Tetracycline Removal by Activating Persulfate with Diatomite Loading of Fe and Ce

Persulfate (PS)-based oxidation technology is efficient in removing refractory organics from water. A novel diatomite (DIA) support Fe and Ce composite (Fe-Ce/DIA) was prepared for activating persulfate to degrade tetracycline in water. The Fe and Ce were uniformly loaded on DIA, and the total pore size of Fe-Ce/DIA was 6.99 × 10⁻² cm³/g, and the average pore size was 12.06 nm. Fe-Ce/DIA presented a good catalytic activity and 80% tetracycline was removed under the persulfate system. The Fe-Ce/DIA also had photocatalytic activity, and the corresponding tetracycline removal efficiency was 86% under UV irradiation. Fe-Ce/DIA exhibited less iron dissolution rate compared with Fe-DIA. The tetracycline degradation rate was enhanced when the temperature increased. The optimal tetracycline removal efficiency was obtained when the conditions were of persulfate 10 mM, Fe-Ce/DIA dosage 0.02 g/L, and tetracycline concentration 50 mg/L. In addition, Fe-Ce/DIA showed a wide pH application and good reusability and stability.     

Cyclometalated iridium(III) Aquo complexes: efficient and tunable catalysts for the homogeneous oxidation of water

A series of bis-phenylpyridine, bis-aquo iridium(III) complexes is herein shown to robustly and efficiently catalyze the oxidation of water to dioxygen in the presence of a sacrificial oxidant. Through substitution on the cyclometalating ligands of these complexes, it is shown that a broad range of oxidation potentials can be achieved within this class of catalyst. Parallel, dynamic monitoring of oxygen evolution, made possible by equipping reaction vessels with pressure-voltage transducers, facilitates correlation of these complexes' ionization potentials with their respective activity toward water oxidation. The importance of these catalysts lies in (A) their ability to oxidize water in a purely aqueous medium, (B) their simplicity of design, (C) their durability, and (D) the ease with which they can be tuned to accommodate the electrochemical needs of photosensitizers in hypothetical photochemical water oxidation and full artificial photosynthetic schemes.     

Ultralow Cost Electrochemical Sensor Made of Potato Starch and Carbon Black Nanoballs to Detect Tetracycline in Waters and Milk

Detection of traces from pharmaceutical drugs such as antibiotics in drinking water and foodstuff is essential for guaranteeing human health in some environments, and this has to be done with low cost technologies to be widely deployed in public services and industry. In this paper, we describe an ultralow cost (<US$ 0.005 per unit of sensing layer) electrochemical sensor to detect the antibiotic tetracycline, which is made of a homogeneous thin film of potato starch (PS) and carbon black (CB) deposited on glassy carbon electrodes (GCE). Detection of tetracycline was also performed in real samples consisting of tap water, river water, milk and in solutions prepared with commercial tablets of this medicine in the range between 5.0 and 120 μmol L⁻¹, with a detection and quantification limit of 1.15 and 4.47 μmol L⁻¹, respectively. The high sensitivity was attributed to the enhanced conductivity and larger surface area induced by incorporating the carbon black into potato starch. The CB‐PS/GCE electrodes were reproducible and stable, thus serving as a generic platform for detection of other antibiotics and hormones whose redox potentials are similar to those of tetracycline.     

Oxidation of formic acid and carbon monoxide on gold electrodes studied by surface-enhanced Raman spectroscopy and DFT.

The oxidation of formic acid and carbon monoxide was studied at a gold electrode by a combination of electrochemistry, in situ surface-enhanced Raman spectroscopy (SERS), differential electrochemical mass spectrometry, and first-principles DFT calculations. Comparison of the SERS results and the (field-dependent) DFT calculations strongly suggests that the relevant surface-bonded intermediate during oxidation of formic acid on gold is formate HCOO- ad*. Formate reacts to form carbon dioxide via two pathways: at low potentials, with a nearby water to produce carbon dioxide and a hydronium ion; at higher potentials, with surface-bonded hydroxyl (or oxide) to give carbon dioxide and water. In the former pathway, the rate-determining step is probably related to the reaction of surface-bonded formate with water, as measurements of the reaction order imply a surface almost completely saturated with adsorbate. The potential dependence of the rate of the low-potential pathway is presumably governed by the potential dependence of formate coverage. There is no evidence for CO formation on gold during oxidation of formic acid. The oxidation of carbon monoxide must involve the carboxyhydroxyl intermediate, but SERS measurements do not reveal this intermediate during CO oxidation, most likely because of its low surface coverage, as it is formed after the rate-determining step. Based on inconclusive spectroscopic evidence for the formation of surface-bonded OH at potentials substantially below the surface oxidation region, the question whether surface-bonded carbon monoxide reacts with surface hydroxyl or with water to form carboxyhydroxyl and carbon dioxide remains open. The SERS measurements show the existence of both atop and bridge-bonded CO on gold from two distinguishable low-frequency modes that agree very well with DFT calculations.     

