混响声场条件下水声互易传递函数的测量及应用

对不规则的混响声场情况的互易测量方法进行了理论研究,对相关测量误差提出了修正方法。通过测量结果的空间平均和混响环境对声能密度影响的评估,修正了声源体积速度的计算值,并在水中进行了试验验证。经修正后的互易测量结果与正向实测结果基本一致。表明混响声场不影响互易原理有效性的成立,但影响了声源体积速度的计算,进而影响了应用互易原理对传递函数的测量。提出的修正方法在不规则的混响声场情况下简单有效,结论为今后基于互易原理的工程应用提供了参考和依据。      

A modified electro-acoustical reciprocity method for measuring low-frequency sound source in arbitrary surroundings

The reciprocity principle provides a possible means of measuring the low-frequency volume velocity of a sound source in arbitrary surroundings; however, the auxiliary transducer in the reciprocity experiment is required to be absolutely reciprocal, which means that the radiation property and the receiving property of the transducer are identical. However, it is not always easy to obtain such a low-frequency reciprocal transducer, because some issues like nonlinearity would lead the transducer to be non-reciprocal. In this study, a modified method is proposed to conduct the reciprocity measurement using an ordinary loudspeaker instead of a strictly reciprocal one as the auxiliary transducer. Firstly, the relationship is established between the measurement error and the inconsistency of auxiliary loudspeaker’s radiation property and receiving property. Furthermore, a modified reciprocity method is proposed to compensate the inconsistency. Finally, experiments are carried out with the modified reciprocity method in both an anechoic room and a reverberation room with two different auxiliary loudspeakers. The experimental results of the modified reciprocity method agree with the results obtained with the free field method very well.     

基于等效源法和双面质点振速测量的声场分离方法

目前基于等效源法的声场分离方法有两种输入方式, 一种以双测量面上的声压为输入, 另一种以单测量面上的声压和质点振速为输入. 本文以双测量面上的质点振速为输入, 提出一种新的基于等效源法的声场分离方法. 首先给出了该方法的理论推导, 然后通过数值仿真和实验验证了该方法的有效性. 通过与基于双面声压测量的声场分离方法的比较, 证明了该方法在分离质点振速方面的优越性. 此外, 在仿真中还研究了干扰声源强度和测量面间距对分离精度的影响. 关键词： 声场分离 质点振速测量 等效源法 近场声全息     

Research on intensity measurement in room impulse field

A new system of sound intensity measurement for impulse field in the room was proposed. This measurement system consists of a repeatable inspiriting sound source and a microphone fixed on a slowly rotating platform, which is equivalent to a circle microphone array composed of many perfectly matched microphones. The test principle was presented and typical application was described. Based upon this system the sound intensity measurement for impulse field in the room was realized. Therefore, not only time but also spatial information of room impulse response can be obtained.     

Corrected Statistical Energy Analysis Model in a Non-Reverberant Acoustic Space

Statistical Energy Analysis (SEA) is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on. A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at first reflection. Measurement was conducted in a box divided into two rooms separated by a partition with an opening where the condition of reverberant and non-reverberant can conveniently be controlled. In the case of a non-reverberant space where acoustic material was installed inside the wall of the experimental box, the signals are corrected by eliminating the direct field component in the measured impulse response. Using the corrected SEA model, comparison of the coupling loss factor (CLF) and damping loss factor (DLF) with the theory shows good agreement.     

波场合成中声像感知距离重建

声像距离是声像位置的重要信息,为了完整地描述重建声场中感知声像位置,需在虚拟声场中重建出声像距离。本文基于人耳对距离的感知机理,将镜像法引入波场合成技术中,通过模拟反射声来控制感知声像距离。基于"比较判断律"的主观测听实验表明:通过模拟房间反射声受试者更明显地感受到声像距离的变化,并且变化规律与人耳对距离的感知机理相符合。因此在基于波场合成的声重放系统中,通过模拟反射声和有效地控制反射声能量可以准确地重建出声像距离。      

A Sound Field Separation and Reconstruction Technique Based on Reciprocity Theorem and Fourier Transform

We show a method to separate the sound field radiated by a signal source from the sound field radiated by noise sources and to reconstruct the sound field radiated by the signal source. The proposed method is based on reciprocity theorem and the Fourier transform. Both the sound field and its gradient on a measurement surface are needed in the method. Evanescent waves are considered in the method, which ensures a high resolution reconstruction in the near field region of the signal source when evanescent waves can be measured. A simulation is given to verify the method and the influence of measurement noise on the method is discussed.     

