A glucosamine-dipicolylamine conjugate of 99mTc(I) and 186Re(I) for use in imaging and therapy

The synthesis and metal complexation of a glucosamine-appended 2,2'-dipicolylamine ligand to the tricarbonyls of 99mTc and 186Re is described; the ligand was found to bind in a tridentate fashion with the glucosamine function remaining pendant, and the 99mTc complex was found to exhibit exceptional stability towards in vitro ligand exchange experiments.     

Thiol- and thioether-based bifunctional chelates for the {M(CO)3}+ core (M = Tc, Re)

By analogy to the recently described single amino acid chelate (SAAC) technology for complexation of the {M(CO)3}+ core (M = Tc, Re), a series of tridentate ligands containing thiolate and thioether groups, as well as amino and pyridyl nitrogen donors, have been prepared: (NC5H4CH2)2NCH2CH2SEt (L1); (NC5H4CH2)2NCH2CH2SH (L2); NC5H4CH2N(CH2CH2SH)2 (L3); (NC5H4CH2)N(CH2CH2SH)(CH2CO2R) [R = H (L4); R = -C2H5 (L5). The {Re(CO)3}+ core complexes of L1-L5 were prepared by the reaction of [Re(CO)3(H2O)3]Br or [NEt4]2[Re(CO)3Br3] with the appropriate ligand in methanol and characterized by infrared spectroscopy, 1H and 13C NMR spectroscopy, mass spectrometry, and in the case of [Re(CO)3(L2)] (Re-2) and [Re(CO)3(L1)Re(CO)3Br2] (Re-1a) by X-ray crystallography. The structure of Re-2 consists of discrete neutral monomers with a fac-Re(CO)3 coordination unit and the remaining coordination sites occupied by the amine, pyridyl, and thiolate donors of L2, leaving a pendant pyridyl arm. In contrast, the structure of Re-1a consists of discrete binuclear units, constructed from a {Re(CO)3(L1)}+ subunit linked to a {Re(CO)3Br2}- group through the sulfur donor of the pendant thioether arm. The series of complexes establishes that thiolate donors are effective ligands for the {M(CO)3}+ core and that a qualitative ordering of the coordination preferences of the core may be proposed: pyridyl nitrogen approximately thiolate > carboxylate > thioether sulfur > thiophene sulfur. The ligands L1 and L2 react cleanly with [99mTc(CO)3(H2O)3]+ in H2O/DMSO to give [99mTc(CO)3(L1)]+ (99m)Tc-1) and [99mTc(CO)3(L2)] (99mTc-2), respectively, in ca. 90% yield after HPLC purification. The Tc analogues 99mTc-1 and 99mTc-2 were subjected to ligand challenges by incubating each in the presence of 1000-fold excesses of both cysteine and histidine. The radiochromatograms showed greater than 95% recovery of the complexes.     

Synthesis of Bis{1,2,4-tri(tert-butyl)cyclopentadienyl}mercury by Transfer of Alkylated Cyclopentadienyl Rings from Bismuth to Mercury (Transmetallation)

Bis{1,2,4-tri(tert-butyl)cyclopentadienyl}mercury 2 has been obtained by sodium amalgam reduction of Chlorobis{1,2,4-tri(tert-butyl)cyclopentadienyl}bismuth. The crystal structure of 2 (P1 , a = 10.564(4) Å, b = 11.8230(10) Å, c = 15.546(4) Å, α = 69.160(10)°, β = 82.49(2)°, γ = 64.100(10)°, V = 1 631.7(8) ų) consists of a linear two-coordinated mercury complex with σ bonded tri(tert-butyl)cyclopentadienyl rings. In solution 2 is fluxional on the NMR time scale even at 165 K.     

