载铂Sr(Zr1－xYx)O3－δ-TiO2异质结光催化剂模拟太阳光催化产氢

利用光化学还原法制备载铂Sr(Zr_1－xY_x)O_3－δ-TiO₂ (Pt-SZYT)异质结光催化剂, 采用XRD, SEM, UV-Vis, PL对催化剂的形貌及性能进行表征. 以工业有机污染物草酸为电子给体, 模拟太阳光下光催化产氢为探针, 评价了催化剂的活性. 研究了载铂量、草酸浓度对催化剂产氢活性的影响, 并探讨了Pt-SZYT催化剂产氢活性与光致发光(PL)性能的关系, 以及催化剂的连续使用效果. 结果表明: 模拟太阳光条件下, Pt-SZYT催化剂具有良好稳定的光催化产氢活性, 催化剂的最佳载铂量为0.90 wt%. PL分析表明Pt-SZYT的光催化产氢活性越高, 其荧光强度越弱. 草酸50 mmol•L^－1, 催化剂用量1.0 g•L^－1时, 催化剂(w＝0.90%) Pt-SZYT-70的平均产氢速率为1.68 mmol•h^－1.     

Photocatalytic hydrogen generation of Pt-Sr(Zr1 − x Y x )O3 − δ -TiO2 heterojunction under the irradiation of simulated sunlight

The Pt-Sr(Zr_{1 − x} Y _x )O_{3 − δ} -TiO₂(Pt-SZYT) heterojunction photocatalysts were prepared by a photodeposition method. The composite particles were characterized by XRD, SEM, UV-Vis DRS, and PL techniques. Photocatalytic hydrogen generation in H₂C₂O₄ aqueous solution under the irradiation of simulated sunlight was used as a probe reaction to evaluate the photocatalytic activity of the photocatalysts. The effects of the content of Pt loading and the concentration of oxalic acid on the photocatalytic activity of the catalyst were discussed. The continuous photocatalytic activity of the Pt-SZYT and the relationship between PL intensity and hydrogen generation were also discussed. The results show that Pt-SZYT catalysts had high photocatalytic activity of hydrogen generation. The content of Pt loading and the concentration of oxalic acid have important influence on the photocatalytic hydrogen generation. The optimal loading content of platinum was 0.90 mass%. Under this condition, the average rate of photocatalytic hydrogen generation was 1.68 mmol·h⁻¹ when the concentration of oxalic acid was 50 mmol·L⁻¹. The higher the photocatalytic activity, the weaker the PL intensity, which was demonstrated by the analysis of PL spectra. __________ Translated from Acta Chimica Sinica, 2008, 61 (in Chinese)     

Energy-Saving Electrolytic Hydrogen Generation: Ni2P Nanoarray as a High-Performance Non-Noble-Metal Electrocatalyst

It is highly attractive but challenging to develop earth-abundant electrocatalysts for energy-saving electrolytic hydrogen generation. Herein, we report that Ni₂P nanoarrays grown in situ on nickel foam (Ni₂P/NF) behave as a durable high-performance non-noble-metal electrocatalyst for hydrazine oxidation reaction (HzOR) in alkaline media. The replacement of the sluggish anodic oxygen evolution reaction with such the more thermodynamically favorable HzOR enables energy-saving electrochemical hydrogen production with the use of Ni₂P/NF as a bifunctional catalyst for anodic HzOR and cathodic hydrogen evolution reaction. When operated at room temperature, this two-electrode electrolytic system drives 500 mA cm⁻² at a cell voltage as low as 1.0 V with strong long-term electrochemical durability and 100 % Faradaic efficiency for hydrogen evolution in 1.0 m KOH aqueous solution with 0.5 m hydrazine.     

Energy‐Saving Electrolytic Hydrogen Generation: Ni2P Nanoarray as a High‐Performance Non‐Noble‐Metal Electrocatalyst

It is highly attractive but challenging to develop earth‐abundant electrocatalysts for energy‐saving electrolytic hydrogen generation. Herein, we report that Ni₂P nanoarrays grown in situ on nickel foam (Ni₂P/NF) behave as a durable high‐performance non‐noble‐metal electrocatalyst for hydrazine oxidation reaction (HzOR) in alkaline media. The replacement of the sluggish anodic oxygen evolution reaction with such the more thermodynamically favorable HzOR enables energy‐saving electrochemical hydrogen production with the use of Ni₂P/NF as a bifunctional catalyst for anodic HzOR and cathodic hydrogen evolution reaction. When operated at room temperature, this two‐electrode electrolytic system drives 500 mA cm⁻² at a cell voltage as low as 1.0 V with strong long‐term electrochemical durability and 100 % Faradaic efficiency for hydrogen evolution in 1.0 m KOH aqueous solution with 0.5 m hydrazine.     

