Chromotropic acid,a fluorogenic chelating agent for aluminium(III)

Complexation of aluminium(III) with the fluorogenic ligand chromotropic acid (4,5-dihydroxynaphthalene-2,7-disulfonic acid) has been revisited with the aim of using enhancement of the fluorescence intensity as an analytical tool. Complexation at the optimum pH4 was shown to lead to a 1:1 complex with a stability constant log ₁₁₀=18.4±0.7. The fluorogenic effect was thoroughly investigated. Nearly selective excitation of the chelate rather than the ligand could be achieved at wavelengths longer than 360 nm. For analytical purposes the main interfering ion was Ga³⁺. The strongest competing ligand was shown to be citric acid. Competitive complexation by acetate or formate ions can also make their use in a buffer at the usual concentration, 0.2 mol L^–1, questionable, whereas a 10^–2 mol L^–1 formic acid buffer was shown to be a good alternative. The calibration plot showed that the dependence of response on Al(III) concentration was linear up to 500 g L^–1; the detection limit was 0.65 g L^–1 (3SD _blank, n=10, SD=±1.4% at 10 g L^–1 and ±0.8% at 100 g L^–1). The analytical procedure was successfully applied to several samples of tap water and the results were in good agreement with those from AAS determination.     

Theoretical Study of Chemical Binding of Noble Gas Atom and Transition Metal Complexes: Ng–NiCO, Ng–NiN2, Ng–CoCO (Ng = He–Xe)

Ab initio multireference and coupled cluster methods (MR-SDCI(+Q), CASPT2, CCSD(T)) and density functional theory methods (B3LYP, MPWPW91) have been applied to examine geometrical structures and vibrational frequencies of noble gas (Ng) – transition metal compounds, Ng–NiCO, Ng–NiN₂, and Ng–CoCO (Ng = He, Ne, Ar, Kr, Xe). It is shown that the respective compounds can have a larger binding energy than a typical van der Waals interaction energy. The binding mechanism is explained by a partial electron transfer from a noble gas atom to the low-lying 4s and 3d vacant orbitals of the transition metal atom. Theoretical calculations show that the binding of noble gas atom results in a large shift of the bending frequency: 361.1cm^–1 (NiCO) to 403.5cm^–1 (Ar–NiCO); 308.5cm^–1 (NiN₂) to 354.8cm^–1 (Ar–NiN₂); 373.0cm^–1 (CoCO) to 422.6cm^–1 (Ar–CoCO). The corresponding experimental frequencies determined in solid argon are 409.1cm^–1 (NiCO), 357.0cm^–1 (NiN₂), and 424.9cm^–1 (CoCO), which are much closer to the corresponding frequency of Ar–NiCO, Ar–NiN₂, and Ar–CoCO, respectively.     

Immobilization of Urease and Cholinesterase on the Surface of Semiconductor Transducer for the Development of Light-Addressable Potentiometric Sensors

Various methods for the immobilization of urease and butyrylcholinesterase on the insulator surface of a laser-scanned semiconductor transducer (LSST) have been tested and compared for the development of an enzyme-based light-addressable potentiometric sensor (LAPS). The method of preparing photocurable membranes on LAPS is presented, and a new type of enzyme LAPS with photocurable polymeric enzyme membranes has been elaborated. It was found that sensors prepared by means of covalent bonding and cross-linking with inactive protein (type SIII) and with photocurable membrane matrices (type SIV) are more prospective. The enzyme LAPSensors with photocurable membranes demonstrate a degree of sensitivity close to the theoretical value and working ranges of 6.3·10^–5–1.1·10^–2 and 1·10^–4–1·10^–1molL^–1 urea for acrylamide and acrylate-based membrane matrices, respectively, and 2.5·10^–4–2·10^–1molL^–1 butyrylcholine for an acrylamide membrane matrix. It is shown that such sensors can be also used for the analysis of enzyme inhibitors.     

Nonempirical calculations of the potential-energy fields of the nucleophilic addition of H− and F− to acetylene and methylacetylene molecules

By using the basis 3–21 + G, the minimum-energy routes for the nucleophilic addition to the F^– ion to methylacetylene have been calculated within the framework of the Hartree-Fock-Roothaan method according to and against the Markovnikov rule with the formation of the 1-fluoropropenyl and 2-fluoropropenyl anions. The results have been compared with data from previous calculations of the nucleophilic addition of H^– and F^– to acetylene with the formation of vinyl and fluorovinyl anions, as well as of the nucleophilic addition of H^– to methylacetylene according to and against the Markovnikov rule with the formation of the 1-propenyl and 2-propenyl anions. It has been established that the reaction with H^– is exothermic, while the reaction with F^– is endothermic. The activation energies of the reactions with F^– are lower than the activation energies of the corresponding reactions with H^–. It is shown that the reactions with H^– have a relatively early transition state, while the reactions with F^– are characterized by a later transition state.Translated from Teoreticheskaya i Éxperimental'naya Khimiya, Vol. 28, No. 1, pp. 5–11, January–February, 1992.     