Synthesis, structure, and properties of an Fe(II) carbonyl [(PaPy3)Fe(CO)](ClO4): insight into the reactivity of Fe(II)-CO and Fe(II)-NO moieties in non-heme iron chelates of N-donor ligands

An Fe(II) carbonyl complex [(PaPy3)Fe(CO)](ClO4) (1) of the pentadentate ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide (PaPy3H, H is the dissociable amide proton) has been synthesized and structurally characterized. This Fe(II) carbonyl exhibits its nu(CO) at 1972 cm(-1), and its 1H NMR spectrum in degassed CD3CN confirms its S = 0 ground state. The bound CO in 1 is not photolabile. Reaction of 1 with an equimolar amount of NO results in the formation of the {Fe-NO}7 nitrosyl [(PaPy3)Fe(NO)](ClO4) (2), while excess NO affords the iron(III) nitro complex [(PaPy3)Fe(NO2)](ClO4) (5). In the presence of [Fe(Cp)2]+ and excess NO, 1 forms the {Fe-NO}6 nitrosyl [(PaPy3)Fe(NO)](ClO4)2 (3). Complex 1 also reacts with dioxygen to afford the iron(III) mu-oxo species [{(PaPy3)Fe}2O](ClO4)2 (4). Comparison of the metric and spectral parameters of 1 with those of the previously reported {Fe-NO}6,7 nitrosyls 3 and 2 provides insight into the electronic distributions in the Fe(II)-CO, Fe(II)-NO, and Fe(II)-NO+ bonds in the isostructural series of complexes 1-3 derived from a non-heme polypyridine ligand with one carboxamide group.     

meso‐Bis{η5‐1‐[1‐(dimethylamino)ethenyl]‐3‐(trimethylsilyl)cyclopentadienyl}iron(II) and the cobalt(II) analogue

The two title crystalline compounds, viz.meso‐bis{η⁵‐1‐[1‐(dimethylamino)ethenyl]‐3‐(trimethylsilyl)cyclopentadienyl}iron(II), [Fe(C₁₂H₂₀NSi)₂], (II), and meso‐bis{η⁵‐1‐[1‐(dimethylamino)ethenyl]‐3‐(trimethylsilyl)cyclopentadienyl}cobalt(II), [Co(C₁₂H₂₀NSi)₂], (III), were obtained by the reaction of lithium 1‐[1‐(dimethylamino)ethenyl]‐3‐(trimethylsilyl)cyclopentadienide with FeCl₂ and CoCl₂, respectively. For (II), the trimethylsilyl‐ and dimethylaminoethenyl‐substituted cyclopentadienyl (Cp) rings present a nearly eclipsed conformation, and the two pairs of trimethylsilyl and dimethylaminoethenyl substituents on the Cp rings are arranged in an interlocked fashion. In the case of (III), the same substituted Cp rings are perfectly staggered leading to a crystallographically centrosymmetric molecular structure, and the two trimethylsilyl and two dimethylaminoethenyl substituents are oriented in opposite directions, respectively, with the trimethylsilyl group of one Cp ring and the dimethylaminoethenyl group of the other Cp ring arranged more closely than in (II).     

三羰基锝配体基苯基甲磺酰胺的合成与表征

以2-氨基-5-硝基苯酚为原料经过酚羟基烷基化、氨基甲磺酰化、硝基还原为氨基后,进行溴乙酰化以及N-烷基化5步反应制得了三羰基锝标记配体基：N-[2-环己基甲氧基-4(1-(2,2′-二吡啶甲基)胺基)乙酰胺基]苯基甲磺酰胺(NSC-PA),并对反应条件进行了优化。 中间体及目标化合物经红外、质谱和核磁共振氢谱进行了结构表征,HPLC法测定最终产物的纯度大于98%。 该目标化合物可以作为三羰基锝标记前体,为进一步开发乳腺癌显像药物奠定了基础。     

A hydrogen-1 nuclear magnetic resonance,mass spectral and extended Hückel study of some olefin complexes of rhodium(I) and iridium(I) and the crystal and molecular structure of η4-2,4-dimethylpenta-1,4-diene(η5-formylcyclopentadienyl)rhodium(I)