Carbonyl‐Grafted g‐C3N4 Porous Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Carbonyl‐grafted g‐C₃N₄ porous nanosheets (COCNPNS) were fabricated by means of a two‐step thermal process using melamine and oxalic acid as starting reagents. The combination of melamine with oxalic acid to form a melamine–oxalic acid supramolecule as a precursor is key to synthesizing carbonyl‐grafted g‐C₃N₄. The bulk carbonyl‐grafted g‐C₃N₄ (COCN) was further thermally etched onto porous nanosheets by O₂ under air. In such a process, the carbonyl groups were partly removed and the obtained sample showed remarkably enhanced visible‐light harvesting and promoted the separation and transfer of photogenerated electrons and holes. With its unique porous structure and enhanced light‐harvesting capability, under visible‐light illumination (λ >420 nm) the prepared COCNPNS exhibited a superior photocatalytic hydrogen evolution rate of 83.6 μmol h⁻¹, which is 26 times that of the p‐CN obtained directly from thermal polycondensation of melamine.     

Photocatalytic activity of TiO2-MO x composites in the reaction of hydrogen generation from aqueous isopropanol solution

The photocatalytic activity of the composites TiO₂-MO _x (M = Ni, Cu, Zn, Fe, Cr) was studied in the reaction of hydrogen generation from aqueous alcoholic suspensions under UV light. The samples modified by the oxides of the metals capable of being reduced from oxides under photocatalytic conditions showed a high catalytic activity. The studied modifiers were divided in three groups in terms of their effect of the photocatalytic activity of TiO₂: activating (NiO, CuO), inhibiting (Fe₂O₃), and indifferent (ZnO, Cr₂O₃).     

Preparation, characterization and photocatalytic activity of Co3O4/LiNbO3 composite

The Co₃O₄/LiNbO₃ composites were synthesized by impregnation of LiNbO₃ in an aqueous solution of cobalt nitrate and next by calcination at 400°C. The activity of produced samples has been investigated in the reaction of photocatalytic hydrogen generation. The crystallographic phases, optical and vibronic properties were studied using X-ray diffraction (XRD), diffuse reflectance (DR) UV-vis and resonance Raman spectroscopic techniques, respectively. The influence of cobalt content (range from 0.5 wt.% to 4 wt.%) on the photocatalytic activity of Co₃O₄/LiNbO₃ composites for photocatalytic hydrogen generation has been investigated. Co₃O₄/LiNbO₃ composites exhibited higher than LiNbO₃ photocatalytic activity for hydrogen generation. The highest H₂ evolution efficiency was observed for Co₃O₄/LiNbO₃ composite with 3 wt.% cobalt content. The amount of H₂ obtained in the presence of LiNbO₃ and Co₃O₄/LiNbO₃ (3 wt.% of cobalt content) was 1.38 µmol/min and 2.59 µmol min^?1, respectively.      

MoS2 as a Co-Catalyst for Photocatalytic Hydrogen Production: A Mini Review

Molybdenum disulfide (MoS₂), with a two-dimensional (2D) structure, has attracted huge research interest due to its unique electrical, optical, and physicochemical properties. MoS₂ has been used as a co-catalyst for the synthesis of novel heterojunction composites with enhanced photocatalytic hydrogen production under solar light irradiation. In this review, we briefly highlight the atomic-scale structure of MoS₂ nanosheets. The top-down and bottom-up synthetic methods of MoS₂ nanosheets are described. Additionally, we discuss the formation of MoS₂ heterostructures with titanium dioxide (TiO₂), graphitic carbon nitride (g-C₃N₄), and other semiconductors and co-catalysts for enhanced photocatalytic hydrogen generation. This review addresses the challenges and future perspectives for enhancing solar hydrogen production performance in heterojunction materials using MoS₂ as a co-catalyst.     