Theoretical Study of Chemical Binding of Noble Gas Atom and Transition Metal Complexes: Ng–NiCO, Ng–NiN2, Ng–CoCO (Ng = He–Xe)

Summary. Ab initio multireference and coupled cluster methods (MR-SDCI(+Q), CASPT2, CCSD(T)) and density functional theory methods (B3LYP, MPWPW91) have been applied to examine geometrical structures and vibrational frequencies of noble gas (Ng) – transition metal compounds, Ng–NiCO, Ng–NiN₂, and Ng–CoCO (Ng = He, Ne, Ar, Kr, Xe). It is shown that the respective compounds can have a larger binding energy than a typical van der Waals interaction energy. The binding mechanism is explained by a partial electron transfer from a noble gas atom to the low-lying 4s and 3d vacant orbitals of the transition metal atom. Theoretical calculations show that the binding of noble gas atom results in a large shift of the bending frequency: 361.1cm^–1 (NiCO) to 403.5cm^–1 (Ar–NiCO); 308.5cm^–1 (NiN₂) to 354.8cm^–1 (Ar–NiN₂); 373.0cm^–1 (CoCO) to 422.6cm^–1 (Ar–CoCO). The corresponding experimental frequencies determined in solid argon are 409.1cm^–1 (NiCO), 357.0cm^–1 (NiN₂), and 424.9cm^–1 (CoCO), which are much closer to the corresponding frequency of Ar–NiCO, Ar–NiN₂, and Ar–CoCO, respectively.     

Ab initio calculations of potential energy surface for reaction of nucleophilic addition of H− ion to methylacetylene

Within the framework of the Hartree-Fock-Roothaan Method, using double- basis sets 3-21++G and (6-31-H-G//3-21++G), the minimum energy paths (MEPs) have been calculated for reactions of nucleophilic addition of the hydride ion H^– to the methylacetylene molecule: CH₃-CCH+H^–[CH₃-CH=CH]^– (1) CH₃-CCH+H^–[CH₃-C=CH₂]^– (2). It has been established that the activation energy for reaction (2) is 7.02 kJ/mole lower than for reaction (1). An analysis has been made of the character of electron density distribution along the MEP of each reaction. It has been shown that distortion of geometry of the reactants plays an important role in intensifying the interaction of the frontier orbitals. The reasons for nonfulfillment of Markownikoff's rule for these reactions have been determined. The results from the calculations are compared with calculations reported in the literature for the related reaction of nucleophilic addition of the hydride ion H^– to the acetylene molecule: HCCH+H^–[CH₂=CH]^–.Translated from Teoreticheskaya i Éxperimental'naya Khimiya, Vol. 21, No. 3, pp. 303–309, May–June, 1985.     

Absorption and fluorescence of complexes of compounds of anthracene carboxylic acids with metal ions in liquid solutions

We have studied the absorption and fluorescent properties of complexes formed by compounds of anthracene-9-carboxylic acid with metal cations in dimethyl sulfoxide and ethanol. The composition and stability of these complexes has been determined. It is shown that when lanthanide ions are added (Ln³⁺) 21 complexes are formed predominantly, i.e., RCOO^– Ln^{3+ –}OOCR, while with Cd²⁺ the complexes are mainly 11, i.e., RCOO^– Cd²⁺. We have considered the principal mechanisms for the deactivation of excitation in complexes based on the RE ions (dipole-dipole energy transfer and electron transfer). The interactions were shown to be inner-sphere in character in the ion triplets, and outer-sphere in the ion pairs. The metal-ligand distance in the 21 complexes is estimated to be 0.5–0.6 nm.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 6, pp. 673–682, November–December, 1989.In conclusion the authors wish to thank A. S. Cherkasov for synthesizing and making available the ACA and for discussing the results of the investigation.     

Thermodynamics of the weak interaction between samarium cation and xylitol in water: A chemical model

The thermodynamic characterization of the weakly complexed model system Sm³⁺-xylitol has been carried out. The standard Gibbs energy enthalpy, entropy, volume and heat capacity of complexation of Sm³⁺ by xylitol have been determined in water at 25°. The stability constant and the enthalpy change have been simultaneously determined by using a calorimetric method. The thermodynamic properties characterizing solely the specific interaction between the cation and the complexing sequence of hydroxyl groups of the ligand have been isolated. The stability constant and the volume of complexation have also been estimated from a similar treatment of the apparent molar volumes. It was found that the reaction between Sm³⁺ and the complexing site of xylitol in water is characterized by: K = 8.1, _rG^o = –5.2 kJ-mol^–1, _rH^o = –13.7 kJ-mol^–1, T_rS^o = –8.5 kJ-mol^–1, _rV^o = 8.8 cm³-mol^–1 and _rC _p ^o = 51 J-K^–1-mol^–1.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

Sorption kinetics of tributyltin on Elbe river biofilms

For the first time detailed sorption kinetics of tributyltin on native Elbe river biofilms are presented. For this purpose a modified annular rotating continuous flow reactor has been used to develop a reproducible biofilm. Important parameters, such as flow rates, sheer forces, and nutrient concentrations could be varied independently and adjusted to natural conditions. Time-resolved sorption kinetics have been carried out with tributyltin, the most toxic compound in many antifouling paints. The highest sorption rates of tributyltin were observed during the first 0–10 min (0.60±0.05 g Sn m^–2min^–1) than they decreased to a value of 0.10±0.10 g Sn m^–2min^–1 (10–90 min) and increased to a value of 0.20±0.05 g Sn m^–2min^–1 (90–120 min).