四丁基铵离子液体阳离子的离子色谱-直接电导检测法分析

采用离子色谱-直接电导检测的方法对四丁基铵阳离子进行了系统的研究,考察了色谱柱、淋洗液、色谱柱温度及流速对测定四丁基铵阳离子的影响,并讨论了保留规律。用羧酸型阳离子交换色谱柱,以3 mmol·L-1甲烷磺酸-40%乙腈为淋洗液,流速1 m L·min-1,色谱柱温度40℃,四丁基铵阳离子的保留时间小于4 min。本方法测定四丁基铵阳离子的检出限(S/N=3)为0.82 mg·L-1,保留时间和峰面积的相对标准偏差(n=5)分别为0.09%和1.10%。方法用于测定实验室合成的四丁基铵离子液体样品,加标回收率为98%~100.1%。本方法准确、可靠、快速,具有较好的实用性,可满足离子液体样品的检测要求。     

同系物季铵盐离子液体阳离子的离子交换色谱法分析

建立了离子交换色谱-直接电导检测法分离测定3种同系物季铵盐离子液体阳离子(四甲基铵、四乙基铵和四丙基铵阳离子)的方法。采用磺酸型阳离子交换色谱柱,以乙二胺-柠檬酸-乙腈为淋洗液,考察了淋洗液种类、浓度及色谱柱温度对3种阳离子保留的影响。并根据测定对象不同,调整乙二胺浓度及乙腈含量以改善分离效果。淋洗液中增加乙腈含量,可明显缩短四丙基铵阳离子的保留时间,并改善其色谱峰形。季铵阳离子同系物的保留符合碳数规律。优化的色谱条件为:流速1.0 mL/min,色谱柱温度40℃;以0.02 mmol/L乙二胺-0.12 mmol/L柠檬酸(pH 4.0)为淋洗液分离测定四甲基铵;以0.2 mmol/L乙二胺-0.4 mmol/L柠檬酸-1%乙腈(pH 4.0)为淋洗液分离测定四乙基铵和四丙基铵。所测阳离子的检出限(S/N=3)分别为0.015,0.22,1.88 mg/L,相对标准偏差(n=5)均小于2.3%。将方法应用于表面活性剂和实验室合成的离子液体的分析,加标回收率为99%~104%。本方法简单、准确、可靠,具有良好的实用性。     

聚苯乙烯型双季铵树脂的制备及性能研究

三乙烯二胺和四甲基乙二胺与氯甲基聚苯乙烯反应,得到同时含有季铵和叔胺的强-弱碱型树脂,再用碘甲烷季铵化叔胺,制备聚苯乙烯双季铵树脂;另一种方法是将二甲基苄胺型叔胺树脂用4-溴丁基三甲基溴化铵季铵化引入4碳链双季铵基团。反应结果表明,两类强弱碱基树脂的季铵化反应结果并不理想,二甲基苄胺型叔胺树脂季铵化反应的转化率最高为36%。考察了这些新型双季铵树脂的热稳定性及对水溶液中有机酸(如苯磺酸和对-硝基苯乙酸)的吸附、脱附性能。     

ZIF-8的制备及其作为杀菌药物载体的研究

采用室温搅拌法制备了金属有机骨架材料ZIF-8.通过X射线粉末衍射(XRD)、红外光谱(IR)、N2吸附-脱附、透射电子显微镜(TEM)和扫描电子显微镜(SEM)对所得样品进行了表征分析,并以苯扎氯铵为杀菌药物模型,研究了ZIF-8对苯扎氯铵这种药物的载药及体外释药性能.表征结果显示,制备的ZIF-8是一种具有规则十二面体方钠石结构的晶体,BET比表面积为2 643m2/g.载药及体外释放实验表明,ZIF-8对浓度为4mmol/L苯扎氯铵的载药量为43g/100g ZIF-8,载药后的ZIF-8在释放90h后,释放率达84.82%,说明ZIF-8对苯扎氯铵有较好的缓释性能.     