Three new quinuclidine‐based structures: second harmonic generation response for 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride

The crystal structures of three quinuclidine‐based compounds, namely (1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine monohydrate, C₇H₁₃N₃·H₂O ( 1 ), 1,2‐bis(1‐azabicyclo[2.2.2]octan‐3‐ylidene)hydrazine, C₁₄H₂₂N₄ ( 2 ), and 1,2‐bis(1‐azoniabicyclo[2.2.2]octan‐3‐ylidene)hydrazine dichloride, C₁₄H₂₄N₄²⁺·2Cl^? ( 3 ), are reported. In the crystal structure of 1 , the quinuclidine‐substituted hydrazine and water molecules are linked through N—H…O and O—H…N hydrogen bonds, forming a two‐dimensional array. The compound crystallizes in the centrosymmetric space group P2₁/c. Compound 2 was refined in the space group Pccn and exhibits no hydrogen bonding. However, its hydrochloride form 3 crystallizes in the noncentrosymmetric space group Pc. It shows a three‐dimensional network structure via intermolecular hydrogen bonding (N—H…C and N/C—H…Cl). Compound 3 , with its acentric structure, shows strong second harmonic activity.     

Succinic,fumaric, adipic and oxalic acid cocrystals of promethazine hydrochloride

Novel cocrystals of promethazine hydrochloride [PTZ‐Cl; systematic name: N,N‐dimethyl‐1‐(10H‐phenothiazin‐10‐yl)propan‐2‐aminium chloride] with succinic acid (PTZ‐Cl‐succinic, C₁₇H₂₁N₂S⁺·Cl^?·0.5C₄H₆O₄), fumaric acid (PTZ‐Cl‐fumaric, C₁₇H₂₁N₂S⁺·Cl^?·0.5C₄H₄O₄) and adipic acid (PTZ‐Cl‐adipic, C₁₇H₂₁N₂S⁺·Cl^?·0.5C₆H₁₀O₄) were prepared by solvent drop grinding and slow evaporation from acetonitrile solution, along with two oxalic acid cocrystals which were prepared in tetrahydrofuran (the oxalic acid hemisolvate, PTZ‐Cl‐oxalic, C₁₇H₂₁N₂S⁺·Cl^?·0.5C₂H₂O₄) and nitromethane (the hydrogen oxalate salt, PTZ‐oxalic, C₁₇H₂₁N₂S⁺·C₂HO₄^?). The crystal structures obtained by crystallization from tetrahydrofuran and acetonitrile include the Cl^? ion in the lattice structures, while the Cl^? ion is missing from the crystal structure obtained by crystallization from nitromethane (PTZ‐oxalic). In order to explain the formation of the two types of supramolecular configurations with oxalic acid, the intermolecular interaction energies were calculated in the presence of the two solvents and the equilibrium configurations were determined using density functional theory (DFT). The cocrystals were studied by X‐ray diffraction, IR spectroscopy and differential scanning calorimetry. Additionally, a stability test under special conditions and water solubility were also investigated. PTZ‐Cl‐succinic, PTZ‐Cl‐fumaric and PTZ‐Cl‐adipic crystallized having similar lattice parameter values, and showed a 2:1 PTZ‐Cl to dicarboxylic acid stoichiometry. PTZ‐Cl‐oxalic crystallized in a 2:1 stoichiometric ratio, while the structure lacking the Cl atom belongs has a 1:1 stoichiometry. All the obtained crystals exhibit hydrogen bonds of the type PTZ…Cl…(dicarboxylic acid)…Cl…PTZ, except for PTZ‐oxalic, which forms bifurcated bonds between the hydrogen oxalate and promethazinium ions, along with an infinite hydrogen‐bonded chain between the hydrogen oxalate anions.     

Infrared matrix-isolation spectra of monomeric oxalic acid

Infrared spectra of monomeric oxalic acid-h₂, -hd and -d₂ have been observed using neon matrix-isolation spectroscopy. In addition, spectra of oxalic acid-h₂, vapor were obtained using a heated absorption cell with a 10 m pathlength. All IR active fundamentals are assigned for oxalic acid-h₂, and -d₂, except the low frequency torsion. The spectra are interpreted in terms of the C_2h intramolecularly hydrogen bonded model. Two vibrational assignments are discussed; one involves a very large intensity for the v₈ + v₁₁ (COH torsion) combination band of oxalic acid-h₂. Tentative values for several Raman active fundamentals of oxalic acid-h₂ are suggested using possible combination bands. Few fundamentals of oxalic acid-hd correlating with the Raman modes of the symmetric monomers could be observed. A force constant analysis of the by secular block is presented.     

