From encapsulation to polypseudorotaxane: unusual anion networks driven by predesigned metal bis(terpyridine) complex cations

Solvothermal reactions of CuSCN, metal (Mn2+, Fe2+, Co2+, Ni2+, Cu2+) sulfate, and terpyridine (2,2':6',2' '-terpyridine or 4'-p-tolyl-2,2':6',2' '-terpyridine) in the presence of triphenylphosphine yielded a series of hybrid coordination compounds, in which in situ formed metal bis(terpyridine) complex cations are encapsulated by a 3D anionic network or entangled by 2D heartlike networks, forming encapsulation or polypseudorotaxane supramolecules. The complex cations play a role as template to direct the fabrication of the structures.     

Reaction of bis(trimethylsiloxy)phosphine with trimethylsilane

Bis(trimethylsilyl) [3-(trimethylsilyl)propyl]phosphonate and trimethylsilyl [3-(trimethylsilyl)propyl]-phosphinate are obtained by the reaction of bis(trimethylsiloxy)phosphine with trimethylallylsilane and converted into [3-(trimethylsilyl)propyl]phosphinic and [3-(trimethylsilyl)propyl]phosphonic acid, respectively, by the reaction with methanol.     

Polyacrylonitrile–lithium bis(oxalato) borate polymer electrolyte for electrical double layer capacitors

Lithium ion conducting polymer electrolytes based on polyacrylonitrile (PAN) and lithium bis(oxalato)borate (LiBOB) have been prepared and characterized. The polymer electrolytes having PAN:LiBOB weight ratios of 90:10, 80:20, 70:30, 60:40 and 50:50 were prepared using dimethylformamide as solvent. The electrolyte having the composition 50 wt.% PAN–50 wt.% LiBOB shows the highest room temperature conductivity of 2.55 × 10^?5 S cm^?1. This sample demonstrated a lithium ion transference number of 0.25 and a breakdown voltage of 1.6 V. The highest conducting electrolyte was then sandwiched between two symmetrical carbon electrodes to fabricate an electrical double layer capacitor (EDLC). The EDLCs were characterized using impedance measurement, cyclic voltammetry (CV) and galvanostatic charge–discharge tests. The capacitance obtained from impedance measurement is about 35 F g^?1 at frequency 10 mHz. From CV, the capacitance is calculated to be 24 F g^?1 at 10 mV s^?1 scan rate. The discharge capacitance of the EDLCs is determined in the range from 22 to 10 F g^?1 at corresponding discharge currents from 0.2 to 1.5 mA, respectively. This also corresponds to a specific energy from 3.01 to 1.47 W h kg^?1 and a specific power from 380 to 474 W kg^?1, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Properties of ionic liquids containing silver(I) or protic alkylethylenediamine cations with a bis(trifluoromethanesulfonyl)amide anion

Ionic liquids of an N-alkylethylenediamine-silver(I) complex cation (alkyl=hexyl, 2-ethylhexyl, and octyl) or a protic N-alkylethylenediaminium cation (alkyl=butyl, hexyl, 2-ethylhexyl, octyl, decyl, and dodecyl) with a bis(trifluoromethanesulfonyl)amide counter anion (Ag-ILs and PILs, respectively) were prepared and their physicochemical properties were investigated. The trend of solidification decreased in the order octyl?hexyl>2-ethylhexyl for the Ag-ILs, and butyl>dodecyl>decyl>octyl>hexyl?2-ethylhexyl for the PILs. The diffusion coefficients of the cations indicated stronger intermolecular interactions in PILs than in the Ag-ILs because of hydrogen-bonding networks, and it has been revealed that the intermolecular interactions increase in the order, hexyl相似文献   

Molecular conductors with 8,8′-diiodo cobalt bis(dicarbollide) anion

New molecular conductors on the base of 8,8′-diiodo cobalt bis(dicarbollide) anion (TTF)[8,8′-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂] (1), (BMDT-TTF)₄[8,8′-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂] (2) and (BEDT-TTF)₂[8,8′-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂] (3) were synthesized and their crystal structures and electrical conductivities were determined. All the radical cation salts prepared were found to be semiconductors. Some regularities in the crystal structures of the TTF-based radical cation salts with bis(dicarbollide) complexes of transition metals are discussed.     