A ¹H NMR study of monosubstituted η-cyclopentadienyl-rhodium(I) complexes of type LLRh(C₅H₄X) and -iridium(I) complexes of type L₂Ir(C₅H₄X) (L = ethene, LL = 1,3- or 1,5-diolefin; X = C(C₆H₅)₃, CHO, or COOCH₃) has been carried out. For complexes of both metals in which the neutral ligand is ethene or a non-conjugated diolefin the NMR spectra of the cyclopentadienyl protons are unusual in that H(2), H(5) resonate to high field either at room temperature or below.The corresponding NMR spectra for the cyclopentadienyl ring protons of complexes where the neutral ligand is a conjugated diene are, with one exception, normal.A single crystal X-ray structural analysis of (η⁴-2,4-dimethylpenta-1,4-diene)(η⁵-formylcyclopentadienyl)rhodium(I) (which exhibits an abnormal ¹H NMR spectrum) reveals substantial localisation of electron density in the C(3)C(4) Cp ring bond (1.283(33) Å) which may be consistent with a contribution from an ‘allyl-ene’ rotamer to the ring—metal bonding scheme. An extended Hückel calculation with self consistent charge iteration was performed on this complex.The results predict a greater Mulliken overlap population for the C(3)C(4) bond in the cyclopentadienyl ring and show that the localisation is dependent on both the Cp ring substituent and the nature of the diolefin. The mass spectral fragmentation patterns of some representative diene complexes of iridium(I) and rhodium(I) are presented.     

Self-assemblies based on [Cp2Mo2(CO)4(micro,eta2-P2)]-solid-state structure and dynamic behaviour in solution

Reaction of complex [Cp2Mo2(CO)4(micro,eta 2-P2)] (Cp=C5H5 (1)) with CuPF6, AgX (X=BF4, ClO4, PF6, SbF6, Al{OC(CF3)3}4) and [(Ph3P)Au(THF)][PF6] (THF=tetrahydrofuran), respectively, results in the facile formation of the dimers 3 b-h of the general formula [M2({Cp2Mo2 (CO)4(micro,eta 2:eta 2-P2)}2)({Cp2Mo2(CO)4 (micro,eta 2:eta 1:eta 1-P2)}2)][X]2 (M=Cu, Ag, Au; X=BF4, ClO4, PF6, SbF6, Al{OC(CF3)3}4). As revealed by X-ray crystallography, all these dimers comprise dicationic moieties that are well-separated from the weakly coordinating anions in the solid state. If 1 is allowed to react with AgNO2 and LAuCl (L=CO or tetrahydrothiophene), respectively, the dimer [Ag2{Cp2Mo2 (CO)4(micro,eta 2:eta 1:eta 1-P2)}2(eta 2-NO2)2] (5) and the complex [AuCl{Cp2Mo2(CO)4(micro,eta 2:eta 1-P2)}] (6) are formed, which have also been characterised by X-ray crystallography. In compounds 5 and 6, the anions remain coordinated to the Group 11 metal centres. Spectroscopic data suggest that the dimers 3 b-h display dynamic behaviour in solution and this is discussed by using the comprehensive results obtained for 3 g (M=Ag; X=Al{OC(CF3)3}4) as a basis. The interpretation of the experimental results is facilitated by density functional theory (DFT) calculations on 3 g (structures, energetics, NMR shielding tensors). The 31P magic angle spinning (MAS) NMR spectra recorded for the dimers 3 b (M=Cu; X=PF6) and 3c (M=Ag; X=BF4) as well as that of the previously reported one-dimensional (1 D) polymer [Ag2{Cp2Mo2(CO)4(micro,eta 2:eta 1:eta 1-P2)}3(micro,eta 1:eta 1-NO3)]n[NO3]n (4) are also discussed herein and the strong dependence of the chemical shift of the phosphorus atoms within each compound on subtle structural differences in the solid state is demonstrated. Furthermore, the X-ray crystallographic and 31P MAS NMR spectroscopic characterisation of a new polymorph of 1 is reported.     