Ultrasonic Preparation of Hierarchical Graphene‐Oxide/TiO2 Composite Microspheres for Efficient Photocatalytic Hydrogen Production

Hierarchical graphene oxide (GO)‐TiO₂ composite microspheres with different GO/TiO₂ mass ratios were successfully prepared by mixing GO and TiO₂ microspheres under ultrasonic conditions. Ultrasonication helped the GO and TiO₂ microsphere to uniformly mix on the microscale. The results showed that the GO‐TiO₂ composites that were prepared by ultrasonic mixing exhibited significantly higher hydrogen‐evolution rates than those that were synthesized by simple mechanical grinding, owing to synergetic effects, including enhanced light absorption and scattering, as well as improved interfacial charge transfer because of the excellent contact between the GO sheets and TiO₂ microspheres. In addition, GO‐TiO₂‐3 (3 wt. % GO) showed the highest hydrogen‐generation rate (305.6 μmol h^?), which was about 13 and 3.3‐times higher than those of TiO₂ microsphere and GO‐P25 (with 3 wt. % GO), respectively. Finally, a tentative mechanism for hydrogen production is proposed and supported by photoluminescence and transient photocurrent measurements. This work highlights the potential applications of GO‐TiO₂ composite microspheres in the field of clean‐energy production.     

Synthesis of silanized maghemite nanoparticles onto reduced graphene sheets composites

Novel γ-Fe₂O₃@APTES@rGO composites are successfully synthesized by using graphene oxide and silanized maghemite nanoparticles. Graphene oxide and maghemite were obtained by Hummers and Massart methods, respectively. The silanization process was done to functionalize maghemite surface with a controllable quantity of amino groups. Then, by adding aqueous graphene oxide suspension, the bonding between graphene oxide and silanized maghemite nanoparticles was done in refluxing conditions. Afterwards, chemical reduced graphene oxide reaction was realized by addition of hydrazine solution. The characterization of γ-Fe₂O₃@APTES@rGO composites was studied by X-ray Diffraction, Fourier Transformed Infrared Spectroscopy, thermogravimetric analysis and scanning electron microscopy.     

Catalytic effect of iron wires on the syntheses of ammonia and hydrazine in a radio-frequency discharge

The catalytic effect of iron wires on plasma syntheses of ammonia and hydrazine has been studied in the nitrogen-hydrogen plasma prepared using rf discharge at a pressure of 650 Pa (5 Torr). The product was mainly ammonia including a small amount of hydrazine. When iron wires were placed in the plasma downstream of the gas flow, the yields of both products increased, about two times in ammonia and two orders of magnitude in hydrazine. The yields increased with increasing number of wires (the surface area of the catalyst). The dissociative adsorption of nitrogen molecules and/or molecular ions on the iron surface and the formation of NH_x by the reaction with hydrogen in the plasma followed by the formation of NH₃ or N₂H₄ are considered as a reaction scheme. This is supported by the identification of NH₃ with XPS of the surface of iron wires.Partly presented at the 10th International Symposium on Plasma Chemistry, August 4–9, 1991, Bochum, Germany.     

The influence of ultrasonic waves on selenium hydrosol

The influence of ultrasonic waves on selenium hydrosol prepared by the reduction of SeO₂ with sulphur dioxide and hydrazine hydrate is studied. It is observed that the sols when exposed to ultrasonic waves become unstable, and get finally completely coagulated. The sol prepared by the reduction with hydrazine hydrate is found to be more resistant to the action of ultrasonic waves which may be due to the adsorbed impurities presumably hydrazine hydrate. The specific conductivity and hydrogen ion concentration increases with the time of exposure to ultrasonic waves. The coagulation of the sol may be due to the fact that the adsorbed SeO₃ ^? ions get free by the ultrasonic energy. In the presence of non-electrolytes as ethyl alcohol or acetone the sol becomes more stable to the action of ultrasonic waves.     

Chemiluminescence quantum yield in permanganate reduction reactions in acid medium

Chemiluminescence quantum yields for the reactions of permanganate with oxalic, tartaric, and citric acids; hydrazine; KBr; and FeSO₄ in aqueous solutions of sulfuric acid have been measured. The maximum quantum yield reaches 1.2 × 10^?5 einstein/mol with the chemiexcitation yield being 2%. Hence, the relatively low chemiluminescence quantum yield is due to a low yield of light emission by chemiexcited particles, rather than the low chemiexcitation yield.     

磁性普鲁士蓝纳米颗粒的合成及其化学修饰电极的制作

利用FeSO₄与FeCl₃合成了超细磁性Fe₃O₄纳米颗粒, 并进一步利用该纳米颗粒与铁氰酸钾在酸性溶液(pH～2)中的化学反应成功制备了一种新型的磁性普鲁士蓝纳米颗粒; 研究了该磁性颗粒的磁学性能, 通过磁力将其修饰于固体石蜡碳糊电极表面制成了化学修饰电极, 考察了该电极对过氧化氢的电催化还原及对水合肼的电催化氧化特性. 该化学修饰电极可对过氧化氢和水合肼进行测定, 线性范围分别为过氧化氢2×10^－6～5×10^－3 mol/L, 水合肼7.2×10^－7～3.6×10^－4 mol/L. 利用磁性普鲁士蓝纳米颗粒制得的修饰电极具有催化性能高、稳定性好、表面易更新等优点.     

