L-矩阵的多参数预条件AOR迭代法

最近王广彬等人讨论了在预条件因子P=I+S′作用下的预条件AOR方法,推广了他们的预条件因子,提出了一个多参数的预条件因子P_α=I+S_α,并建立了新的预条件AOR迭代法与经典的AOR迭代法的比较定理.     

一类预条件AOR迭代法的收敛性分析

本文研究了线性方程组Ax=b的预条件迭代法.利用新的待定参数加速预条件子的方法,获得了一种带参数的新预条件迭代法,并对参数的选择给出必要条件,证明了对于非奇异不可约M-矩阵,新预条件方法收敛且可以加速AOR迭代法的收敛速度,数值例子表明新预条件方法是有效的,推广了已有文献中的有关结果.     

一种有效的新预条件方法

该文首先提出一种有效的新预条件方法,并讨论了这种新预条件的几个重要性质;其次,证明了对于不可约严格对角占优的 Z -矩阵,新的预条件方法可以加速Jacobi迭代和Gauss-Seidel迭代法的收敛速度,并对相应迭代矩阵的谱半径做了比较,推广了已有的相关结论.文中的数值例子说明了该文提出的新预条件方法是有效的.     

一类预条件AOR迭代法及其收敛性

给出了一类预条件的AOR迭代法及其收敛性,并给出了松驰因子ω与加速因子γ的选取对收敛速度的影响,同时通过数值实例验证了主要结果.     

H-矩阵方程组的预条件迭代法

A．D．Gunawardena等1991年提出的预条件矩阵为I S的预条件Gauss-Seidel方法的收敛率优于基本的迭代法．本文引入了预条件矩阵I Sαβ．证明了若系数矩阵A为H-矩阵,则[I Sαβ]A仍是H-矩阵．     

位移方程组的渐近不完全分解预条件处理

讨论位移方程组(A α_jI)x(α_j)=b(α_j,x(α_i)),(i相似文献   

求解2×2块对称不定线性方程组迭代法的收敛性分析(英文)

本文研究求解系数矩阵为2×2块对称不定矩阵时的线性方程组,提出了一种新的分裂迭代法,并通过研究迭代矩阵的谱半径,详细讨论了新方法的收敛性.最后,我们也讨论了预条件矩阵特征根的几条性质.     

一种求解加权Toeplitz最小二乘问题的新预条件子（英文）

本文研究加权Toeplitz最小二乘问题的快速求解算法.首先,在增广线性系统的基础上,设计了一种用于求解此类线性系统的新型简单预条件子.其次,研究了迭代法的收敛性,并证明了预条件矩阵的所有特征值均是实数且非单位特征值位于某正区间.再次,研究了预条件矩阵的特征向量分布和最小多项式的维数.最后,相关数值实验表明新型预条件子比一些已有的预条件子更有效.     

Z-矩阵的预条件方法

通过对方程组Ax=b的系数矩阵施行初等行变换，该文提出了解线性方程组Ax=b的一种新的预条件Gauss Seidel迭代方法，理论上证明了新的预条件Gauss Seidel迭代方法较经典的Gauss Seidel迭代法收敛速度快. 该文提出的新预条件方法推广了文［1-2］中提出的预条件方法，具体的数值例子说明了新预条件方法的有效性.     

块AOR迭代法的收敛性

本文推广了解线性方程组的AOR迭代法,给出了块AOR迭代法(BAOR迭代法).文中引进了块M-矩阵,块H-矩阵,块严格对角优势矩阵,块Hermite正定矩阵,块相容次序矩阵和广义块相容次序矩阵等概念.在线性方程组的系数矩阵分别具有上述性质的假设下,讨论了BAOR迭代法的敛散性.     

Fast formula of a reliability ofm-consecutive-k-out-of-n:F system with cyclek

Anm-consecutive-k-out-of-n:F system is a system ofn linearly arranged components which fails if and only if at leastm non-overlapping sequences ofk components fail, when there arek distinct components with failure probabilitiesq _i fori=1,...,k and where the failure probability of thej-th component (j=rk+i (1 ≤i ≤k) isq _j =q _i , we call this system by anm-consecutive-k-out-of-n:F system with cycle (or period)k. In this paper we give a formula of the failure probability ofm-consecutive-k-out-of-n:F system with cyclek via the failure probability of consecutive-k-out-of-n:F system.     

Exact Convergence Rate for the Distributions of GI/M/c/K Queue as K Tends to Infinity

We obtain the exact convergence rate of the stationary distribution ^(K) of the embedded Markov chain in GI/M/c/K queue to the stationary distribution of the embedded Markov chain in GI/M/c queue as K. Similar result for the time-stationary distributions of queue size is also included. These generalize Choi and Kim's results of the case c=1 by nontrivial ways. Our results also strengthen the Simonot's results [5].     

An existence result for a quadrature surface free boundary problem

The aim of this paper is to present two different approachs in order to obtain an existence result to the so-called quadrature surface free boundary problem. The first one requires the shape derivative calculus while the second one depends strongly on the compatibility condition of the Neumann problem. A necessary and sufficient condition of existences is given in the radial case.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

A unified theory of R-continuity

We introduce and investigate R-M-continuous functions defined between sets satisfying some minimal conditions. The functions enable us to formulate a unified theory of modifications of R-continuity [22]: R-irresoluteness [6], R-preirresoluteness [7].      

Congruences,ideals and annihilators in standard QBCC-algebras

We characterize congruence lattices of standard QBCC-algebras and their connection with the congruence lattices of congruence kernels. Work on the paper was supported by Council of Czech Government No J14/98:153100011.     

Physicomechanical characteristics of a disperse-filled polytetrafluoroethylene

Composite polymer materials based on PTFE containing ultradisperse -sialon (1–10 wt.%) as the cross-linking agent are studied. It is shown that the injection of small amounts of fillers (1–2 wt.%) increases the degree of composite crystallinity. A correlation between the structure, element distribution on the surface layers of samples, and tribotechnical characteristics of composites is found. The change in the physicomechanical characteristics is associated with the effect of the interstructural plasticization.Ammosov Yakutsk State University, Yakutsk, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 797–806, November–December, 1999.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

The minimizing of the Nielsen root classes

Given a map f: X→Y and a Nielsen root class, there is a number associated to this root class, which is the minimal number of points among all root classes which are H-related to the given one for all homotopies H of the map f. We show that for maps between closed surfaces it is possible to deform f such that all the Nielsen root classes have cardinality equal to the minimal number if and only if either N R[f]≤1, or N R[f]>1 and f satisfies the Wecken property. Here N R[f] denotes the Nielsen root number. The condition “f satisfies the Wecken property is known to be equivalent to |deg(f)|≤N R[f]/(1−χ(M ₂)−χ(M ₁0/(1−χ(M ₂)) for maps between closed orientable surfaces. In the case of nonorientable surfaces the condition is A(f)≤N R[f]/(1−χ(M ₂)−χ(M ₂)/(1−χ(M ₂)). Also we construct, for each integer n≥3, an example of a map f: K _n →N from an n-dimensionally connected complex of dimension n to an n-dimensional manifold such that we cannot deform f in a way that all the Nielsen root classes reach the minimal number of points at the same time.     

Representation of Hilbert algebras and implicative semilattices

In this paper we shall give a topological representation for Hilbert algebras that extend the topological representation given by A. Diego in [4]. For implicative semilattices this representation gives a full duality. We shall also consider the representation for Boolean ring.