Derivatization of glucose and 2-deoxyglucose for transition metal complexation: substitution reactions with organometallic 99mTc and Re precursors and fundamental NMR investigations

Synthetic strategies for the bifunctionalization of glucose and 2-deoxyglucose at position C-1 for transition metal coordination are reported. In particular organometallic technetium and rhenium complexes for potential use in diagnostic nuclear medicine were synthesized and investigated. Specifically, a common iminodiacetic acid (IDA) moiety was O-glycosidically connected through an ethylene spacer group to produce the pure alpha- (in case of 2-deoxyglucose) and beta-anomer (in case of glucose). Reaction of the sugar derivatives with the organometallic precursor [M(H2O)3(CO)3]+ (M = 99mTc, Re) produced single products in high yield, which are water-soluble and water-stable. The displacement of the three water molecules of the metal precursor and thus the tridentate coordination of the metal-tricarbonyl core exclusively via the amine and the two carboxylic acid functionalities of the IDA chelate was verified by means of 1D and 2D 1H NMR spectroscopy, mass spectrometry, and IR spectroscopy. The radioactive-labeled products (99mTc) proved their excellent stability in vitro in physiological phosphate buffer (pH = 7.4) and human plasma over a period of 24 h at 37 degrees C.     

Phosphine-substituted dithiolene complexes as ligands: communication between ruthenium(II) centers through a dimolybdenum bis(dithiolene) core

The reaction of Mo2(SCH2CH2S)2Cp2 (1; Cp=eta-C5H5) with an excess of an alkyne in refluxing dichloromethane affords the bis(dithiolene) complexes Mo2(micro-SCR1=CR2S)2Cp2 (2a, R1=R2=CO2Me; 2b, R1=R2=Ph; 2c, R1=H, R2=CO2Me) whereas with 1 equiv of alkyne at room temperature the mixed dithiolene-dithiolate species Mo2(micro-SCR1=CR2S)(micro-SCH2CH2S)Cp2 (3a, R1=R2=CO2Me; 3b, R1=R2=Ph) are formed. The remaining dithiolate ligand in 3 can then be converted into a different dithiolene by reaction with a second alkyne. Applying this methodology, we have used bis(diphenylphosphino)acetylene to prepare the first examples of complexes containing phosphine-substituted dithiolene ligands: Mo2{micro-SC(CO2Me)=C(CO2Me)S}{micro-SC(PPh2)=C(PPh2)S}Cp2 (2g) and Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2 (2h). Tri- and tetrametallic complexes can then be assembled by coordination of these diphosphines to CpRuCl units by reaction with CpRu(PPh3)2Cl. Electrochemical studies of the Ru(II)/Ru(III) couple in Mo2{micro-SC(PPh2)=C(PPh2)S}2Cp2(RuClCp)2 (4b) reveals that the two separate ruthenium centers are oxidized electrochemically at different potentials, demonstrating communication between them through the dimolybdenum bis(dithiolene) core. Density functional theory calculations were carried out to explore the electronic structures of these species and to predict and assign their electronic spectra.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Observation of hysteretic bistability in [Co(III)Cp(2)](+)[Fe(III)I(4)](-)

[Co(III)Cp(2)](+)[Fe(III)I(4)](-) (Cp = cyclopentadienyl) prepared by the double oxidation of FeI(2) and CoCp(2) with iodine exhibits a 30 degrees C thermal hysteresis in magnetic susceptibility between 134 and 164 K that is attributed to a phase transition to a disordered triclinic unit cell from an ordered monoclinic unit cell upon cooling.     

Reactivity of transition metal-phosphorus triple bonds towards triply bonded [{CpMo(CO)2}2]: formation of heteronuclear cluster compounds