Catalytic methanolysis of hydrazine borane: a new and efficient hydrogen generation system under mild conditions

Safe and efficient hydrogen storage is a major obstacle for using hydrogen as an energy carrier. Therefore, intensive efforts have been focused on the development of new materials for chemical hydrogen storage. Of particular importance, hydrazine borane (N(2)H(4)BH(3)) is emerging as one of the most promising solid hydrogen carriers due to its high gravimetric hydrogen storage capacity (15.4 wt%) and low molecular weight. Herein, we report metal catalyzed methanolysis of hydrazine borane (N(2)H(4)BH(3), HB) as a fast hydrogen generation system under mild conditions. When trace amounts of nickel(ii) chloride (NiCl(2)) is added to the methanol solution of hydrazine borane ([HB]/[Ni] ≥ 200) the reaction solution releases 3 equiv. of H(2) with a rate of 24 mol H(2) (mol Ni min)(-1) at room temperature. The results reported here also includes (i) identification of the reaction products by using ATR-IR, DP-MS, (1)H and (11)B NMR spectroscopic techniques and the establishment of the reaction stoichiometry, (ii) investigation of the effect of substrate and catalyst concentrations on the hydrogen generation rate to determine the rate law for the catalytic methanolysis of hydrazine borane, (iii) determination of the activation parameters (E(a), ΔH(#), and ΔS(#)) for the catalytic methanolysis of hydrazine borane by using the temperature dependent rate data of the hydrogen generation.     

Aripiprazole salts. III. Bis(aripiprazolium) oxalate–oxalic acid (1/1)

The asymmetric unit of the title salt [systematic name: bis(4‐(2,3‐dichlorophenyl)‐1‐{4‐[(2‐oxo‐1,2,3,4‐tetrahydroquinolin‐7‐yl)oxy]butyl}piperazin‐1‐ium) oxalate–oxalic acid (1/1)], 2C₂₃H₂₈Cl₂N₃O₂⁺·C₂O₄²⁻·C₂H₂O₄, consists of one protonated aripiprazole unit (HArip⁺), half an oxalate dianion and half an oxalic acid molecule, the latter two lying on inversion centres. The conformation of the HArip⁺ cation differs from that in other reported salts and resembles more the conformation of neutral Arip units in reported polymorphs and solvates. The intermolecular interaction linking HArip⁺ cations is also similar to those in reported Arip compounds crystallizing in the space group P, with head‐to‐head N—H...O hydrogen bonds generating centrosymmetric dimers, which are further organized into planar ribbons parallel to (01). The oxalate anions and oxalic acid molecules form hydrogen‐bonded chains running along [010], which `pierce' the planar ribbons, interacting with them through a number of stronger N—H...O and weaker C—H...O hydrogen bonds, forming a three‐dimensional network.     

Acceptorless Photocatalytic Dehydrogenation of Furfuryl Alcohol (FOL) to Furfural (FAL) and Furoic Acid (FA) over Ti3C2Tx/CdS under Visible Light

Acceptorless photocatalytic dehydrogenation is not only a promising alternative to photocatalytic water splitting for hydrogen generation but also provides a green and sustainable strategy for the synthesis of value-added organic compounds. In this work, Ti₃C₂T_x/CdS nanocomposites were obtained by self-assembly of hexagonal CdS in the presence of preformed Ti₃C₂T_x nanosheets, which serves as a photocatalyst for acceptorless dehydrogenation of biomass-derived furfuryl alcohol (FOL) to furfural (FAL) and furoic acid (FA) in neutral and alkaline medium respectively, with simultaneous generation of stoichiometric hydrogen under visible light. Ti₃C₂T_x MXene acts as an efficient cocatalyst for the photocatalytic dehydrogenation of FOL over CdS, with an optimum performance achieved over 0.50 wt% Ti₃C₂T_x/CdS nanocomposite. This study provides an economic and sustainable strategy for the simultaneous valorization of biomass-derived FOL to produce FAL and FA as well as the production of clean energy hydrogen under mild condition based on noble metal-free semiconductor-based photocatalysts.