Syntheses and structures of lanthanide(III) complexes with some bis(pyrazolyl)borate and tris(pyrazolyl)borate podand ligands

Two new poly(pyrazolyl)borate ligands have been prepared: potassium tris[3-{(4-^tbutyl)-pyrid-2-yl}-pyrazol-1-yl]hydroborate (KTp^BuPy) which has three bidentate arms and is therefore hexadentate; and potassium bis[3-(2-pyridyl)-5-(methoxymethyl)pyrazol-1-yl]-dihydroborate (KBp^(COC)Py) which has two bidentate arms and is therefore tetradentate. The crystal structures of their lanthanide complexes [La(Tp^BuPy)(NO₃)₂] and [La(Bp^(COC)Py)₂X] (X=nitrate or triflate) have been determined. In [La(Tp^BuPy)(NO₃)₂] the metal ion is ten-coordinate, from the hexadentate N-donor podand ligand and two bidentate nitrates. [La(Bp^(COC)Py)₂(NO₃)] is also ten-coordinate, from two tetradentate ligands and a bidentate nitrate, but in [La(Bp^(COC)Py)₂(CF₃SO₃)] the metal ion is nine-coordinate because the triflate anion is monodentate. Two unexpected new complexes which arose from partial decomposition of the poly(pyrazolyl)borate ligands have also been characterised structurally. In [La(^BuPypzH)₃(O₃SCF₃)₃] the metal ion is nine-coordinate from three bidentate pyrazolyl-pyridine arms (liberated by decomposition of KTp^BuPy) and three triflate anions; there is extensive NH· · · O hydrogen-bonding between the pyrazolyl and triflate ligands. [Nd(Tp^Py)(Bp^Py)][Nd(PypzH)(NO₃)₄] was isolated from the reaction of hexadentate tris[3-(2-pyridyl)-pyrazol-1-yl]hydroborate (Tp^Py) with Nd(NO₃)₃. One of the Tp^Py ligands has lost one bidentate pyrazolyl-pyridine ‘arm’ (PypzH) to leave tetradentate tris[3-(2-pyridyl)-pyrazol-1-yl]dihydroborate (Bp^Py). In this structure, the cation [Nd(Tp^Py)(Bp^Py)]⁺ is ten-coordinate from inter-leaved hexadentate and tetradentate ligands, and the anion [Nd(PypzH)(NO₃)₄]⁻ is also ten-coordinate from the bidentate N-donor ligand PypzH and four bidentate nitrates.     

Supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts for ethylene polymerization

Silica-supported bis(indenyl)– and bis(fluorenyl)–chromium catalysts show good activity in ethylene polymerization. For maximum productivity with the indenyl chromium catalyst, the silica must be dried, with higher dehydration temperatures giving a significant increase in polymerization activity. Less deactivation on thermal aging of the supported bis(indenyl)–chromium catalyst allows ethylene polymerization to proceed for many hours, which provides polyethylenes of low residual chromium content. In contrast to the behavior of supported chromocene catalysts, the indenyl–and fluorenyl–chromium catalysts require a higher hydrogen/ethylene ratio to achieve a specific polymer melt index. Nevertheless, highly saturated polyethylenes are produced with these new catalysts. This result indicates that chain transfer to hydrogen remains the major chain transfer reaction. Addition of cyclopentadiene to a supported indenyl–chromium catalyst provided a catalyst with a much higher transfer response to hydrogen. This result suggests that ligand exchange occurred, producing a supported chromocene catalyst. These overall results are consistent with an active-site model which comprises a supported divalent chromium center attached to an indenyl or fluorenyl ligand during the polymerization process. Polymerization is believed to occur by a coordinated anionic mechanism of the type previously discussed for a supported chromocene catalyst.     

Kinetics and mechanism of oxidation of the drug mephenesin by bis(hydrogenperiodato)argentate(III) complex anion