Thermolysis of [Cp*P{W(CO)5}2] (1) in the presence of [{CpMo(CO)2}2] leads to the novel complexes [{(CO)2Cp*W}{CpMo(CO)2}(micro,eta2:eta1:eta1-P2{W(CO)5}2)] (6; Cp=eta5-C5H5, Cp*=eta5-C5Me5), [{(micro-O)(CpMoWCp*)W(CO)4}{micro3-PW(CO)5}2] (7), [{CpMo(CO)2}2{Cp*W(CO)2}{micro3-PW(CO)5}] (8) and [{CpMo(CO)2}2{Cp*W(CO)2}(micro3-P)] (9). The structural framework of the main products 8 and 9 can be described as a tetrahedral Mo2WP unit that is formed by a cyclisation reaction of [{CpMo(CO)2}2] with an [Cp*(CO)2W[triple chemical bond]P-->W(CO)5] intermediate containing a W--P triple bond and subsequent metal-metal and metal-phosphorus bond formation. Photolysis of 1 in the presence of [{CpMo(CO)2}2] gives 8, 9 and phosphinidene complex [(micro3-PW(CO)5){CpMo(CO)2W(CO)5}] (10), in which the P atom is in a nearly trigonal-planar coordination environment formed by one {CpMo(CO)2} and two {W(CO)5} units. Comprehensive structural and spectroscopic data are given for the products. The reaction pathways are discussed for both activation procedures, and DFT calculations reveal the structures with minimum energy along the stepwise Cp* migration process under formation of the intermediate [Cp*(CO)2W[triple chemical bond]P-->W(CO)5].     

Different nuclearity silver(I) complexes with novel tetracyano pendant-armed hexaazamacrocyclic ligands

A new series of different nuclearity silver(I) complexes with a variety of tetracyano pendant-armed hexaazamacrocyclic ligands containing pyridine rings (Ln) has been prepared starting from the nitrate and perchlorate Ag(I) salts in acetonitrile solutions. The ligands and complexes were characterized by microanalysis, conductivity measurements, IR, Raman, electronic absorption and emission spectroscopy, and L-SIMS spectrometry. (1)H NMR titrations were employed to investigate silver complexation by ligands L3 and L.(4) The compounds [Ag2L2(NO3)2] (2), ([Ag2L2](ClO4)2.2CH3CN)(infinity) (4), [AgL3](ClO(4)).CH3CN (5), and [Ag4(L4)2(NO3)2](NO3)2.4CH3CN.2H2O (7) were also characterized by single-crystal X-ray diffraction. The complexes have different nuclearities. Complex 2 is dinuclear with an {AgN3O2} core and a significant intermetallic interaction, whereas complex 4 has a polymeric structure formed by dinuclear distorted {AgN4} units joined by nitrile pendant arms. Compound 5 is mononuclear with a distorted {AgN2} linear geometry, and complex 7 consists of discrete units of a tetranuclear array of silver atoms with {AgN3O} and {AgN4} cores in distorted square planar environments. Complexes 2 and 4 were found to be fluorescent in the solid state at room temperature because of the Ag-Ag interactions.     

半夹芯16电子化合物CpCo(S2C2B10H10)中B(3,6)位的选择性分步取代反应

16e半夹芯化合物CpCo(S2C2B10H10)(Cp:cyclopentadienyl)(1)与炔烃HC≡CC(O)Fc(Fc:ferrocenyl)在物质的量之比为1∶1时反应生成化合物CpCo(S2C2B10H9)(CH=CHC(O)Fc)(2)。在化合物2中,一分子HC≡CC(O)Fc偶合到原料化合物1的碳硼烷笼子的B(3)位点,导致B(3)位的氢原子迁移到炔烃的内部碳原子上形成烯烃取代基。2能继续与另外一分子HC≡CC(O)Fc反应,生成B-双取代产物CpCo(S2C2B10H8)(CH=CHC(O)Fc)2(3)。3仍然是1个16e化合物,并且在B(3,6)位点有2个反式烯烃取代基CH=CHC(O)Fc。在过量炔烃存在情况下,该反应生成化合物3及炔烃环三聚产物1,3,5-{HC=CC(O)Fc}3(4)。化合物2、3、4用红外,核磁,元素分析,质谱和单晶X-射线衍射分析等方法进行了表征。     

(Cp-R)M(CO)(3) ] (M=Re or (99m) Tc) Arylsulfonamide, Arylsulfamide, and Arylsulfamate Conjugates for Selective Targeting of Human Carbonic Anhydrase IX

Enhanced receptor selectivity: Carbonic anhydrase inhibitors are relevant for both cancer diagnosis and therapy. Combining non-radioactive Re compounds with their radioactive (99m) Tc homologs enables the use of identical molecules for therapy and imaging (theragnostic). The syntheses and in?vitro evaluation of [(Cp-R)M(CO)(3) ] (Cp=cyclopentadienyl, M=Re, (99m) Tc) with R being a highly potent carbonic-anhydrase-targeting vector is reported.     