高效液相色谱法测定化妆品中5种季铵盐类防腐剂

建立了高效液相色谱法(HPLC)同时测定化妆品中5种季铵盐类防腐剂(西曲溴铵、西他氯铵、米他氯铵、劳拉氯铵和苄索氯铵)的检测方法。这5种季铵盐类防腐剂在15 min内能达到有效分离,在10~200μg/m L范围内线性良好,检出限在1.11~1.97μg/m L范围内,平均回收率为77.1%~110.2%。     

用于碱性膜燃料电池的新型聚苯醚阴离子交换膜的制备与性能

以2,6-二甲基聚苯醚(PPO)为原料, 经溴代及N-甲基咪唑季铵化反应, 制备了N-甲基咪唑季铵化PPO, 并进行了红外光谱(FTIR)和氢核磁共振波谱(¹H NMR)表征.所得季铵化产物与聚乙烯醇(PVA)按不同比例共混后用戊二醛交联成膜, 在碱性液中浸泡转化为OH^-型, 得到一系列阴离子交换膜.通过扫描电子显微镜(SEM) 、交流阻抗(AC)、拉伸实验和热重分析(TGA)等手段考察了膜的微观形貌及电导率、力学性能、热稳定性及耐碱性等性能.结果表明, 膜的外观形貌平整均一; 含水率为50.4%~151.2%; 溶胀度为79.2%~164.2%; 离子交换容量为0.47~1.52 mmol/g; 90℃时, M4膜的电导率高达49.1 mS/cm; 断裂伸长率达到128%, 极大改善了PPO膜应力易裂的状况.同时, N-甲基咪唑鎓基团分解温度达到170℃, 高于常用的阴离子交换膜中的季铵基团(120℃).在2 mol/L的NaOH溶液中浸泡192 h后, 电导率仅下降19%, 具备良好的耐碱性能力.     

季铵化聚乙烯亚胺的制备

以环氧丙烷为叔胺化试剂,氯化苄为季铵化试剂通过聚乙烯亚胺(PEI)的叔胺化与季铵化反应制备了季铵化的聚乙烯亚胺(QPEI),其结构经IR表征。考察了反应条件对合成QPEI的影响。研究结果表明,使用环氧丙烷,可绿色化地实现PEI链中的伯胺基和仲胺基的叔胺化得到叔胺化的聚乙烯亚胺(TPEI);以氯化苄为季铵化试剂,于50℃反应30 h可使TPEI链中90%以上的叔胺基实现季铵化,从而使PEI链中的总N原子数实现50%以上的季铵化。     

磷酸铵镁沉淀法测定聚马来酸酐氨化体系中的铵离子

通过甲醛法、四苯硼钠沉淀法以及磷酸铵镁沉淀法(MAP)测定模拟体系中铵离子含量,分析比较确定了聚马来酸酐(PMA)与氨气反应产物中铵离子的测定方法,即利用磷酸氢二钠和氯化镁结合铵离子形成磷酸铵镁沉淀,并通过凯式定氮法确定体系中铵离子含量。结果表明,pH值为9.0时,铵离子测定得到了较好的结果,测定平均值为5.50mmol/g,测定平均误差为2.1%,方法有很好的精密度和准确度,能够满足实际测试要求。     

硫氰化铵-溴化十六烷基吡啶体系浮选分离和富集锗

研究了硫氰化铵-溴化十六烷基吡啶(CPB)体系浮选分离锗的行为及与一些金属离子分离的条件。结果表明,在水溶液中,Ge(Ⅳ)与硫氰化铵和溴化十六烷基吡啶形成不溶于水的三元缔合物[Ge(SCN)62-][CPB+]2,此三元缔合物沉淀浮于水相上层形成界面清晰的液-固两相。当溶液中溴化十六烷基吡啶和硫氰化铵的浓度分别为3.0×10-3mol/L和1.5×10-2mol/L时,Ge(Ⅳ)可与Ga(Ⅲ)、Ni(Ⅱ)、Cd(Ⅱ)、Mg(Ⅱ)、Mn(Ⅱ)、Fe(Ⅱ)、Al(Ⅲ)、Cr(Ⅲ)和V(Ⅴ)离子定量分离,Ge(Ⅳ)的浮选率达到98.3%以上。对合成水样中Ge(Ⅳ)的分离和测定,结果满意。该方法在微量锗的分离和富集分析中有一定的实用价值。     

纤维管内固相微萃取-原子荧光光度法测定水中痕量As(Ⅴ)

用聚丙烯纤维作为基体,利用高能电子辐照接枝制备了叔铵化纤维,并采用溴代乙烷季铵化得到季铵型离子交换纤维。将制备的季铵型离子交换纤维用于纤维固相微萃取方法中的吸附剂,与原子荧光光度法相结合,建立了一种简单、快速的测定溶液中痕量As(Ⅴ)的方法。研究了溶液pH、流速、溶液浓度对吸附的影响,并对洗脱剂的种类、洗脱剂的流速和体积进行了优化。在最佳反应条件下,As(Ⅴ)的定量限为0.1μg/L,富集因子为50,相对标准偏差为4.5%(n=6)。该方法可测定复杂基质中痕量As(Ⅴ)。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.