基于声压场描述的扩散声场多自由度互易原理研究

应用于复杂结构中频声振分析的扩散场多自由度互易原理采用位移变量描述系统,实质为弹性波场互易原理,应用于声波场时会造成模型自由度数不必要的增加。建立基于声压描述的扩散声场受挡模型,利用声辐射模态描述扩散声场中结构的表面受挡声压;据此提出基于声压描述的扩散声场多自由度互易原理,发现扩散声场中结构表面受挡声压的互谱矩阵与该结构在自由空间中振动辐射声波的声阻矩阵成正比。该互易原理与传统的单自由度互易原理表达形式相似,但适用于任意自由度结构。该互易原理可用于扩散声场中复杂结构的表面受挡声压的自谱及相关分析,仿真研究表明当边界元网格尺寸小于声波波长的1/6(线性单元)或1/3(二次单元)时,数值解与理论解完全吻合。      

体积速度匹配分布源边界点法的特解源位置优化方法研究

在分布源边界点法中,选择特解源及特解源位置对声场计算的精度具有很大的影响。为减小声场计算的误差,提出了一种确定特解源位置的优化方法。在该方法中,采用三极子作为特解源,以1%体积速度相对误差对结构声辐射计算的上限频率进行预测,然后在计算上限频率范围内通过体积速度匹配搜索,得到体积速度相对误差最小意义下的特解源优化位置,在该优化位置处构造声压与表面体积速度之间的传递矩阵来计算声场,以减小计算误差。数值仿真结果表明:在求取的计算上限频率范围内,特解源处于优化位置时,计算误差得以显著减小。当振速测量存在一定误差时,采用该方法仍可将计算误差控制在5%以内。      

Position optimization of particular solution sources for distributed source boundary point method by volume velocity-matching

Choosing particular solution source and its position have great influence on accuracy of sound field prediction in distributed source boundary point method.An optimization method for determining the position of particular solution sources is proposed to get high accuracy prediction result.In this method,tripole is chosen as the particular solution.The upper limit frequency of calculation is predicted by setting 1%volume velocity relative error limit using vibration velocity of structure surface.Then,the optimal position of particular solution sources,in which the relative error of volume velocity is minimum,is determined within the range of upper limit frequency by searching algorithm using volume velocity matching.The transfer matrix between pressure and surface volume velocity is constructed in the optimal position.After that,the sound radiation of structure is calculated by the matrix.The results of numerical simulation show that the calculation error is significantly reduced by the proposed method.When there are vibration velocity measurement errors,the calculation errors can be controlled within 5% by the method.     

On the possibility of applying the reciprocity principle in the vector-scalar fields of mutipole sources in a waveguide

We study the applicability of the reciprocity principles in an underwater waveguide for the vector-scalar fields of multipole sources. We show analytically and numerically that multipole sources are divided into two groups according to this principle: in the first group, the sound pressure field and the horizontal projections of the vibration velocity vectors satisfy the reciprocity principle, while the vertical projections of these vectors do not. In the second group, the pressure and the horizontal projections of the vibration velocity vector do not satisfy the reciprocity principle, while their vertical projections do. We establish that the phase gradients and angles of arrival of signals in the vertical plane do not satisfy the reciprocity principle for the vector-scalar fields of volumetric sources with arbitrary directivity in the vertical plane.     

吸顶式传声器阵列阵元坐标标定方法

提出了一种吸顶式传声器阵列阵元坐标的标定方法。针对在混响声场中,时延估计算法性能严重下降从而导致在标定传声器阵元坐标时产生较大误差的问题,提出了利用脉冲声源作为标定声源,并且截取脉冲源直达声的方法来抑制混响声场的影响,提高传声器阵元坐标标定的精度。建立了阵元坐标标定的误差分析模型,并以白噪声和脉冲声源作为标定声源进行数据仿真和对比分析。仿真结果表明,使用脉冲声源作为标定声源能有效地抑制混响声场的影响,获得传声器阵列阵元的准确坐标。同时,在封闭的房间内建立起孔径为3.5 m、64阵元的螺旋状吸顶传声器阵列进行了实验研究,实验结果验证了本文提出方法的有效性。      

一种预测扩散声场在非规则形状刚性壁面附近干涉图样的方法

扩散声场会在反射边界附近形成干涉图样,研究方法包括平面波模型、简正模态分析、渐进模态分析等,但仅适用于尺度远大于声波波长的矩形声腔。提出一种预测扩散声场在非规则刚性壁面结构附近形成的干涉图样的数值方法,表明结构附近“受挡”声压的互谱矩阵取决于:(1)假定该结构在自由空间中振动辐射声音时其表面法向振速到表面及场点声压的边界元系数矩阵;(2)假定结构置于自由空间中且表面刚性时,点声源辐射声波入射到结构表面上产生的散射声场的边界元系数矩阵;(3)扩散声场均方声压。仿真表明,该途径预测的干涉图样与理论值完全吻合。该预测方法还可用于混响环境下声源附近直达声压均方值的空间分布估计,为混响环境下设备的声源定位提供帮助。      