Synthesis and Anti-inflammatory Action of(η-C5H5)2Ti(Sal)2 and (η-C5H5)2Ti(Clo)2

Two new complexes (Cp)2Ti(Sal)2 and(Cp)2Ti(Clo)2(Cp=Cyclopentadienyl η5-C5H5), have been synthesized in anhydrous THF by the reaction of Hsal(o-hydroxybenzoic acid, salicylate acid) or Hclo[N-(m-chloro-phe-nyl) anthranili acid, acidum clofenamicum] with (Cp)2TiCl2 and characterized by means of elemental analyses, IR, 1H NMR, 13C NMR, UV and molar conductivity. In complex (Cp)2Ti(Sal)2 or (Cp)2Ti(Clo)2, the oxygen atom of the carboxyl group coordinates to Ti(IV) in a monodentate manner. The inhibitory action of the complexes on mouse ear tumefaction caused by croton oil and rat foot granulation growth caused by cotton balls is higher than that of the corresponding ligands Hsal, Hclo and [(Cp)2TiCl2], whereas their toxicity is lower than those of the free ligands.     

One-dimensional polymers based on [{CpMo(CO)2}2(mu,eta2-P2)]: solid-state conformation analysis by NMR spectroscopy and DFT calculations

Reaction of the complex [{CpMo(CO)2}2(mu,eta2-P2)] (1) with CuI halides leads to the quantitative formation of the novel one-dimensional linear polymers [CuX{Cp2Mo2(CO)4(mu,eta2:eta1:eta1-P2)}](infinity) (X=Cl (4), Br (5), I (6)). The same products 4 and 5 were obtained when 1 was treated with CuCl2 and CuBr2, respectively. The solid-state structures are compared and their remarkable influence on the respective (31)P magic angle spinning (MAS) NMR spectra is interpreted with the help of density functional theory (DFT) calculations on the model compounds [{(CuX)2{Cp2Cr2(CO)4(mu,eta(2):eta1:eta1-P2)}2}3] (X=Cl (4 a), Br (5 a)) in which the molybdenum atoms are replaced by their lighter homologue chromium.     

Synthesis, structure, and biological activity of ferrocenyl carbohydrate conjugates

Seven ferrocenyl carbohydrate conjugates were synthesized. Coupling reactions of monosaccharide derivatives with ferrocene carbonyl chloride produced {6-N-(methyl 2,3,4-tri-O-acetyl-6-amino-6-deoxy-alpha-D-glucopyranoside)}-1-ferrocene carboxamide (3), {1-O-(2,3,4,6-tetra-O-benzyl-D-glucopyranose)}-1-ferrocene carboxylate (4), and {6-O-(1,2,3,4-tetra-O-acetyl-beta-D-glucopyranose)}-1-ferrocene carboxylate (5). Similarly, 1,1'-bis(carbonyl chloride)ferrocene was coupled with the appropriate sugars to produce the disubstituted analogues bis{6-N-(methyl 2,3,4-tri-O-acetyl-6-amino-6-deoxy-alpha-D-glucopyranoside)}-1,1'-ferrocene carboxamide (8), bis{1-O-(2,3,4,6-tetra-O-benzyl-D-glucopyranose)}-1,1'-ferrocene carboxylate (9), and bis{6-O-(1,2,3,4-tetra-O-acetyl-beta-D-glucopyranose)}-1,1'-ferrocene carboxylate (10). {6-N-(Methyl-6-amino-6-deoxy-alpha-D-glucopyranoside)}-1-ferrocene carboxamide monohydrate (12) was synthesized via amide coupling of an activated ferrocenyl ester with the corresponding carbohydrate. All compounds were characterized by elemental analysis, 1H NMR spectroscopy, and mass spectrometry. X-ray crystallography confirmed the solid-state structure of three ferrocenyl carbohydrate conjugates: 2-N-(1,3,4,6-tetra-O-acetyl-2-amino-2-deoxy-D-glucopyranose)-1-ferrocene carboxamide (1), 1-S-(2,3,4,6-tetra-O-acetyl-1-deoxy-1-thio-D-glucopyranose)-1-ferrocene carboxylate (2), and 12. The above compounds, along with bis{2-N-(1,3,4,6-tetra-O-acetyl-2-amino-2-deoxy-D-glucopyranose)}-1,1'-ferrocene carboxamide (6), bis{1-S-(2,3,4,6-tetra-O-acetyl-1-deoxy-1-thio-D-glucopyranose)}-1,1'-ferrocene carboxylate (7), and 2-N-(2-amino-2-deoxy-D-glucopyranose)-1-ferrocene carboxamide (11) were examined for cytotoxicity in cell lines (L1210 and HTB-129) and for antimalarial activity in Plasmodium falciparum strains (D10, 3D7, and K1, a chloroquine-resistant strain). In general, the compounds were nontoxic in the human cell line tested (HTB-129), and compounds 4, 7, and 9 showed moderate antimalarial activity in one or more of the P. falciparum strains.     