A flow injection method for the analysis of tetracycline antibiotics in pharmaceutical formulations using electrochemical detection at anodized boron-doped diamond thin film electrode

A method using flow injection (FI) with amperometric detection at anodized boron-doped diamond (BDD) thin films has been developed and applied for the determination of tetracycline antibiotics (tetracycline, chlortetracycline, oxytetracycline and doxycycline). The electrochemical oxidation of the tetracycline antibiotics was studied at various carbon electrodes including glassy carbon (GC), as-deposited BDD and anodized BDD electrodes using cyclic voltammetry. The anodized BDD electrode exhibited well-defined irreversible cyclic voltammograms for the oxidation of tetracycline antibiotics with the highest current signals compared to the as-deposited BDD and glassy carbon electrodes. Low detection limit of 10 nM (signal-to-noise RATIO = 3) was achieved for each drug when using flow injection analysis with amperometric detection at anodized BDD electrodes. Linear calibrations were obtained from 0.1 to 50 mM for tetracycline and 0.5–50 mM for chlortetracycline, oxytetracycline and doxycycline. The proposed method has been successfully applied to determine the tetracycline antibiotics in some drug formulations. The results obtained in percent found (99.50–103.01%) were comparable to dose labeled.     

Ni电极电化学流通池检测四环素类药品的研究

比较Au、GC和Ni电极对四环素的电化学响应,讨论了纯Ni电极对四环素的电催化氧化特性,提出以纯Ni为工作电极的电化学流通池,优化结构,建立了测定四环素类抗生素的电化学流通池安培检测法.该方法对四环素、土霉素和强力霉素都有较高的响应灵敏度,线性范围0.1～15mg/L.最低检出限分别为35、45和43μg/L.用此方法可以直接测定四环素类药品的含量.     

Influence of micelles on the electrochemical behaviors of catechol and hydroquinone and their simultaneous determination

A simple and highly selective electrochemical method for the simultaneous determination of CAT and HQ at a glassy carbon electrode in micellar solutions has been developed. The electrochemical behaviors of CAT and HQ in aqueous CPB and SDBS micellar solutions have been studied by cyclic voltammetry. The oxidation peak potentials shift negatively, the reduction peak potentials shift positively, and the peak currents increase in the presence of CPB for both CAT and HQ. However, the oxidation peak potentials shift positively, the reduction peak potentials shift negatively, and the peak currents decrease in the presence of SDBS for both CAT and HQ. The electrochemical kinetic parameters for CAT and HQ in aqueous CPB and SDBS micellar solutions were also determined by chronocoulometry (CC) and chronoamperometry (CA). The cyclic and pulse differential voltammetric behaviors of the system consisting of CAT coexisting with HQ were also investigated in this work. It was found that the oxidation peak potential waves of CAT and HQ were separated by 100 mV in the presence of CPB in 0.10 M PBS (pH 6.8). Therefore, CAT and HQ can be determined simultaneously in such a system. This simple method was applied to the simultaneous determination of HQ and CAT in a household tap water sample and it exhibited high selectivity.     

Source of Selectivity in Oxidative Cross‐Coupling of Aryls by Solvent Effect of 1,1,1,3,3,3‐Hexafluoropropan‐2‐ol

Solvents such as 1,1,1,3,3,3‐hexafluoroisopropanol (HFIP) with a high capacity for donating hydrogen bonds generate solvates that enter into selective cross‐coupling reactions of aryls upon oxidation. When electric current is employed for oxidation, reagent effects can be excluded and a decoupling of nucleophilicity from oxidation potential can be achieved. The addition of water or methanol to the electrolyte allows a shift of oxidation potentials in a specific range, creating suitable systems for selective anodic cross‐coupling reactions. The shift in the redox potentials depends on the substitution pattern of the substrate employed. The concept has been expanded from arene–phenol to phenol–phenol as well as phenol–aniline cross‐coupling. This driving force for selectivity in oxidative coupling might also explain previous findings using HFIP and hypervalent iodine reagents.     

Coulometric generation of H(+) and D(+) ions in aqueous media by anodic oxidation of hydrogen and deuterium dissolved in palladium

Coulometric generation of H(+) and D(+) ions in aqueous media by the oxidation of hydrogen and deuterium dissolved in palladium, is described. Hydrogen and deuterium dissolved in palladium were found to be oxidized at more negative potentials than the oxidation potentials of water and other components present. The H(+) and D(+) ions generated were used for the titration of tris(hydroxymethyl) aminomethane, piperidine, triethylamine and sodium tetraborate, the end-point being determined potentiometrically with a glass electrode and an SCE. In titrations of 0.001-0.1M solutions of the bases, the current efficiency was 100%.     

