkyl‐1,3‐benzoxazines are much more reactive than N‐phenyl‐1,3‐benzoxazine. (2) The polymerization rate depended on the bulkiness of the N‐substituent. The bulkier the substituent was, the slower the polymerization was. (3) The polymerizations accompanied weight loss due to the elimination of the corresponding imine (R‐N = CH₂), and its extent became larger when R was more bulky. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2777–2782, 2010