Syntheses and characterization of dicarbonyl-nitrosyl complexes of technetium(I) and rhenium(I) in aqueous media: spectroscopic, structural, and DFT analyses

This work describes new synthetic routes to produce mixed carbonyl-nitrosyl complexes of technetium(I) and rhenium(I) in aqueous media. NaNO2, NOHSO4, and NO2(g) have been used to produce in situ nitrous acid as the primary source of NO+. Starting from the organometallic precursor fac-[MX3(CO)3]+, 1 (M = 99Tc, Re; X = Cl, Br), the formation of mixed dicarbonyl-mononitrosyl complexes was observed in aqueous hydrochloric and hydrobromic acid. Time-dependent analyses of the reactions by means of HATR-IR and 99Tc NMR spectroscopy in solution revealed the almost quantitative substitution of one CO ligand by NO+ and, thus, the formation of complexes with facial arrangement of the three pi-acceptor ligands. In the case of technetium, the monomeric complex (NEt4)[TcCl3(CO)2NO] (3a) and the dimeric, chloride-bridged, neutral complex [TcCl(mu-Cl)(CO)2NO]2 (4a) were produced. In the case of rhenium, the monomeric species (NEt4)[ReBr2X(CO)2NO] (X = Br (3b), NO3 (5)) was solely isolated. The X-ray structure of complexes 4a and 5 are discussed. The crystallographic analyses revealed the coordination of the NO+ group trans to the terminal chloride (4a) or the bromide (5), respectively. Crystal data: complex 4a (C4Cl4N2O(6)Tc2), monoclinic, Cc, a = 18.82(3) A, b = 6.103(6) A, c = 12.15(2) A, alpha = 90 degrees , beta = 105.8(2) degrees , gamma = 90 degrees , V = 1343(3) A(3), Z = 4; complex 5 (C10H20N3O(6)Br2Re), orthorhombic, P2(1)2(1)2(1), a = 10.2054(5) A, b = 12.5317(7) A, c = 13.9781(7) A, V = 1787.67(16) A(3), Z = 4. The isolated complexes and their potential facial isomers have been further investigated by density functional theory (DFT) calculations. The energy differences of the isomers are relatively small; however, the calculated energies are consistent with the formation of the observed and isolated compounds. The calculated bond lengths and angles of complex 5 are in good agreement with the data determined by X-ray diffraction. Experiments on the no-carrier-added level starting from fac-[99mTc(H2O)3(CO)3]+ revealed the formation of the complex fac-[99mTcCl(H2O)2(CO)2NO]+ in reasonable good yields. This aqueous-based, synthetic approach will enable the future evaluation of this novel, low-valent metal precursor for potential use in radiopharmacy.