Electroanalysis of tetracycline using nickel-implanted boron-doped diamond thin film electrode applied to flow injection system.

The electrochemical analysis of tetracycline was investigated using nickel-implanted boron-doped diamond thin film electrode by cyclic voltammetry and amperometry with a flow injection system. Cyclic voltammetry was used to study the electrochemical oxidation of tetracycline. Comparison experiments were carried out using as-deposited boron-doped diamond thin film electrode (BDD). Nickel-implanted boron-doped diamond thin film electrode (Ni-DIA) provided well-resolved oxidation irreversible cyclic voltammograms. The current signals were higher than those obtained using the as-deposited BDD electrode. Results using nickel-implanted boron-doped diamond thin film electrode in flow injection system coupled with amperometric detection are presented. The optimum potential for tetracycline was 1.55 V versus Ag/AgCl. The linear range of 1.0 to 100 microM and the detection limit of 10 nM were obtained. In addition, the application for drug formulation was also investigated.     

Nanosecond redox equilibrium method for determining oxidation potentials in organic media

A general, nanosecond equilibrium method is described for determining thermodynamically meaningful oxidation potentials in organic media for compounds that form highly reactive cation radicals upon one-electron oxidation. The method provides oxidation potentials with unusually high precision and accuracy. Redox ladders have been constructed of appropriate reference compounds in dichloromethane and in acetonitrile that can be used to set up electron-transfer equilibria with compounds with unknown oxidation potentials. The method has been successfully applied to determining equilibrium oxidation potentials for a series of aryl-alkylcyclopropanes, whose oxidation potentials were imprecisely known previously. Structure-property trends for oxidation potentials of the cyclopropanes are discussed.     

An insight into the overoxidation of polypyrrole materials

In aqueous solution, under anodic potentials at which water oxidation occurs, the polypyrrole is irreversibly oxidized leading progressively to an insulating material. In this paper, it is evidenced that this overoxidation process is due to the hydroxyl radicals formed during solvent oxidation. Indeed, it is shown that, at open-circuit potential, polypyrrole films are overoxidized in the presence of hydroxyl radicals produce by Fenton’s reagent (H₂O₂/Fe²⁺). On the contrary, the use of hydroxyl radical scavengers, such as methanol and dimethylthiourea, allows one to increase the stability of polypyrrole films under anodic potentials.     

Design of Mononuclear Ruthenium Catalysts for Low‐Overpotential Water Oxidation

Water oxidation is a key reaction in natural photosynthesis and in many schemes for artificial photosynthesis. Inspired by energy challenges and the emerging understanding of photosystem II, the development of artificial molecular catalysts for water oxidation has become a highly active area of research in recent years. In this Focus Review, we describe recent achievements in the development of single‐site ruthenium catalysts for water oxidation with a particular focus on the overpotential of water oxidation. First, we introduce the general scheme to access the high‐valent ruthenium–oxo species, the key species of the water‐oxidation reaction. Next, the mechanisms of the O? O bond formation from the active ruthenium–oxo species are described. We then discuss strategies to decrease the onset potentials of the water‐oxidation reaction. We hope this Focus Review will contribute to the further development of efficient catalysts toward sustainable energy‐conversion systems.     

甲醇是极氧化的现场FTIR透射差谱研究

利用现场透射红外差谱方法研究了在无水1mol/LiClO~4甲醇溶液中甲醇在Pt电极上的阳极氧化。实验采用了细网格Pt电极和薄层电解池。各电位下的FTIR透射差谱反映了溶液中电极反应的变化。结果表明甲醇可被氧化成甲醛,且随电位的提高可进一步氧化成甲酸甲酯。     

Thermodynamics of electron transfer processes in liquid and gas phases: Part II. Correlations of electro-oxidation and ionization potentials with substituent constants for some N,N-dimethylaniline derivatives

The electron transfer processes in the oxidation reactions of a series of N,N-dimethyl-4-substituted anilines in liquid and gaseous phases were studied. By means of a linear regression analysis, half-wave oxidation potentials in acetonitrile. ionization potentials in the gaseous phase, substituent constants and ionization constants of conjugated acids in water or water-alcohol mixtures are related. A thermodynamic cycle allows the calculation of the solvation energies of both radical cations and parent free bases.     