Mephenesin is being used as a central‐acting skeletal muscle relaxant. Oxidation of mephenesin by bis(hydrogenperiodato)argentate(III) complex anion, [Ag(HIO₆)₂]^5?, has been studied in aqueous alkaline medium. The major oxidation product of mephenesin has been identified as 3‐(2‐methylphenoxy)‐2‐ketone‐1‐propanol by mass spectrometry. An overall second‐order kinetics has been observed with first order in [Ag(III)] and [mephenesin]. The effects of [OH^?] and periodate concentration on the observed second‐order rate constants k′ have been analyzed, and accordingly an empirical expression has been deduced: k′ = (k_a + k_b[OH^?])K₁/{f([OH^?])[IO^?₄]_tot + K₁}, where [IO^?₄]_tot denotes the total concentration of periodate, k_a = (1.35 ± 0.14) × 10^?2M^?1s^?1 and k_b = 1.06 ± 0.01 M^?2s^?1 at 25.0°C, and ionic strength 0.30 M. Activation parameters associated with k_a and k_b have been calculated. A mechanism has been proposed to involve two pre‐equilibria, leading to formation of a periodato‐Ag(III)‐mephenesin complex. In the subsequent rate‐determining steps, this complex undergoes inner‐sphere electron transfer from the coordinated drug to the metal center by two paths: one path is independent of OH^? whereas the other is facilitated by a hydroxide ion. In the appendix, detailed discussion on the structure of the Ag(III) complex, reactive species, as well as pre‐equilibrium regarding the oxidant is provided. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 440–446, 2007     

Coordinative saturation of cationic niobium– and rhodium–argon complexes

Mass spectra of Nb⁺ and Rh⁺ complexes with argon ligands exhibit `magic' peaks Nb⁺Ar₄ and Rh⁺Ar₆, similar to observations for V⁺Ar₄ and Co⁺Ar₆, indicating coordinative saturation. A consistent explanation is obtained by assuming that the rare gas ligands seek out electron density minima in the valence shell of the ion, which permit a closer approach to the metal core and a stronger charge-induced dipole bond. Ab initio density functional calculations, which predict stable square planar complexes for the d⁴ ions and octahedral for the d⁸ species, support this interpretation and show that rare gas complexes of d⁴ metal ions fit perfectly well into the coordination chemical framework based on the Jahn–Teller effect.     

Kinetic and mechanistic studies on the oxidation of pyrrolidine by bis(hydrogenperiodato)argentate(III) complex anion

The kinetics of oxidation of pyrrolidine by bis(hydrogenperiodato)argentate(III) complex anion ([Ag(HIO₆)₂]^5?) was studied in alkaline medium, with reaction temperatures in the range of 15.0–30.0 °C. The experiments indicated that the oxidation follows an overall second-order reaction, being first-order in both Ag(III) and pyrrolidine. The observed second-order rate constants, k′, decreased with increasing [IO₄ ^?] but increased slightly with increasing [OH^?]. The influence of ionic strength on the reaction rate was also investigated. The oxidation resulted in oxidative deamination of pyrrolidine, giving 4-hydroxybutyrate as the product. A reaction mechanism is proposed which includes an equilibrium between [Ag(HIO₆)₂]^5? and [Ag(HIO₆)₂(OH)(H₂O)]^2?; these two Ag(III) species are reduced by pyrrolidine in parallel rate-determining steps. The rate equation derived from the proposed mechanism can explain the experimental observations. The rate constants of the rate-determining steps, together with the associated activation parameters, were calculated accordingly.     

A chloro-bridged dimanganese complex and an oxo-bridged dititanium complex of a ditopic bis(pyrazol-1-yl)borate ligand

The synthesis and crystal structure analysis of the ditopic p-phenylene-bridged bis(pyrazol-1-yl)borate [[p-C6H4(Bpz2tBu)2]Li2] (LLi2; pz=pyrazol-1-yl) is described. A salt metathesis reaction between LLi2 and MnCl2 in THF leads to the dinuclear complex [L[Mn(THF)]2(mu-Cl)2] featuring a central diamond MnII-(mu-Cl)2-MnII core (X-ray crystal structure analysis). Treatment of LLi2 with 2 equiv of [Ti(NMe2)3Cl] gives the dinuclear titanium compound [L[Ti(NMe2)3]2]. Upon reaction of LLi2 with [Ti(NMe2)2Cl2] and water, the mu-oxo-bridged dititanium species [L[Ti(NMe2)Cl]2(mu-O)] is obtained in excellent yield (X-ray crystal structure analysis).     

Transition metal complexes of hydrotris(imidazolyl)borate anion

The preparation and characterization of the ligand potassium hydrotris(imidazolyl)borate and some of its complexes with transition metals is reported. These complexes have apparently an octahedral structure except the Cu(II) complex which seems to have a square planar geometry. The values of the ligand field parameters 10Dq, B and β have been evaluated for most of these complexes.