FT-IR and Raman spectroscopic study of hydrated rubidium (cesium) borates and alkali double borates

FT-IR and Raman spectra of five hydrated alkali borates and five hydrated alkali double borates have been recorded at room temperature in the range 400 to 4000 cm⁻¹, and analyzed. Fundamental vibrational modes have been identified and assignments tentatively made in comparison with the work of Janda and Heller, and Li Jun. The text was submitted by the authors in English.     

The Lithium Salts of Bis(azolyl)borates as Strontium- and Chlorine-free Red Pyrotechnic Colorants

After concerns regarding the use of chlorinated material for pyrotechnic items had reinforced, the action of the U.S. Environmental Protection Agency on health concerns about strontium ushered in a new era in the production of red light. Lithium was shown to impart red color to a pyrotechnic flame, however only a very narrow selection of such formulations can be found in the literature. Dihydrobis(azolyl)borates are a well investigated, easily accessible class of materials which have been proven to be suitable as pyrotechnic coloring agents. With their high nitrogen contents such moieties should also meet the requirements of a low combustion temperature and a reducing flame atmosphere for a lithium-based red-burning composition. This work evaluates the capability of the lithium salts of dihydrobis(pyrazol-1-yl)borate, dihydrobis(1,2,4-triazol-1-yl)borate, and dihydrobis(tetrazol-1-yl)borate to serve as red color imparters. The latter compounds were characterized by multinuclear NMR experiments, IR spectroscopy, elemental analysis, and single-crystal X-ray diffraction and were investigated with respect to their thermal stabilities as well as sensitivities toward various ignition stimuli.     

Synthesis and characterization of mesoporous nickel oxide for electrochemical capacitor

A mesoporous electrochemical active material NiO with face center cubic structure has been synthesized using supramolecular as template and urea as hydrolysis-controlling agent. The synthesized product was characterized physically by thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, and Brunauer–Emmett–Teller-specific surface area measurement. Electrochemical characterization was performed using cyclic voltammetry and chronopotentiometry in 6 mol/l KOH aqueous solution electrolyte. A specific capacitance of approximately 327 F/g was obtained by annealing the sample at 350 °C. To get a better understanding of the effect of supramolecular template on improving the structure property and electrochemical performance, a compared experiment was also carried out in this work.     

Structure and properties of the aluminum borates Al(BO2)n and Al(BO2)n(-), (n = 1-4)

The geometrical and electronic structures of Al(BO(2))(n) and Al(BO(2))(n)(-) (n = 1-4) clusters are computed at different levels of theory including density functional theory (DFT), hybrid DFT, double-hybrid DFT, and second-order perturbation theory. All aluminum borates are found to be quite stable toward the BO(2) and BO(2)(-) loss in the neutral and anion series, respectively. Al(BO(2))(4) belongs to the class of hyperhalogens composed of smaller superhalogens, and should possess a large adiabatic electron affinity (EA(ad)) larger than that of its superhalogen building block BO(2). Indeed, the aluminum tetraborate possesses the EA(ad) of 5.6 eV, which, however, is smaller than the EA(ad) of 7.8 eV of the AlF(4) supehalogen despite BO(2) is more electronegative than F. The EA(ad) decrease in Al(BO(2))(4) is due to the higher thermodynamic stability of Al(BO(2))(4) compared to that of AlF(4). Because of its high EA and thermodynamic stability, Al(BO(2))(4) should be capable of forming salts with electropositive counter ions. We optimized KAl(BO(2))(4) as corresponding to a unit cell of a hypothetical KAl(BO(2))(4) salt and found that specific energy and energy density of such a salt are competitive with those of trinitrotoluol (TNT).     

Energy Storage Materials Synthesized from Ionic Liquids

The advent of ionic liquids (ILs) as eco‐friendly and promising reaction media has opened new frontiers in the field of electrochemical energy storage. Beyond their use as electrolyte components in batteries and supercapacitors, ILs have unique properties that make them suitable as functional advanced materials, media for materials production, and components for preparing highly engineered functional products. Aiming at offering an in‐depth review on the newly emerging IL‐based green synthesis processes of energy storage materials, this Review provides an overview of the role of ILs in the synthesis of materials for batteries, supercapacitors, and green electrode processing. It is expected that this Review will assess the status quo of the research field and thereby stimulate new thoughts and ideas on the emerging challenges and opportunities of IL‐based syntheses of energy materials.     

Progress on predicting the electrochemical stability window of electrolytes

The advancement of novel electrical energy storage systems with high energy density encourages the development of electrolytes with wide electrochemical stability windows (ESWs). For the design of electrolytes, atomistic simulations have been used to investigate their electrochemical stability, providing a fast and economical approach for electrolytes screening, in which the simulation models are the key to predicting the electrolyte ESWs. Herein, the completing progress of the simulation models on predicting electrolyte ESWs is overviewed, which ranges in complexity from an isolated molecule/ion model to a solvation model and finally to a complex model of the electrode–electrolyte interface. We highlight the limitation and applicability of these models in detail and advocate a perspective of possible future research on the prediction of the electrolyte ESWs.     

