Towards the optimization of carbon nanotube properties via <Emphasis Type="Italic">in situ</Emphasis> and <Emphasis Type="Italic">ex situ</Emphasis> studies of the growth mechanism

The synthesis conditions of multi-walled carbon nanotubes (MWCNTs) indirectly determine their application potential through the decisive role in the characteristics of individual tubes: diameter distribution, structure and defectiveness of graphene walls, the amount of metal impurities and amorphous carbon. In the present work, we have studied the influence of the catalyst composition and synthesis conditions on the diameter distribution and the structure of nanotube walls. We have observed the influence of the particle size for MWCNT synthesis (i.e. size effect) on catalytic activity by ex situ and in situ techniques: in situ X-ray diffraction on synchrotron radiation (SRXRD), gas chromatography, and ex situ transmission electron microscopy. The data obtained by in situ SRXRD are in agreement with the results collected using laboratory tubular fix-bed catalytic reactor allowing thereby extending the applicability of the approach. For the first time we have shown the increase of the fraction of graphene walls in the total MWCNT diameter with time.     

An <Emphasis Type="Italic">in situ</Emphasis> cell for investigation of the catalyst structure using synchrotron radiation

Design of a cell for in situ characterization of heterogeneous catalysts by X-ray absorption spectroscopy EXAFS/XANES and X-ray diffraction on synchrotron radiation at high temperatures in a controllable gas medium, which was implemented at the Structural Materials Science end-station installed at KCSRNT, is presented. First results on nanostructural evolution of Pt/γ-Al₂O₃, Pd/γ-Al₂O₃ and other catalysts during various treatments — oxidation in oxygen, reduction in H₂/N₂, and annealing in vacuum — are reported.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

<Emphasis Type="Italic">In situ</Emphasis> high-temperature X-ray diffraction measurements: Application to the study of heterogeneous catalysts

When characterizing the phase composition and structure of catalysts, researchers are faced with the problem of reversible effects of temperature and gas medium during their preparation, activation, or operation. Therefore, particular attention is paid to the methods of their research in appropriate conditions, i.e., in situ high-temperature X-ray diffraction. The theoretical framework and experimental features of high-temperature X-ray diffraction techniques are examined. Examples are given of their effective application to the study of the structural features of oxide catalysts under close-to-real conditions.     

A universal blown film apparatus for <Emphasis Type="Italic">in situ</Emphasis> X-ray measurements

A setup of blown film machine combined with in situ synchrotron radiation X-ray diffraction measurements and infrared temperature testing is reported to study the structure evolution of polymers during film blowing. Two homemade auto-lifters are constructed and placed under the blown machine at each end of the beamline platform which move up and down with a speed of 0.05 mm/s bearing the 200 kg weight machine. Therefore, structure development and temperature changes as a function of position on the film bubble can be obtained. The blown film machine is customized to be conveniently installed with precise servo motors and can adjust the processing parameters in a wide range. Meanwhile, the air ring has been redesigned in order to track the structure information of the film bubble immediately after the melt being extruded out from the die exit. Polyethylene (PE) is selected as a model system to verify the feasibility of the apparatus and the in situ experimental techniques. Combining structure information provided by the WAXD and SAXS and the actual temperature obtained from the infrared probe, a full roadmap of structure development during film blowing is constructed and it is helpful to explore the molecular mechanism of structure evolution behind the film blowing processing, which is expected to lead to a better understanding of the physics in polymer processing.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Analysis of <Emphasis Type="Italic">Escherichia coli</Emphasis> nicotinate mononucleotide adenylyltransferase mutants <Emphasis Type="Italic">in vivo</Emphasis> and <Emphasis Type="Italic">in vitro</Emphasis>

Background  

Adenylation of nicotinate mononucleotide to nicotinate adenine dinucleotide is the penultimate step in NAD⁺ synthesis. In Escherichia coli, the enzyme nicotinate mononucleotide adenylyltransferase is encoded by the nadD gene. We have earlier made an initial characterization in vivo of two mutant enzymes, NadD72 and NadD74. Strains with either mutation have decreased intracellular levels of NAD⁺, especially for one of the alleles, nadD72.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Synthesis of <Emphasis Type="Italic">N,N</Emphasis>-disubstituted (<Emphasis Type="Italic">Z</Emphasis>)-<Emphasis Type="Italic">O</Emphasis>-methylnicotinamide oximes

A number of (Z)-N,N-dialkyl- and (Z)-N-acyl-N-alkyl-O-methylnicotinamide oximes was synthesized. Their configuration was confirmed by the NOESY experiment. Evaluation of fungicidal activity of compounds obtained was performed.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.     

Synthesis of <Emphasis Type="Italic">o</Emphasis>(<Emphasis Type="Italic">m</Emphasis>)-carborane-containing azomethines

A method of preparative synthesis of o(m)-carborane-containing azomethines via the condensation of o(m)-carboranyl-C-methylene-4-formylbenzoates with aliphatic, cycloaliphatic, and aromatic amines was developed.     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

<Emphasis Type="Italic">seco</Emphasis>-Kaurane skeleton diterpenoids from <Emphasis Type="Italic">Croton oblongifolius</Emphasis>

A new seco-kaurane type diterpenoid, ent-3,4-seco-17-oxo-kaur-4(19),15(16)-dien-3-oic acid, and a known compound, ent-3,4-seco-kaur-4(19),16(17)-dien-3-oic acid, were isolated from the stem bark of Croton oblongifolius. The structures of these compounds were established on the basis of spectroscopic data.     

The <Emphasis Type="Italic">pVT</Emphasis> properties and phase equilibria in the <Emphasis Type="Italic">n</Emphasis>-pentane-water binary system

The pVT properties of the 0.075 n-C₅H₁₂ + 0.925H₂O binary system were studied experimentally. Thermal properties were measured along nine different isochores over the density and temperature ranges 87–698 kg/m³ and 303–684 K at pressures up to 60 MPa. Measurements were performed using a constant-volume piezometer. Inflection and break points of the p(T) dependences were used to construct phase equilibrium curves, which were described by scaling equations.