A hybrid approach to reconstruct transient sound field based on the free-field time reversal method and interpolated time-domain equivalent source method

A hybrid approach is presented in the current work, which reconstructs the transient sound field radiated from the two-dimensional sources with unknown locations and sizes, by combining the free-field time reversal method and the interpolated time-domain equivalent source method (TDESM). In the first step of the proposed method, the time reversal focusing algorithm is performed to estimate the source locations on the source plane. And then, the interpolated TDESM is applied to reconstruct the transient sound field on the reconstruction plane by assuming that the equivalent sources are located near the estimated source locations found in the previous step. The proposed technique, in principle, requires fewer microphones in the measurement since the equivalent sources are only placed in the vicinity of the ‘real’ sound sources. Reconstruction of the transient sound field radiated from the dual-planar-piston model is studied by numerical simulation for feasibility demonstration. A measurement of the sound fields radiated from two baffled loudspeakers is performed in the anechoic chamber, which shows that a better reconstruction result can be achieved by using the proposed hybrid scheme than the original interpolated TDESM with relatively the same number of sampling channels.     

海洋波导中目标声辐射场的计算方法

针对海洋波导中目标声辐射场的计算问题,提出了一种基于波叠加法并在近、远场采用不同水声传播模型的建模方法,可以将近、远场作为一个统一的系统进行高效地分析。该方法通过给定的已知表面振动速度的结构计算出目标内部虚拟点声源的源强,再配合在相应的水声环境中点声源传播模型的Green函数计算出结构外的声辐射场。以Green函数为纽带,在求源强和计算近场声辐射场时采用镜像虚源法,而在计算远场声辐射场时采用简正波法。通过该方法得到的有限水深波导中声速剖面为正梯度、负梯度、负跃层的3种情况下的脉动球、刚体摆动球的声辐射场计算结果与COMSOL的有限元计算结果进行对比,结果表明了该方法在提高计算效率的同时保证了计算精度。      

The coherence of reverberant sound fields

A new method of measuring spatial correlation functions in reverberant sound fields is presented. It is shown that coherence functions determined with appropriate spectral resolution contain the same information as the corresponding correlation functions, and that measuring such coherence functions is a far more efficient way of obtaining this information. The technique is then used to verify theoretical predictions of the spatial correlation between various components of the particle velocity in a diffuse sound field. Other possible applications of the technique are discussed and illustrated with experimental results obtained in an ordinary room.     

Acoustic characteristics of a heavy duty vehicle cooling module

Studies dedicated to the determination of acoustic characteristics of an automotive cooling package are presented. A shrouded subsonic axial fan is mounted in a wall separating an anechoic- and a reverberation room. This enables a unique separation of the up- and downstream sound fields. Microphone measurements were acquired of the radiated sound as a function of rotational speed, fan type and components included in the cooling module. The aim of the present work is to investigate the effect of a closely mounted radiator upstream of the impeller on the SPL spectral distribution. Upon examination of the SPL spectral shape, features linked specifically to the source and system are revealed. The properties of a reverberant sound field combined with the method of spectral decomposition permit an estimation of the source spectral distribution and the acoustic transfer response, respectively. Additionally, purely intrinsic acoustic properties of the radiator are scrutinized by standardized ISO methods. A new methodology comprising a dipole sound source is adopted to circumvent limitation of transmission loss measurement in the low frequency range. The sound attenuation caused by the radiator alone was found to be negligible.     

The identification of tyre induced vehicle interior noise

Sound transmission into a vehicle is classified as either airborne or structure borne sound. From the point view of noise control, the reduction of noise transferred by different paths requires different solutions. Coherence function analysis is often used to identify transmission paths. However it can be difficult to separate the airborne from structure borne components. The principle of acoustic reciprocity offers a convenient method for overcoming this difficulty. The principal states that the transfer function between an acoustic volume velocity source and an acoustic receiver is independent of a reversal of the position of source and receiver. The work done on this study involves exciting a stationary tyre and measuring the surface velocity of the tyre at a number of discrete points. The acoustic transfer functions between each point on the tyre and a receiver point are measured reciprocally. Two sets of measurements are then combined to yield a measure of the sound pressure due to a point force on the tyre via the acoustic transmission path only. This technique also provides information on the relative contributions of various regions of the tyre wall to the resultant noise. Also the sound radiation characteristics, the horn effect, and resonance at the wheel housing are identified through the reciprocal measurement.     

基于声能密度模型的中高频复杂声场预报方法

提出并推导了一种基于声能密度分布方程的声场预报方法。在能量和功率流的本构关系基础上建立声能密度平衡方程。应用直达声场和反射混响声场的叠加原理和边界面散射模型,建立了面向中高频复杂声场细节预报的数值计算方法。通过有限元计算结果在一个简单声场模型上对此方法做了验证,对比结果显示了声能密度法预报有可靠的精度和准确度。