Electrochemical oxidation of thiocyanates on boron-doped diamond electrode in alkaline solutions

Electrochemical oxidation of thiocyanates on a boron-doped diamond electrode in an alkaline medium was studied. An analysis of polarization curves demonstrated that the process of SCN oxidation occurs at water deposition potentials and is controlled by the mass transfer of the substrate to the electrode surface. It is shown that the oxidation efficiency of thiocyanates and the specific electric energy expenditure depend on the current density and on the method by which the process is performed. At a current density of 8 mA cm^?2, more than 90% of thiocyanates is oxidized to CNO, carbon dioxide, and nitrogen with a specific energy expenditure of 26.3 kW h kg^?1 SCN.     

In-situ X-ray absorption spectroscopy study of Pt and Ru chemistry during methanol electrooxidation

Methanol electrooxidation in a 0.5 M sulfuric acid electrolyte containing 1.0 M CH3OH was studied on 30% Pt/carbon and 30% PtRu/carbon (Pt/Ru = 1:1) catalysts using X-ray absorption spectroscopy (XAS). Absorption by Pt and Ru was measured at constant photon energy in the near edge region during linear potential sweeps of 10-50 mV/s between 0.01 and 1.36 V vs rhe. The absorption results were used to follow Pt and Ru oxidation and reduction under transient conditions as well as to monitor Ru dissolution. Both catalysts exhibited higher activity for methanol oxidation at high potential following multiple potential cycles. Correlation of XAS data with the potential sweeps indicates that Pt catalysts lose activity at high potentials due to Pt oxidation. The addition of Ru to Pt accelerates the rate of methanol oxidation at all potentials. Ru is more readily oxidized than Pt, but unlike Pt, its oxidation does not result in a decrease in catalytic activity. PtRu/carbon catalysts underwent significant changes during potential cycling due to Ru loss. Similar current density vs potential results were obtained using the same PtRu/carbon catalyst at the same loading in a membrane electrode assembly half cell with only a Nafion (DuPont) solid electrolyte. The results are interpreted in terms of a bifunctional catalyst mechanism in which Pt surface sites serve to chemisorb and dissociate methanol to protons and carbon monoxide, while Ru surface sites activate water and accelerate the oxidation of the chemisorbed CO intermediate. PtRu/carbon catalysts maintain their activity at very high potentials, which is attributed to the ability of the added Ru to keep Pt present in a reduced state, a necessary requirement for methanol chemisorption and dissociation.     

Relationship of electrochemical oxidation of catechins on their antioxidant activity in microsomal lipid peroxidation.

The oxidation potentials of catechins were measured by employing flow-through column electrolysis. The oxidation potentials of catechins were shown to depend on their structures. At the same time, the antioxidant activity of catechins on NADPH-dependent lipid peroxidation in rat liver microsomes was evaluated. Catechins showed a 50% inhibition of lipid peroxidation in the concentration range of 10-51 microM. Among those studied, galloylated catechins exhibited stronger antioxidant activities than those of nongalloylated catechins. A quantitative relationship has been obtained to describe the antioxidant activity of catechins: log IC50 (microM)= 1.56+2.49E1/2 (V)-0.29 logP (r=0.907), where IC50 represents the concentration for 50% inhibition of lipid peroxidation, E1/2 represents the half-wave potential of the first oxidation wave, and P represents the octanol/water partition coefficient. This relationship suggested two important characteristics determining catechin antioxidant activity, namely the ease of oxidation and the lipophilicity.     

Kinetic determinations of accurate relative oxidation potentials of amines with reactive radical cations

Accurate oxidation potentials for organic compounds are critical for the evaluation of thermodynamic and kinetic properties of their radical cations. Except when using a specialized apparatus, electrochemical oxidation of molecules with reactive radical cations is usually an irreversible process, providing peak potentials, E(p), rather than thermodynamically meaningful oxidation potentials, E(ox). In a previous study on amines with radical cations that underwent rapid decarboxylation, we estimated E(ox) by correcting the E(p) from cyclic voltammetry with rate constants for decarboxylation obtained using laser flash photolysis. Here we use redox equilibration experiments to determine accurate relative oxidation potentials for the same amines. We also describe an extension of these experiments to show how relative oxidation potentials can be obtained in the absence of equilibrium, from a complete kinetic analysis of the reversible redox kinetics. The results provide support for the previous cyclic voltammetry/laser flash photolysis method for determining oxidation potentials.     

Plant bioelectrochemistry: effects of CCCP on electrical signaling in soybean

Carbonyl cyanide 3-chlorophenylhydrazone (CCCP) induces fast action potentials and decreases the variation potential in soybean plants. The propagation speed of the action potentials in a soybean plant produced by CCCP reaches up to 25 m/s. The duration of single action potentials after treatment by CCCP is 0.6 ms. The addition of CCCP to soil reduces variation or streaming potential to zero. The mechanism by which CCCP decreases plant maturation most likely includes depolarization of the plasma membrane, retardation of photosynthetic water oxidation, and respiratory electron transfer.