Synthesis of Bis(pentafluoroethyl)germanes

The chemistry of bis(pentafluoroethyl)germanes (C₂F₅)₂GeX₂ is presented. The synthesis of such species requires Br₂GePh₂, wherein the phenyl substituents function as suitable protecting groups. After treatment with two equivalents of LiC₂F₅, (C₂F₅)₂GePh₂ is produced. The replacement of the phenyl rings is smoothly effected by gaseous HBr or HCl in the presence of a Lewis acidic catalyst. The trigermoxane [(C₂F₅)₂GeO]₃ results from the reaction of (C₂F₅)₂GeBr₂ with Ag₂CO₃. Its crystalline 1,10‐phenanthroline adduct was fully characterised by X‐ray diffraction. The combination of (C₂F₅)₂GeBr₂ with Bu₃SnH gave rise to the formation of (C₂F₅)₂GeH₂.     

Investigation of Bis(Perfluoro-tert-Butoxy) Halogenates(I/III)

A systematic study of halogenate(I/III) anions with polyatomic ligands is presented. The bis(perfluoro-tert-butoxy) halogenates(I) [X(OC₄F₉)₂]⁻, X=Cl, Br, I, of chlorine, bromine, and iodine are prepared as their tetraethylammonium salts and characterized with IR, Raman, and NMR spectroscopic methods, as well as single-crystal X-ray diffraction analyses. Spectroscopical data are supported by quantum-chemical calculations. Additionally, the bonding situation of the species in question are analyzed and discussed. Furthermore, the oxidation to the corresponding halogenate(III) derivatives was studied. For [Br(OC₄F₉)₂]⁻, oxidation with elemental fluorine gave [BrF₂(OC₄F₉)₂]⁻. Iodide was directly oxidized by ClOC₄F₉ to the I^III species [I(OC₄F₉)₄]⁻, which is a surprisingly inert anion that might be used as a weakly coordinating anion (WCA) in the future. For [Cl(OC₄F₉)₂]⁻, the decomposition products of the synthetic approaches towards a chlorine(III) system were analyzed.     

Functionalization of some benzylthioarylboronic acids by benzylic lithiation of their N‐butyldiethanolamine esters or lithium (triisopropoxy)borates

The reaction of benzylthioarylboronic acids protected as N‐butyldiethanolamine esters or as triisopropoxyborates with organolithium bases or lithium diisopropylamide (LDA) has been investigated. The benzylic lithiation occurs selectively using LDA at − 68 °C. The stability of the resultant borio‐lithio intermediates is strongly influenced by the position of the boron atom in the phenyl ring. The reaction with various electrophiles affords new arylboronic acids substituted in the benzylic position. Copyright © 2011 John Wiley & Sons, Ltd.     

Ternary core-shell structured transition metal chalcogenide for hybrid electrochemical capacitor

Herein we report a novel CoMo₂S₄@Zn-Co-S core-shell structure as the electrode materials for asymmetric supercapacitor. The as-synthesized core-shell structured electrode exhibits an overall improved electrochemical performance     

The Bis(pentafluoroethyl)phosphinous Acid (C2F5)2POH

Phosphinous acid or phosphane oxide? Both tautomers of (C₂F₅)₂POH (see picture) are found in the neat liquid, whereas only phosphinous acid is present in the gas phase or in solution. The synthesis starting from (C₂F₅)₃PF₂, the thermodynamics of the tautomerization, and the detection and thermodynamics of the cis‐/trans‐P? OH rotamers of the acid are described.

     

Synthesis of Bis(2,2-benzimidazolyl)dibenzo-18-crown-6

A method has been developed for the introduction of benzimidazole substituents into the dibenzo-18-crown-6 molecule by condensation of its 4′,4″(5″)-diacetyl derivative with ortho-phenylenediamine. Increasing the length of the hydrocarbon chain of the acyl substituent or replacing Ac by CSNH₂ led to a decrease in the yield of the desired product. No product was formed when Ac was replaced by COOH or CN. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, 1388–1390, September, 2005.     

Trifluorosulfonylation Cascade in Allenols: Stereocontrolled Synthesis of Bis(triflyl)enones

Herein, we report investigations embodying the first example of reversal of the native regioselectivity in the reaction of allenols with electrophiles. The effortlessness of C−C bond formation, mild reaction conditions, neither catalysts nor light irradiation, and exquisite selectivity, both in terms of functional-group tolerance and chemo-, site-, and stereo-selectivity, converts this trifluorosulfonylation-rearrangement sequence into an appealing protocol for the preparation of novel functionalized enones. The synthetic utility of this method has been validated by the conversion of the initially prepared bis(triflyl)enones into a variety of bis(triflyl)-functionalized molecules such as 1,3-dienes, allylic alcohols, pyrroles, pyrazoles, and chromenes. Besides, DFT calculations have provided a reliable understanding of observed selectivity.     

A facile approach to the preparation of loose-packed Ni(OH)2 nanoflake materials for electrochemical capacitors

Loose-packed nickel hydroxides were successfully synthesized by a facile chemical precipitation method. Structure characterizations indicate that a nanoflake structure with low crystallinity for the nickel hydroxide samples was obtained. Electrochemical studies were carried out using cyclic voltammetry, chronopotentiometry technology, and alternating current impedance spectroscopy, respectively. A maximum specific capacitance of 2,055F/g could be achieved in 2M aqueous KOH with the potential range of 0 to 0.4V (vs. the saturated calomel electrode) in a half-cell setup configuration for the nanoflake Ni(OH)₂ electrode, suggesting its potential application in the electrode material for electrochemical capacitors. Furthermore, the effect of annealing temperatures on the electrochemical capacitance characteristics has also been systemically explored.